MICRO SWITCH™
Hazardous Area Switches
LSX Series
Datasheet
2sensing.honeywell.com
What makes our switches better?
Industry-leading breadth of product
Weather sealed to NEMA 1, 3, 4, 6, 13
Explosion proof to NEMA 7 (Class 1, Division 1 & 2, Groups B, C, D),
NEMA 9 (Class 2, Division 1 & 2, Groups E, F, G)
Extensive variety of actuation heads and multiple non-sparking
actuators
All metal drive train that offers consistent operating characteristics
through a broad temperature range. Also lasts longer (without need
for frequent adjustment) than drive trains with plastic parts
MICRO SWITCH™ LSX Series
Hazardous Area Limit Switches
MICRO SWITCH™ LSX hazardous area switches are designed for use in adverse environments. They are approved for use in
hazardous locations and NEMA classied atmospheres because their rugged housings have integral ame paths. These ame
paths force internal expanding gases to cool below external atmosphere ignition temperatures before they leave the housing. The
LSX also features tracking interchangeability with MICRO SWITCH™ BX Series Hazardous Area switches. An optional mounting
plate provides the same tracking and mounting as the standard HDLS Series (heavy-duty limit switch).
The majority of HDLS operating heads and circuitry options are available for the LSX Series. The rotary actuated LSX series
products are designed for use with levers that have non-sparking actuators due to the potentially hazardous environment. The
other styles of LSX Series switches which are the plunger actuated and wobble actuated products incorporate an integral non-
sparking actuator.
SAFE • RELIABLE
EXPLOSION PROOF • WEATHER SEALED
3
sensing.honeywell.com
Features
and Benefits
Features
and Benefits
DESIGN FLEXIBILITY
MICRO SWITCH™ LSX limit switches’ field adjustability (CW-CCW operation,
rotatable operating head) assists in matching the switch to the application.
Available with momentary, maintained, sequential, or center neutral action.
UNIQUE DESIGN FEATURES
The head design is keyed for more secure head-to-body retention with the
head indexable in any one of four positions 90° apart. Captive mounting screws in
the heads help prevent the loss of screws during replacement or repositioning of
the head. Self-lifting pressure plate terminals save wiring time.
WITHSTANDS MANY CAUSTIC ENVIRONMENTS
A die-cast zinc head and aluminum body make the LSX suitable for indoor and
outdoor applications. A diaphragm seal between the head and body is designed
to provide an extra measure of protection. Switches remain functional when
exposed to many severe environments and caustic chemicals.
OPTIONAL SEALS
Standard seals are suitable for most applications, but optional fluorocarbon
or fluorosilicone seals are available for many harsh chemical, high or low
temperature environments.
DESIGNED TO CONTROL LOW-VOLTAGE DC APPLICATIONS
Hazardous area switches are available with a choice of silver or gold-plated
contacts to handle a variety of electrical load requirements from low energy to
power-duty control.
Industry-leading breadth of products
All-metal drive train for consistent operation
4sensing.honeywell.com
GRAIN ELEVATORS
Monitors plugged grain conveyors, slide gate position, diverter valves, and leg
positions
CONTROL VALVES AND ACTUATORS
Senses the “on” or “off” position of the valve
ON-SHORE DRILLING
Detects end of travel positions for extend and retract operations of drilling
equipment
PIPELINES
Monitors pig position and resulting pipeline health
PETROCHEMICAL AND CHEMICAL PLANTS
Monitors the position of control valves, doors, and gates
WATER TREATMENT PLANTS
Detects control valve position
PAINT BOOTHS
Door interlocks for sliding or hinged gates or doors
HAZARDOUS WASTE HANDLING
Often used as a valve position monitor
Potential Applications
5
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
Figure 1. MICRO SWITCH™ LSX SERIES FEATURES AND OPTIONS
0.5 in or 0.75 in
conduit options
Sintered, bronze bearings
enable longer operating life
and increase resistance in
corrosive environments
Dual bearings deliver
enhanced mechanical life Twin shaft seals for improved
environmental protection.
Optional fluorosilicone seals
extend operating temperature
down to -40 °C [-40°F]
Two flame paths:
one in the cover-housing
threads; another between
the switch cavity and head
Boss-and-socket
head design for more secure
head-to-body retention
Field adjustability
of operating head matches
switch to application
Rugged zinc head
and aluminum body
are phosphate treated
and epoxy coated
6sensing.honeywell.com
LSX Series
LSX
Switch Type
LSX
Series
Hazar
dous
Area
Switch
Head Style
J
LSide rotary;
sequential
MSide rotary;
central neutral
7A
Actuator
Options
3K
Circuitry and
Conduit Connection
Modification
Code
N
P
Side rotary;
maintained
Side rotary, momentary;
low PT and DT
R
V
Side rotary, momentary;
low torque
Top plunger,
adjustable
WSide plunger,
adjustable
3E
3K
3N
4K
1NO/1NC, gold
contacts, 1/2-14NPT
1NO/1NC, 1/2-14NPT
SPNC direct acting,
1/2-14NPT
1NO/1NC, 3/4-14NPT
4L
4M
2NO/2NC, 3/4-14NPT
2NO/2NC, 3/4-14NPT,
sequential operation
4N
4S
2NO/2NC, 3/4-14NPT,
center neutral
2NO/2NC, gold
contacts, 3/4-14NPT
1C
2
2A
2C
1A
1Fixed roller,
1.5 in radius
Fixed 0.75 in x 0.25 in
nylon roller,
1.5 in radius
Fixed 0.75 in x 0.25 in
nylon roller,
1.5 in radius
Adjustable,
rollerless
Adjustable, 0.75 in x
0.25 in nylon roller
Adjustable, 0.75 in x
