Amphenol QWL Series
Cylindrical Connectors
12-053-4
Am
p
henol
®
1
Description Page
Amphenol® Heavy Duty Cylindrical Connectors
QWL Series ......................................................... 2
QWL
the environmental connector ............................... 3
QWL
how to order ..................................................... 4, 5
QWL
10-1070 wall mount receptacle ............................ 6
QWL
10-1071 cable connecting plug ............................ 7
QWL
10-1072 box mount receptacle ............................ 8
QWL
10-1073 jam nut receptacle (wall mount) ............. 9
QWL
10-1074 thru bulkhead receptacle ..................... 10
QWL
10-1076 straight plug ......................................... 11
QWL
10-1077 flange mount plug ................................ 12
QWL
10-1079 jam nut receptacle (box mount) ........... 13
QWL
insert arrangements
selection guide .............................................. 14-16
QWL
alternate positioning ........................................... 17
QWL
contact insert arrangements ......................... 18-29
QWL
special contact insert arrangements ............. 30-40
QWL - accessories
cabling information ...................................... 41, 42
Description............................................................... Page
QWL - accessories
10-130380 cable sealing adapter
(with clamp bars) .......................................... 43, 44
QWL - accessories
10-10133X cable sealing adapters ................ 45-48
QWL - accessories
10-113637 cable sealing adapter (with woven
strain relief) ....................................................49-52
QWL - accessories
adapter, cable clamp .......................................... 53
QWL - accessories
adapter, cable clamp, sealing plugs .............. 54-56
QWL - accessories
protection caps ............................................. 57, 58
QWL - accessories
flange gasket, grip banding clamp ...................... 59
QWL
crimp contacts .................................................... 60
QWL
solder contacts ................................................... 61
QWL
application tools (crimp type) ...............................62
QWL
thermocouple contacts
and arrangements ......................................... 63-69
Other Heavy Duty Connectors Offered by
Amphenol .............................................................70
Sales Office Listing
TABLE OF CONTENTS
For additional information concerning the
Amphenol® QWL Series Cylindrical Connector, or if
there are special application requirements, contact
your local sales office or
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave.
Sidney, New York 13838-1395
Telephone: 607-563-5011
Fax: 607-563-5351
www.amphenol-aerospace.com
(Most Amphenol catalogs can be viewed, printed
and down-loaded from the website)
Amphenol Aerospace operates Quality Systems
that are Certified to ISO-9001 and AS-9100 by third
party Registrars.
2
Amphenol Heavy Duty
Cylindrical Connectors
QWL Series
wall mount receptacle thru bulkhead receptacle
straight plug
cable connecting plug
box mount receptacle flange mount plug
jam nut receptacle jam nut receptacle
(wall mount) (box mount)
Amphenol® QWL Series Connec-
tors are tailor made for compact,
heavy duty industrial use.
The outstanding performance of this
series makes it well suited for ship-
board installations and ground sup-
port power distribution applications
where physical strength and depend-
ability are key requirements.
The QWL Series are a versatile,
economical alternative to military
qualified designs.
Equivalent MS shell sizes and insert
arrangements offer compatibility with
all standard cable types. MIL-C-22992
environmental connector require-
ments (see page 1) are used as a per-
formance criteria base for this series
to assure reliability under the most
severe conditions.
The design features of this connec-
tor series provide:
Exceptional Service - high
strength aluminum shells with Alu-
milite 225* hard anodic finish and
shock resistant resilient inserts.
Foolproof Operation - rugged
double stub coupling threads, left
hand accessory threads and sim-
ple single keyway mating.
Versatility - both MS and custom
insert patterns available for a wide
variety of multiconductor cables.
A complete line of accessories is
available for use with QWL Series
connectors, including cable sealing
and clamp adapters, protective cov-
ers, flange gaskets and banding
clamps.
* Registered trademark of Aluminum
Company of America
®
3
QWL
the environmental connector
HIGH CURRENT CAPACITY for power distribution network and inputs to
large equipment
RUGGED CONSTRUCTION dictated by the working environment, high
strength aluminum shells with Alumilite 225* hard anodic finish, shock resis-
tant resilient inserts, gaskets or “O” rings at appropriate surfaces for perfect
weather tight connections.
SERVICEABILITY AND FOOL-PROOF OPERATION with fast coupling, easily
maintained double stub threads, left hand accessory threads and single
keyway mating.
VERSATILITY - both MS and custom insert patterns available to accommo-
date a wide variety of multi conductor cables.
CONDITION CONFIGURATION DESCRIPTION REFERENCE
THERMAL
SHOCK
UNMATED Five complete one hour temperature
cycles of –55°C to +125°C
MIL-STD-1344
method 1003
test condition
MOISTURE
RESISTANCE
(Cable mounted
connectors)
MATED Ten complete 24 hour cycles of
+25°C to +65°C temperature at 90%
to 98% humidity
MIL-STD-202
method 106
DURABILITY MATED 500 complete mating/unmating cycles MIL-C-22992
SALT SPRAY
(Corrosion)
UNMATED 48 hour exposure to atomized 5%
saline solution at +35°C
MIL-STD-1344
method 1001
VIBRATION MATED 10 to 55 Hz, .06 inch total excursion
in 1 minute cycles for 6 hours
55 to 2000 Hz, 10G peak amplitude
sweep
MIL-STD-1344
method 2005
HIGH IMPACT MATED Nine hammer blows from 1, 3 and
5 feet, three each in three axes
on mounting panel
MIL-STD-202
method 207
FLUID
IMMERSION
UNMATED 20 hours immersion in hydraulic
fluid and lubricating oil
MIL-C-22992
WATER
IMMERSION
MATED 4 hours immersion at 1 atmosphere
pressure differential
MIL-C-22992
* Registered trademark of Aluminum
Company of America
HIGH CURRENT CAPACITY for power distribution network and inputs to
large equipment
RUGGED CONSTRUCTION dictated by the working environment, high
strength aluminum shells with Alumilite 225* hard anodic finish, shock resis-
tant resilient inserts, gaskets or “O” rings at appropriate surfaces for perfect
weather tight connections.
SERVICEABILITY AND FOOL-PROOF OPERATION with fast coupling, easily
maintained double stub threads, left hand accessory threads and single
keyway mating.
VERSATILITY - both MS and custom insert patterns available to accommo-
date a wide variety of multi conductor cables.
4
QWL
how to order
QWL heavy duty cylindrical connectors are ordered by Amphenol® part number only. To
illustrate the ordering procedure, part number 10-107628-5P is shown as follows:
PART NUMBER
10 -1076 28-5 P
12345
See code below:
1. Base Number Prefix - used to define contact type and finish.
10- Solder type contacts, silver plated (Standard)
75- Crimp type contacts, silver plated
81- Crimp type contacts, plated .0001 gold over silver
82- Crimp type contacts for MIL-C-13777 cable, silver plated
83- Crimp type contacts for MIL-C-13777 cable, plated .0001 gold over silver
85- Crimp type contacts plated .00005 gold over silver
2. Base Number - QWL Series Heavy Duty Cylindrical Connector.
3. Shell Style -
0 designates wall mount receptacle
1 designates cable connecting plug
2 designates box mount receptacle
3 designates jam nut receptacle with rear accessory threads (wall mount)
4 designates thru bulkhead receptacle
6 designates straight plug
7 designates flange mount plug
9 designates jam nut receptacle (box mount)
4. Shell Size/Insert Arrangement - Amphenol® QWL connectors are available in equivalent MS shell
sizes with all current MS insert arrangements as well as a large selection of special arrangements for
power and signal circuits. Select the required insert arrangement number from those shown on pages
18-40.
5. Contact Type/Alternate Insert Rotations - P for pin, S for socket. When an alternate position of
the connector insert is required to prevent cross mating of connectors, a different letter (other than P or
S) is used. Select from the table below the Amphenol® letter which indicates both type of contact, and
insert rotation desired. Refer to page 17 for alternate insert rotations.
PIN CONTACTS SOCKET CONTACTS
MS
LETTERS
AMPHENOL®
LETTER
MS
LETTERS
AMPHENOL®
LETTER
P
PW
PX
PY
PZ
P (normal)
G
I
K
M
S
SW
SX
SY
SZ
S (normal)
H
J
L
N
5
QWL
how to order, cont.
ACCESSORIES
Cable Sealing Adapters - these are the basic connector accessories which provide moisture proofing and cable strain
relief. Selection is made on the basis of accessory style, shell size and cable dimensions. To illustrate the ordering proce-
dure, part number 10-101335-361 is shown as follows:
PART NUMBER
10 - 101335 -361
12
See code below:
1. Accessory Base Number - refer to pages 41 through 52 for descriptions and dimensional data.10-101332 designates
short barrel length with woven strain relief grip
10-101333 designates short barrel length without strain relief
10-101334 designates short barrel length with woven strain relief grip and attaching ring for protection cap with bead
chain
10-101335 designates short barrel length with attaching ring for protection cap with bead chain
10-101380 designates short barrel length with attaching ring for protection cap with bead chain and clamp type strain
relief bars
10-113637 designates long barrel length with woven strain relief and attaching ring for protection cap with bead chain
2. Part Number – represents connector shell size and range of cable diameters accommodated by the sealing adapter.
Refer to the page listed below to determine the part number required for the accessory style being used:
Accessory Series Page
10-10133X 46 - 48
10-130380 44
10-113637 50 - 52
Cable Clamp 10-749XX-( ) and Adapter 10-113196-XX
Connectors which require weatherproofing on open wire cables are provided with a moisture seal by this cable clamp, a
modification of the MS3057B design. A rubber grommet with holes for individual wires is used in place of the sleeve. As the
assembly is tightened, the grommet is compressed around each wire, sealing out moisture.
Order this clamp by the part number listed on page 53 to accommodate the connector being used. Suffix the part number
with the connector insert arrangement number.
To attach the cable clamp to the left hand accessory threads of QWL connectors, Adapter 10-113196-XX is needed. Finish
is non-conductive Alumilite. Order by adapter part number listed on page 53 to accommodate the connector shell size
being used. For a moisture proof seal, unused grommet holes must be filled with the appropriate size sealing plug or seal-
ing rod selected from the table on page 53. Sealing plug or sealing rods must be ordered separately.
M85049/1 Cable Clamp and Adapter 10-113138-XX - order this clamp by the M85049( )C part number listed on page 55
to accommodate the cable type being used. To attach the cable clamp to the left hand accessory threads of QWL connec-
tors, Adapter 10-113138-XX is needed. Order by adapter part number listed on page 55 to accommodate the connector
shell size being used. Standard finish on the clamp is olive drab, cadmium plate. Adapter finish is non-conductive Alumilite.
MS3420-( )A sleeve, to facilitate sealing on smaller diameter cables, must be ordered separately. MS3420-( )A sleeves
may be nested to accommodate smaller cable diameters.
Plug Protection Caps -
10-101046-( ) designates plug cover with chain, Alumilite 225 finish
10-101531-( ) designates plug cover with chain and eyelet end, Alumilite 225 finish
Order these plug covers by the part number listed on page 57 for the appropriate connector shell size.
Receptacle Protection Caps -
10-101063-( ) designates receptacle cover with chain, Alumilite 225 finish
10-101048-( ) designates receptacle cover with chain and eyelet, Alumilite 225 finish
Order these receptacle covers by the part number listed on page 57 for the appropriate connector shell size.
Flange Gasket -
10-36675-( ) for operating temperature range –67° to +275°F
10-40450-( ) for operating temperature range 0° to +257°F
Order by part number listed on page 59 for appropriate connector shell size.
10-183249 Grip Banding Clamp - order this stainless steel clamp by part number listed on page 59 to accommodate
cable diameter being used.
6
SR
T
4 HOLES
S
R
B
MW
KZ
A
THREAD
V
LEFT HAND
QWL
10-1070XX
wall mount receptacle
All dimensions for reference only.
*For complete order number see page 4
Part
Number*
Shell
Size
A
Thread
Class 2A
B
Min
Full
Thread
K
±.015
M
+.016
–.000
R
±.005
S
±.020
T
Dia
+.004
–.003
V
Thread
Class 2A-LH
W
±.010
Z
Max
10-107010 10S .6250-0.05P-0.1L-DS .391 .704 .562 .719 1.000 .150 .500-28UNEF .400 .450
10-107012 12S .7500-0.1P-0.2L-DS .391 .704 .562 .812 1.094 .150 .625-24UNEF .400 .450
10-107013 12 .7500-0.1P-0.2L-DS .625 .891 .750 .812 1.094 .150 .625-24UNEF .588 .700
10-107014 14S .8750-0.1P-0.2L-DS .391 .704 .562 .906 1.188 .150 .750-20UNEF .400 .450
10-107015 14 .8750-0.1P-0.2L-DS .625 .891 .750 .906 1.188 .150 .750-20UNEF .588 .700
10-107016 16S 1.0000-0.1P-0.2L-DS .391 .704 .562 .969 1.281 .150 .875-20UNEF .400 .450
10-107017 16 1.0000-0.1P-0.2L-DS .625 .891 .750 .969 1.281 .150 .875-20UNEF .588 .700
10-107018 18 1.1250-0.1P-0.2L-DS .625 .906 .750 1.062 1.375 .177 1.000-20UNEF .573 .686
10-107020 20 1.2500-0.1P-0.2L-DS .625 .906 .750 1.156 1.500 .177 1.125-18NEF .573 .686
10-107022 22 1.3750-0.1P-0.2L-DS .625 .906 .750 1.250 1.625 .177 1.250-18NEF .573 .686
10-107024 24 1.5000-0.1P-0.2L-DS .625 .968 .812 1.375 1.750 .177 1.375-18NEF .573 .624
10-107028 28 1.7500-0.1P-0.2L-DS .625 .968 .812 1.562 2.000 .177 1.625-18NEF .573 .624
10-107032 32 2.0000-0.1P-0.2L-DS .625 1.031 .875 1.750 2.250 .209 1.875-16N .573 .561
10-107036 36 2.2500-0.1P-0.2L-DS .625 1.031 .875 1.938 2.500 .209 2.0625-16N .573 .561
10-107040 40 2.5000-0.1P-0.2L-DS .625 1.031 .875 2.188 2.750 .209 2.3125-16N .573 .561
10-107044 44 2.7500-0.1P-0.2L-DS .625 1.031 .875 2.375 3.000 .209 2.625-16UN .698 .801
7
S
S
M W
KZ
A
Thread
V
LEFT HAND
QWL
10-1071XX
cable connecting plug
All dimensions for reference only.
*For complete order number see page 4
Part
Number*
Shell
Size
A Thread
(plated)
Class 2A
K
±.015
M
+.016
–.000
S
±.020
V
Thread
Class 2A-LH
W
±.010
Z
Max
10-107110 10S .6250-0.05P-0.1L-DS .704 .453 .750 .500-28UNEF .400 .450
10-107112 12S .7500-0.1P-0.2L-DS .704 .453 .875 .625-24UNEF .400 .450
10-107113 12 .7500-0.1P-0.2L-DS .891 .641 .875 .625-24UNEF .588 .701
10-107114 14S .8750-0.1P-0.2L-DS .704 .453 1.000 .750-20UNEF .400 .450
10-107115 14 .8750-0.1P-0.2L-DS .891 .641 1.000 .750-20UNEF .588 .701
10-107116 16S 1.0000-0.1P-0.2L-DS .704 .453 1.094 .875-20UNEF .400 .450
10-107117 16 1.0000-0.1P-0.2L-DS .891 .641 1.094 .875-20UNEF .588 .701
10-107118 18 1.1250-0.1P-0.2L-DS .906 .656 1.281 1.000-20UNEF .573 .686
10-107120 20 1.2500-0.1P-0.2L-DS .906 .656 1.375 1.125-18UNEF .573 .686
10-107122 22 1.3750-0.1P-0.2L-DS .906 .656 1.500 1.250-18UNEF .573 .686
10-107124 24 1.5000-0.1P-0.2L-DS .968 .719 1.625 1.375-18UNEF .573 .624
10-107128 28 1.7500-0.1P-0.2L-DS .968 .719 1.875 1.625-18UNEF .573 .624
10-107132 32 2.0000-0.1P-0.2L-DS 1.031 .656 2.125 1.875-16UN .573 .561
10-107136 36 2.2500-0.1P-0.2L-DS 1.031 .656 2.375 2.0625-16UNS .573 .561
10-107140 40 2.5000-0.1P-0.2L-DS 1.031 .656 2.625 2.3125-16UNS .573 .561
10-107144 44 2.7500-0.1P-0.2L-DS 1.031 .656 3.000 2.625-16UN .698 .800
10-107148 48 3.0000-0.1P-0.2L-DS 1.031 .656 3.125 2.875-16UN .698 .800
8
SR
T
4 HOLES
S
R
B
MW
KZ
A
Y
QWL
10-1072XX
box mount receptacle
All dimensions for reference only.
*For complete order number see page 4
Part
Number*
Shell
Size
A
Thread
(Plated)
Class 2A
B
Min
Full
Thread
K
+.026
–.010
M
+.016
–.000
R
±.005
S
±.020
T
Dia
+.004
–.003
W
+.020
–.036
Y
Dia
±.010
Z
Max
10-107210 10S .6250-0.05P-0.1L-DS .391 .703 .562 .719 1.000 .150 .281 .469 .451
10-107212 12S .7500-0.1P-0.2L-DS .391 .703 .562 .812 1.094 .150 .281 .594 .451
10-107213 12 .7500-0.1P-0.2L-DS .625 .891 .750 .812 1.094 .150 .469 .594 .700
10-107214 14S .8750-0.1P-0.2L-DS .391 .703 .562 .906 1.188 .150 .281 .719 .451
10-107215 14 .8750-0.1P-0.2L-DS .625 .891 .750 .906 1.188 .150 .469 .719 .700
10-107216 16S 1.0000-0.1P-0.2L-DS .391 .703 .562 .969 1.281 .150 .281 .844 .451
10-107217 16 1.0000-0.1P-0.2L-DS .625 .891 .750 .969 1.281 .150 .469 .844 .700
10-107218 18 1.1250-0.1P-0.2L-DS .625 .906 .750 1.062 1.375 .177 .453 .969 .686
10-107220 20 1.2500-0.1P-0.2L-DS .625 .906 .750 1.156 1.500 .177 .453 1.125 .686
10-107222 22 1.3750-0.1P-0.2L-DS .625 .906 .750 1.250 1.625 .177 .453 1.250 .686
10-107224 24 1.5000-0.1P-0.2L-DS .625 1.000 .812 1.375 1.750 .177 .359 1.375 .585
10-107228 28 1.7500-0.1P-0.2L-DS .625 1.000 .812 1.562 2.000 .177 .359 1.594 .591
10-107232 32 2.0000-0.1P-0.2L-DS .625 1.063 .875 1.750 2.250 .209 .296 1.844 .528
10-107236 36 2.2500-0.1P-0.2L-DS .625 1.063 .875 1.938 2.500 .209 .296 2.031 .528
10-107240 40 2.5000-0.1P-0.2L-DS .625 1.063 .875 2.188 2.750 .209 .296 2.281 .528
10-107244 44 2.7500-0.1P-0.2L-DS .625 1.063 .875 2.375 3.000 .209 .546 2.562 .769
10-107248 48 3.0000-0.1P-0.2L-DS .625 1.063 .875 2.625 3.250 .209 .546 2.812 .769
9
QWL
10-1073XX
jam nut receptacle (wall mount)
All dimensions for reference only.
