MICRO SWITCHTM Hazardous Area Switches LSX Series Datasheet MICRO SWITCHTM LSX Series Hazardous Area Limit Switches MICRO SWITCHTM LSX hazardous area switches are designed for use in adverse environments. They are approved for use in hazardous locations and NEMA classified atmospheres because their rugged housings have integral flame paths. These flame paths force internal expanding gases to cool below external atmosphere ignition temperatures before they leave the housing. The LSX also features tracking interchangeability with MICRO SWITCHTM BX Series Hazardous Area switches. An optional mounting plate provides the same tracking and mounting as the standard HDLS Series (heavy-duty limit switch). The majority of HDLS operating heads and circuitry options are available for the LSX Series. The rotary actuated LSX series products are designed for use with levers that have non-sparking actuators due to the potentially hazardous environment. The other styles of LSX Series switches which are the plunger actuated and wobble actuated products incorporate an integral nonsparking actuator. What makes our switches better? Industry-leading breadth of product Weather sealed to NEMA 1, 3, 4, 6, 13 Explosion proof to NEMA 7 (Class 1, Division 1 & 2, Groups B, C, D), NEMA 9 (Class 2, Division 1 & 2, Groups E, F, G) Extensive variety of actuation heads and multiple non-sparking actuators All metal drive train that offers consistent operating characteristics through a broad temperature range. Also lasts longer (without need for frequent adjustment) than drive trains with plastic parts SAFE * RELIABLE EXPLOSION PROOF * WEATHER SEALED 2 sensing.honeywell.com Features and Benefits DESIGN FLEXIBILITY MICRO SWITCHTM LSX limit switches' field adjustability (CW-CCW operation, rotatable operating head) assists in matching the switch to the application. Available with momentary, maintained, sequential, or center neutral action. All-metal drive train for consistent operation UNIQUE DESIGN FEATURES The head design is keyed for more secure head-to-body retention with the head indexable in any one of four positions 90 apart. Captive mounting screws in the heads help prevent the loss of screws during replacement or repositioning of the head. Self-lifting pressure plate terminals save wiring time. Industry-leading breadth of products WITHSTANDS MANY CAUSTIC ENVIRONMENTS A die-cast zinc head and aluminum body make the LSX suitable for indoor and outdoor applications. A diaphragm seal between the head and body is designed to provide an extra measure of protection. Switches remain functional when exposed to many severe environments and caustic chemicals. OPTIONAL SEALS Standard seals are suitable for most applications, but optional fluorocarbon or fluorosilicone seals are available for many harsh chemical, high or low temperature environments. DESIGNED TO CONTROL LOW-VOLTAGE DC APPLICATIONS Hazardous area switches are available with a choice of silver or gold-plated contacts to handle a variety of electrical load requirements from low energy to power-duty control. sensing.honeywell.com 3 Potential Applications GRAIN ELEVATORS Monitors plugged grain conveyors, slide gate position, diverter valves, and leg positions CONTROL VALVES AND ACTUATORS Senses the "on" or "off" position of the valve ON-SHORE DRILLING Detects end of travel positions for extend and retract operations of drilling equipment PIPELINES Monitors pig position and resulting pipeline health PETROCHEMICAL AND CHEMICAL PLANTS Monitors the position of control valves, doors, and gates WATER TREATMENT PLANTS Detects control valve position PAINT BOOTHS Door interlocks for sliding or hinged gates or doors HAZARDOUS WASTE HANDLING Often used as a valve position monitor 4 sensing.honeywell.com MICRO SWITCHTM Hazardous Area Limit Switches Figure 1. MICRO SWITCHTM LSX SERIES FEATURES AND OPTIONS Sintered, bronze bearings enable longer operating life and increase resistance in corrosive environments Field adjustability of operating head matches switch to application Boss-and-socket head design for more secure head-to-body retention Dual bearings deliver enhanced mechanical life Twin shaft seals for improved environmental protection. Optional fluorosilicone seals extend operating temperature down to -40 C [-40F] Rugged zinc head and aluminum body are phosphate treated and epoxy coated Two flame paths: one in the cover-housing threads; another between the switch cavity and head 0.5 in or 0.75 in conduit options sensing.honeywell.com 5 LSX Series Figure 2. MICRO SWITCHTM LSX SERIES NOMENCLATURE LSX J 3K Switch Type Head Style Circuitry and Conduit Connection LSX Series Hazardous Area Switch - Modification Code 7A Actuator Options A