0.25 in nylon roller
2J
2K
Adjustable, 1.0 in x
0.5 in nylon roller
Adjustable, 0.5 in x
0.25 in nylon roller
3E
3M
Yoke, 0.75 in x
0.25 in nylon roller
Yoke, 0.75 in x
0.25 in nylon roller
3
4
5
6
2
1CW rotation
CCW rotation
Head assembled with
actuator to right side
Head assembled with
actuator to left side
Head assembled with
actuator toward
mounting surface
Roller perpendicular
to mounting surface
8Roller on side plunger
in vertical position
USide rotary,
low pre-travel
C
D
E
F
B
ASide rotary;
momentary
Top rotary;
momentary
Top plunger,
plain
Top plunger,
roller
Side plunger plain;
momentary
Side plunger roller;
momentary
HSide rotary, momentary;
low PT, low torque
J
K
Wobble stick
Whisker
3S Yoke, 0.75 in x
0.25 in nylon roller,
same side
4Hub only
4M
5
Hub rod,
aluminum
Offset,
rollerless
5A
5C
Offset, 0.75 in x
0.25 in nylon roller
Offset, 0.75 in x
0.25 in nylon roller
7A Plastic wobble
stick
8A
9A
Whisker,
5.5 in
Fixed, 0.75 in x 0.25 in
nylon roller, open,
1.33 in radius
9C Fixed, 0.75 in x 0.25 in
nylon roller, closed,
1.33 in radius
4T
4U 2NO/2NC, gold
contacts, 3/4-14NPT,
center neutral
7L
7M
2NO/2NC, 1/2-14NPT
2NO/2NC, 1/2-14NPT,
sequential operation
7N
7S
2NO/2NC, 1/2-14NPT,
center neutral
2NO/2NC, gold
contacts, 1/2-14NPT
7T 2NO/2NC, gold
contacts,1/2-14NPT,
sequential operation
7U 2NO/2NC, gold
contacts,1/2-14NPT,
center neutral
2NO/2NC, gold
contacts, 3/4-14NPT,
sequential operation
Not all combinations available. Please contact Honeywell for assistance.
To order high temperature versions, insert the additional letters Y and C in the appropriate places in the standard
catalog listing, as shown below:
LSXA3K standard, side-rotary plug-in switch
LSXYAC3K completely FC-sealed version of LSXA3K
To order low temperature versions, insert the additional letters Y and B in the appropriate places in the standard
catalog listing, as shown below:
LSXA3K standard, side-rotary plug-in switch
LSXYAB3K low-temperature version of LSXA3K
For more details, please see page 8.
Figure 2. MICRO SWITCH™ LSX SERIES NOMENCLATURE
7
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
Table 1. Specifications
Characteristic Parameter
Product type MICRO SWITCH™ hazardous area limit switches
Actuators
side pin plunger side pin plunger - adjustable side roller plunger
side rotary side rotary maintained top pin plunger
top pin plunger - adjustable top roller plunger top rotary
wobble - cat whisker wobble - plastic rod
Circuitry
1NC 1NO SPDT snap action, double break
2NC 2NO DPDT snap action, double break
2NC 2NO DPDT snap action, double break, sequential
2NC 2NO DPDT snap action, double break, center neutral
Electrical 10 A thermal
single and double pole: AC15 A600, AC15 B600; DC13 R300 (see table on page 8)
Housing material zinc head, aluminum body
Termination types 0.5 in - 14 NPT conduit
0.75 in - 14 NPT conduit
Housing type LSX non-plug-in
Agency approvals and
standards UL, CSA
Sealing NEMA 1, 3, 4, 6, 13
Hazardous area designations NEMA 7 (Class 1, Division 1 & 2, Groups B, C, D), NEMA 9 (Class 2, Division 1 & 2, Groups E, F, G)
Operating temperature* standard: -12 °C to 121 °C [10 °F to 250 °F]
optional: -40 °C to 121 °C [-40 °F to 250 °F]
UNSPSC code 39122213
UNSPSC commodity 39122213 Limit Switch
* Reference operating head styles on page 9 and 10 for exceptions.
8sensing.honeywell.com
LSX Series
TEMPERATURE LIMITS Standard LSX Low Temperature LSX
(Fluorosilicone Sealed): Y_B
High Temperature LSX
(Fluorocarbon Sealed)*: Y_C
Low Limit High Limit Low Limit High Limit Low Limit High
Limit
-12 °C
[10 °F]
-1 °C
[30 °F]
93 °C
[200 °F]
121 °C
[250 °F]
-40 °C
[-40°F]
-29 °C
[-20 °F]
93 °C
[200 °F]
121 °C
[250 °F]
-12 °C
[10 °F]
-1 °C
[30 °F]
121 °C
[250 °F]
LSXA - Side Rotary Momentary
LSXB - Top Rotary •••••
LSXC - Top Plain Plunger ••••••
LSXD - Top Roller Plunger ••••••
LSXE - Side Plain Plunger ••••••
LSXF - Side Roller Plunger ••••••
LSXH - Side Rotary, Low Diff, Low Torque •••••
LSXJ - Wobble Stick
LSXK - Cat Whisker
LSXL - Side Rotary, Sequence
LSXM - Side Rotary, Center Neutral
LSXN - Side Rotary, Maintained •••••
LSXP - Side Rotary, Low Diff
LSXR - Side Rotary, Low Torque •••••
LSXU - Side Rotary, 5º Low Pretravel
LSXV - Top Adjustable Plunger ••••••
LSXW - Side Adjustable Plunger ••••••
* For LSX application wherein the upper temperature limit is normally above 93 °C [200 °F], extended switch life can be obtained by using completely
uorocarbon-sealed switches rather than standard LSX.
MICRO SWITCH™ LSX SERIES ELECTRICAL
RATINGS: 10 A CONTINUOUS CARRY
ac VOLTS; PILOT DUTY: AC15, A600
Electrical
Rating
Circuitry Vac Amps at 0.35
Power Factor
Make
Amps at 0.35
Power Factor
Break
AC15,
A600
SPDT
DPDT
120 60 6
240 30 3
480 15 1.5
600 12 1.2
MICRO SWITCH™ LSX SERIES ELECTRICAL
RATINGS: dc VOLTS; PILOT DUTY: DC13, R300
Electrical
Rating
Circuitry Vdc Make & Break
Amps
Inductive
Make & Break
Amps
Resistive
DC13,
R300
SPDT
DPDT
120 0.25 0.8
240 0.15 0.4
MICRO SWITCH™ LSX limit switches are capable of the following
low voltage dc loads
Circuitry Vdc Amps
Inductive
Amps
Resistive
SPDT, DPDT 24 10 10
SWITCH CONTACT STYLES, DOUBLE BREAK
SPDT (1NC/1NO) DPDT (2NC/2NO)
SPDT
Double Break
DPDT
Double Break
Center Neutral (SPDT each direction)
Pole 1 operates CCW; Pole 2 operates CW
NOTE: Same polarity each pole
9
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
MICRO SWITCH™ LSX SERIES OPERATING
HEADS