*For complete order number see page 4.
Part
Number*
Shell
Size
A Thread
Class 2A
B
±.010
E Thread
Class 2A
F
Hex
±.010
H
Panel
Thickness M
±.010
N
±.015
P
±.010
S
±.010
V
Thread
Class 2A-LH
W
±.010
Z
MaxMin Max
10-107310 10S .6250-0.5-0.1L-DS .385 .6875-24UNEF .875 .094 .227 .844 .469 .375 1.062 .500-28UNEF .344 .295
10-107312 12S .7500-0.1P-0.2L-DS .385 .875-20UNEF 1.062 .094 .200 .906 .469 .442 1.250 .625-24UNEF .344 .232
10-107313 12 .7500-0.1P-0.2L-DS .585 .875-20UNEF 1.062 .094 .188 1.094 .641 .442 1.250 .625-24UNEF .516 .483
10-107314 14S .8750-0.1P-0.2L-DS .385 1.000-20UNEF 1.250 .094 .200 .906 .469 .486 1.376 .750-20UNEF .344 .232
10-107315 14 .8750-0.1P-0.2L-DS .585 1.000-20UNEF 1.250 .094 .188 1.094 .641 .486 1.376 .750-20UNEF .516 .483
10-107316 16S 1.0000-0.1P-0.2L-DS .385 1.125-18UNEF 1.312 .094 .200 .906 .469 .530 1.500 .875-20UNEF .344 .232
10-107317 16 1.0000-0.1P-0.2L-DS .585 1.125-18UNEF 1.312 .094 .188 1.094 .641 .530 1.500 .875-20UNEF .516 .483
10-107318 18 1.1250-0.1P-0.2L-DS .585 1.250-18UNEF 1.500 .094 .203 1.109 .704 .623 1.750 1.000-20UNEF .516 .467
10-107320 20 1.2500-0.1P-0.2L-DS .585 1.375-18UNEF 1.562 .094 .203 1.109 .704 .663 1.875 1.125-18UNEF .516 .467
10-107322 22 1.3750-0.1P-0.2L-DS .585 1.500-18UNEF 1.750 .094 .203 1.109 .704 .707 2.000 1.250-18UNEF .516 .467
10-107324 24 1.5000-0.1P-0.2L-DS .585 1.625-18UNEF 1.875 .094 .265 1.172 .704 .751 2.125 1.375-18UNEF .516 .404
10-107328 28 1.7500-0.1P-0.2L-DS .585 1.875-16UNEF 2.125 .094 .265 1.172 .704 .840 2.375 1.625-18UNEF .516 .404
10-107332 32 2.0000-0.1P-0.2L-DS .585 2.125-16UNEF 2.375 .094 .203 1.172 .735 .928 2.625 1.875-16UN .516 .404
10-107336 36 2.2500-0.1P-0.2L-DS .585 2.375-16UN 2.625 .094 .203 1.172 .735 1.017 2.875 2.0625-16UN .516 .404
10-107340 40 2.5000-0.1P-0.2L-DS .585 2.625-16UN 2.875 .094 .203 1.172 .735 1.104 3.125 2.3125-16UN .516 .404
10-107344 44 2.7500-0.1P-0.2L-DS .585 2.875-16UN 3.125 .094 .265 1.234 .922 1.213 3.406 2.625-16UN .703 .593
10-107348 48 3.0000-0.1P-0.2L-DS .585 3.125-16UN 3.375 .094 .265 1.234 .922 1.299 3.656 2.875-16UN .703 .593
Shell
Size
K
Dia
+.005
–.000
G
±.003
U
±.005
10 .880 .518 .625
12, 13 1.005 .562 .688
14, 15 1.130 .606 .750
16, 17 1.255 .699 .875
18 1.380 .739 .938
20 1.505 .783 1.000
22 1.630 .830 1.062
24 1.880 .919 1.188
28 2.130 1.007 1.312
32 2.380 1.096 1.438
36 2.630 1.183 1.562
40 2.880 1.292 1.703
mounting dimensions
S
F
P
S
P
M
HZ
N
A
V
LEFT HAND
BEW
U
G
K
U
G
.125 ±.002
DIA. PIN
10
QWL
10-1074XX
thru bulkhead receptacle
All dimensions for reference only.
*For complete order number see page 4
Part
Number*
Shell
Size
A
Thread
Class 2A
B
Min
Full
Thread
C
Ref
G
Max
Bulkhead
Thickness
L
±.015
M
+.000
–.010
R
±.005
S
±.020
T
Dia
+.004
–.003
10-107410 10S .6250-0.05P-0.1L-DS .406 .141 .266 1.563 .711 .719 1.000 .120
10-107412 12S .7500-0.1P-0.2L-DS .406 .141 .266 1.563 .711 .812 1.094 .120
10-107413 12 .7500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 .812 1.094 .120
10-107414 14S .8750-0.1P-0.2L-DS .406 .141 .266 1.563 .711 .906 1.188 .120
10-107415 14 .8750-0.1P-0.2L-DS .625 .155 .312 2.125 .985 .906 1.188 .120
10-107416 16S 1.0000-0.1P-0.2L-DS .406 .141 .266 1.563 .711 .969 1.281 .120
10-107417 16 1.0000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 .969 1.281 .120
10-107418 18 1.1250-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.062 1.375 .120
10-107420 20 1.2500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.156 1.500 .120
10-107422 22 1.3750-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.250 1.625 .120
10-107424 24 1.5000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.375 1.750 .147
10-107428 28 1.7500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.562 2.000 .147
10-107432 32 2.0000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.750 2.250 .173
10-107436 36 2.2500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.938 2.500 .173
10-107440 40 2.5000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 2.188 2.750 .173
10-107444 44 2.7500-0.1P-0.2L-DS .625 .155 .438 2.375 1.110 2.375 3.000 .209
SR
T
4 HOLES
S
R
B
MM
G
L
C
ABA
11
ZJ
B
N
D
V
LEFT
HAND
GA
Q
QWL
10-1076XX
straight plug
All dimensions for reference only.
*For complete order number see page 4
**Applicable Tolerance is ±.033
***Applicable Tolerance is +.030
–.020
†Applicable Tolerance is ±.026
††Applicable Tolerance is +.013
–.023
Part
Number*
Shell
Size
A Thread
Class 2B
B
±.020
D
Dia
+.010
–.000
G
±.030
J
±.005
N
±.010
Q
Dia
Max
V Thread
(Plated)
Class 2A-LH
Z
Max
10-107610 10S .6250-0.05P-0.1L-DS .406 .735 .053 .531 .563 .882 .500-28UNEF .603
10-107612 12S .7500-0.1P-0.2L-DS .406 .859 .109 .531 .563 1.010 .625-24UNEF .603
10-107613 12 .7500-0.1P-0.2L-DS .578 .859 .077 .719 .750 1.010 .625-24UNEF .852
10-107614 14S .8750-0.1P-0.2L-DS .406 .985 .234 .531 .563 1.137 .750-20UNEF .603
10-107615 14 .8750-0.1P-0.2L-DS .578 .985 .077 .719 .750 1.137 .750-20UNEF .852
10-107616 16S 1.0000-0.1P-0.2L-DS .406 1.109 .234 .531 .563 1.264 .875-20UNEF .603
10-107617 16 1.0000-0.1P-0.2L-DS .578 1.109 .141 .719 .750 1.264 .875-20UNEF .852
10-107618 18 1.1250-0.1P-0.2L-DS .578 1.235 .266 .719 .750 1.455 1.000-20UNEF .852
10-107620 20 1.2500-0.1P-0.2L-DS .578 1.359 .266 .719 .750 1.551 1.1250-18UNEF .852
10-107622 22 1.3750-0.1P-0.2L-DS .578 1.485 .266 .719 .750 1.678 1.2500-18UNEF .852
10-107624 24 1.5000-0.1P-0.2L-DS .594 1.609 .266 .719 .812 1.806 1.375-18UNEF .852
10-107628 28 1.7500-0.1P-0.2L-DS .594 1.859 .266 .719 .812 2.060 1.625-18UNEF .852
10-107632 32 2.0000-0.1P-0.2L-DS .594 2.109 .266 .719 .875 2.315 1.875-16UN .852
10-107636 36 2.2500-0.1P-0.2L-DS .556† 2.359 .285** .719 .875 2.569 2.0625-16UNS .852
10-107640 40 2.5000-0.1P-0.2L-DS .556† 2.609 .285** .719 .875 2.824 2.3125-16UNS .852
10-107644 44 2.7500-0.1P-0.2L-DS .700†† 2.922 .141*** .719 1.000 3.142 2.625-16UN 1.103
10-107648 48 3.0000-0.1P-0.2L-DS .719 3.172 .141 .719 1.000 3.381 2.875-16UN 1.093
12
QWL
10-1077XX
flange mount plug
All dimensions for reference only.
*For complete order number see page 4
Part
Number*
Shell
Size
A Thread
Class 2B
C
±.005
J
±.005
N
±.020
R
±.005
S
±.020
T
Thread
Z
Max
10-107710 10S .6250-0.05P-0.1L-DS .125 .531 .438 .562 .781 4-40 NC .602
10-107712 12S .7500-0.1P-0.2L-DS .156 .531 .438 .812 1.062 4-40 NC .602
10-107713 12 .7500-0.1P-0.2L-DS .156 .719 .688 .812 1.062 4-40 NC .852
10-107714 14S .8750-0.1P-0.2L-DS .156 .531 .438 .812 1.062 4-40 NC .602
10-107715 14 .8750-0.1P-0.2L-DS .156 .719 .688 .812 1.062 4-40 NC .852
10-107716 16S 1.0000-0.1P-0.2L-DS .156 .531 .438 1.000 1.312 6-32 NC .602
10-107717 16 1.0000-0.1P-0.2L-DS .156 .719 .688 1.000 1.312 6-32 NC .852
10-107718 18 1.1250-0.1P-0.2L-DS .156 .719 .688 1.000 1.312 6-32 NC .852
10-107720 20 1.2500-0.1P-0.2L-DS .188 .719 .688 1.250 1.625 10-32 NF .852
10-107722 22 1.3750-0.1P-0.2L-DS .188 .719 .688 1.250 1.625 10-32 NF .852
10-107724 24 1.5000-0.1P-0.2L-DS .188 .719 .688 1.562 2.000 10-32 NF .852
10-107728 28 1.7500-0.1P-0.2L-DS .188 .719 .688 1.562 2.000 10-32 NF .852
10-107732 32 2.0000-0.1P-0.2L-DS .250 .719 .781 1.812 2.500 10-32 NF .852
10-107736 36 2.2500-0.1P-0.2L-DS .250 .719 .781 1.812 2.500 10-32 NF .852
10-107740 40 2.5000-0.1P-0.2L-DS .250 .719 .781 2.250 3.031 10-32 NF .852
10-107744 44 2.7500-0.1P-0.2L-DS .250 .719 1.000 2.375 3.031 10-32 NF .852
10-107748 48 3.0000-0.1P-0.2L-DS .250 .719 1.000 2.562 3.250 10-32 NF .852
T
4 HOLES
S
R
A
C
J
Z
N
SR
13
QWL
10-1079XX
jam nut receptacle (box mount)
All dimensions for reference only.
*For complete order number see page 4.
Part
Number*
Shell
Size
A Thread
Class 2A
B
±.010
C
±.005
E Thread
Class 2A
(Plated)
F
Hex
±.016
H
Panel Thickness M
±.010
P
±.010
S
±.010
Z
MaxMin Max
10-107910 10S .6250-0.05P-0.1L-DS .385 .125 .6875-24NEF .875 .094 .227 .844 .375 1.062 .295
10-107912 12S .7500-0.1P-0.2L-DS .385 .125 .875-20UNEF 1.062 .094 .200 .906 .442 1.250 .232
10-107913 12 .7500-0.1P-0.2L-DS .585 .125 .875-20UNEF 1.062 .094 .282 1.188 .442 1.250 .389
10-107914 14S .8750-0.1P-0.2L-DS .385 .125 1.000-20UNEF 1.250 .094 .200 .906 .486 1.376 .232
10-107915 14 .8750-0.1P-0.2L-DS .585 .125 1.000-20UNEF 1.250 .094 .282 1.188 .486 1.376 .389
10-107916 16S 1.0000-0.1P-0.2L-DS .385 .125 1.125-18NEF 1.312 .094 .200 .906 .530 1.500 .232
10-107917 16 1.0000-0.1P-0.2L-DS .585 .125 1.125-18NEF 1.312 .094 .282 1.188 .530 1.500 .389
10-107918 18 1.1250-0.1P-0.2L-DS .585 .188 1.250-18NEF 1.500 .094 .250 1.156 .623 1.750 .420
10-107920 20 1.2500-0.1P-0.2L-DS .585 .188 1.375-18NEF 1.562 .094 .250 1.156 .663 1.875 .420
10-107922 22 1.3750-0.1P-0.2L-DS .585 .188 1.500-18NEF 1.750 .094 .250 1.156 .707 2.000 .420
10-107924 24 1.5000-0.1P-0.2L-DS .585 .188 1.625-18NEF 1.875 .094 .312 1.219 .751 2.125 .357
10-107928 28 1.7500-0.1P-0.2L-DS .585 .188 1.875-16UN 2.125 .094 .312 1.219 .840 2.375 .357
10-107932 32 2.0000-0.1P-0.2L-DS .585 .219 2.125-16UN 2.375 .094 .282 1.250 .928 2.625 .326
10-107936 36 2.2500-0.1P-0.2L-DS .585 .219 2.375-16UN 2.625 .094 .282 1.250 1.017 2.875 .326
10-107940 40 2.5000-0.1P-0.2L-DS .585 .219 2.625-16UN 2.875 .094 .282 1.250 1.104 3.125 .326
10-107944 44 2.7500-0.1P-0.2L-DS .585 .219 2.875-16UN 3.125 .094 .422 1.390 1.213 3.406 .436
10-107948 48 3.0000-0.1P-0.2L-DS .585 .219 3.125-16UN 3.375 .094 .422 1.390 1.299 3.656 .436
Shell
Size
K Dia
+.005
–.000
G
±.003
U
±.005
10 .693 .451 .531
12, 13 .880 .518 .625
14, 15 1.005 .562 .688
16, 17 1.130 .606 .750
18 1.255 .699 .875
20 1.380 .739 .938
22 1.505 .783 1.000
24 1.630 .830 1.062
28 1.880 .919 1.188
32 2.130 1.007 1.312
36 2.380 1.096 1.438
40 2.630 1.183 1.562
44 2.880 1.292 1.703
48 3.130 1.378 1.828
mounting dimensions
U
G
K
U
G
.125 ±.002
DIA. PIN
S
F
P
S
P
M
H
C
Z
A
BE
14
QWL
insert arrangements - selection guide
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0 4 8 12 16
10S-2 A 1 1
12S-3 A 2 2
12S-4 D 1 1
12-5 D 1 1
14S-1 A 3 3
14S-2 Inst. 4 4
14S-4 D 1 1
14S-5 Inst. 5 5
14S-6 Inst. 6 6
14S-7 A 3 3
14S-9 A 2 2
14S-10 Inst. 4 4
14S-12 A 3 3
14-3 A 1 1
16S-1 A 7 7
16S-3 B 1 1
16S-4 D 2 2
16S-5 A 3 3
16S-6 A 3 3
16S-8 A 5 5
16-2 E 1 1
16-7 A 3 1 2
16-9 A 4 2 2
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
18-1 A/Inst. 10 10
18-3 D 2 2
18-4 D 4 4
18-5 D 3 2 1
18-6 D 1 1
18-7 B 1 1
18-8 A 8 1 7
18-9 Inst. 7 2 5
18-10 A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 1 3
18-14 A 2 1 1
18-15 A 4 4
18-16 C 1 1
18-17 Inst. 7 2 5
18-19 A 10 10
18-20 A 5 5
18-22 D 3 3
18-24 A/Inst. 10 10
18-29 A 5 5
18-30 A 5 5
18-31 A 5 5
20-2 D 1 1
20-3 D 3 3
20-4 D 4 4
20-6 D 3 3
20-7 D/A 8 8
20-8 Inst. 6 2 4
20-9 D/A 8 1 7
20-11 Inst. 13 13
20-12 A 2 1 1
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-20 A 4 1 3
20-21 A 9 1 8
20-22 A 6 3 3
20-23 A 2 2
20-24 A 4 2 2
20-25 Inst. 13 13
20-27 A 14 14
20-29 A 17 17
20-30 Inst. 13 13
20-33 A 11 11
22-1 D 2 2
22-2 D 3 3
22-4 A 4 2 2
22-5 D 6 2 4
22-6 D 3 2 1
22-7 E 1 1
22-8 E 2 2
22-9 E 3 3
22-10 E 4 4
22-11 B 2 2
22-12 D 5 2 3
22-13 D/A 5 4 1
22-14 A 19 19
22-15 E/A 6 5 1
22-16 A 9 3 6
22-17 D/A 9 1 8
22-18 D/A 8 8
22-19 A 14 14
22-20 A 9 9
22-21 A 3 1 2
22-22 A 4 4
22-23 D/A 8 8
22-24 D/A 6 2 4
22-27 D/A 9 1 8
22-28 A 7 7
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0481216
15
QWL
insert arrangements, cont.