Side rotary; momentary 3E 1NO/1NC, gold contacts, 1/2-14NPT 1 CW rotation 1 Fixed roller, 1.5 in radius B Top rotary; momentary 3K 1NO/1NC, 1/2-14NPT 2 CCW rotation 1A Fixed 0.75 in x 0.25 in nylon roller, 1.5 in radius C Top plunger, plain 3N SPNC direct acting, 1/2-14NPT 3 Head assembled with actuator to right side 1C Fixed 0.75 in x 0.25 in nylon roller, 1.5 in radius D Top plunger, roller 4K 1NO/1NC, 3/4-14NPT 4 Head assembled with actuator to left side 2 Adjustable, rollerless E Side plunger plain; momentary 4L 2NO/2NC, 3/4-14NPT 5 Head assembled with actuator toward mounting surface 2A Adjustable, 0.75 in x 0.25 in nylon roller F Side plunger roller; momentary 3/4-14NPT, 4M 2NO/2NC, sequential operation 6 Roller perpendicular to mounting surface 2C Adjustable, 0.75 in x 0.25 in nylon roller H Side rotary, momentary; low PT, low torque 4N 2NO/2NC, 3/4-14NPT, center neutral 8 Roller on side plunger in vertical position 2J Adjustable, 1.0 in x 0.5 in nylon roller J Wobble stick 4S 2NO/2NC, gold contacts, 3/4-14NPT 2K Adjustable, 0.5 in x 0.25 in nylon roller K Whisker 4T 2NO/2NC, gold contacts, 3/4-14NPT, sequential operation 3E Yoke, 0.75 in x 0.25 in nylon roller L Side rotary; sequential 4U 2NO/2NC, gold contacts, 3/4-14NPT, center neutral 0.75 in x 3M Yoke, 0.25 in nylon roller M Side rotary; central neutral 7L 2NO/2NC, 1/2-14NPT 3S Yoke, 0.75 in x 0.25 in nylon roller, same side N Side rotary; maintained 1/2-14NPT, 7M 2NO/2NC, sequential operation 4 Hub only P Side rotary, momentary; low PT and DT 7N 2NO/2NC, 1/2-14NPT, center neutral rod, 4M Hub aluminum R Side rotary, momentary; low torque 7S 2NO/2NC, gold contacts, 1/2-14NPT 5 Offset, rollerless U Side rotary, low pre-travel 7T 2NO/2NC, gold contacts,1/2-14NPT, sequential operation 5A Offset, 0.75 in x 0.25 in nylon roller V Top plunger, adjustable 7U 2NO/2NC, gold contacts,1/2-14NPT, center neutral 5C Offset, 0.75 in x 0.25 in nylon roller W Side plunger, adjustable 7A Plastic wobble stick Not all combinations available. Please contact Honeywell for assistance. 8A Whisker, 5.5 in To order high temperature versions, insert the additional letters Y and C in the appropriate places in the standard catalog listing, as shown below: 9A Fixed, 0.75 in x 0.25 in nylon roller, open, 1.33 in radius 9C Fixed, 0.75 in x 0.25 in nylon roller, closed, 1.33 in radius LSXA3K standard, side-rotary plug-in switch LSXYAC3K completely FC-sealed version of LSXA3K To order low temperature versions, insert the additional letters Y and B in the appropriate places in the standard catalog listing, as shown below: LSXA3K standard, side-rotary plug-in switch LSXYAB3K low-temperature version of LSXA3K For more details, please see page 8. 6 sensing.honeywell.com MICRO SWITCHTM Hazardous Area Limit Switches Table 1. Specifications Characteristic Parameter Product type Actuators MICRO SWITCHTM hazardous area limit switches side pin plunger side rotary top pin plunger - adjustable wobble - cat whisker side pin plunger - adjustable side rotary maintained top roller plunger wobble - plastic rod side roller plunger top pin plunger top rotary Circuitry 1NC 1NO SPDT snap action, double break 2NC 2NO DPDT snap action, double break 2NC 2NO DPDT snap action, double break, sequential 2NC 2NO DPDT snap action, double break, center neutral Electrical 10 A thermal single and double pole: AC15 A600, AC15 B600; DC13 R300 (see table on page 8) Housing material zinc head, aluminum body Termination types 0.5 in - 14 NPT conduit 0.75 in - 14 NPT conduit Housing type LSX non-plug-in Agency approvals and standards UL, CSA Sealing Hazardous area designations NEMA 1, 3, 4, 6, 13 NEMA 7 (Class 1, Division 1 & 2, Groups B, C, D), NEMA 9 (Class 2, Division 1 & 2, Groups E, F, G) Operating temperature* UNSPSC code UNSPSC commodity standard: -12 C to 121 C [10 F to 250 F] optional: -40 C to 121 C [-40 F to 250 F] 39122213 39122213 Limit Switch * Reference operating head styles on page 9 and 10 for exceptions. sensing.honeywell.com 7 LSX Series MICRO SWITCHTM LSX SERIES ELECTRICAL RATINGS: 10 A CONTINUOUS CARRY ac VOLTS; PILOT DUTY: AC15, A600 Electrical Circuitry Rating AC15, A600 Vac SPDT DPDT Amps at 0.35 Power Factor Make Amps at 0.35 Power Factor Break 120 60 6 240 30 3 480 15 1.5 600 12 1.2 SWITCH CONTACT STYLES, DOUBLE BREAK SPDT (1NC/1NO) DPDT (2NC/2NO) SPDT Double Break DPDT Double Break Center Neutral (SPDT each direction) Pole 1 operates CCW; Pole 2 operates CW MICRO SWITCHTM LSX SERIES ELECTRICAL RATINGS: dc VOLTS; PILOT DUTY: DC13, R300 Electrical Rating Circuitry Vdc Make & Break Amps Inductive Make & Break Amps Resistive DC13, R300 SPDT DPDT 120 0.25 0.8 240 0.15 0.4 NOTE: Same polarity each pole MICRO SWITCHTM LSX limit switches