SIDE ROTARY: Heads may be positioned in any one of four posi-
tions, 90° increments. All are momentary action except maintained
head (LSXN Series).
LSXA - Standard: 60° minimum over-
travel, 15° maximum pretravel,
5° (single pole) and 7° (double pole) maxi-
mum differential travel.
LSXR - Low operating torque: 60° minimum overtravel, 15°
maximum pretravel, 0.19 Nm [1.7 in-lb] maximum operating
torque.
LSXN - Maintained contact: Maintained on counterclockwise
rotation and reset on clockwise rotation, and vice versa.
LSXP - Low differential: 68° minimum overtravel, 9° maximum
pretravel, 3° (single pole) and 4° (double pole) maximum differen-
tial travel.
LSXH - Low torque, low differential travel: 68° minimum
overtravel. Features low operating torque and narrow differential
travel.
LSXL - Sequence action: 48° minimum overtravel. Delayed
action between operation of two poles.
LSXM - Center neutral: 57° minimum overtravel. One pole
operates on the clockwise rotation, and the other pole on the
counterclockwise rotation.
LSXU - Low pretravel: 5° max. pretravel, 70° min. overtravel.
TOP ROTARY: Available levers provide greater versatility. Heads
may be positioned in any one of four positions, 90° increments. All
are momentary action.
LSXB: With 100° minimum overtravel.
Various levers that t side rotary shafts may
be used on the top rotary shaft. Switch is
suitable for use when increased overtravel
is required.
HIGH TEMPERATURE/CHEMICAL RESISTANT
SWITCHES
Completely uorocarbon (FC)-sealed switches have a full FC body
gasket covering the switch cavity. Rotary types have an extra
FC seal on the operating shaft, while plunger versions have FC
boot seals. They are designed for use in applications where the
environment includes re-resistant synthetic uids. In addition,
the FC-sealed switches may be used with such industrial uids
as Cellulube, Fyrquell, Houghto-Safe, Pydraul, and other special
cutting and hydraulic uids. The additional FC seals also promote
extended operating life for rotary-actuated LSX switches in applica-
tions where the temperatures are normally -12 °C to 121 °C [10 °F
to 250 °F].
To order, insert the additional letters Y and C in the appropriate
places in the standard catalog listing, as shown below:
LSXA3K standard, side-rotary plug-in switch
LSXYAC3K completely FC-sealed version of LSXA3K
LOW TEMPERATURE SWITCHES
All forms of LSX limit switches are also available in low-temperature
construction. Design features include uorosilicone diaphragm,
shaft seals, and external boot seal (where applicable).
To order, insert the additional letters Y and B in the appropriate
places in the standard catalog listing, as shown below:
LSXA3K standard, side-rotary plug-in switch
LSXYAB3K low-temperature version of LSXA3K
SPECIAL OPTIONS
10 sensing.honeywell.com
LSX Series
TOP PLUNGERS: Available with 4,83 mm [0.19 in] minimum
overtravel. Top pin plungers are offered in pin plunger, an
adjustable plunger, and a roller plunger.
LSXC - Top pin plunger: A copper alloy
plunger for in-line actuating motion. Oil-
tight seals on plunger and between the
operating head and housing are designed
to keep out coolant, dust, and chips.
Momentary action.
LSXD - Top roller plunger: A copper
alloy roller plunger is adjustable to 90°
angles to accept cam or slide operation
from any of two directions. Boot seal on
the plunger. Momentary action.
LSXV - Adjustable top pin plunger: A
copper alloy adjustable plunger is designed
to simplify the application and decreases
installation time. The operating points of
the switch can be adjusted from 65,66
mm to 72,0 mm [2.585 in to 2.535 in].
Seals are the same as the pin plunger.
Momentary action.
MICRO SWITCH™ LSX SERIES OPERATING HEADS
SIDE PLUNGERS: Made of non-sparking copper alloy. Available
with 4,83 mm [0.19 in] minimum overtravel. Side plungers are of-
fered in plain plunger, an adjustable pin plunger, and a
roller plunger.
LSXE - Side pin plunger: A copper alloy
plunger for actuating motion inline with the
plunger travel. Actuating head may be ro-
tated in any of four positions, 90° apart. A
boot seal on the plunger and a gasket seal
between the head and housing is designed
to keep out coolant, dust, and chips. Mo-
mentary action.
LSXF - Side roller plunger: A copper
alloy roller plunger ts close quarters under
cams and slides. The head may be rotated
in any of four positions, 90° apart. The
roller can be turned vertical or horizontal to
the switch. Boot seal on plunger. Momen-
tary action.
LSXW - Adjustable side pin plunger:
Has the same features of the side plain
plunger plus the means to adjust the oper-
ating points of the switch from 41 mm to
47,4 mm [1.615 in to 1.865 in]. Momentary
action.
WOBBLE LEVER ACTUATING HEADS: Heads come with
either a Delrin® plastic rod or a copper alloy cat whisker. Any
movement of the lever (except pull) will actuate the switch.
LSXJ - Plastic rod:
Recommended where
possible scratching or
marring by the actuator is
to be avoided.
LSXK - Cat whisker:
Copper alloy actuator de-
signed for low operating
force applications.
11
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
SIDE ROTARY • MICRO SWITCH™ LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Standard
(LSXA)
Low Differential
(LSXP)
Low Torque
(LSXR)
Description Standard Low differential travel Low operating torque
SPDT DPDT SPDT DPDT SPDT DPDT
Contact closed n
Contact open o
1-2
3-4
3-4
1-2
75°
15° 10°