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0481216
22-33 D/A 7 7
22-34 D 5 3 2
22-36 D/A 8 8
24-2 D 7 7
24-3 D 7 2 5
24-5 A 16 16
24-6 D/A 8 8
24-7 A 16 2 14
24-9 A 2 2
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-16 D/A 7 133
24-17 D 5 2 3
24-20 D 11 2 9
24-21 D 10 1 9
24-22 D 4 4
24-27 E 7 7
24-28 Inst. 24 24
28-1 D/A 9 3 6
28-2 D 14 2 12
28-3 E 3 3
28-4 E/D 9 2 7
28-5 D 5 2 1 2
28-6 D 3 3
28-7 D 2 2
28-8 E/D/A 12 2 10
28-9 D 12 6 6
28-10 D/A 7 223
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-16 A 20 20
28-17 B/D/A 15 15
28-18 C/D/A/Inst. 12 12
28-19 B/D/A 10 4 6
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
32-1 E/D 5 2 3
32-2 E 5 3 2
32-3 D 9 12 24
32-4 A/D 14 2 12
32-5 D 2 2
32-6 A 23 2 3 2 16
32-7 Inst./A 35 7 28
32-8 A 30 6 24
32-9 D 14 2 12
32-10 E/B/D/A 7 2 2 3
32-12 A/D 15 5 10
32-13 D 23 5 18
32-15 D 8 2 6
32-16 A 23 2 3 2 16
32-17 D 4 4
32-22 A 54 54
36-1 D 22 4 18
36-3 D 6 3 3
36-4 D/A 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
36-11 A 48 48
36-12 A 48 48
36-13 E/A 17 2 15
36-14 D 16 5 5 6
36-15 D/A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-20 A 34 2 2 30
36-52 A 52 52
40-1 D 30 6 24
40-9 A 47 1 22 24
40-56 A 85 85
48-62 D 85 85
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
0481216
16
QWL
special insert arrangements
Insert
Arrange
ment
Service
Rating
Total
Con-
tacts
Contact Size
4/0 2/0 0 4 8 12 16
Coax**
04812
14S-A7 A 7 7
16-59 A 4 4
20-26 A 19 19
20-51 A 3 3
20-57 A 7 7*
20-58 A 10 5 5
20-59 A 3 3*
20-66 A 6 5* 1
20-79 A/D 8 1 7
22-63 A 12 4 8
22-65 A/D 8 8*
22-70 A 13 8 5
22-80 A 3 3*
24-19 A 12 12
24-51 A 5 5
24-52 Hi Volt. 1 1
24-53 A 5 5
24-58 A 13 3 3 7
24-59 A 14 7 7
24-60 A 7 7*
24-65 A 15 11 4
24-66 D 7 7
24-67 Inst. 19 19
24-71 A 7 7*
24-75 A 7 7*
24-79 A 5 5
24-80 Inst. 23 23
24-84 A 19 1 18
24-96 Inst. 28 28
24-AJ A 25 25
28-51 A 12 12
28-59 A 17 7 10
28-66 A 16 2 14
28-72 Coax 3 3
28-74 A 16 7* 9
28-75 A 16 7* 9
28-79 A 16 7 9
28-82 D 6 2 4
28-84 A 9 9
28-AY A 9 4 5
32-25 A 25 25
32-31 A 31 31
32-48 Inst. 48 48
32-52 D 8 2 6
32-53 Inst./E 42 5 37
32-56 A 30 6* 24
32-57 Coax 8 6 2
32-58 Coax 4 4
32-60 A 23 15 8
32-62 Coax 23 2 1 2 16 2
32-64 Inst. 54 54
32-68 A 16 12 4
32-73 A 46 46
32-75 Coax 9 2 7
32-76 A 19 19
32-79 D 5 4 1
32-82 A 16 4 12
32-AF A 55 55
36-51 D 4 2 2
36-54 A 39 8 31
36-55 A 39 8* 31
36-59 A 53 3* 50
36-60 A 47 7* 40
36-64 Coax 4 4
36-65 Coax 4 4
36-71 A 53 3 50
36-73 Coax 7 7
36-74 A 44 43 1
36-75 A 48 48*
36-76 A 47 47
36-77 D 7 7
36-78 A 14 12 2
36-79 A 20 20
36-80 A 20 20*
36-83 Coax 7 7
36-85 A/D 35 35*
36-97 C 1 1
36-AF A 48 48
40-5 A 5 5
40-10 A 29 4 9 16
40-35 D 35 35
40-53 A 60 60
40-57 E 4 4
40-61 A 59 1 3 55
40-62 A 60 60
40-63 A 61 61*
40-64 Coax 36 3 20 13
40-66 Coax 4 4
40-67 A 11 1 10
40-68 A 21 21
40-70 A 61 61
40-72 A 11 1 10
40-73 A 61 61
40-74 A 6 1 4 1
40-75 E 5 4 1
40-80 A 11 10 1
40-81 A 62 62*
40-82 A 62 62
40-85 A 60 60*
40-86 E 4 4
40-87 D 7 7
40-AD A 8 4 4
40-AG A 38 38
40-AP E 2 2
40-AR Inst. 13 3 3 7
40-AS A 40 25 15
40-AT A 43 1 24 18
40-AU A 14 3 10 1
40-AV D 3 3
44-52 A 104 104
44-53 A 36 18 18
48-51 A 56 10 42 4
48-52 A 61 56 5
48-53 D 37 37
48-54 A 56 10 42 4
48-55 A 78 6 2 2 68
48-57 A 56 4 10 42
48-60 A 56 10 42 4
Insert
Arrange
ment
Service
Rating
Total
Con-
tacts
Contact Size
4/02/00481216
Coax**
04812
* Crimp contacts accommodate wire the same size as the contact as well as wire of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement drawings on pages 18-40 for application wire size.
** Coaxial cable data can be found on insert arrangement drawings, pages 38-48. For
further information on coaxial contacts and cable see catalog 12-130.
Consult Sidney, NY for alternate rotations not covered on page 17.
17
QWL
alternate positioning
To avoid cross-plugging problems in applications requir-
ing the use of more than one connector of the same
size and arrangement, alternate rotations are available
as indicated in the accompanying charts.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counter-clockwise the same number of degrees
in respect to the normal shell key.
Position W Position X Position Y Position Z
View looking into front face of pin insert or rear of socket insert.
The following insert arrangements have the same alter-
nate insert rotations for W, X, Y and Z, which are:
Degrees
WX YZ
80 110 250 280
16-7 20-22 22-29 24-17 28-16 32-13
18-5 22-6 22-33 24-20 28-17 32-22
18-9 22-12 22-34 24-21 28-19 32-AF
18-13 22-14 24-1 24-28 28-20 36-1
18-14 22-15 24-3 28-1 28-21 36-7
20-7 22-16 24-4 28-4 32-1 36-8
20-8 22-17 24-5 28-8 32-3 36-13
20-9 22-18 24-6 28-9 32-4 40-AR
20-12 22-19 24-7 28-10 32-6 40-AS
20-14 22-21 24-12 28-11 32-9 40-AT
20-16 22-24 24-14 28-14 32-10 40-AU
20-20 22-25 24-16 28-15 32-12
Insert
Arrangement
Degrees
WX Y Z
10SL-463–––
12S-3 70 145 215 290
14S-2 120 240
14S-5 110
14S-7 90 180 270
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270
16-11 35 110 250 325
16-13 35 110 250 325
16S-1 80 280
16S-4 35 110 250 325
16S-5 70 145 215 290
16S-6 90 180 270
16S-8 170 265
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 290
18-10 120 240
18-11 170 265
18-12 80 280
18-15 120 240
18-20 90 180 270
18-22 70 145 215 290
18-29 90 180 270
20-3 70 145 215 290
20-4 45 110 250
20-5 35 110 250 325
20-6 70 145 215 290
20-15 80 280
20-17 90 180 270
20-18 35 110 250 325
20-19 90 180 270
20-21 35 110 250 325
20-23 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 110 250
22-23 35 250
22-27 80 250 280
22-28 80 280
22-63 20–––
24-2 80 280
24-9 35 110 250 325
24-10 80 280
24-11 35 110 250 325
24-22 45 110 250
24-27 80 280
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
28-6 70 145 215 290
Insert
Arrangement
Degrees
WX Y Z
28-7 35 110 250 325
28-12 90 180 270
28-18 70 145 215 290
28-22 70 145 215 290
28-AY 45 110 250
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250
32-25 60 120
32-48 80
32-64 80 100 110 250
32-68 30
32-82 30
36-3 70 145 215 290
36-4 70 145 215 290
36-5 120 240
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270
36-15 60 125 245 305
36-AF 65
40-1 65 130 235 300
40-5 33 270
40-9 65 125 225 310
40-10 65 125 225 310
40-35 70 130 230 290
40-AD 45
40-AG 37 74 285 322
40-AP 35 110 250 325
40-AV 90 180 270
Insert
Arrangement
Degrees
WX Y Z
AB
AB
A
B
A
B
18
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 10S-2 12S-3 12S-4 12-5 14S-1 14S-2
Service Rating AAADAInst.
Number of Contacts 1 2 1 1 3 4
Contact Size 16 16 16 12 16 16
Insert Arrangement 14S-4 14S-5 14S-6 14S-7 14S-9 14S-10
Service Rating D Inst. Inst. A A Inst.
Number of Contacts 1 5 6 3 2 4
Contact Size 16 16 16 16 16 16
Insert Arrangement 14S-12 14-3 16S-1 16S-3 16S-4 16S-5
Service Rating AAABDA
Number of Contacts 3 1 7 1 2 3
Contact Size 16 8 16 16 16 16
Insert Arrangement 16S-6 16S-8 16-2 16-7 16-9
Service Rating A A E A A
Number of Contacts 3 5 1 1 2 2 2
Contact Size 16 16 12 8 16 12 16
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 14S-2
100° Rotation
of 14S-7
BA
A
BC
D
A
B
C
D
EFA
B
C
D
EA
B
C
AB
100˚
A
BC
D
100˚
A
B
C
A
B
CD
E
F
G
AB
A
BC
A
B
CA
B
C
D
E
AB
C
A
B
C
D
A
B
C
19
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 16-10 16-11 16-12 16-13 18-1 18-3
Service Rating AAAAB, C, F, G = A; Bal. = Inst.D
Number of Contacts 3 2 1 2* 10 2
Contact Size 12 12 4 12 16 12
Insert Arrangement 18-4 18-5 18-6 18-7 18-8 18-9
Service Rating D D D B A Inst.
Number of Contacts 4211 11725
Contact Size 16 12 16 4 8 12 16 12 16
Insert Arrangement 18-10 18-11 18-12 18-13 18-14 18-15
Service Rating A A A A A A
Number of Contacts 4 5 6 1 3 1 1 4**
Contact Size 12 12 16 8 12 4 16 12
Insert Arrangement 18-16 18-17 18-19 18-20 18-22 18-24
Service Rating C Inst. A A D B, C, F, G = A; Bal. = Inst.
Number of Contacts 1 2 5 10 5 3 10
Contact Size 12 12 16 16 16 16 16
CONTACT LEGEND 16 12 8 4 0
* A = Iron; B = Constantan
** A, C = Iron; B, D = Constantan
100° Rotation
of 18-9
250° Rotation
of 18-1
A
BC
A
B
C
D
B
CA
A
B
AB
A
B
C
D
E
F
G
H
I
J
AB
A
BC
D
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
A
BC
DA
BC
D
E
A
B
C
D
E
F
A
B
A
B
C
D
A
BC
DEF G
H
K
J
AB
C
D
E
AB
G
100˚
A
B
C
D
E
F
G
250˚
A
B
C
D
E
F
G
H
I
J
20
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 18-29 18-30 18-31 20-2 20-3 20-4
Service Rating A A A D D D
Number of Contacts 5 5 5 1 3 4
Contact Size 16 16 16 0 12 12
Insert Arrangement 20-6 20-7 20-8 20-9 20-11 20-12
Service Rating D A, B, H, G = D; C, D, E, F = A Inst. H = D; Bal. = A Inst. A
Number of Contacts 3 8 24 17 13 11
Contact Size 16 16 8 16 12 16 16 4 16
Insert Arrangement 20-14 20-15 20-16 20-17 20-18 20-19
Service Rating A A A A A A
Number of Contacts 2 3 7 2 7 5 1 3 6 3
Contact Size 8 12 12 12 16 12 16 12 16 8
CONTACT LEGEND 16 12 8 4 0
110° Rotation
of 18-20
260° Rotation
of 18-20
A
B
C
D
E
A
BC
A
B
D
C
A
BC
A
B
C
DE
F
G
H
A
B
C
D
EF
A
B
C
DE
F
GH
A
BC
D
E
F
GH
J
K
L
M
N
A
B
A
B
C
D
EA
B
CD
EG
F
A
B
C
D
EFG
H
I
A
BC
D
E
F
A
B
C
D
E
F
G
H
I
A
BC
110˚
AB
C
D
E
260˚
AB
C
D
E
21
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 20-20 20-21 20-22 20-23 20-24 20-25
Service Rating AAAA A Inst.
Number of Contacts 1 3 1 8 3 3 2 2 2 13
Contact Size 4 12 12 16 8 16 8 8 16 16
Insert Arrangement 20-27 20-29 20-30 20-33 22-1 22-2
Service Rating A A Inst. A D D
Number of Contacts 14 17 13 11 2 3
Contact Size 16 16 16 16 8 8
Insert Arrangement 22-4 22-5 22-6 22-7 22-8
Service Rating A D D E E
Number of Contacts 22 24 21 1 2
Contact Size 8 12 12 16 8 16 0 12
CONTACT LEGEND 16 12 8 4 0
250° Rotation
of 20-11
100° Rotation
of 20-11
A
B
C
D
A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
A
B
A
B
C
D
A
B
C
D
EF
G
H
I
J
K
L
M
N
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
A
B
C
D
E
F
K
H
JM
L
AB
A
BC
A
B
C
D
A
B
CD
E
F
A
B
C
AB
100˚
A
BC
D
E
F
GH
J
K
L
M
N
250˚
A
BC
D
E
F
GH
J
K
L
M
N
22
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 22-9 22-10 22-11 22-12 22-13
Service Rating E E B D E = D; A, B, C, D = A
Number of Contacts 3 4 2 2 3 4 1
Contact Size 12 16 16 8 16 12 16
Insert Arrangement 22-14 22-15 22-16 22-17 22-18
Service Rating A D = E; A, B, C, E, F = A A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A
Number of Contacts 19 5 1 3 6 1 8 8
Contact Size 16 12 16 12 16 12 16 16
Insert Arrangement 22-19 22-20 22-21 22-22 22-23
Service Rating A A A A H = D; Bal. = A
Number of Contacts 14 9 1 2 4 8
Contact Size 16 16 0 16 8 12
CONTACT LEGEND 16 12 8 4 0
A
BC
A
BC
D
AB
A
B
CD
E
A
B
C
D
E
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
A
B
E
F
C
D
A
B
C
D
E
FGH
J
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
J
KL
M
N
P
A
B
CDE
F
GH
J
A
B
C
A
BC
DA
B
C
D
E
F
G
H
23
A
B
C
D
E
F
G
H
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 22-24 22-27 22-28 22-33 22-36
Service Rating C, D, E = D; A, B, F = A J = D; Bal. = A A A, B, C, D = D; E, F, G = A H = D; Bal. = A*
Number of Contacts 2 4 1 8 7 7 8
Contact Size 12 16 8 16 12 16 12
Insert Arrangement 22-34 24-2 24-3 24-5 24-6
Service Rating D D D A A, G, H = D; Bal. = A
Number of Contacts 3 2 7 2 5 16 8
Contact Size 12 16 12 12 16 16 12
Insert Arrangement 24-7 24-9 24-10 24-11 24-12
Service Rating A A A A A
Number of Contacts 2 14 2 7 3 6 2 3
Contact Size 12 16 4 8 8 12 4 12
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
A
B
C
D
E
F
G
H
J
A
B
C
E
F
G
D
A
BC E
FG
D
A
BC
DE
A
B
C
D
E
F
G
A
B
C
E
F
G
D
AB
C
DE
FGH
JK
LMN
P
S
R
A
B
C
D
E
F
G
H
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
AB
A
B
CD
E
F
G
ABC
DEF
G
H
I
A
B
C
D
E
* A, C, E, G = Iron
B, D, F, H = Constantan
24
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 24-16 24-17 24-20 24-21 24-22
Service Rating A, B, F, G = D; C, D, E, = A D D D D
Number of Contacts 133 23 29 19 4
Contact Size 8 12 16 12 16 12 16 8 16 8
Insert Arrangement 24-27 24-28 28-1 28-2 28-3
Service Rating E Inst. A, J, E = D; Bal. = A D E
Number of Contacts 7 24 3 6 2 12 3
Contact Size 16 16 8 12 12 16 8
Insert Arrangement 28-4 28-5 28-6 28-7
Service Rating G, P, S = E; Bal. = D D D D
Number of Contacts 2 7 2 1 2 3 2
Contact Size 12 16 4 12 16 4 4
CONTACT LEGEND 16 12 8 4 0
AB
C
D
E
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
F
G
H
JK
A
BC
D
A
B
C
D
E
F
G
ABCD
EFGH J
KL
M
NPQ
RST
U
V
WX YZ
AB
C
D
E
F
G
H
J
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
BC
AB
CD
P
S
EFG
A
B
CD
E
A
BC
AB
A
B
C
D
E
F
G
25
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 28-8 28-9 28-10 28-11
Service Rating L, M = E; B = D; Bal. = A D G = D; Bal. = A A
Number of Contacts 2 10 6 6 2 2 3 4 18
Contact Size 12 16 12 16 4 8 12 12 16
Insert Arrangement 28-12 28-13 28-15 28-16
Service Rating A A A A
Number of Contacts 26 26 35 20
Contact Size 16 16 16 16
Insert Arrangement 28-17 28-18 28-19
Service Rating R = B; M, N, P = D; A to L = A M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst. H, M = B; A, B = D; Bal. = A
Number of Contacts 15 12 4 6
Contact Size 16 16 12 16
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 28-12
100˚
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
A
B
C
D
E
F
G
H
J
K
L
M
A
B
C
DE
F
G
H
J
K
LM
A
B
CD
E
F
GA
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
AB
CDEFG
HJKLM
PRST
N
W
XYZ
UV
abc
d
e
f
g
h
jk
m
l
AB
C
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VN
A
B
CD
E
F
G
HJK
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
M
AB
C
E
G
H
J
K
L
M
26
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 28-20 28-21 28-22 32-1
Service Rating A A D A = E; B, C, D, E = D
Number of Contacts 10 4 37 3 3 2 3
Contact Size 12 16 16 4 16 0 12
Insert Arrangement 32-2 32-3 32-4 32-5
Service Rating E D F, J, K, N = A; Bal. = D D
Number of Contacts 3 2 1 2 2 4 2 12 2
Contact Size 4 16 0 4 12 16 12 16 0
Insert Arrangement 32-6 32-7 32-8 32-9
Service Rating A A, B, h, j = Inst.; Bal. = A A D
Number of Contacts 2 3 2 16 7 28 6 24 2 12
Contact Size 4 8 12 16 12 16 12 16 4 16
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
H
J
K
L
M
N
P
A
BC
D
EFGHJ
KLMNPR
STUV WXZ
abcdef
ghjkm
nprs
A
B
C
DE
F
A
B
CD
E
A
B
C
D
E
A
B
C
DEF
G
H
J
A
B
C
D
E
F
G
H
J
K
L
M
N
O
A
B
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
AB
CD E F G
HI J K
LMN
27
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 32-10 32-12 32-13 32-15
Service Rating A, F = E; G = B; B, E = D; C, D = A C, D, E, F, G = A; Bal. = D D D
Number of Contacts 2 2 3 5 10 5 18 2 6
Contact Size 4 8 16 12 16 12 16 0 12
Insert Arrangement 32-16 32-17 32-22 36-1
Service Rating A D A D
Number of Contacts 2 3 2 16 4 54 4 18
Contact Size 4 8 12 16 4 16 12 16
Insert Arrangement 36-3 36-4 36-5 36-6
Service Rating D A = D; B, C = A A A
Number of Contacts 3 3 3 4 2 4
Contact Size 0 12 0 0 0 4
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 32-6
A
B
CD
E
F
G
AB
CD EFG
HJK
LM
OP
N
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
A
BC
DE
F
G
H
A
BC
D
AB
CDE
FGHJ
KLM
NO PR
STUVW
XYZa
bcdef
ghjk
mnpr
t
q
suv
xy
zAA
AB AC
AD AE
AF AG
w
ABC
DE F G H
IJK LMN
OP R S T
UVW
A
B
C
D
E
F
A
BC
A
B
C
D
A
B
C
D
E
F
100˚
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
28
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 36-7 36-8 36-9
Service Rating A A A
Number of Contacts 7 40 1 46 1 2 14 14
Contact Size 12 16 12 16 4 8 12 16
Insert Arrangement 36-10 36-11 36-12
Service Rating A A A
Number of Contacts 48 48 48
Contact Size 16 16 16
Insert Arrangement 36-13 36-14 36-15
Service Rating N, P, Q = E; Bal. = A D M = D; Bal. = A
Number of Contacts 2 15 5 5 6 35
Contact Size 12 16 8 12 16 16
CONTACT LEGEND 16 12 8 4 0
100° Rotation
of 36-10
110° Rotation
of 36-10
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WX
Y
Za
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
AB
CD E FG
HJK LMN
OPQR STU
VWXY Z a b c
de fg hj k
mnpr
tuvw
s
x
yz
q
A
B
C
D
EF
G
H
J
K
LM
NP
Q
RS
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
100˚
AB
CD EFG
HJK LMN
OPQ RSTU
VWX Y Z a b c
defghj k
mnpr
tuv w
s
x
yz
q
110˚
AB
CD EFG
HJ KLMN
OPQR STU
VWX Y Z abc
de f g h j k
mnp r
tu vw
s
x
yz
q
29
front face of pin insert or rear face of socket insert illustrated
QWL
contact arrangements
Insert Arrangement 36-16 36-17 36-18
Service Rating A A A
Number of Contacts 7 40 7 40 1 2 14 14
Contact Size 12 16 12 16 4 8 12 16
Insert Arrangement 36-20 36-52 40-1
Service Rating A A D
Number of Contacts 2 2 30 52 6 24
Contact Size 8 12 16 16 12 16
Insert Arrangement 40-9 40-56 48-62
Service Rating A A D
Number of Contacts 1 22 24 85 85
Contact Size 8 12 16 16 16
CONTACT LEGEND 16 12 8 4 0
110° Rotation
of 36-7
100° Rotation
of 36-9
100° Rotation
of 36-7
AB
CD E FG
HJK LMN
PRSTUVW
XYZ abc
defg
hj
km
ABC
D
EFHJ
K
LM N P R S
TUV WXY Z
abcdfghi
jkmn p r
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
ABC
DE FG
HI JKL
MNO PRS
TU V WX
YZ ab
cde
AB
CDE
F
GHIJ
KL
MN O PQ
RST
UVWXYZa
bcd
efgh
i
jk
lm
n
p
r
tu
s
o
q
ABCD
EF H J K LM
NPRSTUVW
XYZab
cdfg
hijkmnp r
tuvw
s
xyz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36 37 38
39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57
58 59 60 61 62 63 64 65 66
67 68 69 70 71 72 73 74
75 76 77 78 79 80 81
82 83 84 85
100˚
AB
CDE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
110˚
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
100˚
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
30
A
B
C
D
E
FH
J
K
L
M
N
Special
contact arrangements
Requirements for more complex circuits prompted
Amphenol to provide inserts not covered by the MS draw-
ings. Illustrated here and on the following pages are
insert layouts which have from one contact (high tension)
to the 104 contact insert in shell size 44.
