KOA SPEER ELECTRONICS, INC. SS-219 R6 AHA 12/19/01 Multi Layer Ferrite Chip Beads Type MCB CERTIFIED 1. General Designed to reduce noise at high frequencies Standard EIA Packages: 0402, 0603, 0805, 1206 Nickel barrier with solder overcoat for excellent solderability Magnetically shielded 2. 2.1 Dimensions Table 1 W L H Terminations (metalization bands) Part L 0402 0.0390.004 (1.000.10) 0.0200.004 (0.500.10) 0.0200.004 (0.500.10) 0.0100.004 (0.250.10) 0603 0.0630.006 (1.600.15) 0.0310.006 (0.800.15) 0.0310.006 (0.800.15) 0.0140.006 (0.360.15) 0805 0.0790.008 (2.000.20) 0.0490.008 (1.250.20) 0.0350.008 (0.900.20) 0.0200.010 (0.510.25) 1206 0.1260.008 (3.200.20) 0.0630.008 (1.600.20) 0.0430.008 (1.100.20) 0.0200.010 (0.510.25) P Solder Dimensions - inches (mm) W H P Nickel Silver Metalization Electrodes 3. Ordering and Specifying Information* MCB 0603 G TE 500 J Type Size Material Packaging Impedance Tolerance 0402 0603 0805 1206 Permability Code: F G S L P * Please note: KSE's part numbers do not contain any spaces or hyphens. Bolivar Drive P.O. Box 547 TE: 7" Embossed Plastic 2 Significant Figure T: 7" Paper Tape + 1 Multiplier (0402 size only) Example: 500 = 50 0402: 10,000 pcs/reel 0603: 4,000 pcs/reel 0805: 4,000 pcs/reel 1206: 3,000 pcs/reel J:5% K:10% M:20% P:25% PAGE 1 OF 8 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R6 4. Standard Applications Impedance @ 100MHz Maximum DC Resistance Allowable DC Current (mA) MCB0402GT100* MCB0402GT150* MCB0402GT700* MCB0402GT121* MCB0402GT221* MCB0402GT601* MCB0402GT102* MCB0603GTE300* MCB0603GTE400* MCB0603GTE600* MCB0603GTE750* MCB0603GTE800* MCB0603GTE900* MCB0603GTE101* MCB0603GTE121* MCB0603GTE141* MCB0603GTE151* MCB0603GTE181* MCB0603GTE221* MCB0603GTE301* MCB0603GTE421* MCB0603GTE601* MCB0603GTE102* 10 15 70 120 220 600 1000 30 40 60 75 80 90 100 120 140 150 180 220 300 420 600 1,000 0.05 0.07 0.4 0.5 0.7 1.1 1.5 0.1 0.1 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.35 0.4 0.45 0.6 500 300 200 200 100 50 50 400 400 300 300 300 250 250 250 250 250 250 250 230 210 210 190 MCB0603GTE152* MCB0603GTE182* MCB0603GTE202* 1,500 1,800 2,000 0.85 0.95 0.8 100 50 50 MCB0603STE180* MCB0603STE121* MCB0603STE141* 18 120 140 0.1 0.4 0.3 400 200 200 Ordering Code Operating Temperature -55C to 125C T: Paper Tape (0402 size only) TE: Embossed Plastic * Add Tolerance Character (J, K, M, P) Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 PAGE 2 OF 8 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R6 4. Standard Applications (continued) Impedance @ 100MHz Maximum DC Resistance Allowable DC Current (mA) MCB0603STE421* 420 0.5 200 MCB0603STE601* MCB0603STE721* 600 720 0.65 0.7 200 150 MCB0603STE102* MCB0805FTE050* MCB0805FTE070* 1,000 5 7 0.6 0.07 0.1 50 800 800 MCB0805FTE100* MCB0805FTE110* MCB0805FTE170* MCB0805FTE300* MCB0805FTE400* MCB0805FTE500* MCB0805FTE600* MCB0805FTE750* MCB0805FTE800* MCB0805GTE900* 10 11 17 30 40 50 60 75 80 90 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.15 0.15 800 800 800 800 800 800 800 800 400 400 MCB0805GTE101* MCB0805GTE121* MCB0805GTE151* MCB0805GTE181* MCB0805GTE201* MCB0805GTE301* MCB0805GTE401* MCB0805GTE421* MCB0805GTE601* MCB0805GTE751* MCB0805GTE102* MCB0805GTE152* 100 120 150 180 200 300 400 420 600 750 1,000 1,500 0.15 0.15 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.55 400 400 200 200 200 200 200 200 200 200 200 200 MCB0805GTE182* 1,800 0.8 200 Ordering Code Operating Temperature -55C to 125C TE: Embossed Plastic * Add Tolerance Character (J, K, M, P) Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 PAGE 3 OF 8 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R6 4. Standard Applications (continued) Impedance @ 100MHz Maximum DC Resistance Allowable DC Current (mA) MCB0805GTE202* 2,000 0.7 200 MCB0805STE272* 2,700 0.8 200 MCB0805LTE601* 600 0.4 100 MCB0805STE180* MCB0805STE201* MCB0805STE601* MCB0805STE751* 18 200 600 750 0.1 0.4 0.4 0.7 600 200 200 200 MCB0805STE102* 1,000 0.75 100 MCB1206FTE190* MCB1206FTE260* 19 26 0.1 0.1 600 600 MCB1206FTE300* MCB1206FTE310* MCB1206FTE500* MCB1206FTE600* MCB1206FTE700* MCB1206FTE800* 30 31 50 60 70 80 0.1 0.1 0.1 0.1 0.1 0.2 600 600 600 600 200 400 MCB1206FTE900* MCB1206FTE101* MCB1206FTE121* 90 100 120 0.2 0.2 0.2 400 400 400 MCB1206FTE151* MCB1206FTE201* 150 200 0.15 0.3 300 300 MCB1206FTE301* 300 0.4 300 MCB1206FTE601* MCB1206GTE102* MCB1206GTE152* 600 1,000 1,500 @ 50MHz 0.5 0.7 0.9 200 150 100 MCB1206GTE202* 2,000 @ 30MHz 0.6 100 MCB1206STE300* MCB1206STE181* MCB1206STE601* 30 180 600 0.1 0.3 0.3 600 300 200 Ordering Code Operating Temperature -55C to 125C TE: Embossed Plastic * Add Tolerance Character (J, K, M, P) Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 PAGE 4 OF 8 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R6 5. Characteristics Item Requirement Operating Temperature -55C ~ +125C Storage Temperature 40C @ 70% Humidity Sealed plastic bags with desiccant shall be used to reduce the potential of oxidation on the terminations during storage. Resistance to Solder Heat Change in Impedance: Relative to value before test 20%. Appearance: There shall be no cracking Solder Coverage: More than 75% of the terminal electrode shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Preheat: 150C 10C Preheat Time: 60 sec Solder Temp: 260C 5C Dip Time: 10 1 sec Solderability Solder Coverage: More than 95% of the termination shall be covered with solder. Flux: 5-10 sec dip After Flux: Air dry for 15 sec Solder Temp: 245C 5C Dip Time: 5 0.5 sec Leach Resistance Appearance: There shall be no visible signs of physical or mechanical damage (i.e. no cracks) Terminations: Termination must not be leached away for more than 5%. The bead shall be subjected to the following 5 steps for the period of time shown below. The 5 steps constitute one (1) rotation. 4 rotations shall be carried out. 1) Flux: 5-10 sec 2) After Flux: Air dry for 15 sec 3) Solder Temp: 230C 5C 4) Dip Time: 5 0.5 sec 5) Cool: Air cool for 60 seconds Insulation Resistance Insulation Resistance: Min 1G ohms Solvent Resistance Change in Impedance: Relative to value before test 10%. Terminal Strength (hanging test) Appearance: The terminal electrode shall not break off, nor shall there be damage to the body. Terminal Strength (push test) Conditions Cleaning by: Washer: Ultrasonic washer (100W) Solvent: Isopropyl alcohol Time: 3 minutes Appearance: There shall be no evidence of mechanical degradations to terminals or body. Type 0402 0603 0805 1206 W(kgf) Type 0402 0603 0805 1206 W(kgf) Time N/A 30 sec 2 sec 30 sec 2 sec 30 sec 2 sec 0.5 1.0 1.5 Time N/A 60 sec 60 sec 60 sec 1.4 1.8 2.3 PAGE 5 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R6 5. Characteristics (continued) Item Requirement Conditions Bending Strength Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test 10% Board: 90x40x1.6mm Bend: 1mm Time: 5 sec Mechanical Shock Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value before test 10% Force: 50G Time: 