Snap Action
1NO/1NC
12
34
75°
15°

1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
Snap Action
2NO/2NC
12
34
56
78
1-2
3-4
3-4
1-2
75°

Snap Action
1NO/1NC
12
34
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
75°

Snap Action
2NO/2NC
12
34
56
78
1-2
3-4
3-4
1-2
75°
15° 10°

Snap Action
1NO/1NC
12
34
75°
15°
8°

1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
Snap Action
2NO/2NC
12
34
56
78
Pretravel 15° max. 9° max. 15° max.
Differential travel 5° max. 7° max. 3° max. 4° max. 5° max. 7° max.
Overtravel 60° min. 66° min. 60° min.
Operating torque 0,45 Nm [4 in-lb] max. 0,45 Nm [4 in-lb] max.
0,19 Nm [1.7 in-lb] max.
Action Momentary, CW, & CCW (Spring return)
Operating temperature
range2
-12 °C to 121 °C
[10 °F to 250 °F]
-1 °C to 121 °C
[30 °F to 250 °F]
Contacts Conduit (NPT)
SPDT
SPDT
Double Break
Silver 0.5 in LSXA3K LSXP3K LSXR3K
Silver 0.75 in LSXA4K LSXP4K LSXR4K
Gold10.5 in LSXA3E LSXP3E LSXR3E
DPDT
DPDT
Double Break
Silver 0.5 in LSXA7L LSXP7L LSXR7L
Silver 0.75 in LSXA4L LSXP4L LSXR4L
Gold10.75 in LSXA4S LSXP4S LSXR4S
1 Gold-plated contacts
2 Completely uorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
For low temperature or high temperature versions, see page 9.
12 sensing.honeywell.com
LSX Series
SIDE ROTARY • MICRO SWITCH™ LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Maintained Contact (LSXN) Low Torque (LSXH)
Description Maintained, 2-position Std. Momentary, low torque
SPDT DPDT SPDT DPDT
Contact closed n
Contact open o
85°
25°

65°
Maintained
Contact
12
34
1-2
3-4
3-4
1-2
85°
25°

65°
Maintained
Contact
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
12
34
56
78
85°

65°
Contact
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
12
34
56
78
1-2
3-4
3-4
1-2
75°

Snap Action
1NO/1NC
12
34
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
75°

Snap Action
2NO/2NC
12
34
56
78
Pretravel 65° max. 9° max.
Differential travel 40° max. 3° max. 4° max.
Overtravel 20° min. 66° min.
Operating torque 0,45 Nm [4 in-lb] max. 0,19 Nm [1.7 in-lb] max.
Action Maintained Momentary, CW, & CCW (Spring return)
Operating temp. range2-1 °C to 121 °C [30 °F to 250 °F] (for low temp or high temp versions, see page 9)
Contacts Conduit (NPT)
SPDT
SPDT
Double Break
Silver 0.5 in LSXN3K LSXH3K
Silver 0.75 in LSXN4K LSXH4K
Gold10.5 in LSXN3E LSXH3E
DPDT
DPDT
Double Break
Silver 0.5 in LSXN7L LSXH7L
Silver 0.75 in LSXN4L LSXH4L
Gold10.75 in LSXN4S LSXH4S
1 Gold-plated contacts
2 Completely uorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
For low temperature or high temperature versions, see page 9.
13
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
SIDE ROTARY • MICRO SWITCH™ LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS
Center Neutral (LSXM) Sequence Action (LSXL)
Description
Center Neutral
(Pole 1 operates CCW;
Pole 2 operates CW)
Sequential
(Pole 1 operates before Pole 2,
either CW, CCW, or both)
DPDT DPDT
Contact closed n
Contact open o
CW
18°
1-2
3-4
5-6
7-8
3-4
1-2
18°
7-8
5-6
CCW
75°
75°
1-2
3-4
5-6
7-8
75°
15°

25°
7-8
5-6
3-4
1-2
20°
10°
Pretravel 18° max. 1st: 15°; 2nd: additional 10°
Differential travel 10° max. each pole: 5°
Overtravel 57° min. 48° min.
Operating torque 0,45 Nm [4 in-lb] max. 0,45 Nm [4 in-lb] max.
Action CW & CCW (Spring return)
Operating temp. range2-1 °C to 121 °C [30 °F to 250 °F] -12 °C to 121 °C [10 °F to 250 °F]
Contacts Conduit (NPT)
DPDT
DPDT
Double Break
Silver 0.5 in LSXM7N LSXL7M
Silver 0.75 in LSXM4N LSXL4M
Gold10.5 in LSXM7U LSXL7T
Gold10.75 in LSXM4U LSXL4T
1 Gold-plated contacts
2 Completely uorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
For low temperature or high temperature versions, see page 9.
14 sensing.honeywell.com
LSX Series
Standard (LSXB)
Description Standard
SPDT DPDT
Contact closed n
Contact open o
1-2
3-4
3-4
1-2
135°
25°
15°