Many of these special inserts are also available in alter-
nate keyway arrangements. Please contact Amphenol,
Sidney, NY for additional information on special circuit
application requirements.
front face of pin insert or rear face of socket insert illustrated
Insert Arrangement 14S-A7 16-59 20-26 20-51 20-57 20-58
Service Rating A A A A A A
Number of Contacts 7 4 19 3* 7* 5 5
Contact Size 16 12 16 8 12 for #14 or 16 wire 12 16
Insert Arrangement 20-59 20-66 20-79 22-63 22-65 22-70
Service Rating A A H = D; Bal. = A A H = D; Bal. = A A
Number of Contacts 3* 1 5 7* 1* 4 8 8* 8 5
Contact Size 8 for #10 or 12 wire 16 12 for #10 wire 16 12 for #16 wire 12 16 12 for #14 or 16 wire 12 16
Insert Arrangement 22-80 24-19 24-51 24-52 24-53 24-58
Service Rating A A A Hi-Volt A A
Number of Contacts 3* 12 5* 1 5* 3 3 7
Contact Size 8 for #10 or 12 wire 16 B, E for AN #10 or 12 wire 12 8 8 12 16
A, C, D for AN #8 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
A
F
E
D
C
B
G
A
B
CA
BC
DE
F
H
J
K
L
A
B
CD
EG
F
A
B
C
A
BC
D
E
F
A
B
C
D
E
F
G
H
A
BC
E
F
H
J
K
L
M
N
D
A
B
C
DE
F
H
J
K
L
M
N
P
A
BC
A
B
C
D
EA
B
C
D
E
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
C
D
E
F
G
H
AB
CD
A
B
C
D
E
F
G
HSR
JT
V
P
K
L
M
UN
31
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 24-59 24-60 24-65 24-66 24-67
Service Rating A A A D Inst.
Number of Contacts 7 7 7* 11 4 7 19
Contact Size 12 16 8 for #10 or 12 wire 12 16 12 12
Insert Arrangement 24-71 24-75 24-79 24-80 24-84
Service Rating A A A Inst. A
Number of Contacts 2* 5* 5 2 5 23 1 18
Contact Size 8 8 for #10 or 12 wire 8 8 for #16 wire 8 16 12 12 (Coax) RG-188/U
or RG-174/U
Insert Arrangement 24-96 24-AJ 28-51 28-59
Service Rating Inst. A A A
Number of Contacts 28 25 12 7 10
Contact Size 16 16 12 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
H
J
K
LM
N
P
R
A
B
CD
E
F
G
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
C
D
E
ABCD
EFGHJ
KLMNPQ
RSTU
V
WX Z
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
A
B
C
D
E
F
H
J
K
L
M
N
AB C D
EFH
JK
LMN
PR S TU
ABCD
EFGHJ
KLMNPQ
RS
T
UV
WXZ
Y
a
32
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 28-66 28-72 28-74 28-75 28-79
Service Rating A A A A
Number of Contacts 2 14 3 9* 4* 3* 9* 7* 7 9
Contact Size 8 12 4 (Coax) RG-59A/U 16 8 8 for #10 wire 16 8 for #10 wire 8 16
or RG-62A/U (S, T, R)
Insert Arrangement 28-82 28-84 28-AY 32-25
Service Rating D A A A
Number of Contacts 2 4 9 4 5 25
Contact Size 8 12 8 4 16 12
Insert Arrangement 32-31 32-48 32-52 32-53
Service Rating A Inst. D t, u = E; Bal. = Inst.
Number of Contacts 31 48 6 2 5 37
Contact Size 16 16 12 0 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
90° CW Rotation
of 32-15
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
A
BC
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
12
3
45
6
A
B
C
DE
F
G
H
I
A
BC
DE F
GH
J
13
12
11
10
9
876
5
4
3
2
1
23
19 22
21
20
15
18
17
16
14
24
25
90˚ A
BC
DE
F
G
H
ABCDE
F
H
J
K
L
MNP
R
S
T
U
V
W
X
Y
Z
abc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27
28
29
30 31
AB
CDEFH
JKLMNP
RSTUVWX
YZ
abcd f g
hi jkmn p
qrstuv
wxyzAA
BB CC
33
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 32-56 32-57 32-58 32-60
Service Rating A ** A
Number of Contacts 24 6 6 2 4 15 8
Contact Size 16 12 for #10 wire 12 0 (Coax) RG-71/U 4 (Coax) RG-161/U 16 8 (Coax) RG-124/U
or RG-179/U
Insert Arrangement 32-62 32-64 32-68
Service Rating ** Inst. A
Number of Contacts 2 1 2 16 2 54 12 4
Contact Size 4 8 12 16 8 (Coax) RG-124/U 16 16 4 (Coax) RG-58C/U
Insert Arrangement 32-73 32-75 32-76 32-79
Service Rating A 8, 9 = D A D
Number of Contacts 46 2 7 19 4 1
Contact Size 16 12 8 (Coax) RG-180B/U 12 4 8
** Consult Amphenol, Sidney, NY for service rating of power contacts. CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
BC
DE
F
G
H
A
BC
D
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcde
f
ghjk
mnpr
tu
v
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AB
CDE
FG H
J
KLM
NP
QR
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
1
2
3
4
5
67
89
12 3
4567
8 9 10 11 12
13 14 15 16
17 18 19
A
BC
D
E
34
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 32-82 32-AF 36-51 36-54
Service Rating A A D A
Number of Contacts 4 12 55 2 2 8 31
Contact Size 4 16 16 0 4 8 16
Insert Arrangement 36-55 36-59 36-60 36-64
Service Rating A A **
Number of Contacts 31 8 50 3 40 7 4
Contact Size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire 0 (Coax) RG-11/U,
RG-12/U or RG-13/U
Insert Arrangement 36-65 36-71 36-73 36-74
Service Rating A A
Number of Contacts 4 3 50 7 43 1
Contact Size 0 (Coax) RG-59/U, RG-62/U 12 16 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/U
or RG-71/U
** Consult Amphenol, Sidney, NY for service rating of power contacts. CONTACT LEGEND 16 12 8 4 0
AB
CDE
FG H
J
KLM
NP
QR
AB
CDE
FGHJ
KLM
NO PR
STUVW
XY Za
bcdef
ghjk
n
mpr
tuv
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AH
A
B
CD
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
B
C
D
A
B
C
D
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
A
B
C
D
E
F
G
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
35
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 36-75 36-76 36-77 36-78
Service Rating AADA
Number of Contacts 48 47 7 2 12
Contact Size 16 for #14 wire 16 4 16 8
Insert Arrangement 36-79 36-80 36-83 36-85
Service Rating A A M = D; Bal. = A
Number of Contacts 20 20 7 35
Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U 16 for #12 wire
Insert Arrangement 36-97 36-AF 40-5
Service Rating C A A
Number of Contacts 1 48 5
Contact Size 4/0 16 0
CONTACT LEGEND 16 12 8 4 0 4/0
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
12
3
45
67 8
910 1112
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
A
B
C
D
E
F
G
1
2
3
4
56
7
8
9
10
11
12
13
14
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
AB
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
m
n
p
r
t
s
q
u
v
w
x
y
z
A
B
GC
N
36
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 40-10 40-35 40-53
Service Rating A D A
Number of Contacts 4 9 16 35 60
Contact Size 4 8 16 12 16
Insert Arrangement 40-57 40-61 40-62
Service Rating E A A
Number of Contacts 4 1 3 55 60
Contact Size 0 8 12 16 16
Insert Arrangement 40-63 40-64 40-66
Service Rating A
Number of Contacts 61 3 20 13 4
Contact Size 16 for #14 wire 12 16 8 (Coax) RG-124/U 0 (Coax) RG-63B/U
CONTACT LEGEND 16 12 8 4 0
A
B
CD
E
H
K
G
J
F
L
Q
P
N
I
M
RS
O
V
Y
Z
W
U
X
b
a
c
T
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
3132
33
34
35
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
12
345 67
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
50 51 52 53 54 55 56
57
58
59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3335
36
37
38
39
40
41
42
43
44
45
46
47
34
48
49
50
51
52
53
54
55
56
57
58
59
60
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
A
B
C
D
E
F
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
k
m
n
p
q
1
2
3
4
37
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 40-67 40-68 40-70
Service Rating A A A
Number of Contacts 1 10 21 61
Contact Size 16 4 (Coax) RG-59/U 8 16
Insert Arrangement 40-72 40-73 40-74
Service Rating A A A
Number of Contacts 1 10 61 1 1 4
Contact Size 16 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U
or RG-214/U
Insert Arrangement 40-75 40-80 40-81
Service Rating E A A
Number of Contacts 1 4 1 10 62
Contact Size 12 0 16 4 16 for #14 wire
CONTACT LEGEND 16 12 8 4 0
1
2345
678910
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
58 59 60 61
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
1
2
34
5
6
1
2
3
4
5
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
AB
CDE
FH J
KL
M
AB
CDE
FH J
KL
M
AB
CDE
FH J
KL
M
38
A
B
H
GC
D
E
F
AB
A
BC
D
E
F
G
H
J
K
L
M
N
1
2
3
45
6
7
89
10
11
12
13
14
15
16
17
18
19
20
21
2223
24
25
26
27
28
29
30
31 32
33
34 35
36
37
38
39
40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2122
23
24
25
26 27 28 29
30 31 32 33
35 36 37 38
40 41 42 43
34 39
A
B
C
D
E
F
G
H
J
K
L
M
N
PAB
C
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 40-82 40-85 40-86 40-87
Service Rating A A D
Number of Contacts 62 60 4 7
Contact Size 16 16 for #14 wire 0(Coax) RG-115A/U 4
Insert Arrangement 40-AD 40-AG 40-AP 40-AR
Service Rating A A E Inst.
Number of Contacts 4 4 38 2 7 3 3
Contact Size 8 0 12 4/0 12 4 0
Insert Arrangement 40-AS 40-AT 40-AU 40-AV
Service Rating A A A D
Number of Contacts 15 25 24 18 1 3 10 1 3
Contact Size 16 12 12 16 8 4 8 16 2/0
CONTACT LEGEND 16 12 8 4 0 2/0 4/0
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
1
2
34
5
6
7
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 44-52 44-53 48-51
Service Rating A A A
Number of Contacts 104 18 18 42 10 4
Contact Size 16 16 8 (Coax) RG-124/U 16 8 0 (Coax) RG-41/U
Insert Arrangement 48-52 48-53
Service Rating A D
Number of Contacts 56 5 37
Contact Size 16 0 (Coax) RG-41/U 12
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
km
n
p
q
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
A
B
C
D
E
ABCD
EFGH J
KLMNPR
ST UVWX Z
abcdef
gh j km
npr s
AB
CDEFH JK
LMNP RSTU
VWXYZ a b
cd
fghi jkmn
p
rtuvwsx
yz
q
BA
BB BC BD BE BF BH BJ BK BL BM
BN BP BR BS BT BU BV BW BX
BY BZ CA CB CC CD CE CF
CH CJ CK CL CM CN CP
CR CS
AA AB
AC AD AE AF AH AJ AK AL AM
AN
AP AR AS AT AU AV AW AX AY AZ
40
front face of pin insert or rear face of socket insert illustrated
Special
contact arrangements
Insert Arrangement 48-54 48-55
Service Rating A A
Number of Contacts 42 10 4 68 2 2 6
Contact Size 16 8 0 (Coax) RG-59/U 16 12 8 4
Insert Arrangement 48-57 48-60
Service Rating A A
Number of Contacts 42 10 4 42 10 4
Contact Size 16 8 0 16 8 0 (Coax) RG-214/U
CONTACT LEGEND 16 12 8 4 0
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
1
23
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36 37 38
39
40 41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67 68
69 70
71
72
73 74 75
76
77
78
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
41
QWL – accessories
cabling information
The Amphenol® QWL series of electrical connectors has
been designed with the problems of multi-conductor
cable users in mind. Two of these problems, namely
water proofing and strain relief, are solved by the radial
inward compression of an internal neoprene gland in the
various cable accessories shown on the following pages.
For additional strain relief beyond that provided by the
gland, both cable grips and bar clamps are available.
Since the glands close down from .094” to .145”
(depending on shell size), the optimum condition for
cable users is to select a gland with an I.D. only slightly
larger than the maximum O.D. of the cable. The inside
diameter of the accessory housing determines the maxi-
mum diameter of the cable as shown in the tabulation
below. Smaller sizes than those shown in each shell size
can be accommodated by smaller compression glands.
Different cable manufacturers use different constructions
and cable lays in manufacturing multi-conductor cable.
The specific cabling manufacturing specification should
be known by the customer in detail in order to properly
figure each QWL application. This knowledge can save
many individual wire crossovers in any given run of cable.
Crossovers add materially to the cable diameter without a
cable accessory. In those cases where diameter buildup
is impossible to avoid, special cable accessories with
longer barrels are available.
How to order information is covered in detail on pages 4
and 5. In selecting the base number below, care should
be used, as some of the cable accessories are provided
with protection cap attachment rings, while others are
provided with the Kellems strain relief grip as shown. If a
type or cable accommodation size is not found herein
that fulfills your application, please contact Amphenol,
Sidney, NY.
All dimensions for reference only.
Shell
Size
QWL Connector
Accessory Thd.
Approx. Work Length (Internal) Minimum Housing
Inner Diameter
Maximum Cable
Outer DiameterShort Long
10 .500-28 .250 .359 .359
12 .625-24 .375 .484 .484
14 .750-20 .401 .609 .609
16 .875-20 .500 .734 .734
18 1.000-20 1.120 .859 .859
20 1.125-18 1.370 .984 .984
22 1.250-18 1.370 1.109 1.109
24 1.375-18 1.370 1.234 1.234
28 1.625-18 1.370 5.000 1.427 1.427
32 1.875-16 1.370 6.000 1.708 1.708
36 2.062-16 1.370 5.000 1.895 1.895
40 2.312-16 1.370 6.000 2.130 2.130
44 2.625-16 2.375 2.375
48 2.875-16 2.218 6.000 2.630 2.630
42
10-101332
Short barrel with grip
10-101333
Short barrel without grip
10-130380
Short barrel length with attachment
ring & strain relief bars
10-101335
Short barrel with attachment ring
10-101335
Short barrel with attachment ring
QWL – cable accessories
10-101334
Short barrel with grip & attachment ring
10-113637
Long barrel with attachment ring and grip
43
Type I Straight
Type II Step Down
Type III Step Up
H
B
D
LEFT HAND
GC
A
F
E
SECTION A-A
J
A
H
B
D
LEFT HAND
G
F
C
E
J
H
B
D
LEFT HAND
GC
A
F
E
SECTION A-A
J
A
QWL – accessories
10-130380
cable sealing adapter (with clamp bars)
44
QWL – accessories
10-130380
cable sealing adapter (with clamp bars)
All dimensions are for reference only.
*For complete order number see pages 4 and 5.
Part
Number*
Used
With
Shell
Size
Cable Range
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
Max
F
+.010
–.020
G
Dia.
+.010
–.020
H
Max.
J
Max. Type
Max.
Dia.
Min.
Dia.
