Marketing Bulletin DATE: May 1st, 2008 TO: All Sales Personnel FROM: Isaac Gonzalez RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective May 1st, 2008: Series EC Description Resistance Welded HC-49/U Crystal Recommended Replacement EU Series In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2009, with delivery to conclude by December 31st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234 EC Series EC * HC-49/U package * AT cut * Resistance weld seal * Tight tolerance/stability * Tape and reel, vinyl sleeve, insulator tab, third lead, and custom lead length options available NOTES H 13.58 L 11.18 W 4.70 CRYSTAL __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 1.8432MHz to 65.000MHz Frequency Tolerance / Stability 50ppm / 100ppm (Standard), 30ppm / 50ppm, Over Operating Temperature Range 15ppm / 30ppm, *15ppm / 20ppm, or 10ppm / 15ppm Operating Temperature Range 0C to 70C (Standard), -20C to 70C, or -40C to 85C Aging (at 25C) 5ppm / year Maximum Storage Temperature Range -40C to 85C Shunt Capacitance 7pF Maximum Insulation Resistance 500 Megaohms Minimum at 100VDC Drive Level 2 mWatts Maximum Load Capacitance (CL) 18pF (Standard), Custom CL 10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range ESR () Mode / Cut Frequency Range ESR () Mode / Cut 1.8432MHz to 1.999MHz 650 Max Fundamental / AT 4.100MHz to 4.999MHz 80 Max Fundamental / AT 2.000MHz to 2.399MHz 550 Max Fundamental / AT 5.000MHz to 5.999MHz 75 Max Fundamental / AT 2.400MHz to 2.999MHz 350 Max Fundamental / AT 6.000MHz to 6.999MHz 50 Max Fundamental / AT 3.000MHz to 3.199MHz 250 Max Fundamental / AT 7.000MHz to 7.999MHz 40 Max Fundamental / AT 3.200MHz to 3.499MHz 200 Max Fundamental / AT 8.000MHz to 9.999MHz 35 Max Fundamental / AT 3.500MHz to 3.599MHz 180 Max Fundamental / AT 10.000MHz to 12.999MHz 30 Max Fundamental / AT 3.600MHz to 3.899MHz 150 Max Fundamental / AT 13.000MHz to 32.768MHz 25 Max Fundamental / AT 3.900MHz to 3.999MHz 120 Max Fundamental / AT 24.000MHz to 29.999MHz 60 Max Third Overtone / AT 4.000MHz to 4.099MHz 100 Max Fundamental / AT 30.000MHz to 65.000MHz 40 Max Third Overtone / AT MANUFACTURER CATEGORY SERIES PACKAGE CLASS ECLIPTEK CORP. CRYSTAL EC HC-49/U CR05 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 11/07 Specifications subject to change without notice. PART NUMBERING GUIDE EC A T - 20 - 30.000M - G TR FREQUENCY TOLERANCE / STABILITY Blank=50ppm at 25C, 100ppm from 0C to 70C A=50ppm at 25C, 100ppm from -20C to 70C B=50ppm at 25C, 100ppm from -40C to 85C C=30ppm at 25C, 50ppm from 0C to 70C D=30ppm at 25C, 50ppm from -20C to 70C E=30ppm at 25C, 50ppm from -40C to 85C F=15ppm at 25C, 30ppm from 0C to 70C G=15ppm at 25C, 30ppm from -20C to 70C H=15ppm at 25C, 30ppm from -40C to 85C J=15ppm at 25C, 20ppm from 0C to 70C K=15ppm at 25C, 20ppm from -20C to 70C L=15ppm at 25C, 20ppm from -40C to 85C M=10ppm at 25C, 15ppm from 0C to 70C N=10ppm at 25C, 15ppm from -20C to 70C PACKAGING OPTIONS Blank=Bulk, A=Tray, TR=Tape and Reel AVAILABLE OPTIONS Blank=None (Standard), CLXXX=Custom Lead Length(pp46) G=Gull Wing, G3=Gull Wing & Metal Jacket (pp47) I2=Insulator Tab (pp48) L=Third Lead(pp48) L2=Alternate Third Lead (pp48) V=Vinyl Sleeving (pp48) FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series, XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT, T=Third Overtone / AT OBSOLETE MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: ECLIPTEK Line 2: E XX.XXXM Frequency in MHz (5 Digits Maximum + Decimal) E or Blank (No Marking) Line 3: XX Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE CLASS ECLIPTEK CORP. CRYSTAL EC HC-49/U CR05 800-ECLIPTEK www.ecliptek.com for latest revision 1000 Pieces per Reel Compliant to EIA-468B REV.DATE 11/07 Specifications subject to change without notice.