Snap Action
1NO/1NC
12
34
135°
25°
13°

1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
Snap Action
2NO/2NC
12
34
56
78
Pretravel 25° max.
Differential travel 10° max. 12° max.
Overtravel 110° min.
Operating torque 0,25 Nm [2.5 in-lb]
Action Momentary, CW, & CCW (Spring return)
Operating temp. range1-1 °C to 121 °C [30 °F to 250 °F] (for low temp or high temp versions, see page 9)
Contacts Conduit (NPT)
SPDT
SPDT
Double Break
Silver 0.5 in LSXB3K
Silver 0.75 in LSXB4L
1 Completely uorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
For low temperature or high temperature versions, see page 9.
TOP ROTARY • MICRO SWITCH™ LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS
15
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
Table 2. Common levers for use with MICRO SWITCH™ LSX Rotary Switches*
Levers for use with side-rotary-actuated switches are available in a wide choice of sizes and materials. The most common listings are
shown below. Rollers may be on either side of the lever to best match the external actuating mechanism.
Fixed lever, nylon roller
LSZ51A - front mount roller
LSZ51C - back mount roller
Short fixed lever, nylon roller
LSZ59A - front mount roller
LSZ59C - back mount roller
Offset lever, nylon roller
LSZ55A - back mount roller
LSZ55C - front mount roller
One-way lever, nylon roller
LSZ60A - front mount roller
Yoke lever, nylon rollers
LSZ53A - front/back mount rollers
Adjustable lever,
nylon roller
LSZ52A - back mount roller
LSZ52C - front mount roller
LSZ52J
adjustable lever,
nylon roller
25,4 mm [1 in]
LSZ52K
adjustable lever,
nylon roller
38,1 [1.5 in]
LSZ54M
aluminum rod
140 mm [5.5 in]
LSZ61
loop
152 mm [6 in]
LSZ67CA**
Plastic conveyor roller
LSZ68
rod with spring
305 mm [12 in]
* Non-sparking rollers and actuators must be used in hazardous areas.
** May require orientation of switch and lever to enable gravity to help restore switch’s free position.
16 sensing.honeywell.com
LSX Series
Catalog
Listing
Material Roller
Dia. mm
[in]
Roller
Width mm
[in]
Roller
Mounting
Fixed 38,1 mm [1.5 in] radius
LSZ51 Rollerless n/a n/a n/a
LSZ51A Nylon 19 [0.75] 6,35 [0.25] Front
LSZ51C Nylon 19 [0.75] 6,35 [0.25] Back
LSZ51F Nylon 25,4 [1.0] 12,7 [0.50] Front
LSZ51G Nylon 38,1 [1.5] 6,35 [0.25] Front
LSZ51J Nylon 25,4 [1.0] 12,7 [0.50] Back
LSZ51M Nylon 19 [0.75] 31,7 [1.25] Back
LSZ51P Nylon 19 [0.75] 12,7 [0.50] Front
LS2Z51A (sst) Nylon 19 [0.75] 6,35 [0.25] Front
LS2Z51C (sst) Nylon 19 [0.75] 6,35 [0.25] Back
LS2Z51E (sst) Copper alloy 19 [0.75] 6,35 [0.25] Front
LS2Z51F (sst) Copper alloy 19 [0.75] 6,35 [0.25] Back
Adjustable 38,1 mm [1.5 in] to 88,9 mm [3.5 in] radius
LSZ52 Rollerless n/a n/a n/a
LSZ52A Nylon 19 [0.75] 6,35 [0.25] Back
LSZ52C Nylon 19 [0.75] 6,35 [0.25] Front
LSZ52E Nylon 19 [0.75] 33,0 [1.30] Front
LSZ52J Nylon 25,4 [1.0] 12,7 [0.50] Front
LSZ52K Nylon 38,1 [1.5] 6,35 [0.25] Front
LSZ52M Nylon 50,8 [2.0] 6,35 [0.25] Front
LSZ52N Nylon 19 [0.75] 12,7 [0.50] Front
LS2Z52A (sst) Nylon 19 [0.75] 6,35 [0.25] Front
LS2Z52C (sst) Nylon 19 [0.75] 6,35 [0.25] Back
LS2Z52E (sst) Copper alloy 19 [0.75] 6,35 [0.25] Front
LS2Z52F (sst) Copper alloy 19 [0.75] 6,35 [0.25] Back
Yoke – 38,1 mm [1.5 in] radius
LSZ53A Nylon 19 [0.75] 6,35 [0.25] Front/Back
LSZ53E Nylon 19 [0.75] 6,35 [0.25] Back/Front
LSZ53M Nylon 19 [0.75] 31,7 [1.25] Back/Front
LSZ53S Nylon 19 [0.75] 6,35 [0.25] Back/Back
Rod
LSZ54 Hub only n/a n/a n/a
LSZ54M Alum, 140 mm
[5.5 in]
Ø 3,2
[Ø 0.125]
n/a n/a
LSZ54N Stainless, 330
mm [13 in]
Ø 3,2
[Ø 0.125]
n/a n/a
LSZ54P Plastic rod,
305 mm [12 in]
Ø6,85
[Ø 0.27]
n/a n/a
LSZ54W Plastic rod,
183 mm
[7.2 in]
Ø6,85
[Ø 0.27]
n/a n/a
Offset – 38,1 mm [1.5 in] radius
LSZ55 Rollerless n/a n/a n/a
LSZ55A Nylon 19 [0.75] 6,35 [0.25] Back
LSZ55C Nylon 19 [0.75] 6,35 [0.25] Front
LSZ55E Nylon 19 [0.75] 12,7 [0.50] Front
LSZ55K Nylon 38,1 [1.5] 6,35 [0.25] Front
Table 3. LSX Series Lever Order Guide
Catalog
Listing
Material Roller
Dia. mm
[in]
Roller
Width mm
[in]
Roller
Mounting
Short fixed - 33,02 mm [1.3 in] radius
LSZ59A Nylon 19 [0.75] 6,35 [0.25] Front
LSZ59C Nylon 19 [0.75] 6,35 [0.25] Back
One-way roller lever
LSZ60A Nylon 19 [0.75] 6,35 [0.25] Front
Flexible loop
LSZ61 Ø 4,8 [Ø 0.19 ]
Nylatron
152 mm [6 in] flexible loop
LSZ618 Ø 4,8 [Ø 0.19 ]
Nylatron
241 mm [9.5 in] flexible loop
LSZ54 Hub only n/a n/a n/a
Spring rod
LSZ68 Delrin rod, 305
mm [12 in]
Ø 6,35
[0.25]
n/a n/a
LSZ617 Delrin rod, 406
mm [16 in]
Ø 6,35
[0.25]
n/a n/a
LSZ686 Delrin rod, 152
mm [6 in]
Ø 6,35
[0.25]
n/a n/a
Rubber roller levers
LSZ51Y
38,1 [1.5] radius
(standard)
Rubber 50 [2.0] 12,7 [0.5] front
LSZ55Y
38,1 [1.5]
radius (offset)
Rubber 50 [2.0] 12,7 [0.5] front
LSZ52Y
38,1 to 89 [1.5
to 3.5] radius
(adjustable)
Rubber 50 [2.0] 12,7 [0.5] front
Plastic roller levers
LSZ67AA
(conveyor)*
Plastic 38,1 [1.5] 96,5 [3.8] n/a
* May require orientation of switch and lever to enable gravity to
help restore switch to free position.
17
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
Plain (LSXC) Roller (LSXD) Adjustable (LSXV)
Description
Top plain plunger for in-line
operating motion
Top roller plunger – can
be set at 90° increments
to accept cam or slide
actuation
Adjustable top plain
plunger simplies installa-
tion since operating point
can be adjusted from
65,66 mm min.;
72,0 mm max.
[2.585 in min;
2.835 in max.]
SPDT DPDT SPDT DPDT SPDT DPDT
Contact closed n
Contact open o
1-2
3-4
3-4
1-2
6,6 mm
[0.26 in]
0 in
[0.07 in]
1,4 mm
[0.055 in]

Snap Action
1NO/1NC
12
34
1,78 mm
0 in
1,4 mm
[0.07 in]
1,27 mm
[0.050 in]

1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
Snap Action
2NO/2NC
12
34
56
78
6,6 mm
[0.26 in]
1-2
3-4
3-4
1-2
6,6 mm
[0.26 in]
0 in
[0.07 in]
1,4 mm
[0.055 in]

Snap Action
1NO/1NC
12
34
1,78 mm
0 in
1,4 mm
[0.07 in]
1,27 mm
[0.050 in]

1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
Snap Action
2NO/2NC
12
34
56
78
6,6 mm
[0.26 in]
1-2
3-4
3-4
1-2
6,6 mm
[0.26 in]
0 in
[0.07 in]
1,4 mm
[0.055 in]