10-130380-141 14S .460 .366 .750 .812 .750-20UNEF 1.125 1.782 .938 3.229 1.062 I
10-130380-142 14S .438 .344 .875 .938 .750-20UNEF 1.125 2.126 .938 3.573 1.125 III
10-130380-143 14S .375 .306 .875 .938 .750-20UNEF 1.125 2.126 .938 3.573 1.125 III
10-130380-161 16S .530 .436 1.000 1.062 .875-20UNEF 1.250 2.282 1.062 3.854 1.375 III
10-130380-162 16S .605 .511 1.000 1.062 .875-20UNEF 1.250 2.282 1.062 3.854 1.375 III
10-130380-171 16 .500 .406 .875 .938 .875-20UNEF 1.125 2.215 1.062 3.834 1.125 I
10-130380-181 18 .828 .715 1.188 1.250 1.000-20UNEF 1.250 3.032 1.188 4.776 1.688 III
10-130380-182 18 .699 .605 1.062 1.125 1.000-20UNEF 1.250 2.933 1.188 4.677 1.562 III
10-130380-183 18 .500 .406 .875 1.094 1.000-20UNEF 1.125 2.485 1.188 4.104 1.125 II
10-130380-184 18 .562 .449 1.188 1.250 1.000-20UNEF 1.250 3.032 1.188 4.776 1.688 III
10-130380-185 18 .750 .637 1.312 1.000 1.000-20UNEF 1.250 3.063 1.188 4.607 1.812 III
10-130380-186 18 .530 .436 1.000 1.062 1.000-20UNEF 1.250 2.621 1.188 4.365 1.375 I
10-130380-201 20 .625 .531 1.062 1.125 1.125-18UNEF 1.250 2.933 1.312 4.677 1.562 I
10-130380-202 20 .605 .511 1.000 1.125 1.125-18UNEF 1.250 2.631 1.312 4.365 1.375 II
10-130380-203 20 .628 .715 1.188 1.125 1.125-18UNEF 1.250 2.996 1.312 4.740 1.688 III
10-130380-204 20 .720 .626 1.062 1.125 1.125-18UNEF 1.250 2.933 1.312 4.677 1.562 I
10-130380-205 20 .900 .787 1.312 1.250 1.125-18UNEF 1.250 3.062 1.312 4.807 1.812 III
10-130380-206 20 .625 .531 1.062 1.125 1.125-18UNEF 1.250 2.933 1.312 4.677 1.562 I
10-130380-207 20 .750 .637 1.312 1.250 1.125-18UNEF 1.250 3.063 1.312 4.807 1.812 III
10-130380-221 22 .790 .696 1.062 1.250 1.250-18UNEF 1.250 2.933 1.438 4.677 1.562 II
10-130380-222 22 .720 .626 1.062 1.250 1.250-18UNEF 1.250 2.933 1.438 4.677 1.562 II
10-130380-223 22 1.130 1.005 1.780 1.375 1.250-18UNEF 1.500 3.266 1.438 5.250 2.469 III
10-130380-224 22 .680 .567 1.312 1.375 1.250-18UNEF 1.250 3.059 1.438 4.803 1.812 III
10-130380-242 24 .900 .787 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I
10-130380-243 24 1.180 1.055 1.780 1.812 1.375-18UNEF 1.500 3.204 1.562 5.198 2.469 III
10-130380-244 24 .680 .567 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I
10-130380-245 24 .630 .517 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I
10-130380-246 24 1.000 .875 1.546 1.625 1.375-18UNEF 1.500 3.121 1.562 5.115 2.125 III
10-130380-247 24 .805 .692 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I
10-130380-281 28 1.310 1.185 1.780 1.875 1.625-18UNEF 1.500 3.184 1.812 5.178 2.469 III
10-130380-282 28 .970 .857 1.312 1.625 1.625-18UNEF 1.250 3.059 1.812 4.803 1.812 II
10-130380-283 28 .880 .755 1.546 1.625 1.625-18UNEF 1.500 3.121 1.812 5.115 2.125 I
10-130380-284 28 1.427 1.320 2.000 1.875 1.625-18UNEF 1.500 3.184 1.812 5.178 2.625 III
10-130380-321 32 .970 .875 1.312 1.875 1.875-16UN 1.250 3.059 2.062 4.803 1.812 II
10-130380-322 32 1.230 1.105 1.780 1.875 1.875-16UN 1.500 3.184 2.062 5.178 2.469 I
10-130380-323 32 1.328 1.240 1.780 1.875 1.875-16UN 1.500 3.184 2.062 5.178 2.469 I
10-130380-324 32 .750 .637 1.312 1.875 1.875-16UN 1.250 3.059 2.062 4.803 1.812 II
10-130380-325 32 1.055 .958 1.546 1.875 1.875-16UN 1.500 3.121 2.062 5.115 2.125 II
10-130380-326 32 1.375 1.250 2.000 2.062 1.875-16UN 1.500 3.246 2.062 5.240 2.625 III
10-130380-361 36 1.310 1.185 1.780 2.062 2.0625-16UN 1.500 3.184 2.312 5.178 2.469 II
10-130380-362 36 1.900 1.775 2.438 2.312 2.0625-16UN 1.625 3.500 2.312 5.619 3.171 III
10-130380-363 36 1.530 1.406 2.000 2.062 2.0625-16UN 1.500 3.246 2.312 5.240 2.625 I
10-130380-364 36 1.445 1.320 2.000 2.062 2.0625-16UN 1.500 3.246 2.312 5.240 2.625 I
10-130380-365 36 .805 .692 1.312 2.062 2.0625-16UN 1.250 3.059 2.312 4.803 1.812 II
10-130380-366 36 .603 .511 1.000 2.000 2.0625-16UN 1.250 2.875 2.312 4.619 1.375 II
10-130380-367 36 1.000 .875 1.546 2.062 2.0625-16UN 1.500 3.121 2.312 5.115 2.125 II
10-130380-401 40 1.730 1.605 2.438 2.500 2.3125-16UN 1.625 3.469 2.562 5.588 3.171 III
10-130380-402 40 1.310 1.185 1.780 2.312 2.3125-16UN 1.500 3.184 2.562 5.178 2.469 II
10-130380-403 40 1.180 1.055 1.780 2.312 2.3125-16UN 1.500 3.184 2.562 5.178 2.469 II
10-130380-404 40 1.109 .984 1.546 2.312 2.3125-16UN 1.500 3.121 2.562 5.115 2.125 II
10-130380-441 44 1.900 1.775 2.438 2.750 2.625-16UN 1.625 4.281 2.875 6.588 3.171 II
45
QWL – accessories
10-10133X
cable sealing adapter
Type I Straight
Type II Step Down
Type III Step Up
*Wire grip dimensions (K) apply to 10-101332 and 10-101334 assemblies only.
H
K*
OPTIONAL
BD
LEFT HAND
GC
A
F
E
SECTION A-A
A
H
BD
LEFT HAND
G
F
C
E
K*
OPTIONAL
BD
LEFT HAND
GC
A
F
SECTION A-A
A
H
E
K*
OPTIONAL
46
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
*For complete order number see pages 4 and 5.
Par t
Number*
Used
With
Shell
Size
Cable Range
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
Max.
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx. Type
Max.
Dia.
Min.
Dia.
10-10133X-121 12S .281 .219 .750 .812 .6250-24NEF .500 1.938 .812 2.750 2.844 III
10-10133X-122 12S .500 .406 1.062 1.000 .6250-24NEF .562 2.875 .812 3.750 4.688 III
10-10133X-123 12S .405 .316 1.000 .812 .6250-24NEF .562 2.548 .812 3.422 3.688 III
10-10133X-141 14S .337 .281 .750 .812 .7500-20UNEF .500 1.782 .938 2.594 3.344 I
10-10133X-142 14S .222 .160 .625 .812 .7500-20UNEF .562 1.782 .938 2.532 2.406 II
10-10133X-143 14S .281 .219 .750 .812 .7500-20UNEF .500 1.782 .938 2.594 2.844 I
10-10133X-144 14S .530 .441 1.000 .812 .7500-20UNEF .562 2.719 .938 3.594 4.688 III
10-10133X-145 14S .463 .406 .875 .938 .7500-20UNEF .500 2.126 .938 2.938 4.344 III
10-10133X-146 14S .405 .316 1.000 .812 .7500-20UNEF .562 2.719 .938 3.594 3.688 III
10-10133X-151 14 .405 .316 1.000 .812 .7500-20UNEF .562 2.719 .938 3.765 3.688 III
10-10133X-161 16S .463 .406 .875 .938 .8750-20UNEF .500 1.844 1.062 2.656 4.344 I
10-10133X-162 16S .589 .511 1.000 1.062 .8750-20UNEF .562 2.282 1.062 3.156 5.188 III
10-10133X-163 16S .625 .580 1.062 1.125 .8750-20UNEF .562 2.933 1.062 3.807 6.188 III
10-10133X-164 16S .405 .316 1.000 1.062 .8750-20UNEF .562 2.282 1.062 3.156 3.688 III
10-10133X-165 16S .530 .441 1.000 1.062 .8750-20UNEF .562 2.282 1.062 3.156 4.688 III
10-10133X-166 16S .699 .605 1.062 1.125 .8750-20UNEF .562 2.933 1.062 3.807 6.188 III
10-10133X-167 16S .281 .219 .750 .938 .8750-20UNEF .500 1.844 1.062 2.656 2.844 II
10-10133X-171 16 .589 .511 1.000 1.062 .8750-20UNEF .562 2.621 1.062 3.667 5.188 III
10-10133X-172 16 .438 .400 .875 .938 .8750-20UNEF .500 2.215 1.062 3.199 4.344 I
10-10133X-173 16 .625 .580 1.062 1.125 .8750-20UNEF .562 2.933 1.062 3.979 6.188 III
10-10133X-174 16 .530 .441 1.000 1.062 .8750-20UNEF .562 2.621 1.062 3.667 4.688 III
10-10133X-175 16 .405 .316 1.000 1.062 .8750-20UNEF .562 2.621 1.062 3.667 3.688 III
10-10133X-181 18 .589 .511 1.000 1.062 1.0000-20UNEF .562 2.621 1.188 3.667 5.188 I
10-10133X-182 18 .625 .580 1.062 1.125 1.0000-20UNEF .562 2.933 1.188 3.979 6.188 III
10-10133X-183 18 .530 .441 1.000 1.062 1.0000-20UNEF .562 2.621 1.188 3.667 4.688 I
10-10133X-184 18 .699 .605 1.062 1.125 1.0000-20UNEF .562 2.933 1.188 3.979 6.188 III
10-10133X-185 18 .405 .316 1.000 1.062 1.0000-20UNEF .562 2.621 1.188 3.667 3.688 I
10-10133X-186 18 .455 .361 1.062 1.125 1.0000-20UNEF .562 2.933 1.188 3.979 4.188 III
10-10133X-187 18 .750 .637 1.250 1.000 1.0000-20UNEF .562 3.063 1.188 4.109 6.688 III
10-10133X-188 18 .172 .078 .750 .938 1.0000-20UNEF .500 2.407 1.188 3.391 2.844 II
10-10133X-190 18 .805 .692 1.250 1.000 1.0000-20UNEF .562 3.063 1.188 4.109 6.688 III
10-10133X-201 20 .625 .580 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 6.188 I
10-10133X-202 20 .699 .605 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 6.188 I
10-10133X-203 20 .500 .406 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 4.688 I
10-10133X-204 20 .337 .281 .750 1.125 1.1250-18NEF .500 2.438 1.312 3.422 3.344 II
10-10133X-205 20 .828 .715 1.125 1.250 1.1250-18NEF .547 2.996 1.312 4.042 6.688 III
10-10133X-206 20 .375 .312 .875 1.125 1.1250-18NEF .500 2.469 1.312 3.453 3.844 II
10-10133X-207 20 .281 .219 .750 1.125 1.1250-18NEF .500 2.438 1.312 3.422 2.844 II
10-10133X-208 20 .455 .361 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 4.188 I
10-10133X-209 20 .589 .511 1.000 1.125 1.1250-18NEF .562 2.621 1.312 3.667 5.188 II
10-10133X-210 20 .530 .441 1.000 1.125 1.1250-18NEF .562 2.621 1.312 3.667 4.688 II
10-10133X-211 20 .900 .791 1.250 1.250 1.1250-18NEF .562 3.063 1.312 4.109 7.188 III
47
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
*For complete order number see pages 4 and 5.
Par t
Number*
Used
With
Shell
Size
Cable Range
B
+.000
–.010
C
+.000
–.010
D Thread
Class 2B-LH
E
Free
±.010
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx. Type
Max.
Dia.
Min.
Dia.
10-10133X-221 22 .699 .605 1.062 1.250 1.2500-18NEF .562 2.933 1.438 3.979 6.188 II
10-10133X-222 22 .750 .637 1.250 1.375 1.2500-18NEF .562 3.059 1.438 4.105 6.688 III
10-10133X-223 22 .445 .367 1.062 1.250 1.2500-18NEF .562 2.933 1.438 3.979 4.188 II
10-10133X-224 22 1.000 .875 1.500 1.375 1.2500-18NEF .562 3.121 1.438 4.167 7.188 III
10-10133X-225 22 .828 .715 1.125 1.250 1.2500-18NEF .594 2.996 1.438 4.072 6.688 I
10-10133X-226 22 .900 .791 1.250 1.375 1.2500-18NEF .562 3.059 1.438 4.105 7.188 III
10-10133X-227 22 .562 .453 1.125 1.250 1.2500-18NEF .594 2.996 1.438 4.074 5.188 I
10-10133X-228 22 1.101 .984 1.500 1.375 1.2500-18NEF .562 3.121 1.438 4.167 7.688 III
10-10133X-229 22 .589 .511 1.000 1.250 1.2500-18NEF .562 2.750 1.438 3.796 5.188 II
10-10133X-231 22 1.055 .958 1.500 1.375 1.2500-18NEF .562 3.121 1.438 4.167 7.688 III
10-10133X-241 24 1.000 .875 1.500 1.625 1.3750-18NEF .562 3.121 1.562 4.167 7.188 III
10-10133X-242 24 .562 .453 1.125 1.406 1.3750-18NEF .562 2.996 1.562 4.042 5.188 II
10-10133X-243 24 .750 .637 1.250 1.375 1.3750-18NEF .562 3.059 1.562 4.105 6.688 I
10-10133X-244 24 .900 .791 1.250 1.375 1.3750-18NEF .562 3.059 1.562 4.105 7.188 I
10-10133X-245 24 1.101 .984 1.500 1.625 1.3750-18NEF .562 3.121 1.562 4.167 7.688 III
10-10133X-246 24 .405 .316 1.000 1.375 1.3750-18NEF .562 2.750 1.562 3.796 3.688 II
10-10133X-247 24 .828 .715 1.125 1.406 1.3750-18NEF .562 2.996 1.562 4.042 6.688 II
10-10133X-248 24 .805 .692 1.250 1.375 1.3750-18NEF .562 3.059 1.562 4.105 6.688 I
10-10133X-249 24 1.130 1.005 1.750 1.812 1.3750-18NEF .562 3.204 1.562 4.250 7.188 III
10-10133X-281 28 1.055 .958 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 7.688 I
10-10133X-282 28 .900 .791 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 7.188 II
10-10133X-283 28 1.000 .875 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 7.188 I
10-10133X-284 28 .630 .535 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 5.688 II
10-10133X-285 28 .750 .637 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 6.688 II
10-10133X-286 28 1.180 1.099 1.750 1.875 1.6250-18NEF .562 3.184 1.812 4.230 8.188 III
10-10133X-287 28 1.101 .984 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 7.688 I
10-10133X-288 28 1.310 1.200 1.750 1.875 1.6250-18NEF .562 3.184 1.812 4.230 8.688 III
10-10133X-289 28 1.230 1.105 1.750 1.875 1.6250-18NEF .562 3.184 1.812 4.230 8.188 III
10-10133X-290 28 .880 .755 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 6.688 I
10-10133X-291 28 .957 .857 1.250 1.625 1.6250-18NEF .547 3.059 1.812 4.090 7.188 II
10-10133X-292 28 .828 .715 1.125 1.625 1.6250-18NEF .562 2.954 1.812 4.000 6.688 II
10-10133X-293 28 1.375 1.250 2.000 1.875 1.6250-18NEF .562 3.184 1.812 4.230 9.688 III
10-10133X-294 28 1.445 1.320 2.000 1.875 1.6250-18NEF .562 3.184 1.812 4.230 9.688 III
10-10133X-295 28 .805 .692 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 6.688 II
10-10133X-321 32 .880 .755 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 6.688 II
10-10133X-322 32 1.101 .984 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 7.688 II
10-10133X-323 32 .750 .637 1.250 1.875 1.8750-16N .562 3.059 2.062 4.105 6.688 II
10-10133X-324 32 1.445 1.320 2.000 2.062 1.8750-16N .672 3.246 2.062 4.292 9.688 III
10-10133X-325 32 1.180 1.099 1.750 1.875 1.8750-16N .562 3.184 2.062 4.230 8.188 I
10-10133X-326 32 .375 .312 .875 1.875 1.8750-16N .500 2.766 2.062 3.750 3.844 II
10-10133X-327 32 .957 .857 1.250 1.875 1.8750-16N .562 3.059 2.062 4.105 7.188 II
10-10133X-328 32 1.230 1.105 1.750 1.875 1.8750-16N .562 3.184 2.062 4.230 8.188 I
10-10133X-329 32 1.530 1.406 2.000 2.062 1.8750-16N .562 3.246 2.062 4.292 10.688 III
10-10133X-330 32 1.000 .875 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 7.188 II
10-10133X-331 32 1.375 1.250 2.000 2.062 1.8750-16N .562 3.246 2.062 4.292 9.688 III
10-10133X-332 32 1.310 1.200 1.750 1.875 1.8750-16N .562 3.184 2.062 4.230 8.688 I
10-10133X-333 32 .580 x
.825 (Oval) 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 6.688 II
10-10133X-334 32 .500 x
.705 (Oval) 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 6.688 II
48
QWL – accessories
10-10133X
cable sealing adapter
All dimensions are for reference only.
*For complete order number see pages 4 and 5.
Par t
Number*
Used
With
Shell
Size
Cable Range
B
+.000
–.010
C
+.000
–.010
D Thread
Class 2B-LH
E
Free
±.035
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx. Type
Max.
Dia.
Min.
Dia.
