Chokes and inductors For high frequency and EMC RF chokes, SBC series Series/Type: B82141A / B82141B %BUB4IFFU November 2005 Date: (c) EPCOS AG 2005. Reproduction, publication and dissemination of this publication and the information contained therein without EPCOS' prior express consent is prohibited. RF chokes B82141A SBC series B82141B SBC choke (Small Bobbin Core) Rated current 55 to 725 mA Rated inductance 1 to 1000 NH Construction Mini ferrite drum core Winding: enamel copper wire Flame-retardant lacquer coating Features Small size Relatively high rated current RoHS-compatible (see page 6) Applications RF blocking and filtering Decoupling and interference suppression For electronic household appliances, automotive and entertainment electronics Terminals Central axial leads, lead-free tinned Radially bent to 5 mm lead spacing Marking Inductance indicated by color bands to IEC 60062 Delivery mode Taped, Ammo and reel packing (see page 8) Dimensional drawings B82141A (axial leads, taped) B82141B (central radial leads, taped) 3.5 min. 12,5 6.8 max. (IEC 60294) 16 60.5 50.25 50.25 o3 max. o0.6 max. 651 53 9.8 max. 5 lacquered/lackiert 12,7 IND0428-3 IND0116-4 Minimum lead spacing 10 mm Schematic drawing (details page 8) Approx. weight 0.22 g Please read the Important notes at the end of this document. 2 11/05 RF chokes B82141A SBC series B82141B Characteristics and ordering codes For further technical data see page 6. Tolerance1) Qmin MHz mA MHz Ordering code 2) (reel packing) 3) 10 % ^ K 40 7.96 725 0.19 180 B82141+1102K000 40 7.96 700 0.20 160 B82141+1122K000 1.5 40 7.96 670 0.22 155 B82141+1152K000 1.8 45 7.96 660 0.23 145 B82141+1182K000 2.2 45 7.96 630 0.25 130 B82141+1222K000 2.7 45 7.96 610 0.27 110 B82141+1272K000 3.3 50 7.96 580 0.30 90 B82141+1332K000 3.9 50 7.96 560 0.32 70 B82141+1392K000 4.7 50 7.96 530 0.36 60 B82141+1472K000 5.6 50 7.96 510 0.38 50 B82141+1562K000 6.8 50 7.96 480 0.43 40 B82141+1682K000 8.2 50 7.96 450 0.52 30 B82141+1822K000 10 55 2.52 410 0.60 25 B82141+1103K000 12 55 2.52 385 0.67 20 B82141+1123K000 15 55 2.52 365 0.74 17 B82141+1153K000 18 55 2.52 350 0.81 14 B82141+1183K000 22 55 2.52 335 0.90 12 B82141+1223K000 27 55 2.52 315 1.00 11 B82141+1273K000 33 55 2.52 300 1.12 10 B82141+1333K000 39 55 2.52 285 1.21 LR H 1.0 1.2 fQ IR Rmax fres, min 8.5 1) Closer tolerances upon request. 2) Replace the + by code letter A for axial taping or by B for radial taping. 3) For Ammo pack the last digit has to be a 9. Example: B82141A1102K009. Please read the Important notes at the end of this document. 3 11/05 B82141+1393K000 RF chokes B82141A SBC series B82141B Characteristics and ordering codes (continued) For further technical data see page 5. Rmax MHz mA 2.52 200 2.40 7.7 B82141+1473J000 55 2.52 195 2.60 6.8 B82141+1563J000 68 55 2.52 185 2.90 5.7 B82141+1683J000 82 55 2.52 175 3.20 5.5 B82141+1823J000 100 60 0.796 170 3.50 5.3 B82141+1104J000 120 60 0.796 160 3.80 5.0 B82141+1124J000 150 60 0.796 150 4.30 4.6 B82141+1154J000 180 60 0.796 135 5.30 4.2 B82141+1184J000 220 60 0.796 130 5.80 3.8 B82141+1224J000 270 60 0.796 115 7.80 3.2 B82141+1274J000 330 60 0.796 105 9.10 3.0 B82141+1334J000 390 60 0.796 95 11.0 2.7 B82141+1394J000 470 60 0.796 90 12.0 2.3 B82141+1474J000 560 60 0.796 75 16.5 2.2 B82141+1564J000 680 60 0.796 65 22.0 2.0 B82141+1684J000 820 60 0.796 60 25.0 1.8 B82141+1824J000 1000 60 0.796 55 33.0 1.5 B82141+1105J000 H 47 56 Tolerance1) Qmin 5% ^ J 55 fQ fres, min Ordering code 2) (reel packing)3) IR LR MHz 1) Closer tolerances upon request. 2) Replace the + by code letter A for axial taping or by B for radial taping. 3) For Ammo pack the last digit has to be a 9. Example: B82141B1473J009. Please read the Important notes at the end of this document. 4 11/05 RF chokes B82141A SBC series B82141B Impedance |Z | versus frequency f measured with impedance analyzer HP 4191A / HP 4194A IND0117-5 10 6 IND0118-7 10 4 B82141A/B | Z| Inductance L versus DC load current IDC measured with LCR meter HP 4275A B82141A/B H L 10 5 1000 H 10 3 10 4 100 H 10 2 10 3 10 H 10 1 1 H 10 H 100 H 1000 H 10 2 10 1 10 0 6 10 10 7 10 8 Hz 10 f 10 9 _1 10 Q factor versus frequency f measured with impedance analyzer HP 4194A _2 10 _1 10 0 A 10 1 I DC Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 40 C) IND0119-9 100 1 H 10 0 IND0552-S-E 1.2 B82141A/B I op IR Q 1000 H 100 H 10 H 1 H 1.0 0.8 0.6 50 0.4 0.2 0 10 4 10 5 10 6 10 7 0 Hz 10 8 f Please read the Important notes at the end of this document. 