Snap Action
1NO/1NC
12
34
1,78 mm
0 in
1,4 mm
[0.07 in]
1,27 mm
[0.050 in]

1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
Snap Action
2NO/2NC
12
34
56
78
6,6 mm
[0.26 in]
Pretravel 1,78 mm [0.07 in]
Differential travel 0,38 mm
[0.015 in]
0,51 mm
[0.02 in]
0,38 mm
[0.015 in]
0,51 mm
[0.02 in]
0,38 mm
[0.015 in]
0,51 mm
[0.02 in]
Overtravel 4,83 mm [0.19 in]
Operting force 17,8 N [4 lb] max.
Operating point
58,55 mm ±0,76 mm
[2.305 in ±0.030 in]
68,58 mm ±1,02 mm
[2.70 in ±0.040 in]
65,66 mm min.;
72,0 mm max.
[2.585 in min; 2.835 in max.]
Operating temp. range2-12 °C to 93 °C [10 °F to 200 °F] (for low temp or high temp versions, see page 9)
Contacts Conduit (NPT)
SPDT
SPDT
Double Break
Silver 0.5 in LSXC3K LSXD3K LSXV3K
Silver 0.75 in LSXC4K LSXD4K LSXV4K
Gold10.5 in LSXC3E LSXD3E LSXV3E
DPDT
DPDT
Double Break
Silver 0.5 in LSXC7L LSXD7L LSXV7L
Silver 0.75 in LSXC4L LSXD4L LSXV4L
Gold10.75 in LSXC4S LSXD4S LSXV4S
1 Gold-plated contacts
2 Completely uorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
For low temperature or high temperature versions, see page 9.
TOP PLUNGER • MICRO SWITCH™ LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS
All top plungers are momentary action.
18 sensing.honeywell.com
LSX Series
Plain (LSXE) Roller (LSXF) Adjustable (LSXW)
Description
Side plain plunger for in-
line operating motion
Side roller plunger – can
be set at 90° increments
to accept cam or slide
actuation
Adjustable side plain
plunger simplies installa-
tion since operating point
can be adjusted from
41 mm min.;
47,37 mm max.
[1.615 in min.;
1.865 in max.]
SPDT DPDT SPDT DPDT SPDT DPDT
Contact closed n
Contact open o
1-2
3-4
3-4
1-2
7,36 mm
[0.29 in]
0 in
2,54 mm
[0.10 in]
1,4 mm
[0.055 in]

Snap Action
1NO/1NC
12
34
0 in

1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
Snap Action
2NO/2NC
12
34
56
78
7,36 mm
[0.29 in]
2,54 mm
[0.10 in]
1,4 mm
[0.055 in]
Pretravel 2,54 mm [0.10 in]
Differential travel 1,14 mm [0.045 in]
Overtravel 4,83 mm [0.19 in]
Operting force 26,7 N [6 lb] max.
Operating point
33,02 mm ±0,76 mm
[1.300 in ±0.030 in]
44,07 mm ±1,02 mm
[1.735 in ±0.04 in]
41 mm min.;
47,37 mm max.
[1.615 in min.; 1.865 in
max.]
Operating temp. range2-12 °C to 93 °C [10 °F to 200 °F] (for low temp or high temp versions, see page 9)
Contacts Conduit (NPT)
SPDT
SPDT
Double Break
Silver 0.5 in LSXE3K LSXF3K LSXW3K
Silver 0.75 in LSXE4K LSXF4K LSXW4K
Gold10.5 in LSXE3E LSXF3E LSXW3E
DPDT
DPDT
Double Break
Silver 0.5 in LSXE7L LSXF7L LSXW7L
Silver 0.75 in LSXE4L LSXF4L LSXW4L
Gold10.75 in LSXE4S LSXF4S LSXW4S
1 Gold-plated contacts
2 Completely uorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
For low temperature or high temperature versions, see page 9.
SIDE PLUNGER • MICRO SWITCH™ LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS
All side plungers are momentary action. Heads may be positioned to accept actuation from any of four directions, 90° apart.
19
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
WOBBLE • MICRO SWITCH™ LSX SERIES ORDER GUIDE/RECOMMENDED LISTINGS
LSJ1A-7A
- Plastic
rod
LSK1A-
8A - Cat
whisker
LSXJ Series
7A Actuator
LSXK Series
8A Actuator
Description Delrin® plastic rod lever (wobble stick) Cat whisker actuator for low operating
force applications
SPDT DPDT SPDT DPDT
Contact closed n
Contact open o
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
75°
12°

Snap Action
2NO/2NC
12
34
56
78
-8A
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
75°
25°
15°