10-10133X-335 32 .530 .441 1.000 1.625 1.8750-16N .562 2.875 2.062 3.921 4.688 II
10-10133X-336 32 .680 .567 1.250 1.875 1.8750-16N .562 3.059 2.062 4.105 6.688 II
10-10133X-337 32 .463 .406 .875 1.875 1.8750-16N .500 2.766 2.062 3.750 4.344 II
10-10133X-361 36 1.055 .958 1.500 2.062 2.0625-16N .562 3.121 2.312 4.167 7.688 II
10-10133X-362 36 1.445 1.320 2.000 2.062 2.0625-16N .562 3.246 2.312 4.292 9.688 I
10-10133X-363 36 1.530 1.406 2.000 2.062 2.0625-16N .562 3.246 2.312 4.292 10.688 I
10-10133X-364 36 1.230 1.105 1.750 2.062 2.0625-16N .562 3.184 2.312 4.230 8.188 II
10-10133X-365 36 .750 .637 1.250 2.062 2.0625-16N .562 3.059 2.312 4.105 6.688 II
10-10133X-366 36 .880 .755 1.500 2.062 2.0625-16N .562 3.121 2.312 4.167 6.688 II
10-10133X-367 36 1.656 1.531 2.250 2.312 2.0625-16N .562 3.308 2.312 4.354 12.688 III
10-10133X-368 36 1.101 .984 1.500 2.062 2.0625-16N .562 3.121 2.312 4.167 7.688 II
10-10133X-369 36 .957 .857 1.250 2.062 2.0625-16N .672 3.059 2.312 4.090 7.188 II
10-10133X-370 36 1.900 1.775 2.438 2.312 2.0625-16N .500 3.500 2.312 4.656 13.688 III
10-10133X-371 36 .375 .312 .875 2.062 2.0625-16N .500 2.813 2.312 3.797 3.844 II
10-10133X-372 36 1.825 1.700 2.438 2.312 2.0625-16N .672 3.500 2.312 4.656 13.688 III
10-10133X-373 36 1.375 1.250 2.000 2.062 2.0625-16N .562 3.246 2.312 4.292 9.688 I
10-10133X-374 36 1.562 1.437 2.250 2.312 2.0625-16N .562 3.308 2.312 4.354 11.188 III
10-10133X-375 36 1.730 1.605 2.438 2.312 2.0625-16N .672 3.500 2.312 4.656 13.688 III
10-10133X-376 36 .530 .441 1.000 1.875 2.0625-16N .562 2.875 2.312 3.921 4.688 II
10-10133X-377 36 1.130 1.005 1.750 2.062 2.0625-16N .562 3.184 2.312 4.230 7.188 II
10-10133X-378 36 1.180 1.055 1.750 2.062 2.0625-16N .562 3.184 2.312 4.230 8.188 II
10-10133X-379 36 1.595 1.470 2.250 2.312 2.0625-16N .562 3.308 2.312 4.354 11.688 III
10-10133X-401 40 1.310 1.200 1.750 2.312 2.3125-16N .562 3.184 2.562 4.230 8.688 II
10-10133X-402 40 1.656 1.531 2.250 2.312 2.3125-16N .562 3.308 2.562 4.354 12.688 I
10-10133X-403 40 1.101 .984 1.500 2.312 2.3125-16N .438 3.121 2.562 4.167 7.688 II
10-10133X-404 40 1.562 1.437 2.250 2.312 2.3125-16N .562 3.308 2.562 4.354 11.188 I
10-10133X-405 40 1.375 1.250 2.000 2.312 2.3125-16N .562 3.246 2.562 4.292 9.688 II
10-10133X-406 40 1.180 1.099 1.750 2.312 2.3125-16N .562 3.184 2.562 4.230 8.188 II
10-10133X-407 40 1.900 1.775 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III
10-10133X-408 40 1.730 1.605 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III
10-10133X-409 40 1.825 1.700 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III
10-10133X-410 40 1.984 1.859 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III
10-10133X-411 40 1.445 1.320 2.000 2.312 2.3125-16N .562 3.246 2.562 4.292 9.688 II
10-10133X-412 40 2.062 1.937 2.750 2.500 2.3125-16N .672 3.500 2.562 4.656 14.188 III
10-10133X-413 40 2.100 1.955 2.750 2.500 2.3125-16N .672 3.500 2.562 4.656 14.188 III
10-10133X-414 40 2.145 2.000 2.750 2.500 2.3125-16N .672 3.500 2.562 4.656 14.188 III
10-10133X-415 40 .957 .857 1.250 2.125 2.3125-16N .562 3.063 2.562 4.109 7.188 II
10-10133X-416 40 1.230 1.103 1.750 2.312 2.3125-16N .562 3.184 2.562 4.230 8.188 II
10-10133X-417 40 1.055 .958 1.500 2.312 2.3125-16N .562 3.121 2.562 4.167 7.688 II
10-10133X-418 40 .630 .567 1.250 2.250 2.3125-16UN .562 3.063 2.562 4.109 6.688 II
10-10133X-441 44 2.170 2.025 2.750 2.625 2.6250-16UN .672 3.609 2.875 4.953 17.188 III
10-10133X-442 44 2.145 2.000 2.750 2.625 2.6250-16UN .672 3.547 2.875 4.891 14.188 III
10-10133X-443 44 2.250 2.105 2.750 2.625 2.6250-16UN .672 3.609 2.875 4.953 17.188 III
10-10133X-445 44 1.130 1.005 1.750 2.625 2.6250-16UN .562 3.969 2.875 5.203 7.188 II
10-10133X-446 44 1.109 .984 1.500 2.500 2.6250-16UN .562 3.905 2.875 5.140 7.688 II
10-10133X-449 44 1.445 1.320 2.000 2.562 2.6250-16UN .562 4.031 2.875 5.265 9.688 II
10-10133X-481 48 1.900 1.775 2.438 2.812 2.8750-16N .562 3.203 3.125 4.547 13.688 II
10-10133X-482 48 2.000 1.867 2.750 2.969 2.8750-16N .672 4.281 3.125 5.625 14.188 II
10-10133X-483 48 2.250 2.105 2.750 2.750 2.8750-16N .672 4.406 3.125 5.750 17.188 I
10-10133X-484 48 2.170 2.025 2.750 2.750 2.8750-16N .672 4.406 3.125 5.750 17.188 I
49
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
Type I Straight
Type II Step Down
Type III Step Up
H
K
BD
LEFT HAND
GC
A
F
E
SECTION A-A
A
H
D
LEFT HAND
G
F
E
K*
Optional
B
C
BD
LEFT HAND
GC
A
F
SECTION A-A
A
H
E
K*
Optional
50
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
*For complete order number see pages 4 and 5.
Par t
Number*
Used
With
Shell
Size
Cable Range
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
±.035
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx. Type
Max.
Dia.
Min.
Dia.
10-113637-141 14S .337 .281 .750 .750 .7500-20UNEF .500 5.282 .938 6.094 3.344 I
10-113637-142 14S .405 .316 1.000 1.000 .7500-20UNEF .562 5.500 .938 6.374 3.688 III
10-113637-143 14S .530 .441 1.000 1.000 .7500-20UNEF .562 5.500 .938 6.374 4.688 III
10-113637-144 14S .463 .406 .875 .938 .7500-20UNEF .500 5.344 .938 6.156 4.344 III
10-113637-171 16 .699 .605 1.062 1.125 .8750-20UNEF .562 5.563 1.062 6.609 6.188 III
10-113637-172 16 .530 .441 1.000 1.000 .8750-20UNEF .562 5.500 1.062 6.546 4.688 III
10-113637-181 18 .828 .715 1.125 1.250 1.0000-20UNEF .562 6.657 1.188 7.703 6.688 III
10-113637-201 20 .750 .637 1.250 1.312 1.1250-18NEF .562 6.000 1.312 7.046 6.688 III
10-113637-202 20 .984 .875 1.500 1.625 1.1250-18NEF .562 6.750 1.312 7.796 7.188 III
10-113637-203 20 .900 .791 1.250 1.312 1.1250-18UNEF .562 6.000 1.312 7.046 7.188 III
10-113637-221 22 .750 .637 1.250 1.312 1.2500-18NEF .562 6.000 1.438 7.046 6.688 III
10-113637-222 22 .699 .605 1.062 1.312 1.2500-18NEF .562 5.063 1.438 6.109 6.188 II
10-113637-223 22 1.055 .958 1.500 1.625 1.2500-18NEF .562 6.750 1.438 7.796 7.688 III
10-113637-224 22 1.828 .715 1.125 1.250 1.2500-18NEF .562 5.625 1.438 6.671 6.688 I
10-113637-225 22 .589 .511 1.000 1.250 1.2500-18NEF .562 5.500 1.438 6.546 5.188 II
10-113637-241 24 .957 .857 1.250 1.375 1.3750-18NEF .562 6.000 1.562 7.046 7.188 I
10-113637-242 24 .750 .637 1.250 1.375 1.3750-18NEF .562 6.000 1.562 7.046 6.688 I
10-113637-243 24 1.101 .984 1.500 1.625 1.3750-18NEF .562 6.750 1.562 7.796 7.688 III
10-113637-244 24 1.000 .875 1.500 1.625 1.3750-18NEF .562 6.750 1.562 7.796 7.188 III
10-113637-245 24 1.180 1.055 1.750 1.812 1.3750-18NEF .562 6.813 1.562 7.859 8.188 III
10-113637-246 24 .805 .692 1.250 1.375 1.3750-18NEF .562 6.000 1.562 7.046 6.688 I
10-113637-281 28 1.000 .875 1.500 1.562 1.6250-18NEF .562 6.750 1.812 7.796 7.188 I
10-113637-282 28 1.900 1.775 2.438 2.438 1.6250-18NEF .672 8.125 1.812 9.281 13.688 III
10-113637-283 28 1.375 1.250 2.000 2.000 1.6250-18NEF .562 6.875 1.812 7.921 9.688 III
10-113637-284 28 .750 .637 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 6.688 II
10-113637-285 28 1.101 .984 1.500 1.562 1.6250-18NEF .562 6.750 1.812 7.796 7.688 I
10-113637-286 28 1.130 1.005 1.750 1.875 1.6250-18NEF .562 6.813 1.812 7.859 7.188 III
10-113637-287 28 .900 .791 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 7.188 II
10-113637-288 28 1.427 1.320 2.000 2.000 1.6250-18NEF .562 6.875 1.812 7.921 9.688 III
10-113637-289 28 1.180 1.099 1.750 1.875 1.6250-18NEF .562 6.812 1.812 7.858 8.188 III
10-113637-290 28 1.055 .958 1.500 1.562 1.6250-18NEF .562 6.750 1.812 7.796 7.688 I
10-113637-291 28 .957 .857 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 7.188 II
10-113637-292 28 1.310 1.200 1.750 1.875 1.6250-18NEF .562 6.813 1.812 7.859 8.688 III
10-113637-293 28 .530 .441 1.000 1.625 1.6250-18NEF .562 6.500 1.812 7.546 4.688 II
10-113637-294 28 1.230 1.105 1.750 1.875 1.6250-18NEF .562 6.813 1.812 7.859 8.188 III
10-113637-295 28 .630 .535 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 5.688 II
51
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
*For complete order number see pages 4 and 5.
Par t
Number*
Used
With
Shell
Size
Cable Range
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
±.035
F
+.010
–.020
G
Dia.
+.010
–.020
H
±.045
K
Free
Approx. Type
Max.
Dia.
Min.
Dia.
10-113637-321 32 .828 .715 1.125 1.844 1.8750-16N .594 7.625 2.062 8.703 6.688 II
10-113637-322 32 1.310 1.200 1.750 1.812 1.8750-16UN .562 6.812 2.062 7.858 8.688 I
10-113637-323 32 1.130 1.005 1.750 1.812 1.8750-16UN .562 6.812 2.062 7.858 7.188 I
10-113637-324 32 1.375 1.250 2.000 2.000 1.8750-16UN .562 7.875 2.062 8.921 9.688 III
10-113637-325 32 1.445 1.320 2.000 2.000 1.8750-16UN .562 7.875 2.062 8.921 9.688 III
10-113637-326 32 1.180 1.099 1.750 1.812 1.8750-16UN .562 6.812 2.062 7.858 8.188 I
10-113637-327 32 1.656 1.531 2.250 2.250 1.8750-16UN .562 7.141 2.062 8.187 12.688 III
10-113637-328 32 .970 .857 1.250 1.844 1.8750-16UN .562 6.688 2.062 7.734 7.188 II
10-113637-361 36 1.375 1.250 2.000 2.000 2.0625-16N .562 6.875 2.312 7.921 9.688 I
10-113637-362 36 1.000 .875 1.500 2.000 2.0625-16N .562 6.750 2.312 7.796 7.188 II
10-113637-363 36 1.920 x
1.140 oval
1.920 x
1.140 oval 2.438 2.438 2.0625-16N .672 8.125 2.312 9.281 13.688 III
10-113637-364 36 1.230 1.105 1.750 2.000 2.0625-16N .562 6.813 2.312 7.859 8.188 II
10-113637-365 36 1.562 1.437 2.250 2.250 2.0625-16N .562 6.938 2.312 7.984 11.188 III
10-113637-366 36 1.656 1.531 2.250 2.250 2.0625-16N .562 6.938 2.312 7.984 11.188 III
10-113637-367 36 1.445 1.320 2.000 2.000 2.0625-16N .562 6.875 2.312 7.921 9.688 I
10-113637-368 36 1.825 1.700 2.438 2.500 2.0625-16N .672 9.125 2.312 9.281 13.688 III
10-113637-369 36 1.895 1.775 2.438 2.438 2.0625-16N .672 8.125 2.312 9.281 13.688 III
10-113637-370 36 1.730 1.605 2.438 2.438 2.0625-16N .672 8.125 2.312 9.281 13.688 III
10-113637-371 36 1.310 1.200 1.750 2.000 2.0625-16N .562 6.813 2.312 7.859 8.688 II
10-113637-401 40 1.906 1.761 2.750 2.438 2.3125-16N .672 8.125 2.562 9.281 14.188 III
10-113637-402 40 1.940 1.815 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III
10-113637-403 40 1.900 1.775 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III
10-113637-404 40 1.825 1.700 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III
10-113637-405 40 1.310 1.200 1.750 2.250 2.3125-16N .562 7.813 2.562 8.859 8.688 II
10-113637-406 40 1.180 1.099 1.750 2.250 2.3125-16N .562 7.813 2.562 8.859 8.188 II
10-113637-407 40 1.230 1.105 1.750 2.250 2.3125-16N .562 7.813 2.562 8.859 8.188 II
10-113637-408 40 1.656 1.531 2.250 2.250 2.3125-16N .562 7.938 2.562 8.984 11.188 I
10-113637-410 40 2.145 2.000 2.750 2.438 2.3125-16N .672 8.125 2.562 9.281 14.188 III
10-113637-411 40 1.984 1.859 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III
10-113637-412 40 1.940 1.815 2.438 2.438 2.3125-16N .672 11.125 2.562 12.281 13.688 III
10-113637-413 40 1.984 1.859 2.438 2.438 2.3125-16N .672 11.125 2.562 12.281 13.688 III
10-113637-414 40 2.100 1.955 2.750 2.625 2.3125-16N .672 12.000 2.562 13.156 14.188 III
10-113637-415 40 1.562 1.437 2.250 2.250 2.3125-16N .562 7.938 2.562 8.984 11.188 I
10-113637-416 40 1.445 1.320 2.000 2.312 2.3125-16N .562 6.875 2.562 7.921 9.688 II
10-113637-417 40 1.375 1.250 2.000 2.312 2.3125-16N .562 6.875 2.562 7.921 9.688 II
52
QWL – accessories
10-113637
cable sealing adapter (with woven strain relief)
All dimensions are for reference only.
*For complete order number see pages 4 and 5.
Par t
Number*
Used
With
Shell
Size
Cable Range
B
+.000
–.010
C
+.010
–.000
D Thread
Class 2B-LH
E
Free
±.035
F
+.010
–.020
G
Dia
+.010
–.020
H
±.045
K
Free†
Approx. Type
Max
Dia
Min
Dia
10-113637-441 44 2.100 1.955 2.750 2.750 2.6250-16UN .672 8.125 2.875 9.469 14.188 III
10-113637-442 44 2.250 2.105 2.750 2.875 2.6250-16UN .672 8.188 2.875 9.531 17.188 III
10-113637-443 44 2.000 1.867 2.750 2.750 2.6250-16UN .672 8.125 2.875 9.469 14.188 III
10-113637-444 44 1.500 1.375 2.250 2.500 2.6250-16UN .562 7.938 2.875 9.171 11.188 II
10-113637-445 44 1.730 1.605 2.438 2.750 2.6250-16UN .672 8.125 2.875 9.469 13.688 II
10-113637-446 44 .750 .637 1.250 2.625 2.6250-16UN .562 6.688 2.875 7.921 6.688 II
10-113637-447 44 1.825 1.700 2.438 2.750 2.6250-16UN .672 8.125 2.875 9.469 13.688 II
10-113637-448 44 2.145 2.000 2.750 2.750 2.6250-16UN .672 8.125 2.875 9.469 14.188 III
10-113637-449 44 2.170 2.025 2.750 2.875 2.6250-16UN .672 8.188 2.875 9.532 17.188 III
10-113637-450 44 1.375 1.250 2.000 2.625 2.6250-16UN .562 7.875 2.875 9.109 9.688 II
10-113637-481 48 2.250 2.105 2.750 2.750 2.8750-16N .672 8.188 3.125 9.532 14.688 I
10-113637-482 48 2.500 2.355 2.875 2.875 2.8750-16N .672 8.188 3.125 9.532 18.188 III
10-113637-483 48 2.375 2.230 2.875 2.875 2.8750-16N .672 8.188 3.125 9.532 18.188 III
10-113637-484 48 2.145 2.000 2.750 2.875 2.8750-16N .672 8.125 3.125 9.469 14.188 II
10-113637-485 48 2.000 1.867 2.750 2.875 2.8750-16N .672 8.125 3.125 9.469 14.188 II
10-113637-486 48 1.656 1.531 2.250 2.750 2.8750-16UN .562 7.937 3.125 9.171 12.688 II
53
QWL – accessories
adapter, cable clamp
10-113196-XX
adapter
10-749XX-( )
cable clamp
This cable clamp is designed to be used with specific QWL insert arrangements. The locations,
quantity, and sizes of holes in the clamp grommet must correspond to those in the connector for an
effective moisture seal without wire crossing. Contact Amphenol, Sidney, NY, for grommet avail-
ability. Example: 10-107618-4P must use 10-74918-4 clamp.
V
E
L
D
A
C
F
Y
WZ
54
B
DIA
45
A
DIA
C
.135 +.030
–.025
˚
QWL – accessories
adapter, cable clamp, sealing plugs
All dimensions for reference only.
*For complete order number see page 5. Clamp 10-749XX-( ) has a bright cadmium finish. An olive drab cadmium plate finish is available
by order number 71-749XX-( ). To complete clamp order number, add connector insert arrangement number.
Shell
Size
Adapter
Part
Number*
Clamp
Part
Number*
A Thread
Class 2A
C
+.010
–.000
D
Dia.
+.010
–.020
E
Dia.
+.010
–.020
F
±.010
L
±.010
V Thread
Class 2B-LH
W
Min.
Thd.
Engage
Y
Max.
Z
Max.
10S 10-113196-10 10-74910-( ) .500-28UNEF .203 .922 .625 .562 1.234 .500-28UNEF .519 .807 .529
12S 10-113196-12 10-74912-( ) .625-24NEF .328 .969 .750 .688 1.281 .625-24NEF .519 .901 .524
12 10-113196-13 10-74913-( ) .625-24NEF .328 .954 .750 .688 1.438 .625-24NEF .519 .901 .524
14S 10-113196-14 10-74914-( ) .750-20UNEF .453 1.094 .875 .812 1.406 .750-20UNEF .519 1.026 .524
14 10-113196-15 10-74915-( ) .750-20UNEF .453 .954 .875 .812 1.438 .750-20UNEF .519 1.026 .524
16S 10-113196-16 10-74916-( ) .875-20UNEF .578 1.094 1.000 .938 1.406 .875-20UNEF .519 1.119 .524
16 10-113196-17 10-74917-( ) .875-20UNEF .578 1.016 1.000 .938 1.500 .875-20UNEF .519 1.119 .524
18 10-113196-18 10-74918-( ) 1.000-20UNEF .676 1.141 1.188 1.062 1.625 1.000-20UNEF .519 1.229 .556
20 10-113196-20 10-74920-( ) 1.1875-18NEF .801 1.094 1.312 1.250 1.578 1.125-18NEF .505 1.479 .666
22 10-113196-22 10-74922-( ) 1.1875-18NEF .906 1.141 1.438 1.250 1.625 1.250-18NEF .519 1.479 .666
24 10-113196-24 10-74924-( ) 1.4375-18NEF 1.016 1.094 1.562 1.500 1.578 1.375-18NEF .519 1.666 .666
28 10-113196-28 10-74928-( ) 1.4375-18NEF 1.130 1.235 1.812 1.500 1.719 1.625-18NEF .519 1.666 .666
32 10-113196-32 10-74932-( ) 1.7500-18NS 1.438 1.204 2.062 1.875 1.688 1.875-16N .519 2.135 .805
36 10-113196-36 10-74936-( ) 2.000-18NS 1.678 1.266 2.250 2.125 1.750 2.0625-16N .738 2.260 .805
40 10-113196-40 10-74940-( ) 2.2500-16UN 1.914 1.266 2.500 2.375 1.750 2.3125-16N .738 2.510 .805
SEALING PLUG
MS27488-XX
10-405996-XX
Order No.