0 20 40 60 80 100 C 140 TA 5 11/05 RF chokes B82141A SBC series B82141B General technical data Rated inductance LR Measuring frequency: L 10 H = 1 MHz 10 H < L 4700 H = 100 kHz L > 4700 H = 10 kHz Measuring current: 1 mA Distance between measuring clamps: 25.4 mm Q factor Qmin Measured with HP 4342A Rated current IR Maximum permissible DC current referred to 40 C ambient temperature, for derating see below Inductance decrease L/L0 10% (referred to initial value) at IR at 20 C ambient temperature DC resistance Rmax Measured at 20 C ambient temperature, distance between measuring clamps: 25.4 mm Resonance frequency fres, min Measured with Scalar Network Analyzer ZAS from Rohde & Schwarz Climatic category 55/125/56 (-55 C/+125 C/56 days damp heat test) to IEC 60068-1 Solderability 235 C, 2 s, 90% wetting to IEC 60068-2-20, test Ta Resistance to soldering heat To IEC 60068-2-20, test Tb 260 C, 10 s Tensile strength of leads To IEC 60068-2-21, test Ua 20 N RoHS-compatible RoHS-compatible is defined as compatible with the following documents: DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 13 February 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment COM (2004) 606 final Proposal for a COUNCIL DECISION amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment. Mounting information When bending the leads, take care that the start-of-winding areas at the face ends (protected by glue and lacquer) are not subjected to any mechanical stress. Please read the Important notes at the end of this document. 6 11/05 RF chokes B82141A SBC series B82141B Color coding of the inductance value The inductance value and tolerance are encoded by means of colored bands in accordance with IEC 60062. The basic unit is H. 1st band 2nd band 3rd band 4th band 1st digit of inductance value 2nd digit of inductance value multiplier, i.e. the power of ten, by which the first two digits have to be multiplied. tolerance of the inductance value. Color code 1st band = 1st digit 2nd band = 2nd digit 3rd band = multiplier Colorless -- -- -- Silver -- -- x 10-2 H = Gold -- -- Black -- 0 4th band = tolerance 20 % (M) 0.01 H 10 % (K) x 10-1 H = 0.1 H 5 % (J) x 100 H = 1,01 H -- Brown 1 1 x H = 10,01 H Red 2 2 x 102 H = 100,01 H Orange 3 3 x 103 H = 1000,01 H Yellow 4 4 x 104 H = 10000,01 H Green 5 5 x 105 H = 100000,01 H Blue 6 6 Violet 7 7 Grey 8 8 White 9 9 101 2 % (G) Special designs manufactured to customer specifications are identified by a white tolerance band. Examples: 1st band 2nd band 3rd band Yellow 4 Violet 7 Gold Silver x 0.1 H 10 % = 47 x Brown 1 Green 5 Red Gold x 100,0 H 5 % = 15 x 100,0 H 5 % = 1500,0 H 5 % Please read the Important notes at the end of this document. 4th band 7 Decoding 11/05 0.1 H 10 % = 4.7 H 10 % RF chokes B82141A SBC series B82141B Taping and packing Axially taped (to IEC 60286-1) 6.8 max. (IEC 60294) 3.5 min. 60.5 50.25 50.25 o3 max. o0.6 max. 651 53 9.8 max. lacquered/lackiert IND0428-3 _ 0.5 9 +0.75 6 min. _ 0.5 18 +1 0.5 max. 0.6 max. 1.3 max. insulated isoliert 29 max. 2 max. 9.8 max. lacquered/lackiert 2 max. 160.5 o3 max. 1.3 max. 6.8 max. (IEC 60294) Radially taped (to IEC 60286-2) _ 0.1 5 +0.6 3.80.7 40.2 0.70.2 12.70.3 Please read the Important notes at the end of this document. IND0445-5 8 11/05 RF chokes B82141A SBC series B82141B 30 o90 30 o82+1 o360 _ 1 o30.50.15 Reel packing 30 Axial n Label Etikett w IND0452-V Radial n (mm) 72 +1 42 +1 w (mm) 84 max. 54 max. Ammo pack H Axial L (mm) L B (mm) H (mm B SSB1858-W Packing units Reel packing pcs./reel Ammo pack pcs./pack. Axial 5000 5000 Radial 2000 2500 Please read the Important notes at the end of this document. 9 11/05 Radial 310 max. 340 max. 75 max. 50 max. 120 max. 210 max. Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SilverCap, SIFI, SIMID, SIKOREL, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 10 11/05