This product is no longer available. It has been replaced by WL50-2.
• Designed for enclosure or area lighting
• Illuminates a large area with an even pattern of light and no shadows
• Standard or push-button models available
• Flat-mount or 30 mm base-mount models available
• Rugged, sealed polycarbonate housing rated to IP69K (standard models) or
IP67 (push-button models)
• Low-profile design with several mounting options
• 12 to 30V dc operation
• Cabled and quick-disconnect models available
• Low power consumption; less than 2 watts
Shown are flat-mount model with push-button (left)
and 30 mm base-mount model without
Models
Flat-mount models include a 48 mm (1.9 in) circular velcro mounting kit for easy mounting with no additional hardware.
Model1Push-Button Mounting Style Input
WL50F
Standard (no push-button)
Flat-mount
12 to 30V dc
WL50 30 mm base-mount
WL50FPB
Push-button
Flat-mount
WL50PB 30 mm base-mount
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does NOT include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
Specifications
Supply Voltage and Current
12 to 30V dc (10% max. ripple)
Use only with suitable Class 2 power supply.
Max. current: 105 mA @ 12V dc; 55 mA @ 30V dc
Max. Input Power: 1.7 watts
Power-Up Response Time
Light On: 1 ms (max.) for models without push-button
Light Characteristics
Color temperature (CCT): 5000 to 10000 K
Color: Cool white
Intensity (typical): 65 lumens; 50 lux @ 1 meter
Construction
Polycarbonate housing; nickel-plated QD connector or PVC-
jacketed cable
Environmental Rating
Standard models: IP69K per DIN 40050
Push-Button Models: IEC IP67
Connections
Integral 4-pin Euro-style QD, 150 mm PVC pigtail with QD, or
2 m 6.5' integral cable, depending on model
Operating Conditions
-40° to +50° C (-40° to +122° F)
Certifications
Application Note
Push-button models: When power is initially applied to the
device, or following a power interruption and the light is off,
push the push-button to turn the light on.
1Only standard 2 m (6.5 ft) cable models are listed. For 9 m (30 ft) cable: add suffix “W/30” to the model number (e.g., WL50F W/30). For 4-Pin
Euro-style Integral QD connector, add suffix “Q” to the model number (e.g., WL50FQ). For 150 mm (6 in) 4-pin Euro pigtail QD, add suffix “QP”
to the model number (e.g., WL50FQP). A model with a QD requires a mating cordset (see Cordsets on page 3).
WL50 Work Light
P/N 147672 Rev. G 1/7/2014
0 147672 7
Dimensions — Flat-mount
* Push-button model shown. Push-button located in center of light.
Dimensions — 30 mm base-mount
* Push-button model shown. Push-button located in center of light.
WL50 Work Light
2 www.bannerengineering.com - tel: 763-544-3164 P/N 147672 Rev. G
Wiring
1
3
12 - 30V dc 1 = Brown
3 = Blue
1
3
1
3
Male
Female
Wiring Key:
1 = Brown
3 = Blue
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model Length Style Dimensions Pinout
MQDC-406 1.83 m (6 ft)
Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
MQDC-415 4.57 m (15 ft)
MQDC-430 9.14 m (30 ft)
MQDC-450 15.2 m (50 ft)
MQDC-406RA 1.83 m (6 ft)
Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDC-415RA 4.57 m (15 ft)
MQDC-430RA 9.14 m (30 ft)
MQDC-450RA 15.2 m (50 ft)
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned
to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,
abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (IN-
CLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND
WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL
BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPEN-
SES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY
PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WAR-
RANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or
liabilities relating to any product previously manufactured by Banner Engineering Corp.
WL50 Work Light