Contact
Size
MS
Number
Wire
Size
Color
Code
B
±.005
C
±.010
A
Dia.
±.010
10-405996-16 16 27488-16 20-16 Blue .133 .564* .083
10-405996-12 12 27488-12 14-12 Yellow .171 .564* .121
10-405996-8 8 27488-8 10-8 White .315 .470 .185
10-405996-4 4 27488-4 4-6 Blue .415 .470 .310
10-405996-0 0 27488-0 0-2 Yellow .605 1.000 .440
*±.020
Sealing plugs are used to fill unused holes in multi-holed grommet configurations
55
QWL – accessories
adapter, cable clamp
10-113138-XX
adapter
M85049/2-( )C
cable clamp
V
LEFT HAND
E
D
L
A
B
C
F
Y
M
KA
56
QWL – accessories
adapter, cable clamp, sleeve
Shell
Size
Adapter
Part
Number*
Clamp
MS Part
Number*
A Thread
Class 2A
(Plated)
B Min
Full
Thd
C Dia
+.000
–.010
D
±.020
E Dia
+.010
–.020
F
±.010
K Dia
Cable Range L
Max
M
Max
V
Thread
Class 2B-LH
Y
MaxFree Closed
12 10-113138-12
10-113138-13
M85049/2-4C
M85049/2-4C
.625-24UNEF
.625-24NEF
.422
.422
.386
.386
1.078
1.125
.750
.750
.688
.688 .302 .094 1.390
1.609 1.375 .625-24NEF
.625-24NEF .906
14 10-113138-14
10-113138-15
M85049/2-6C
M85049/2-6C
.750-20UNEF
.750-20UNEF
.422
.422
.500
.500
1.078
1.125
.875
.875
.812
.812 .428 .230 1.390
1.609 1.375 .750-20UNEF
.750-20UNEF 1.031
16 10-113138-16
10-113138-17
M85049/2-8C
M85049/2-8C
.875-20UNEF
.875-20UNEF
.422
.422
.625
.625
1.078
1.125
1.000
1.000
.938
.938 .515 .316 1.390
1.609 1.375 .875-20UNEF
.875-20UNEF 1.125
18 10-113138-18 M85049/2-10C 1.000-20UNEF .422 .752 1.125 1.188 1.062 .614 .378 1.609 1.437 1.000-20UNEF 1.234
20 10-113138-20 M85049/2-12C 1.1875-18UNEF .422 .891 1.125 1.312 1.250 .738 .445 1.609 1.437 1.125-18NEF 1.484
22 10-113138-22 M85049/2-12C 1.1875-18NEF .422 .891 1.125 1.438 1.250 .738 .445 1.609 1.437 1.250-18NEF 1.484
24 10-113138-24 M85049/2-16C 1.4375-18UNEF .422 1.111 1.125 1.562 1.500 .926 .611 1.609 1.562 1.375-18NEF 1.671
28 10-113138-28 M85049/2-16C 1.4375-18NEF .422 1.111 1.297 1.812 1.500 .926 .611 1.781 1.562 1.625-18NEF 1.671
32 10-113138-32 M85049/2-20C 1.750-18UNS .484 1.422 1.297 2.062 1.875 1.200 .922 1.781 1.812 1.875-16UN 2.188
36 10-113138-36 M85049/2-24C 2.000-18UNS .562 1.672 1.297 2.250 2.125 1.363 .922 1.781 2.062 2.0625-16N 2.344
40 10-113138-40 M85049/2-28C 2.250-16UN .562 1.914 1.297 2.500 2.375 1.611 1.180 1.781 2.062 2.3125-16N 2.594
44 10-113138-44 M85049/2-32C 2.500-16UN .562 2.142 1.297 2.812 2.625 1.865 1.427 1.781 2.188 2.625-16UN 2.812
Sleeve not supplied as part of MS3057-( )C assembly.
Order separately by part number shown.
Shell
Size
Sleeve
MS Part
Number
D
Dia.
±.016
Z Dia
Free
±.016 Closed
12 MS3420-4A .302 .219 .010
14 MS3420-4A
MS3420-6A
.302
.427
.219
.312
.020
.114
16 MS3420-6A
MS3420-8A
.427
.531
.312
.438
.085
.220
18 MS3420-6A
MS3420-10A
.427
.615
.312
.438
.085
.200
20 MS3420-10A
MS3420-12A
.615
.740
.438
.541
.177
.270
22 MS3420-10A
MS3420-12A
.615
.740
.438
.541
.177
.270
24
MS3420-8A
MS3420-12A
MS3420-16A
.531
.740
.927
.438
.541
.750
.186
.260
.433
26
MS3420-8A
MS3420-12A
MS3420-16A
.531
.740
.927
.438
.541
.750
.186
.260
.433
32
MS3420-12A
MS3420-16A
MS3420-20A
.740
.927
1.240
.541
.750
.938
.273
.442
.620
36
MS3420-16A
MS3420-20A
MS3420-24A
.927
1.240
1.365
.750
.938
1.125
.358
.504
.682
40
MS3420-16A
MS3420-20A
MS3420-28A
.927
1.240
1.614
.750
.938
1.250
.368
.514
.816
44
MS3420-20A
MS3420-28A
MS3420-32A
1.240
1.614
1.865
.938
1.250
1.625
.638
.897
1.229
MS3420-( )A
sleeve
Z
D
2.000 ± .031
57
10-101046-( ), 10-101531-( )
plug protective covers
10-101063-( ), 10-101048-( )
receptacle protective covers
QWL – accessories
protection caps
L
F
E
10-101046
10-101531
A
C
B
L
D
E
10-101063
10-101048
A
C
B
58
QWL – accessories
protection caps
All dimensions for reference only.
*For complete order number see page 5.
Shell
Size
Without
Eyelet End
Part Number*
With
Eyelet End
Part Number*
A Thread
Class 2A
B
Dia
+.010
–.000
C
Approx.
E
Approx.
F
Flat
±.010
L
Max.
10 10-101046-10 10-101531-10 .6250-0.05P-0.1L-DS .125 3.000 3.375 .500 1.250
12 10-101046-12 10-101531-12 .7500-0.1P-0.2L-DS .125 3.500 3.875 .625 1.438
14 10-101046-14 10-101531-14 .8750-0.1P-0.2L-DS .125 3.500 3.875 .750 1.438
16 10-101046-16 10-101531-16 1.0000-0.1P-0.2L-DS .140 3.500 3.875 .875 1.438
18 10-101046-18 10-101531-18 1.1250-0.1P-0.2L-DS .140 3.500 4.000 1.000 1.438
20 10-101046-20 10-101531-20 1.2500-0.1P-0.2L-DS .193 4.000 4.500 1.062 1.438
22 10-101046-22 10-101531-22 1.3750-0.1P-0.2L-DS .193 4.000 4.500 1.125 1.438
24 10-101046-24 10-101531-24 1.5000-0.1P-0.2L-DS .193 4.500 5.000 1.250 1.438
28 10-101046-28 10-101531-28 1.7500-0.1P-0.2L-DS .193 4.500 5.000 1.500 1.438
32 10-101046-32 10-101531-32 2.0000-0.1P-0.2L-DS .193 5.000 5.500 1.750 1.438
36 10-101046-36 10-101531-36 2.2500-0.1P-0.2L-DS .193 5.000 5.500 2.000 1.438
40 10-101046-40 10-101531-40 2.5000-0.1P-0.2L-DS .193 5.000 5.500 2.250 1.438
44 10-101046-44 10-101531-44 2.7500-0.1P-0.2L-DS .193 6.000 6.000 2.500 1.438
48 10-101046-48 10-101531-48 3.0000-0.1P-0.2L-DS .193 6.000 6.000 2.750 1.438
All dimensions for reference only.
*For complete order number see page 5.
Shell
Size
Without
Eyelet End
Part Number*
With
Eyelet End
Part Number*
A Thread
Class 2B
B
Dia.
+.010
–.000
C
Approx.
D
Dia.
Max.
E
Approx.
L
Max.
10 10-101063-10 10-101048-10 .6250-0.05P-0.1L-DS .140 3.000 .844 3.375 .750
12 10-101063-12 10-101048-12 .7500-0.1P-0.2L-DS .140 3.500 .969 3.875 .750
14 10-101063-14 10-101048-14 .8750-0.1P-0.2L-DS .140 3.500 1.094 3.875 .750
16 10-101063-16 10-101048-16 1.0000-0.1P-0.2L-DS .140 3.500 1.219 3.875 .750
18 10-101063-18 10-101048-18 1.1250-0.1P-0.2L-DS .193 3.500 1.344 4.000 .969
20 10-101063-20 10-101048-20 1.2500-0.1P-0.2L-DS .193 4.000 1.469 4.500 .969
22 10-101063-22 10-101048-22 1.3750-0.1P-0.2L-DS .193 4.000 1.562 4.500 .969
24 10-101063-24 10-101048-24 1.5000-0.1P-0.2L-DS .193 4.500 1.688 5.000 .969
28 10-101063-28 10-101048-28 1.7500-0.1P-0.2L-DS .193 4.500 1.938 5.000 .969
32 10-101063-32 10-101048-32 2.0000-0.1P-0.2L-DS .193 5.000 2.219 5.500 .969
36 10-101063-36 10-101048-36 2.2500-0.1P-0.2L-DS .193 5.000 2.469 5.500 .969
40 10-101063-40 10-101048-40 2.5000-0.1P-0.2L-DS .193 5.000 2.719 5.500 .969
44 10-101063-44 10-101048-44 2.7500-0.1P-0.2L-DS .193 6.000 2.969 6.000 .969
48 10-101063-48 10-101048-48 3.0000-0.1P-0.2L-DS .193 6.000 3.219 6.000 .969
59
QWL – accessories
flange gasket, grip banding clamp
All dimensions for reference only.
*For complete order number see page 5.
Part
Number*
Part
Number*
Shell
Size
F
Dia.
+.016
–.000
R
±.010
S
+.016
–.000
T
Dia.
±.010
10-36675-10 10-40450-10 10 .625 .719 1.000 .172
10-36675-12 10-40450-12 12 .750 .813 1.094 .172
10-36675-14 10-40450-14 14 .875 .906 1.188 .172
10-36675-16 10-40450-16 16 1.000 .969 1.281 .172
10-36675-18 10-40450-18 18 1.125 1.063 1.375 .203
10-36675-20 10-40450-20 20 1.250 1.156 1.500 .203
10-36675-22 10-40450-22 22 1.375 1.250 1.625 .203
10-36675-24 10-40450-24 24 1.500 1.375 1.750 .203
10-36675-28 10-40450-28 28 1.750 1.563 2.000 .203
10-36675-32 10-40450-32 32 2.000 1.750 2.250 .219
10-36675-36 10-40450-36 36 2.188 1.938 2.500 .219
10-36675-40 10-40450-40 40 2.438 2.188 2.750 .219
10-36675-44 10-40450-44 44 2.688 2.375 3.000 .219
10-36675-48 10-40450-48 48 2.938 2.625 3.250 .219
All dimensions for reference only.
*For complete order number see page 5.
Part
Number*
A Dia.
Max. Min.
10-183249-10 1.125 .812
10-183249-11 1.312 .938
10-183249-12 1.500 1.125
10-183249-13 1.688 1.312
10-183249-14 1.875 1.500
10-183249-15 2.062 1.688
10-183249-16 2.250 1.875
10-183249-17 2.438 2.062
10-183249-18 2.625 2.250
10-183249-19 2.812 2.438
10-183249-20 3.000 2.625
10-36675-( )
10-40450-( )
flange gaskets
10-183249-( )
grip banding clamp
S
F
T
4 HOLES
R
(TP)
R
(TP)
.031 ± ,010 (10-36675)
.031 ± .005 (10-40450)
.375
REF.
A
60
QWL
crimp contacts
Machined from copper alloy and silver-plated for maximum corrosion resistance, with a
minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12
socket contacts are of the closed entry design. Crimp contacts are available for all MS
insert arrangements and are identified with an Amphenol® proprietary number.
* When using wire adapter sleeve shown.
** Contact ratings as stated are test ratings only. The connector could not withstand full
rated current through all contacts continuously. Please note that the electrical data
given is not an establishment of electrical safety factors. This is left entirely in the
designer’s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
The 12S, 14S and 16S connectors require short contacts.
MS/STANDARD CRIMP CONTACTS
Part
Number
Pin/
Socket
Mating
End
Size
Wire
Barrel
Size
Allowable
Wire
Size
Required
Wire Adapter
Sleeve
Test
Current**
Amps
10-40553
10-40552 or
10-597109-161
Pin
Socket
16
Short† 16
16
18
20
22* 10-74696-6
13
10
7.5
5
10-40557
10-40556 or
10-597109-171
Pin
Socket
16
Long 16
16
18
20
22* 10-74696-6
13
10
7.5
5
10-40561
10-40560 or
10-597109-131
Pin
Socket
12 12
12
14
23
17
10-40792
10-40793
Pin
Socket 88
8
10* 10-74696-1
46
33
10-40564
10-40565
Pin
Socket 44
4
6* 10-74696-2
80
60
10-40562 or
10-581806
10-40563 or
10-581808
Pin
Socket
00
0
2* 10-74696-7
150
100
* The values listed in Table I represent operating values which include a gen-
erous safety factor. It may be necessary for some applications to exceed
the operating voltages listed here. If this is necessary, designers will find
Table II useful for determining the degree to which the recommended val-
ues of Table I can be exceeded.
TABLE I
CONTACT ARRANGEMENT SERVICE RATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
TABLE II
ALTITUDE VOLTAGE DERATING** CHART
MS
Service
Rating
Nominal
Distance
Standard Sea
Level Conditions
Pressure Altitude†
50,000 Feet
Pressure Altitude†
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltag e
AC (RMS)
Test
Voltag e
AC (RMS)
Inst. 1/32 1/16 1400 1000 500 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer
must determine his own operating voltage by the application of a safety factor to
the above derating chart to compensate for circuit transients, surges, etc.
61
QWL
solder contacts
Machined copper alloy contacts in a full range of sizes, with closed entry
socket design in the size 12 and 16 contacts. A heavy silver-plated fin-
ish is deposited on all MS style solder contacts for maximum corrosion
resistance, maximum current carrying capacity and low millivolt drop.
* Solder Wells Filled
** Contact ratings as stated are test ratings only. The connector could not with-
stand full rated current through all contacts continuously. Please note that the
electrical data given is not an establishment of electrical safety factors. This is
left entirely in the designer’s hands as he can best determine which peak volt-
age, switching surges, transients, etc. can be expected in a particular circuit.
The 12S, 14S and 16S connectors require short contacts.
MS/STANDARD SOLDER CONTACTS*
Part
Number
Pin/
Socket
Mating
End
Size
Wire
Barrel
Size
Allowable
Wire
Size
Test
Current**
Amps
10-40569
10-597107-161
Pin
Socket
16
Short† 16
16
18
20
22
13
10
7.5
5
10-40599
10-597107-171
Pin
Socket
16 Long 16
16
18
20
22
13
10
7.5
5
10-33646
10-597107-131
Pin
Socket
12 12 12
14
23
17
10-35531
10-35532
Pin
Socket
88 8
10
46
33
10-35529
10-35530
Pin
Socket
44 4
6
80
60
10-35527
10-35528
Pin
Socket
00
0
1
2
150
125
100
* The values listed in Table I represent operating values which include a gen-
erous safety factor. It may be necessary for some applications to exceed
the operating voltages listed here. If this is necessary, designers will find
Table II useful for determining the degree to which the recommended val-
ues of Table I can be exceeded.
TABLE I
CONTACT ARRANGEMENT SERVICE RATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
TABLE II
ALTITUDE VOLTAGE DERATING** CHART
MS
Service
Rating
Nominal
Distance
Standard Sea
Level Conditions
Pressure Altitude†
50,000 Feet
Pressure Altitude†
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltag e
AC (RMS)
Minimum
Flashover
Voltag e
AC (RMS)
Test
Voltag e
AC (RMS)
Inst. 1/32 1/16 1400 1000 500 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer must determine his own
operating voltage by the application of a safety factor to the above derating chart to compensate for cir-
cuit transients, surges, etc.
62
QWL
application tools (crimp type)
Complete installation instructions (L-516) for Amphenol®
QWL Series Connectors are available on request.
The following data includes information pertaining to the
application tools which have been established for crimping,
inserting and removing crimp contacts used in QWL
Series Connectors.
Contact Crimping, Insertion & Removal Tools
*Refer to tool manufacturers for appropriate crimp tools or positioner/turret.
†Tools used with Arbor press 11-7364.
Crimping
To o l
Positioner/
Turret
Contact
Size
Contact
Style
Insertion
Tool
Removal
Tool
M22520/1-01
M22520/1-01
*
*
*
*
*
*
*
*
16
12
8
4
0
Pin & Socket
Pin & Socket
Pin & Socket
Pin & Socket
Pin & Socket
11-7345
11-7082
11-8220
11-7365-4†
11-7365-5†
11-8250 Kit
11-8250 Kit
11-8250 Kit
Pin11-7370-4†
Socket 11-7674-2†
Pin 11-7370-5†
Socket 11-7674-3†
63
QWL
thermocouple contacts
Available from Amphenol is a complete line of cylindrical con-
nectors featuring thermocouple contact insert arrangements.
The design of these contacts is such that standard shell com-
ponents and resilient inserts are used in the assemblies. Ther-
mocouple contacts are available in all arrangements which
contain size 12 and 16 pins and sockets, and feature probe-
proof, closed entry design for the socket contacts. MS-
approved and other commercial arrangements may be ordered
with thermocouple contacts substituted for the standard con-
tacts. All thermocouple contact layouts may contain either iron,
alumel, chromel, constantan, standard (copper) or brass
(dummy) contacts. The resulting assembly will be identified
with an Amphenol® part number.
IDENTIFICATION
For the purpose of wiring identification, thermocouple contacts are
marked in accordance with the following color code which agrees with
the wire code.
Chromel. . . . . . . White
Alumel . . . . . . . Green
Iron . . . . . . . . Black
Constantan . . . . . Yellow
This identification is made by means of small dots of stain on solder
well end of the contact and is in accordance with the listing shown
above.
WIRE WELL DATA
RECOMMENDED WIRE:
I Chromel – Alumel: Use wire in accordance with AN-W-29
II Iron – Constantan: Use wire in accordance with AN-W-8b
Contact Size 12 16
Well Inside
Diameter
+.004
–.002 .125 .094
Well
Depth
+.031
–.000 .250 .188
Solder Well
Barrel
Outside Diameter
.166±.003 .125+.002
–.004
64
QWL
thermocouple arrangements
Military connector specifications do not provide for thermo-
couple contact usage in established MS inserts. Amphe-
nol® has established a series of insert arrangements
containing thermocouple contacts. Some inserts have
been rotated into positions outside those covered by MS
drawings to prevent cross plugging. Available thermocou-
ple arrangements are tabulated on the following pages.
Please contact your local sales office or Sidney, NY for
additional information regarding thermocouple arrange-
ments particular to your application.
The following abbreviations are used in the contact material column:
Abbreviation Ir. Con. Cu. Ch. Al. Dummy
Material Iron Constantan Copper Chromel Alumel Brass
†Insert arrangements including the letter “S” are available in QWL Series Connectors only.*No rotation required.