are capable of the following low voltage dc loads Circuitry Vdc Amps Inductive Amps Resistive SPDT, DPDT 24 10 10 TEMPERATURE LIMITS Standard LSX Low Limit -12 C [10 F] LSXA - Side Rotary Momentary High Limit -1 C [30 F] 93 C [200 F] * * LSXB - Top Rotary Low Temperature LSX (Fluorosilicone Sealed): Y_B Low Limit 121 C [250 F] -40 C [-40F] * * * High Temperature LSX (Fluorocarbon Sealed)*: Y_C High Limit -29 C [-20 F] 93 C [200 F] * Low Limit 121 C [250 F] -12 C [10 F] * * * High Limit -1 C [30 F] 121 C [250 F] * * * LSXC - Top Plain Plunger * * * * * * LSXD - Top Roller Plunger * * * * * * LSXE - Side Plain Plunger * * * * * * LSXF - Side Roller Plunger * * * LSXH - Side Rotary, Low Diff, Low Torque * * LSXJ - Wobble Stick * * LSXK - Cat Whisker * * LSXL - Side Rotary, Sequence * * * * * * * LSXN - Side Rotary, Maintained * * * * * LSXR - Side Rotary, Low Torque * * * * * * LSXM - Side Rotary, Center Neutral LSXP - Side Rotary, Low Diff * * * * * * * * * * * * * * * * * * * * * * LSXU - Side Rotary, 5 Low Pretravel * * LSXV - Top Adjustable Plunger * * * * * * LSXW - Side Adjustable Plunger * * * * * * * For LSX application wherein the upper temperature limit is normally above 93 C [200 F], extended switch life can be obtained by using completely fluorocarbon-sealed switches rather than standard LSX. 8 * * * * * * sensing.honeywell.com MICRO SWITCHTM Hazardous Area Limit Switches SPECIAL OPTIONS HIGH TEMPERATURE/CHEMICAL RESISTANT SWITCHES Completely fluorocarbon (FC)-sealed switches have a full FC body gasket covering the switch cavity. Rotary types have an extra FC seal on the operating shaft, while plunger versions have FC boot seals. They are designed for use in applications where the environment includes fire-resistant synthetic fluids. In addition, the FC-sealed switches may be used with such industrial fluids as Cellulube, Fyrquell, Houghto-Safe, Pydraul, and other special cutting and hydraulic fluids. The additional FC seals also promote extended operating life for rotary-actuated LSX switches in applications where the temperatures are normally -12 C to 121 C [10 F to 250 F]. To order, insert the additional letters Y and C in the appropriate places in the standard catalog listing, as shown below: LSXA3K standard, side-rotary plug-in switch LSXYAC3K completely FC-sealed version of LSXA3K LOW TEMPERATURE SWITCHES All forms of LSX limit switches are also available in low-temperature construction. Design features include fluorosilicone diaphragm, shaft seals, and external boot seal (where applicable). To order, insert the additional letters Y and B in the appropriate places in the standard catalog listing, as shown below: LSXA3K standard, side-rotary plug-in switch LSXYAB3K low-temperature version of LSXA3K MICRO SWITCHTM LSX SERIES OPERATING HEADS SIDE ROTARY: Heads may be positioned in any one of four positions, 90 increments. All are momentary action except maintained head (LSXN Series). LSXA - Standard: 60 minimum overtravel, 15 maximum pretravel, 5 (single pole) and 7 (double pole) maximum differential travel. LSXR - Low operating torque: 60 minimum overtravel, 15 maximum pretravel, 0.19 Nm [1.7 in-lb] maximum operating torque. LSXN - Maintained contact: Maintained on counterclockwise rotation and reset on clockwise rotation, and vice versa. LSXP - Low differential: 68 minimum overtravel, 9 maximum pretravel, 3 (single pole) and 4 (double pole) maximum differential travel. LSXH - Low torque, low differential travel: 68 minimum overtravel. Features low operating torque and narrow differential travel. LSXL - Sequence action: 48 minimum overtravel. Delayed action between operation of two poles. LSXM - Center neutral: 57 minimum overtravel. One pole operates on the clockwise rotation, and the other pole on the counterclockwise rotation. LSXU - Low pretravel: 5 max. pretravel, 70 min. overtravel. TOP ROTARY: Available levers provide greater versatility. Heads may be positioned in any one of four positions, 90 increments. All are momentary action. LSXB: With 100 minimum overtravel. Various levers that fit side rotary shafts may be used on the top rotary shaft. Switch is suitable for use when increased overtravel is required. sensing.honeywell.com 9 LSX Series MICRO SWITCHTM LSX SERIES OPERATING HEADS TOP PLUNGERS: Available with 4,83 mm [0.19 in] minimum overtravel. Top pin plungers are offered in pin plunger, an adjustable plunger, and a roller plunger. LSXC - Top pin plunger: A copper alloy plunger for in-line actuating motion. Oiltight seals on plunger and between the operating head and housing are designed to keep out coolant, dust, and chips. Momentary action. LSXD - Top roller plunger: A copper alloy roller plunger is adjustable to 90 angles to accept cam or slide operation from any of two directions. Boot seal on the plunger. Momentary action. LSXV - Adjustable top pin plunger: A copper alloy adjustable plunger is designed to simplify the application and decreases installation time. The operating points of the switch can be adjusted from 65,66 mm to 72,0 mm [2.585 in to 2.535 in]. Seals are the same as the pin plunger. Momentary action. WOBBLE LEVER ACTUATING HEADS: Heads come with either a Delrin(R) plastic rod or a copper alloy cat whisker. Any movement of the lever (except pull) will actuate the switch. LSXJ - Plastic rod: Recommended where possible scratching or marring by the actuator is to be avoided. 