Snap Action
2NO/2NC
12
34
56
78
Actuator length 152,4 mm [6 in] 139,7 mm [5.5 in] copper alloy
Pretravel 25,4 mm [1.0 in] 51,0 mm [2.0 in]
Operating force 2,78 Nm [10 oz] 1,39 Nm [5 oz]
Operating temp. range2-12 °C to 93 °C [10 °F to 200 °F] (for low temp or high temp versions, see page 9)
Contacts Conduit (NPT)
SPDT
SPDT
Double Break
Silver 0.5 in LSXJ3K-7A LSXK3K-8A
Silver 0.75 in LSXJ4K-7A LSXK4K-8A
Gold10.5 in LSXJ3E-7A LSXK3E-8A
DPDT
DPDT
Double Break
Silver 0.5 in LSXJ7L-7A LSXK7L-8A
Silver 0.75 in LSXJ4L-7A LSXK4L-8A
Gold10.75 in LSXJ4S-7A LSXK4S-8A
1 Gold-plated contacts
2 Completely uorocarbon sealed switches are preferred for use in temperatures above 93 °C [200 °F]
For low temperature or high temperature versions, see page 9.
20 sensing.honeywell.com
LSX Series
REPLACEMENT CONTACT BLOCKS
Circuitry Replacement Contact Block
Single pole LSXZ3K
Double pole LSXZ3L
Sequence or
central neutral
LSXZ3M
REPLACEMENT HEADS FOR STANDARD
LSX SWITCHES
Switch Type Catalog Listing/Operating Head Only
LSXA LSXZ1A
LSXB LSXZ1B
LSXC LSXZ1C
LSXD LSXZ1D
LSXE LSXZ1E
LSXF LSXZ1F
LSXH LSXZ1H
LSXJ LSXZ1JGA
LSXK LSXZ1KHA
LSXL LSXZ1L
LSXM LSXZ1M
LSXN LSXZ1N
LSXP LSXZ1P
LSXR LSXZ1R
LSXU LSXZ1U
LSXV LSXZ1V
LSXW LSXZ1W
ASSEMBLY MODIFICATIONS
Momentary action rotary switches can be furnished in other than
the normal assembled conditions. To specify modications, add the
numbers shown below to the catalog listings. Modication number
sufxes are:
1 Clockwise actuation only
2 Counterclockwise actuation only
3 Shaft to right of switch front
4 Shaft to left of switch front
5 Shaft to back of switch
For example,
Catalog listing LSXA3K23 is a LSXA3K switch adjusted for counter-
clockwise actuation only. The operating shaft is to the right side of
the switch when viewing it from the front (label side). No lever.
PLUNGER ASSEMBLY MODIFICATIONS
Add the following modication numbers to the catalog listing in the
plunger switch:
3 Side plunger to right of switch front
4 Side plunger to left of switch front
5 Side plunger to back of switch
6 Roller on top plungers perpendicular to mounting surface
8 Roller on side plungers in vertical position
For example,
Catalog listing LSXF3K3 is a LSXF3K switch with the side roller
plunger to the right side.
ADAPTER PLATE
Catalog listing LSXZ4022 adapter plate enables the NEMA-rated,
explosion-proof LSX Series to be mounted on existing HDLS
mounting holes. The LSX has a recessed back into which the
adapter plate ts and mounts, using two screws (furnished)
1/2 in or 3/4 in
conduit openings
59,5 mm
[2.344 in]
29,4 mm
[1.156 in]
21
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
Figure 3. MICRO SWITCH™ LSX SERIES PRODUCT REFERENCE DIMENSIONS • mm [in]
SIDE ROTARY - HEAD CODES: A, H, L, M, N, P, Q, R, AND U
85,6
[3.38]
46,5
[1.83]
38,1
[1.50]
97,0
[3.82]
49,3
[1.94]
50,8
[2.00]
19,05
[.75]
31,8
[1.25]
116,8
[4.60]
39,6
[1.56]
25,4
[1.00]
76,2
[3.00]
74,4
[2.93]
25,4
[1.00]
41,4
[1.63]
62,7
[2.47]
7,32
[.29]
CONDUIT OPENING
DIA
2X 5.0 [0.20] DIA
MOUNTING HOLES
2X 5/16-18 UNC 28
TAPPED FROM REAR ONLY
0.875 THREAD DEPTH
Figure 4. MICRO SWITCH™ LSX SERIES WOBBLE STICK,
HEAD CODE J • mm [in]
Figure 5. MICRO SWITCH™ LSX SERIES CAT WHISKER WOB-
BLE, HEAD CODE K • mm [in]
19.05
[0.75]
152,4
[6.00]
Ø6,35
[Ø0.25]
0,84
[21.3]
76,2
[3.00]
J HEAD
11,94
[0.047]
77,7
[3.06]
152,4
[6.0]
12,3
[0.845]
K HEAD
22 sensing.honeywell.com
LSX Series
Figure 6. MICRO SWITCH™ LSX SERIES TOP ROTARY,
HEAD CODE B • mm [in]
Figure 7. MICRO SWITCH™ LSX SERIES TOP PIN PLUNGER,
HEAD CODE C • mm [in]
Figure 8. MICRO SWITCH™ LSX SERIES TOP ROLLER
PLUNGER, HEAD CODE D • mm [in]
Figure 9. MICRO SWITCH™ LSX SERIES SIDE PLUNGER,
HEAD CODE E • mm [in]
Figure 11. MICRO SWITCH™ LSX SERIES SIDE ROLLER
PLUNGER, HEAD CODE F • mm [in]
Figure 10. MICRO SWITCH™ LSX SERIES ADJUSTABLE TOP
PIN PLUNGER, HEAD CODE V • mm [in]
Figure 12. MICRO SWITCH™ LSX SERIES ADJUSTABLE SIDE
PIN PLUNGER, HEAD CODE W • mm [in]
72,0 - 65,7
[2.835 MAX - 2.585 MIN]
OPERATING POINT
19,0
5
[.75]
21,6
[.85]
7,92
[3.12]
ACROSS
FLATS
V HEAD
31,8
[1.25]
19,0
5
[.75]
41,0 MIN - 47,4 MAX
[1.615 MIN - 1.865 MAX]
OPERATING POINT
0,85
[21.6
]
7,92
[3.12]
ACROSS
FLATS
W HEAD
69,9
[2.75]