11 msec There shall be 3 shocks in each of 6 directions (18 shocks total). Vibration Impedance: Relative to initial value 10% Only endurance conditioning by sweeping shall be made. The entire frequency range from 10-2,000Hz and return to 10Hz in 20 minutes (this shall constitute one cycle). Amplitude: 1.5mm The test shall have a 15G peak and shall be applied for a period of 4 hours (12 cycles) in each of 3 mutually perpendicular directions (a total of 36 cycles within a total of 12 hours). Thermal Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value 20%. DCR: The DCR shall not exceed initial specified value. Testing of the parts will be made at 0 hours, 250 hours and 500 hours. Before testing the parts shall be allowed to cool to room temperature for 24 hours. Load Humidity Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value 15% Step 1-start 2-hold 3-transfer 4-hold 5-transfer Temperature -40C 2C -40C 2C -- +105C 2C -- Time -- 30 min 5 min 0.5 min max. 30 min 5 min 0.5 min max. Steps 1 thru 5 constitute one complete cycle and the test shall consist of a total of 500 cycles. Temperature: 85C 2C Relative Humidity: 85% Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Life Test Appearance: There shall be no physical or mechanical damage Impedance: Relative to initial value 15% Temperature: 85C 2C Time: 1,000 hours total Apply: 100% rated current Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. PAGE 6 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R6 6. Packaging Specifications KOA's multilayer components are provided on tape-and-reel for use in pick-and-place machines. The reel size is 7 inch. 7. Dimensions - inches (mm) Tape Ao Bo Do Ko 0402 0.0260.004 0.0460.004 0.0250.004 (1005) (0.650.1) (1.170.1) (0.630.1) 0603 0.0430.002 0.0750.002 0.0430.002 (1608) (1.90.1) (1.10.1) (1.10.1) P2 Po t E F W Bo 0805 0.0630.002 0.0930.002 0.0460.002 (2012) (1.60.1) (2.40.1) (1.20.1) 1206 0.0710.002 0.1380.002 0.0480.002 (3216) (1.80.1) (3.50.1) (1.20.1) Tape E F W D1 P1 Po Ao P1 P2 Do Ko D1 t 0.0400.002 (1.00.05) 0.0790.004 (2.00.1) 0402 N/A (1005) 0603 (1608) 0.0690.004 0.1380.002 0.3180.002 0.1570.004 0.0590.004 0805 (1.750.10) (3.50.005) (8.10.1) 0.1570.004 (4.00.1) 0.0790.002 (1.5+0.1/-0.0) 0.039 min. (2012) (2.000.05) (1.0 min.) (4.00.1) 1206 (3216) 0.0090.001 (0.230.02) 8. Chip Quantities Per Reel Chip Size Parts on 7 inch (178mm) Reel 0402 (1005) 10,000 0603 (1608) 4,000 0805 (2012) 4,000 1206 (3216) 3,000 PAGE 7 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com KOA SPEER ELECTRONICS, INC. SS-219 R6 9. Recommended PC Board Land Patterns - mm (inches) Chip Size L G H 0402 (1005) 1.3 (0.051) 0.4 (0.016) 0.5 (0.020) 0603 (1608) 2.6 (0.102) 0.6 (0.023) 0.8 (0.031) 0805 (2012) 3.0 (0.118) 1.0 (0.039) 1.0 (0.039) G 1206 (3216) 4.4 (0.173) 2.2 (0.087) 1.4 (0.055) L H 10. Recommended Temperature Profiles for Soldering Recommended Temperature Profile for Wave Soldering Preheat 100 Seconds Max. Soldering 10 Seconds Max. Recommended Temperature Profile for Reflow Soldering Natural Cooling Preheat 100 Seconds Max. 250C Soldering 10 Seconds Max. Natural Cooling 250C 200C 150C 150C 20 Seconds Max. 60 Seconds Max. 60 Seconds Max. PAGE 8 OF 8 Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA 814-362-5536 Fax 814-362-8883 www.koaspeer.com Notice: The information contained in this Spec Sheet is believed to be accurate and up-to-date. KOA Speer Electronics reserves this right to change these specifications without notice.