10 sensing.honeywell.com LSXK - Cat whisker: Copper alloy actuator designed for low operating force applications. SIDE PLUNGERS: Made of non-sparking copper alloy. Available with 4,83 mm [0.19 in] minimum overtravel. Side plungers are offered in plain plunger, an adjustable pin plunger, and a roller plunger. LSXE - Side pin plunger: A copper alloy plunger for actuating motion inline with the plunger travel. Actuating head may be rotated in any of four positions, 90 apart. A boot seal on the plunger and a gasket seal between the head and housing is designed to keep out coolant, dust, and chips. Momentary action. LSXF - Side roller plunger: A copper alloy roller plunger fits close quarters under cams and slides. The head may be rotated in any of four positions, 90 apart. The roller can be turned vertical or horizontal to the switch. Boot seal on plunger. Momentary action. LSXW - Adjustable side pin plunger: Has the same features of the side plain plunger plus the means to adjust the operating points of the switch from 41 mm to 47,4 mm [1.615 in to 1.865 in]. Momentary action. MICRO SWITCHTM Hazardous Area Limit Switches SIDE ROTARY * MICRO SWITCHTM LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS Standard (LSXA) Low Differential (LSXP) Low Torque (LSXR) Standard Low differential travel Low operating torque 4 2 7 5 8 6 10 15 0 0 3 1 3 1 4 2 7 5 8 6 4 2 6 9 0 8 15 5 9 SPDT 0 DPDT Snap Action 1NO/1NC Snap Action 2NO/2NC 3 1 4 2 3 1 4 2 7 5 8 6 10 15 0 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 4 2 3 1 DPDT Snap Action 2NO/2NC 1-2 3-4 3-4 1-2 3 1 SPDT Snap Action 1NO/1NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Snap Action 2NO/2NC 1-2 3-4 3-4 1-2 DPDT 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 0 SPDT Snap Action 1NO/1NC 1-2 3-4 3-4 1-2 Description 8 15 75 75 Contact closed n Contact open o 75 75 75 75 Pretravel Differential travel Overtravel Operating torque 15 max. 5 max. 7 max. SPDT DPDT SPDT Double Break 7 max. 66 min. 60 min. 0,45 Nm [4 in-lb] max. 0,19 Nm [1.7 in-lb] max. Momentary, CW, & CCW (Spring return) -12 C to 121 C [10 F to 250 F] -1 C to 121 C [30 F to 250 F] Conduit (NPT) Silver 0.5 in LSXA3K LSXP3K LSXR3K Silver 0.75 in LSXA4K LSXP4K LSXR4K Gold1 0.5 in LSXA3E LSXP3E LSXR3E Silver 0.5 in LSXA7L LSXP7L LSXR7L 0.75 in LSXA4L LSXP4L LSXR4L 0.75 in LSXA4S LSXP4S LSXR4S Silver DPDT Double Break 5 max. Contacts 4 max. 60 min. Operating temperature range2 3 max. 15 max. 0,45 Nm [4 in-lb] max. Action 9 max. Gold1 Gold-plated contacts Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] For low temperature or high temperature versions, see page 9. 1 2 sensing.honeywell.com 11 LSX Series SIDE ROTARY * MICRO SWITCHTM LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS Maintained Contact (LSXN) Low Torque (LSXH) Maintained,Maintained 2-position Std. Momentary, low torque Contact Snap Action 2NO/2NC 6 3 4 1 2 3 1 3 1 4 2 7 8 5 6 7 5 8 6 8 0 3 1 4 2 1-2 3-4 3-4 1-2 25 0 25 0 0 4 2 1-2 3-4 3-4 1-2 7 5 DPDT 6 9 0 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Snap Action 1NO/1NC 2 Maintained Contact 1-2 3-4 3-4 1-2 0 4 2 SPDT Maintained Contact 4 1 Maintained Contact 3 1 DPDT 3 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 SPDT 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Description 5 9 65 65 85 Contact closed n Contact open o SPDT DPDT 75 Differential travel 40 max. 20 min. 66 min. 0,45 Nm [4 in-lb] max. 0,19 Nm [1.7 in-lb] max. Maintained Momentary, CW, & CCW (Spring return) 3 max. 4 max. -1 C to 121 C [30 F to 250 F] (for low temp or high temp versions, see page 9) Silver 0.5 in LSXN3K LSXH3K Silver 0.75 in LSXN4K LSXH4K Gold1 0.5 in LSXN3E LSXH3E Silver 0.5 in LSXN7L LSXH7L 0.75 in LSXN4L LSXH4L 0.75 in LSXN4S LSXH4S Silver Gold1 Gold-plated contacts Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] For low temperature or high temperature versions, see page 9. 