19,05
[.75]
21,6
[.85]
7,32
[0.29]
55,1
[2.17]
B HEAD
MTG PADS
OPERA
TING
POINT
59,7
[2.35]
9,5
[0.373]
19,05
[0.75]
21,6
[0.85]
MTG PADS
C HEAD
OPERA
TING POINT
68.6
[2.700]
21,5
[0.845]
19,05
[.75]
4,7
[0.185] Ø12,7
[Ø 0.50]
D HEAD
MTG PADS
33.0
[1.30]
OPERATING POINT
9.47
[0.373]
31.75
[1.25]
19,05
[0.75]
21,5
[8.45]
E HEAD
MTG PADS
31,75
[1.25]
19,05
[0.75]
3,81
[0.15]
Ø12,7
[Ø0.50]
44.1
[1.735]
OPERATING POINT
21,6
[0.85]
F HEAD
23
sensing.honeywell.com
MICRO SWITCH™ Hazardous Area Limit Switches
LSXA3E
LSXA3E-1A
LSXA3E-2K
LSXA3E1
LSXA3E24-1A
LSXA3K
LSXA3K-1A
LSXA3K-1C
LSXA3K-2C
LSXA3K-2J
LSXA3K-2K
LSXA3K-4M
LSXA3K-5C
LSXA3K1
LSXA3K1-1C
LSXA3K1-2C
LSXA3K4-4M
LSXA3K5
LSXA3K5-1A
LSXA3K5-4M
LSXA3K5-5C
LSXA3N
LSXA4K
LSXA4K-1A
LSXA4K-2C
LSXA4K-2J
LSXA4L
LSXA4L-1A
LSXA4L-1C
LSXA4L-2C
LSXA4L-2K
LSXA4L-4M
LSXA4L-5C
LSXA4L13-2J
LSXA4L2-1C
LSXA4L3-2C
LSXA4L4-1A
LSXA4L4-2C
LSXA4L5
LSXA4L5-1A
LSXA4S
LSXA4S-2K
LSXA4S13-2C
LSXA4S5
LSXA7L
LSXA7L-1A
LSXA7S
LSXA7S-2
LSXA7S1-1C
LSXA7S2-1C
LSXB3K
LSXB3K-4M
LSXB4L
LSXB4L-1C
LSXB4L-4M
LSXC3E
LSXC3K
LSXC4K
LSXC4L
This datasheet supports the following MICRO SWITCH™ LSX Series Hazardous Area Limit Switches
LSXC4S
LSXC7L
LSXD3E
LSXD3K
LSXD3K6
LSXD4K
LSXD4L
LSXD4L6
LSXD7L
LSXE3K
LSXE3K3
LSXE3K4
LSXE4K
LSXE4L
LSXF3E
LSXF3K
LSXF3K5
LSXF3K8
LSXF4L
LSXF4L5
LSXF7L
LSXF7L5
LSXH3K
LSXH3K-2C
LSXH3K-4M
LSXH3K3-2C
LSXH4K
LSXH4L
LSXH4L-4
LSXH4L3
LSXH7L4-1A
LSXJ3E-7A
LSXJ3K-7A
LSXJ4L-7A
LSXJ4S-7A
LSXJ7L-7A
LSXK3K-8A
LSXK4L-8A
LSXL4M
LSXL4M4
LSXL7M-2C
LSXM4N
LSXM4N-1A
LSXM4N-1C
LSXM4N-2C
LSXM4N-2J
LSXM4N-3S
LSXM4N-4M
LSXM4N-5C
LSXM4N3-1A
LSXM4N4
LSXM4N4-1A
LSXM4N5
LSXM4N5-1A
LSXM4U
LSXM7N
LSXM7N-1A
LSXM7U
LSXN3K
LSXN3K-1A
LSXN3K-4M
LSXN4K
LSXN4L
LSXN4L-1A
LSXN4L-2C
LSXN4L-3S
LSXN4L4
LSXN4S-3S
LSXN7L
LSXN7L-2A
LSXP3E
LSXP3K
LSXP3K-1A
LSXP3K-1C
LSXP3K-5C
LSXP3K1
LSXP3K3
LSXP3K3-1A
LSXP3K5-1A
LSXP4K
LSXP4K-2C
LSXP4L
LSXP4L-2C
LSXP4L3-2C
LSXP7L
LSXP7L14-2C
LSXP7L3
LSXQA3K332
LSXQC4C
LSXR3K
LSXR3K-1A
LSXR3K-1C
LSXR3K-5A
LSXR4K-2C
LSXR4L
LSXR4L-1C
LSXR4L-2J
LSXR4L-5A
LSXR4L-5C
LSXR4L1
LSXR4L24
LSXU3K
LSXV3K
LSXV4L
LSXV4S
LSXV7L
LSXW3K
LSXW3K3
LSXW4L
LSXW7L
LSXYAB3E
LSXYAB3K
LSXYAB3K-1A
LSXYAB3K2
LSXYAB3K2-5C
LSXYAB3K5-2C
LSXYAB4K
LSXYAB4K-1A
LSXYAB4L
LSXYAB4L-1A
LSXYAB4L4
LSXYAB4L5-1A
LSXYAB7L
LSXYAC3K
LSXYAC3K-2C
LSXYAC4L
LSXYBB3K
LSXYBB4L
LSXYCB3K
LSXYCB4L
LSXYCC3K
LSXYCC4L
LSXYDB3K
LSXYDB4L
LSXYDC7L
LSXYEB3K
LSXYEC3K
LSXYFB3K
LSXYHB3K-2C
LSXYJB3K-7A
LSXYLB4M
LSXYMB4N
LSXYMB4N-1A
LSXYMB4N-2C
LSXYMB4N5-1A
LSXYMC4N
LSXYNB3K
LSXYNB3N-1A
LSXYNB4L
LSXYPB3K
LSXYPB4L
LSXYPB4S
LSXYPC4L5
LSXYRB3K
LSXYVC3K
LSXYWC3K
LSXYWC4L5
LSXZ1C
LSXZ1CB
LSXZ1CC
LSXZ1D
LSXZ1DB
LSXZ1DC
LSXZ1E
LSXZ1EB
LSXZ1EC
LSXZ1F
LSXZ1FB
LSXZ1FC
LSXZ1KHA
LSXZ1V
LSXZ1VB
LSXZ1VC
LSXZ1W
LSXZ1WB
LSXZ1WC
LSXZ23E
LSXZ23EB
LSXZ23K
LSXZ23KB
LSXZ23N
LSXZ23NB
LSXZ24K
LSXZ24KB
LSXZ24L
LSXZ24LB
LSXZ24M
LSXZ24MB
LSXZ24N
LSXZ24NB
LSXZ24S
LSXZ24SB
LSXZ24SC
LSXZ24T
LSXZ24TB
LSXZ24TC
LSXZ24U
LSXZ24UB
LSXZ24UC
LSXZ27L
LSXZ27LB
LSXZ27N
LSXZ27NB
LSXZ27S
LSXZ27SB
LSXZ27SC
LSXZ27T
LSXZ27TB
LSXZ27TC
LSXZ27U
LSXZ27UB
LSXZ27UC
LSXZ3E
LSXZ3K
LSXZ3L
LSXZ3M
LSXZ3S
LSXZ4012
LSXZ4022
24 sensing.honeywell.com
LSX Series
ADDITIONAL INFORMATION
The following associated literature is available on the Honeywell web
site at sensing.honeywell.com:
Product installation instructions
Product range guide
Hazardous area product brochure
Product application-specific information
– Application note: Electronic sensors and electromechanical
switches in valves and flow meters
– Application note: MICRO SWITCH™ switches in conveyor
applications
– Application note: Sensors and switches for industrial manual
process valves
– Application note: Sensors and switches used in valve actuators
and valve positioners
Limit and enclosed switches reference standards
– Sensors and switches in oil rig applications
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particu-
lar purpose. In no event shall Honeywell be liable for conse-
quential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
002385-2-EN IL50 GLO
August 2014
Copyright © 2014 Honeywell International Inc. All rights reserved.
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com, or
e-mail inquiries to
info.sc@honeywell.com