0 Items Sign In
SHOP BLOG LEARN FORUMS VIDEOS
BREAKOUT BOARDS / OTHER / DS2413 1-WIRE TWO GPIO CONTROLLER BREAKOUT
DESCRIPTION
You're too cool for I2C, and SPI has so many wires, 8-bit parallel... how can that be
fashionable!? You are a 1-Wire kinda gal, and you want more 1-Wire breakouts in your life to
complement all of your great engineering. Well rock on, because here you go, it's a 1-Wire
controller with two open-drain GPIO.
You can put as many of the DS2413's as you want on a single I/O line, each one is uniquely
addressable and shares the single I/O pin happily. The two controllable I/O lines (PIOA and
PIOB) can be used as inputs or outputs. They are open-drain, so if you want to power an LED
or something, you'll need a remote power supply (see Maxim's product page for more details)
We have a basic Arduino sketch that uses the OneWire library to communicate with this chip.
Don't forget to add the 4.7Kohm resistor from I/O to your 1-Wire controller power supply (3.3V -
5V) on the Arduino side of the wires.
New Products 10/5/2013
1
ADD TO CART
DS2413 1-Wire Two
GPIO Controller
Breakout
PRODUCT ID: 1551
71 IN STOCK
1-9
10-99
100+
ADD TO WISHLIST
DESCRIPTION
TECHNICAL DETAILS
DS2413 1-Wire Two GPIO Controller Breakout (4:45)
TECHNICAL DETAILS
LEARN
MAY WE ALSO SUGGEST...
Dimensions: 15.78mm / 0.62" x 9.96mm / 0.39" x 2.94mm / 0.11"
Schematics, EagleCAD PCB files, datasheets and more in the tutorial!
Adafruit 1-Wire GPIO
Breakout - DS2413
Running out of pins on your
Arduino?
DS18B20 Digital
temperature sensor +
High Temp Waterproof
DS18B20 Digital
Waterproof DS18B20 Digital
temperature sensor +
Thermocouple Amplifier
with 1-Wire Breakout Board -
Analog Output K-Type
Thermocouple Amplifier -
EXPAND TO SEE DISTRIBUTORS
DISTRIBUTORS
CONTACT
SUPPORT
DISTRIBUTORS
EDUCATORS
JOBS
FAQ
SHIPPING & RETURNS
TERMS OF SERVICE
PRIVACY & LEGAL
"Let us stand on each other’s
shoulders, not each other’s toes" -
Dennis Allison