2 sensing.honeywell.com 9 max. Conduit (NPT) 1 12 85 75 Contacts DPDT Double Break 65 85 Overtravel Operating temp. range2 SPDT Double Break 65 65 max. Action 85 Pretravel Operating torque 25 25 MICRO SWITCHTM Hazardous Area Limit Switches SIDE ROTARY * MICRO SWITCHTM LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS Sequential (Pole 1 operates before Pole 2, either CW, CCW, or both) DPDT DPDT CCW 75 0 7-8 5-6 3-4 1-2 Sequence Action (LSXL) Center Neutral (Pole 1 operates CCW; Pole 2 operates CW) 1-2 3-4 5-6 7-8 Description Center Neutral (LSXM) 10 15 18 8 20 25 0 0 8 CW 75 75 5-6 7-8 3-4 1-2 Contact closed n Contact open o 1-2 3-4 7-8 5-6 18 18 max. 1st: 15; 2nd: additional 10 Differential travel 10 max. each pole: 5 Overtravel 57 min. 48 min. 0,45 Nm [4 in-lb] max. 0,45 Nm [4 in-lb] max. CW & CCW (Spring return) Action DPDT Operating temp. range2 -12 C to 121 C [10 F to 250 F] Conduit (NPT) Silver 0.5 in LSXM7N LSXL7M 0.75 in LSXM4N LSXL4M Gold1 0.5 in LSXM7U LSXL7T Gold1 0.75 in LSXM4U LSXL4T Silver -1 C to 121 C [30 F to 250 F] Contacts DPDT Double Break Pretravel Operating torque Gold-plated contacts Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] For low temperature or high temperature versions, see page 9. 1 2 sensing.honeywell.com 13 LSX Series TOP ROTARY * MICRO SWITCHTM LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS Standard (LSXB) Standard SPDT DPDT Snap Action 1NO/1NC Snap Action 2NO/2NC 3 1 4 2 3 1 4 2 1-2 3-4 3-4 1-2 Description 7 5 8 6 15 25 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 0 0 13 25 Contact closed n Contact open o 135 135 25 max. Pretravel Differential travel 10 max. 0,25 Nm [2.5 in-lb] Operating torque Momentary, CW, & CCW (Spring return) Action SPDT SPDT Double Break -1 C to 121 C [30 F to 250 F] (for low temp or high temp versions, see page 9) Contacts Conduit (NPT) Silver 0.5 in LSXB3K - Silver 0.75 in - LSXB4L Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] For low temperature or high temperature versions, see page 9. 1 14 12 max. 110 min. Overtravel Operating temp. range1 sensing.honeywell.com MICRO SWITCHTM Hazardous Area Limit Switches Table 2. Common levers for use with MICRO SWITCHTM LSX Rotary Switches* Levers for use with side-rotary-actuated switches are available in a wide choice of sizes and materials. The most common listings are shown below. Rollers may be on either side of the lever to best match the external actuating mechanism. Fixed lever, nylon roller LSZ51A - front mount roller LSZ51C - back mount roller Short fixed lever, nylon roller LSZ59A - front mount roller LSZ59C - back mount roller One-way lever, nylon roller LSZ60A - front mount roller Yoke lever, nylon rollers LSZ53A - front/back mount rollers Adjustable lever, nylon roller LSZ52A - back mount roller LSZ52C - front mount roller LSZ52J adjustable lever, nylon roller 25,4 mm [1 in] LSZ52K adjustable lever, nylon roller 38,1 [1.5 in] LSZ54M aluminum rod 140 mm [5.5 in] LSZ61 loop 152 mm [6 in] Offset lever, nylon roller LSZ55A - back mount roller LSZ55C - front mount roller LSZ67CA** Plastic conveyor roller LSZ68 rod with spring 305 mm [12 in] * Non-sparking rollers and actuators must be used in hazardous areas. ** May require orientation of switch and lever to enable gravity to help restore switch's free position. sensing.honeywell.com 15 LSX Series Table 3. LSX Series Lever Order Guide Roller Roller Roller Dia. mm Width mm Mounting [in] [in] Fixed 38,1 mm [1.5 in] radius LSZ51 Rollerless n/a n/a n/a LSZ51A Nylon 19 [0.75] 6,35 [0.25] Front LSZ51C Nylon 19 [0.75] 6,35 [0.25] Back LSZ51F Nylon 25,4 [1.0] 12,7 [0.50] Front LSZ51G Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ51J Nylon 25,4 [1.0] 12,7 [0.50] Back LSZ51M Nylon 19 [0.75] 31,7 [1.25] Back LSZ51P Nylon 19 [0.75] 12,7 [0.50] Front LS2Z51A (sst) Nylon 19 [0.75] 6,35 [0.25] Front LS2Z51C (sst) Nylon 19 [0.75] 6,35 [0.25] Back LS2Z51E (sst) Copper alloy 19 [0.75] 6,35 [0.25] Front LS2Z51F (sst) Copper alloy 19 [0.75] 6,35 [0.25] Back Adjustable 38,1 mm [1.5 in] to 88,9 mm [3.5 in] radius LSZ52 Rollerless n/a n/a n/a Catalog Listing Flexible loop LSZ61 O 4,8 [O 0.19 ] 152 mm [6 in] flexible loop Nylatron LSZ618 O 4,8 [O 0.19 ] 241 mm [9.5 in] flexible loop Nylatron LSZ54 Hub only n/a n/a n/a Catalog Listing Material LSZ52A Nylon 19 [0.75] 6,35 [0.25] Back LSZ52C Nylon 19 [0.75] 6,35 [0.25] Front 33,0 [1.30] Front LSZ52E Nylon 19 [0.75] LSZ52J Nylon 25,4 [1.0] 12,7 [0.50] Front LSZ52K Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ52M Nylon 50,8 [2.0] 6,35 [0.25] Front LSZ52N Nylon 19 [0.75] 12,7 [0.50] Front 6,35 [0.25] Front LS2Z52A (sst) Nylon 19 [0.75] LS2Z52C (sst) Nylon 19 [0.75] 6,35 [0.25] Back LS2Z52E (sst) Copper alloy 19 [0.75] 6,35 [0.25] Front LS2Z52F (sst) Copper alloy 19 [0.75] 6,35 [0.25] Back Yoke - 38,1 mm [1.5 in] radius LSZ53A Nylon 19 [0.75] LSZ53E Nylon 19 [0.75] LSZ53M Nylon 19 [0.75] 6,35 [0.25] Front/Back 6,35 [0.25] Back/Front 31,7 [1.25] Back/Front LSZ53S Nylon 19 [0.75] 6,35 [0.25] Back/Back Rod LSZ54 Hub only n/a n/a n/a LSZ54M Alum, 140 mm [5.5 in] O 3,2 [O 0.125] n/a n/a LSZ54N Stainless, 330 mm [13 in] O 3,2 [O 0.125] n/a n/a LSZ54P LSZ54W Roller Roller Dia. mm Width mm [in] [in] Short fixed - 33,02 mm [1.3 in] radius LSZ59A Nylon 19 [0.75] 6,35 [0.25] LSZ59C Nylon 19 [0.75] 6,35 [0.25] One-way roller lever LSZ60A Nylon Spring rod LSZ68 LSZ617 LSZ686 Delrin rod, 305 mm [12 in] Delrin rod, 406 mm [16 in] Delrin rod, 152 mm [6 in] n/a Plastic rod, 183 mm [7.2 in] n/a n/a n/a 16 sensing.honeywell.com n/a Back Front Front Front 6,35 [0.25] Front n/a n/a n/a n/a n/a n/a 50 [2.0] 12,7 [0.5] front Rubber 50 [2.0] 12,7 [0.5] front LSZ52Y Rubber 50 [2.0] 12,7 [0.5] front 38,1 [1.5] 96,5 [3.8] n/a 38,1 [1.5] radius (offset) 38,1 to 89 [1.5 to 3.5] radius n/a 6,35 [0.25] 6,35 [0.25] 12,7 [0.50] 6,35 [0.25] O 6,35 [0.25] O 6,35 [0.25] O 6,35 [0.25] Front Back (standard) LSZ55Y (adjustable) Plastic roller levers LSZ67AA Plastic (conveyor)* Offset - 38,1 mm [1.5 in] radius LSZ55 Rollerless n/a LSZ55A Nylon 19 [0.75] LSZ55C Nylon 19 [0.75] LSZ55E Nylon 19 [0.75] LSZ55K Nylon 38,1 [1.5] 19 [0.75] Roller Mounting Rubber roller levers Rubber LSZ51Y 38,1 [1.5] radius Plastic rod, O6,85 305 mm [12 in] [O 0.27] O6,85 [O 0.27] Material * May require orientation of switch and lever to enable gravity to help restore switch to free position. MICRO SWITCHTM Hazardous Area Limit Switches TOP PLUNGER * MICRO SWITCHTM LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS All top plungers are momentary action. Plain (LSXC) Roller (LSXD) Adjustable (LSXV) Top plain plunger for in-line operating motion Top roller plunger - can be set at 90 increments to accept cam or slide actuation Adjustable top plain plunger simplifies installation since operating point can be adjusted from 65,66 mm min.; 72,0 mm max. [2.585 in min; 2.835 in max.] DPDT Snap Action 2NO/2NC Snap Action 1NO/1NC Snap Action 2NO/2NC 3 1 4 2 3 1 4 2 3 1 3 1 4 2 3 1 3 1 4 2 7 5 8 6 7 5 8 6 7 5 8 6 1,4 mm [0.055 in] 1,78 mm [0.07 in] 0 in 1,78 mm [0.07 in] 6,6 mm [0.26 in] SPDT DPDT SPDT Double Break 1-2 3-4 3-4 1-2 0 in 6,6 mm [0.26 in] 0,38 mm [0.015 in] 0,51 mm [0.02 in] 0,38 mm [0.015 in] 0,51 mm [0.02 in] 4,83 mm [0.19 in] 17,8 N [4 lb] max. 58,55 mm 0,76 mm [2.305 in 0.030 in] 68,58 mm 1,02 mm [2.70 in 0.040 in] 0,38 mm [0.015 in] 0,51 mm [0.02 in] 65,66 mm min.; 72,0 mm max. [2.585 in min; 2.835 in max.] -12 C to 93 C [10 F to 200 F] (for low temp or high temp versions, see page 9) Silver 0.5 in LSXC3K LSXD3K LSXV3K Silver 0.75 in LSXC4K LSXD4K LSXV4K Gold1 0.5 in LSXC3E LSXD3E LSXV3E Silver 0.5 in LSXC7L LSXD7L LSXV7L 0.75 in LSXC4L LSXD4L LSXV4L 0.75 in LSXC4S LSXD4S LSXV4S Silver Gold1 1,78 mm [0.07 in] 1,27 mm [0.050 in] 1,4 mm [0.07 in] Conduit (NPT) DPDT Double Break 1,4 mm [0.055 in] 1,78 mm [0.07 in] Contacts 4 2 Operting force Operating temp. range2 6,6 mm [0.26 in] Overtravel Operating point 1,27 mm [0.050 in] 0 in 6,6 mm [0.26 in] Pretravel Differential travel 0 in 1,4 mm [0.07 in] 6,6 mm [0.26 in] Contact closed n Contact open o 1,4 mm [0.055 in] 1,27 mm [0.050 in] 1,4 mm [0.07 in] 6,6 mm [0.26 in] 0 in 4 2 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 SPDT Snap Action 1NO/1NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 DPDT Snap Action 2NO/2NC 0 in DPDT 1-2 3-4 3-4 1-2 SPDT 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 SPDT Snap Action 1NO/1NC 1-2 3-4 3-4 1-2 Description Gold-plated contacts Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] For low temperature or high temperature versions, see page 9. 1 2 sensing.honeywell.com 17 LSX Series SIDE PLUNGER * MICRO SWITCHTM LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS All side plungers are momentary action. Heads may be positioned to accept actuation from any of four directions, 90 apart. Plain (LSXE) Roller (LSXF) Adjustable (LSXW) Side plain plunger for inline operating motion Side roller plunger - can be set at 90 increments to accept cam or slide actuation Adjustable side plain plunger simplifies installation since operating point can be adjusted from 41 mm min.; 47,37 mm max. [1.615 in min.; 1.865 in max.] SPDT DPDT SPDT DPDT Snap Action 1NO/1NC 0 in 4 2 3 1 4 2 7 5 8 6 1-2 3-4 3-4 1-2 3 1 0 in 1,4 mm [0.055 in] 2,54 mm [0.10 in] SPDT DPDT Snap Action 2NO/2NC 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Description 1,4 mm [0.055 in] 2,54 mm [0.10 in] Contact closed n Contact open o 7,36 mm [0.29 in] SPDT DPDT SPDT Double Break 2,54 mm [0.10 in] 1,14 mm [0.045 in] Overtravel 4,83 mm [0.19 in] Operting force 26,7 N [6 lb] max. 41 mm min.; 47,37 mm max. [1.615 in min.; 1.865 in max.] -12 C to 93 C [10 F to 200 F] (for low temp or high temp versions, see page 9) Conduit (NPT) Silver 0.5 in LSXE3K LSXF3K LSXW3K Silver 0.75 in LSXE4K LSXF4K LSXW4K Gold1 0.5 in LSXE3E LSXF3E LSXW3E Silver 0.5 in LSXE7L LSXF7L LSXW7L 0.75 in LSXE4L LSXF4L LSXW4L 0.75 in LSXE4S LSXF4S LSXW4S Silver Gold1 Gold-plated contacts Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] For low temperature or high temperature versions, see page 9. 