WL50 Work Light This product is no longer available. It has been replaced by WL50-2. * * * * * Shown are flat-mount model with push-button (left) and 30 mm base-mount model without * * * * Designed for enclosure or area lighting Illuminates a large area with an even pattern of light and no shadows Standard or push-button models available Flat-mount or 30 mm base-mount models available Rugged, sealed polycarbonate housing rated to IP69K (standard models) or IP67 (push-button models) Low-profile design with several mounting options 12 to 30V dc operation Cabled and quick-disconnect models available Low power consumption; less than 2 watts Models Flat-mount models include a 48 mm (1.9 in) circular velcro mounting kit for easy mounting with no additional hardware. Model1 Push-Button WL50F Mounting Style Flat-mount Standard (no push-button) WL50 WL50FPB 30 mm base-mount Flat-mount Push-button WL50PB Input 12 to 30V dc 30 mm base-mount WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or deenergized sensor output condition. Specifications Supply Voltage and Current 12 to 30V dc (10% max. ripple) Use only with suitable Class 2 power supply. Max. current: 105 mA @ 12V dc; 55 mA @ 30V dc Max. Input Power: 1.7 watts Power-Up Response Time Light On: 1 ms (max.) for models without push-button Light Characteristics Color temperature (CCT): 5000 to 10000 K Color: Cool white Intensity (typical): 65 lumens; 50 lux @ 1 meter Construction Polycarbonate housing; nickel-plated QD connector or PVCjacketed cable Environmental Rating Standard models: IP69K per DIN 40050 Push-Button Models: IEC IP67 Connections Integral 4-pin Euro-style QD, 150 mm PVC pigtail with QD, or 2 m 6.5' integral cable, depending on model Operating Conditions -40 to +50 C (-40 to +122 F) Certifications Application Note Push-button models: When power is initially applied to the device, or following a power interruption and the light is off, push the push-button to turn the light on. 1 Only standard 2 m (6.5 ft) cable models are listed. For 9 m (30 ft) cable: add suffix "W/30" to the model number (e.g., WL50F W/30). For 4-Pin Euro-style Integral QD connector, add suffix "Q" to the model number (e.g., WL50FQ). For 150 mm (6 in) 4-pin Euro pigtail QD, add suffix "QP" to the model number (e.g., WL50FQP). A model with a QD requires a mating cordset (see Cordsets on page 3). P/N 147672 Rev. G 1/7/2014 0 147672 7 WL50 Work Light Dimensions -- Flat-mount * Push-button model shown. Push-button located in center of light. Dimensions -- 30 mm base-mount * Push-button model shown. Push-button located in center of light. 2 www.bannerengineering.com - tel: 763-544-3164 P/N 147672 Rev. G WL50 Work Light Wiring Female 1 Wiring Key: 1 = Brown 3 = Blue 3 1 Male 1 = Brown 3 = Blue 12 - 30V dc 3 1 3 Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) Style Dimensions Pinout 44 Typ. 1 Straight M12 x 1 o 14.5 32 Typ. [1.26"] 30 Typ. [1.18"] Right-Angle 4 2 3 1 = Brown 2 = White 3 = Blue 4 = Black M12 x 1 o 14.5 [0.57"] Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.