1 2 18 44,07 mm 1,02 mm [1.735 in 0.04 in] Contacts DPDT Double Break 33,02 mm 0,76 mm [1.300 in 0.030 in] Differential travel Operating temp. range2 7,36 mm [0.29 in] Pretravel Operating point sensing.honeywell.com MICRO SWITCHTM Hazardous Area Limit Switches WOBBLE * MICRO SWITCHTM LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS LSXK Series 8A Actuator Delrin(R) plastic rod lever (wobble stick) Cat whisker actuator for low operating force applications SPDT DPDT SPDT DPDT -8A Snap Action 2NO/2NC 3 4 2 7 8 5 3 4 1 2 6 7 8 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 1 0 Snap Action 2NO/2NC 5 6 8 12 0 1-2/5-6 3-4/7-8 3-4/7-8 1-2/5-6 Description LSXJ Series 7A Actuator 15 25 LSJ1A-7A - Plastic rod LSK1A8A - Cat whisker Contact closed n Contact open o SPDT DPDT SPDT Double Break 152,4 mm [6 in] 139,7 mm [5.5 in] copper alloy 25,4 mm [1.0 in] 51,0 mm [2.0 in] 2,78 Nm [10 oz] 1,39 Nm [5 oz] Silver 0.5 in LSXJ3K-7A LSXK3K-8A Silver 0.75 in LSXJ4K-7A LSXK4K-8A Gold1 0.5 in LSXJ3E-7A LSXK3E-8A Silver 0.5 in LSXJ7L-7A LSXK7L-8A 0.75 in LSXJ4L-7A LSXK4L-8A 0.75 in LSXJ4S-7A LSXK4S-8A Silver -12 C to 93 C [10 F to 200 F] (for low temp or high temp versions, see page 9) Conduit (NPT) DPDT Double Break Contacts 75 Pretravel Operating temp. range2 Actuator length Operating force 75 Gold1 Gold-plated contacts Completely fluorocarbon sealed switches are preferred for use in temperatures above 93 C [200 F] For low temperature or high temperature versions, see page 9. 1 2 sensing.honeywell.com 19 LSX Series REPLACEMENT CONTACT BLOCKS Circuitry Replacement Contact Block Single pole LSXZ3K Double pole LSXZ3L Sequence or central neutral LSXZ3M ASSEMBLY MODIFICATIONS Momentary action rotary switches can be furnished in other than the normal assembled conditions. To specify modifications, add the numbers shown below to the catalog listings. Modification number suffixes are: 1 Clockwise actuation only 2 Counterclockwise actuation only 3 Shaft to right of switch front 4 Shaft to left of switch front 5 Shaft to back of switch REPLACEMENT HEADS FOR STANDARD LSX SWITCHES Switch Type Catalog Listing/Operating Head Only LSXA LSXZ1A LSXB LSXZ1B LSXC LSXZ1C LSXD LSXZ1D LSXE LSXZ1E LSXF LSXZ1F PLUNGER ASSEMBLY MODIFICATIONS LSXH LSXZ1H LSXJ LSXZ1JGA LSXK LSXZ1KHA LSXL LSXZ1L LSXM LSXZ1M LSXN LSXZ1N LSXP LSXZ1P Add the following modification numbers to the catalog listing in the plunger switch: 3 Side plunger to right of switch front 4 Side plunger to left of switch front 5 Side plunger to back of switch 6 Roller on top plungers perpendicular to mounting surface 8 Roller on side plungers in vertical position LSXR LSXZ1R LSXU LSXZ1U LSXV LSXZ1V LSXW LSXZ1W For example, Catalog listing LSXA3K23 is a LSXA3K switch adjusted for counterclockwise actuation only. The operating shaft is to the right side of the switch when viewing it from the front (label side). No lever. For example, Catalog listing LSXF3K3 is a LSXF3K switch with the side roller plunger to the right side. ADAPTER PLATE Catalog listing LSXZ4022 adapter plate enables the NEMA-rated, explosion-proof LSX Series to be mounted on existing HDLS mounting holes. The LSX has a recessed back into which the adapter plate fits and mounts, using two screws (furnished) 29,4 mm [1.156 in] 1/2 in or 3/4 in conduit openings 59,5 mm [2.344 in] 20 sensing.honeywell.com MICRO SWITCHTM Hazardous Area Limit Switches Figure 3. MICRO SWITCHTM LSX SERIES PRODUCT REFERENCE DIMENSIONS * mm [in] SIDE ROTARY - HEAD CODES: A, H, L, M, N, P, Q, R, AND U 50,8 [2.00] 39,6 [1.56] 62,7 [2.47] 19,05 [.75] 25,4 [1.00] 49,3 [1.94] 7,32 [.29] 31,8 [1.25] 46,5 [1.83] 97,0 [3.82] 116,8 [4.60] 76,2 DIA [3.00] 85,6 [3.38] 2X 5.0 [0.20] DIA MOUNTING HOLES 25,4 [1.00] 2X 5/16-18 UNC 28 TAPPED FROM REAR ONLY 0.875 THREAD DEPTH 38,1 [1.50] 41,4 [1.63] 74,4 [2.93] CONDUIT OPENING Figure 4. MICRO SWITCHTM LSX SERIES WOBBLE STICK, HEAD CODE J * mm [in] 19.05 [0.75] O6,35 [O0.25] Figure 5. MICRO SWITCHTM LSX SERIES CAT WHISKER WOBBLE, HEAD CODE K * mm [in] 0,84 [21.3] 11,94 [0.047] 12,3 [0.845] 152,4 [6.00] 152,4 [6.0] 76,2 [3.00] 77,7 [3.06] K HEAD J HEAD sensing.honeywell.com 21 LSX Series Figure 6. MICRO SWITCHTM LSX SERIES TOP ROTARY, HEAD CODE B * mm [in] Figure 7. MICRO SWITCHTM LSX SERIES TOP PIN PLUNGER, HEAD CODE C * mm [in] 19,05 [0.75] 21,6 [.85] 19,05 [.75] 9,5 [0.373] 21,6 [0.85] 7,32 [0.29] OPERATING POINT 59,7 [2.35] 69,9 [2.75] 55,1 [2.17] MTG PADS MTG PADS HEAD Figure 9. MICRO SWITCHTM LSX CSERIES SIDE PLUNGER, HEAD CODE E * mm [in] Figure 8. MICRO SWITCHTM LSX SERIES TOP ROLLER PLUNGER, HEAD CODE D * mm [in] 19,05 [0.75] B HEAD 19,05 [.75] 33.0 [1.30] OPERATING POINT 21,5 [8.45] 21,5 [0.845] 4,7 [0.185] O12,7 [O 0.50] 31.75 [1.25] 9.47 [0.373] OPERATING POINT 68.6 [2.700] MTG PADS Figure 11. MICRO SWITCHTM LSX SERIES SIDE ROLLER E HEAD PLUNGER, HEAD CODE F * mm [in] MTG PADS Figure 10. MICRO SWITCHTM LSX SERIES ADJUSTABLE TOP PIN PLUNGER, HEAD CODE V * mm [in] 19,05 [0.75] 44.1 [1.735] OPERATING POINT 21,6 [0.85] 3,81 [0.15] D HEAD 21,6 [.85] 19,05 [.75] 31,75 [1.25] 7,92 [3.12] ACROSS FLATS 72,0 - 65,7 [2.835 MAX - 2.585 MIN] OPERATING POINT O12,7 [O0.50] F HEAD Figure 12. MICRO SWITCHTM LSX SERIES ADJUSTABLE SIDE PIN PLUNGER, HEAD CODE W * mm [in] 19,05 [.75] V HEAD 41,0 MIN - 47,4 MAX [1.615 MIN - 1.865 MAX] OPERATING POINT 0,85 [21.6] 31,8 [1.25] 7,92 [3.12] ACROSS FLATS W HEAD 22 sensing.honeywell.com MICRO SWITCHTM Hazardous Area Limit Switches This datasheet supports the following MICRO SWITCHTM LSX Series Hazardous Area Limit Switches LSXA3E LSXA3E-1A LSXA3E-2K LSXA3E1 LSXA3E24-1A LSXA3K LSXA3K-1A LSXA3K-1C LSXA3K-2C LSXA3K-2J LSXA3K-2K LSXA3K-4M LSXA3K-5C LSXA3K1 LSXA3K1-1C LSXA3K1-2C LSXA3K4-4M LSXA3K5 LSXA3K5-1A LSXA3K5-4M LSXA3K5-5C LSXA3N LSXA4K LSXA4K-1A LSXA4K-2C LSXA4K-2J LSXA4L LSXA4L-1A LSXA4L-1C LSXA4L-2C LSXA4L-2K LSXA4L-4M LSXA4L-5C LSXA4L13-2J LSXA4L2-1C LSXA4L3-2C LSXA4L4-1A LSXA4L4-2C LSXA4L5 LSXA4L5-1A LSXA4S LSXA4S-2K LSXA4S13-2C LSXA4S5 LSXA7L LSXA7L-1A LSXA7S LSXA7S-2 LSXA7S1-1C LSXA7S2-1C LSXB3K LSXB3K-4M LSXB4L LSXB4L-1C LSXB4L-4M LSXC3E LSXC3K LSXC4K LSXC4L LSXC4S LSXC7L LSXD3E LSXD3K LSXD3K6 LSXD4K LSXD4L LSXD4L6 LSXD7L LSXE3K LSXE3K3 LSXE3K4 LSXE4K LSXE4L LSXF3E LSXF3K LSXF3K5 LSXF3K8 LSXF4L LSXF4L5 LSXF7L LSXF7L5 LSXH3K LSXH3K-2C LSXH3K-4M LSXH3K3-2C LSXH4K LSXH4L LSXH4L-4 LSXH4L3 LSXH7L4-1A LSXJ3E-7A LSXJ3K-7A LSXJ4L-7A LSXJ4S-7A LSXJ7L-7A LSXK3K-8A LSXK4L-8A LSXL4M LSXL4M4 LSXL7M-2C LSXM4N LSXM4N-1A LSXM4N-1C LSXM4N-2C LSXM4N-2J LSXM4N-3S LSXM4N-4M LSXM4N-5C LSXM4N3-1A LSXM4N4 LSXM4N4-1A LSXM4N5 LSXM4N5-1A LSXM4U LSXM7N LSXM7N-1A LSXM7U LSXN3K LSXN3K-1A LSXN3K-4M LSXN4K LSXN4L LSXN4L-1A LSXN4L-2C LSXN4L-3S LSXN4L4 LSXN4S-3S LSXN7L LSXN7L-2A LSXP3E LSXP3K LSXP3K-1A LSXP3K-1C LSXP3K-5C LSXP3K1 LSXP3K3 LSXP3K3-1A LSXP3K5-1A LSXP4K LSXP4K-2C LSXP4L LSXP4L-2C LSXP4L3-2C LSXP7L LSXP7L14-2C LSXP7L3 LSXQA3K332 LSXQC4C LSXR3K LSXR3K-1A LSXR3K-1C LSXR3K-5A LSXR4K-2C LSXR4L LSXR4L-1C LSXR4L-2J LSXR4L-5A LSXR4L-5C LSXR4L1 LSXR4L24 LSXU3K LSXV3K LSXV4L LSXV4S LSXV7L LSXW3K LSXW3K3 LSXW4L LSXW7L LSXYAB3E LSXYAB3K LSXYAB3K-1A LSXYAB3K2 LSXYAB3K2-5C LSXYAB3K5-2C LSXYAB4K LSXYAB4K-1A LSXYAB4L LSXYAB4L-1A LSXYAB4L4 LSXYAB4L5-1A LSXYAB7L LSXYAC3K LSXYAC3K-2C LSXYAC4L LSXYBB3K LSXYBB4L LSXYCB3K LSXYCB4L LSXYCC3K LSXYCC4L LSXYDB3K LSXYDB4L LSXYDC7L LSXYEB3K LSXYEC3K LSXYFB3K LSXYHB3K-2C LSXYJB3K-7A LSXYLB4M LSXYMB4N LSXYMB4N-1A LSXYMB4N-2C LSXYMB4N5-1A LSXYMC4N LSXYNB3K LSXYNB3N-1A LSXYNB4L LSXYPB3K LSXYPB4L LSXYPB4S LSXYPC4L5 LSXYRB3K LSXYVC3K LSXYWC3K LSXYWC4L5 LSXZ1C LSXZ1CB LSXZ1CC LSXZ1D LSXZ1DB LSXZ1DC LSXZ1E LSXZ1EB LSXZ1EC LSXZ1F LSXZ1FB LSXZ1FC LSXZ1KHA LSXZ1V LSXZ1VB LSXZ1VC LSXZ1W LSXZ1WB LSXZ1WC LSXZ23E LSXZ23EB LSXZ23K LSXZ23KB LSXZ23N LSXZ23NB LSXZ24K LSXZ24KB LSXZ24L LSXZ24LB LSXZ24M LSXZ24MB LSXZ24N LSXZ24NB LSXZ24S LSXZ24SB LSXZ24SC LSXZ24T LSXZ24TB LSXZ24TC LSXZ24U LSXZ24UB LSXZ24UC LSXZ27L LSXZ27LB LSXZ27N LSXZ27NB LSXZ27S LSXZ27SB LSXZ27SC LSXZ27T LSXZ27TB LSXZ27TC LSXZ27U LSXZ27UB LSXZ27UC LSXZ3E LSXZ3K LSXZ3L LSXZ3M LSXZ3S LSXZ4012 LSXZ4022 sensing.honeywell.com 23 LSX Series ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product installation instructions * Product range guide * Hazardous area product brochure * Product application-specific information WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. - Application note: Electronic sensors and electromechanical switches in valves and flow meters - Application note: MICRO SWITCHTM switches in conveyor applications - Application note: Sensors and switches for industrial manual process valves - Application note: Sensors and switches used in valve actuators and valve positioners - Limit and enclosed switches reference standards - Sensors and switches in oil rig applications WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 24 sensing.honeywell.com Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 002385-2-EN IL50 GLO August 2014 Copyright (c) 2014 Honeywell International Inc. All rights reserved.