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
To t a l
Con-
tacts
Contact
Size Pin Insert
Rotation
C/W
Contact Material
12 16
12S-51 12S-3 2 2 315° A = Ch.; B = Al.
12S-54 12S-3 2 2 315° A = Ir.; B = Con.
12S-55 12S-3 2 2 45° A = Cu.; B = Con.
12S-56 12S-3 2 2 None A = Al.; B = Ch.
12S-57 12S-3 2 2 60° A = Ch.; B = Al.
12S-58 12S-3 2 2 120° A = Ir.; B = Con.
12S-59 12S-3 2 2 None A = Ir.; B = Con.
12S-60 12S-3 2 2 None A = Cu.; B = Con.
12S-61 12S-3 2 2 None A = Ch.; B = Con.
12S-62 12S-3 2 2 None A = Ch.; B = Al.
12S-64 12S-3 2 2 315° A = Cu.; B = Con.
12S-65 12S-3 2 2 None A = Con.; B = Ir.
14S-51 14S-9 2 2 90° A = Al.; B = Ch.
14S-52 14S-2 4 4 45° A, B = Cu.; C = Al.; D = Ch.
14S-53 14S-9 2 2 90° A = Ir.; B = Con.
14S-54 14S-6 6 6 45° A, C, E = Ir.; B, D, F = Con.
14S-55 14S-2 4 4 45° A, C = Ir.; B, D = Con.
14S-56 14S-2 4 4 45° A = Ir.; B = Con.; C, D = Cu.
14S-57 14S-2 4 4 45° A, C = Al.; B, D = Ch.
14S-58 14S-7 3 3 45° A = Al.;B = Ch.;C = Cu.
14S-59 14S-9 2 2 90° A = Cu.; B = Con.
14S-60 14S-9 2 2 * A = Al.; B = Ch.
14S-61 14S-6 6 6 45° A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
14S-63 14S-6 6 6 * A, C = Al.; B, D = Ch.; E = Ir.; F = Con.
14S-64 14S-2 4 4 * A, C = Con.; B, D = Cu.
14S-65 14S-6 6 6 * A, C, E = Cu.; B, D, F = Con.
14S-67 14S-6 6 6 * A = Al.; B = Ch.; Bal = Cu.
14S-68 14S-2 4 4 45° A = Ch.; B = Con.; C, D = Cu.
14S-69 14S-7 3 3 * A = Con.; B = Ch.; C = Cu.
14S-70 14S-2 4 4 * A, D = Ch.; B, C = Al.
14S-71 14S-2 4 4 * A, B, D = Cu.; C = Con.
14S-72 14S-9 2 2 * A = Con.; B = Cu.
14S-73 14S-2 4 4 * A, B = Cu.; C = Al.; D = Ch.
65
QWL
thermocouple arrangements (Cont’d.)
†Insert arrangements including the letter “S” are available in QWL Series Connectors only. *No rotation required.
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
To t a l
Con-
tacts
Contact
Size Pin Insert
Rotation
C/W
Contact Material
12 16
14S-74 14S-2 4 4 * A, B = Ch.; C, D = Al.
14S-75 14S-2 4 4 * A, B = Cu.; C, D = Con.
14S-76 14S-2 4 4 * A, C = Al.; B, D = Ch.
14S-77 14S-2 4 4 * A, D = Al.; B, C = Ch.
14S-78 14S-9 2 2 * A = Ch.; B = Al.
14S-79 14S-5 5 5 * A, B, E = Cu.; C = Al.; D = Ch.
14S-80 14S-9 2 2 * A = Cu.; B = Con.
14S-81 14S-9 2 2 * A = Al.; B = Cu.
14S-82 14S-2 4 4 * A = Ir.; B = Con.; C = Ch.; D = Al.
14S-83 14S-6 6 6 * A, C = Ir.; B, D = Con.; E, F = Cu.
14S-84 14S-6 6 6 * A, B = Al.; Bal = Cu.
14S-85 14S-7 3 3 * A = Ch.; B = Al.; C = Cu.
14S-86 14S-6 6 6 * A, F = Ir.; B, E = Con.; C, D = Cu.
14S-87 14S-6 6 6 * A, B, C, D = Ir.; E, F = Con.
14S-88 14S-9 2 2 90° A = Ch.; B = Con.
14S-89 14S-7 3 3 * A = Ir.; B = Cu., C = Con.
14S-90 14S-6 6 6 * A = Al.; C = Ch.; Bal. = Cu.
14S-91 14S-2 4 4 * A = Al.; B = Ch.; Bal. = Cu.
14S-93 14S-6 6 6 * A, B, F = Al.; D, C, E = Ch.
14-59 14-53 6 6 * A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu.
16S-52 16S-4 2 2 * A = Ch.; B = Al.
16S-54 16S-1 7 7 * A = Al.; B = Ch.; Bal. = Cu.
16S-55 16S-1 7 7 * A = Con.; Bal. = Cu.
16S-56 16S-1 7 7 * A = Al.; D = Ch.; Bal. = Cu.
16S-57 16S-1 7 7 * A, B = Al.; C, D = Ch.; Bal. = Cu.
16S-58 16S-1 7 7 * A, G = Al.; Bal. = Ch.
16S-59 16S-1 7 7 * A, C = Ir.; B, D = Con.; Bal. = Cu.
16S-60 16S-1 7 7 * A = Ir.; B = Con.; Bal. = Cu.
16S-61 16S-1 7 7 * G = Al.; Bal. = Ch.
16-52 16-11 2 2 90° A = Al.; B = Ch.
16-53 16-9 4 2 2 70° A = Al.; C = Ch.; B, D = Cu.
16-55 16-10 3 3 45° A = Al.; B = Ch.; C = Cu.
16-56 16-13 2 2 90° A = Con.; B = Cu.
16-57 16-10 3 3 * A = Al.; B = Cu.; C = Ch.
16-58 16-10 3 3 * A = Con.; B, C = Cu.
16-60 16-13 2 2 * A = Al.; B = Ch.
16-62 16-11 2 2 * A = Con.; B = Cu.
16-67 16-11 2 2 * A = Al.; B = Ch.;
16-68 16-9 4 2 2 * A, B, C = Ch.; D = Al.
18-51 18-12 6 6 * A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy
18-52 18-11 5 5 * A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy
18-53 18-12 6 6 * A, D = Ir.; B, E = Con.; C, F = Dummy
18-54 18-15 4 4 * A, C = Al.; B, D = Ch.
18-56 18-1 10 10 45° A, C, E, G, I = Ir.; B, D, F, H, J = Con.
18-57 18-12 6 6 45° A, C, E = Al.; B, D, F = Ch.
18-59 18-12 6 6 45° A, C = Ir.; B, E, F = Con.; D = Cu.
66
QWL
thermocouple arrangements (Cont’d.)
*No rotation required.
Shell
Size
and Arrg.†
Similar
To
MS Arrg.
To t a l
Con-
tacts
Contact
Size Pin Insert
Rotation
C/W
Contact Material
12 16
18-60 18-11 5 5 45° A, D = Al.; B, C = Ch.; E = Al.
18-61 18-12 6 6 * A, C = Ir.; B, D = Con.; E = Ch.; F = Al.
18-62 18-12 6 6 * A, B, C = Ir.; D, E, F = Con.
18-63 18-15 4 4 * A, C = Con.; B, D = Cu.
18-65 18-12 6 6 * A = Ir.; B = Con.; Bal. = Cu.
18-66 18-1 10 10 * A, C, E, G, I = Cu.; B, D, F, H, J = Con.
18-67 18-12 6 6 * A, C, E = Cu.; B, D, F = Con.
18-68 18-11 5 5 * A, D = Al.; B, C = Ch.; E = Cu.
18-69 18-1 10 10 * A = Al.; B = Ch.; Bal. = Cu.
18-70 18-11 5 5 * A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu.
18-71 18-15 4 4 * A = Con.; Bal. = Cu.
18-72 18-15 4 4 * D = Con.; Bal. = Cu.
18-73 18-9 7 2 5 * A = Al.; D = Ch.; Bal. = Cu.
18-74 18-12 6 6 * A = Ch.; B = Al., D = Ir.; E = Cu.; C, F = Con.
18-76 18-1 10 10 * A, C, E, G, I = Al.; B, D, F, H, J = Ch.
18-77 18-1 10 10 * A, C, E, G = Al.; B, D, F, H = Ch.; Bal. = Cu.
18-78 18-1 10 10 * A = Al.; B = Ch.; D, F, H, J = Con.; Bal. = Cu.
18-79 18-12 6 6 * A, F = Ir.; B, E = Con.; C, D = Cu.
18-80 18-15 4 4 * A, C = Cu.; B, D = Con.
18-81 18-1 10 10 * E, G = Con.; Bal. = Cu.
18-82 18-1 10 10 * E, G = Con.; F, H = Ir.; Bal. = Cu.
20-52 20-4 4 4 315° A = Ir.; B = Con.; C = Ch.; D = Al.
20-56 20-7 8 8 45° A, B, G, H = Ir.; C, D, E, F = Con.
20-60 20-7 8 8 45° D = Ch.; E = Al.; Bal. = Cu.
20-61 20-29 17 17 45° A, B, M = Cu.; Bal. = Con.
20-62 20-15 7 7 80° A, C, E = Al.; B, D, F = Ch.; G = Cu.
20-64 20-27 14 14 * A = Al.; C = Ch.; Bal. = Cu.
20-65 20-27 14 14 * A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con.
20-67 20-16 9 2 7 * H = Al.; I = Ch.; Bal. = Cu.
20-68 20-7 8 8 * A, B, G, H = Con.; C, D, E, F = Cu.
20-69 20-27 14 14 * A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con.
20-70 20-29 17 17 * A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con.
20-71 20-29 17 17 * S = Al.; R = Ch.; Bal. = Cu.
20-74 20-29 17 17 * A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu.
20-75 20-15 7 7 * G = Al.; Bal = Ch.
20-77 20-16 9 2 7 * A = Con.; Bal. = Std.
20-80 20-27 14 14 * A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con.
20-81 20-27 14 14 * A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al.
20-82 20-29 17 17 * A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu.
20-85 20-33 11 11 * K, L = Al.; Bal. = Ch.
20-87 20-29 17 17 * A, C, E, G, J, L, N, R = Con.; Bal. = Cu.
20-88 20-27 14 14 * A, C, E = Al.; B, D, F = Ch.; G, H, K, N = Con.; Bal. = Cu.
20-89 20-27 14 14 * B, D, F, H, J, L = Al.; A, C, E, G, I, K = Ch.; M, N = Cu.
20-90 20-27 14 14 * C, G, I = Ch.; K, L, M = Al.; Bal. = Cu.
20-91 20-27 14 14 * I = Ch.; K = Al.; Bal. = Cu.
67
QWL
thermocouple arrangements (Cont’d.)
Shell
Size
and Arrg.
Similar
To
MS Arrg.
To t a l
Con-
tacts
Contact
Size Pin Insert
Rotation
C/W
Contact Material
12 16
20-92 20-7 8 8 * A = Al.; H = Cu.; Bal. = Ch.
20-93 20-27 14 14 * A = Ch.; B = Al.; Bal. = Cu.
20-94 20-15 7 7 * A, C, E = Al.; B, D, F = Ch.; G = Cu.
20-99 20-33 11 11 * A = Al.; Bal. = Ch.
22-57 22-14 19 19 45° A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu.
22-60 22-14 19 19 45° U = Al.; N = Ch.; Bal. = Cu.
22-62 22-23 8 8 60° A, B, F, G = Al.; C, D, E, H = Ch.
22-68 22-19 14 14 45° A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con.
22-69 22-19 14 14 45° A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con.
22-71 22-14 19 19 * V = Al., U = Ch.; Bal. = Cu.
22-72 22-5 6 2 4 * B = Al.; E = Ch.; Bal. = Cu.
22-73 22-5 6 2 4 * E = Al.; B = Ch.; Bal. = Cu.
22-74 22-23 8 8 * A, C, E, G = Ir.; B, D, F, H = Con.
22-75 22-23 8 8 * A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con.
22-76 21 21 * W = Con.; Bal. = Cu.
22-77 22-19 14 14 * B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con.
22-78 22-14 19 19 * A, C, E, G, H, K, M, P, R, T = Con.; Bal. = Cu.
22-79 22-10 4 4 * A, C = Con.; B, D = Cu.
22-82 22-14 19 19 * A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S, U = Con.; V = Cu.
22-83 22-18 8 8 * A, C, E, G = Al.; B, D, F, H = Ch.
22-84 22-14 19 19 * A, C, S = Ch.; B, D, T = Al.; Bal. = Cu.
22-85 22-19 14 14 * A, C, E, G, J, L, N = Al.; B, D, F, H, K, M, P = Ch.
22-89 22-28 7 7 * A, C, E = Ir.; B, D, F = Con.; G = Cu.
24-56 24-20 11 2 9 45° E = Al.; F = Ch.; Bal. = Cu.
24-57 24-28 24 24 45° A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Bal. = Al.
24-62 24-28 24 24 * A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Bal. = Cu.
24-63 24-28 24 24 * A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con.
24-64 24-5 16 16 * A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con.
24-68 24-28 24 24 * D = Con.; Bal. = Cu.
24-81 24-7 16 2 14 * A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con.
24-88 24-28 24 24 * A, B, C, D, E, F, G, H, J, K, L, M = Con.; Bal. = Ir.
24-91 24-5 16 16 * A, B, C, D, E, F, G, H = Al.; J, K, L, M, N, P, R, S = Ch.
28-53 28-11 22 4 18 45° J, L = Al.; K, M = Ch.; Bal. = Cu.
28-58 28-20 14 10 4 45° A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu.
28-61 28-21 37 37 45° A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Bal. = Con.
28-63 28-20 14 10 4 45° A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Bal. = Cu.
28-64 28-15 35 35 * A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.;
Bal. = Cu.
28-65 28-12 26 26 * A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M,
P, S, U, W, = Con.; Y, a = Ch.; b, d = Cu.
28-67 28-16 20 20 * U = Con.; Bal. = Cu.
28-68 28-15 35 35 45° T = Al.; U = Ch.; Bal. = Cu.
28-69 28-11 22 4 18 * G = Al.; R = Ch.; Bal. = Cu.
28-70 28-11 22 4 18 * A = Al.; B = Ch.; Bal. = Cu.
28-77 28-11 22 4 18 * J = Con.; Bal. = Cu.
68
QWL
thermocouple arrangements (Cont’d.)
††Amphenol® arrangement*No rotation required.
Shell
Size
and Arrg.
Similar
To
MS Arrg.
To t a l
Con-
tacts
Contact
Size Pin Insert
Rotation
C/W
Contact Material
12 16
28-81 28-21 37 37 * A, D, S, Z, n, s = Ir.; B, J, K, f, g, r, = Con.; G, L, P, b, e, j = Al.;
F, H, T, X, h, k = Ch.; Bal. = Cu.
28-85 28-11 22 4 18 45° K, M = Al.; J, L = Ch.; Bal. = Cu.
28-91 28-9 12 6 6 * M = Ir.; L = Con.; Bal. = Cu.
28-94 28-12 26 26 * B, D, F, H, K, M, P, S, U, W, Y, a, d = Al.; Bal. = Ch.
28-98 28-21 37 37 * M = Al.; F = Ch.; Bal. = Cu.
28-99 28-12 26 26 * B, D, F, H, K, M, P, S, U, W, Y, a = Con.; Bal. = Cu.
28-AC 28-16 20 20 * A, C, E, G, J, L = Ir.; B, D, F, N, K, M = Con.; Bal. = Cu.
28-AD 28-21 37 37 45° A, C, F, H, J, K, M, N, T, X, Z, a, d, h, k, m, n, r = Cu.; Bal. = Con.
28-AE 28-21 37 37 * A, C, E, G, J, L, N, R, T, V, X, a, c, e, g, j, m, p, s = Cu.; Bal. = Con.
28-AF 28-18 12 12 * A, C, E, G, J, L = Ch.; Bal. = Al.
28-AG 28-12 26 26 * A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; Bal. = Cu.
28-AK 28-21 37 37 * A, B, C, D, J, K, L, M, N, P, X, a, b, c, d, e, m, p = Ch.; n = Cu.; Bal. = Al.
32-51 32-8 30 6 24 90° M = Ch.; N = Al.; Bal. = Cu.
32-55 32-8 30 6 24 125° M, N, = Ch.; O, P = Al.; Bal. = Cu.
32-91 32-64 54 54 * A, C, E, G, J, L, N, P, S, U, W, Y, a, c, e, g, j, m = Ir.; B, D, F, H, K, M, O,
R, T, V, X, Z, b, d, f, h, k, n = Con.; Bal. = Cu.
36-53 36-7 47 7 40 45° u, v, w = Al.; x, y, z = Ch.; Bal. = Cu.
36-56 36-10 48 48 * A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Bal. = Cu.
36-57 36-8 47 1 46 * W = Al.; f = Ch.; Bal. = Cu.
36-58 36-15 35 35 * H = Al.; G = Ch.; Bal. = Cu.
36-61 36-15 35 35 * A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Bal. = Cu.
36-62 36-10 48 48 * A, C, E = Al.; B, D, F = Ch.; Bal. = Cu.
36-82 36-52†† 52 52 * v, g = Ir.; p, y, c = Con.; x = Ch.; Bal. = Cu.
36-86 36-10 48 48 *
A, C, E, G, J, L, N, P, R, T, V, X = Al.; B, D, F, H, K, M, O, Q,
S, U, W, Y = Ch.; z, b, d, f, h, k, n, q, s, u, w, y = Con.;
a, c, e, g, j, m, p, r, t, v, x, z = Cu.
36-88 36-52 52 52 * A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF = Cu.; Bal. = Con.
40-58 40-56†† 85 85 *
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF, AJ, AL, AN, AP, AS, AU, AW, AY, BA, BC,
BE, BH, BK, BM, BP, BS, BU = Ir.; Bal. = Con.
40-59 40-56†† 85 85 * B = Ch.; C = Con.; Bal. = Cu.
40-77 40-53†† 60 60 * 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Bal. = Cu.
40-78 40-53†† 60 60 * 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37, = Con.; 25, 39, 40, 41 = Al.;
43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Bal. = Cu.
40-88 40-53 60 60 * 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39,
41, 43, 45, 47, 49, 51, 53, 55, 57, 59 = Con.; Bal. = Cu.
40-AA 40-56 85 85 *
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF,
AJ, AL, AN, AR, AT = Cu.; B, D, F, J, L, N, R, T, V, X, Z, b, d, g, i, k, n,
q, s, u, w, y, AA, AC, AE, AH, AK, AM, AP, AS = Con.; AU, AW, AY, BA,
BC, BE, BH, BK, BM, BP, BS, BU = Ch.; AV, AX, AZ, BB, BD, BF, BJ, BL,
BN, BR, BT, BV = Al.
44-57 44-52 104 104 * A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con.
44-59 44-52 104 104 * 34 = Con.; 70 = Cu.
44-60 44-52 104 104 * A, C, E, etc. = Ch., (52); B, D, F, etc. = Al. (52)
44-62 44-52 104 104 * BY, BZ, CA, CB, CC, CD, CE, CR = Al.; CH, CJ, CK, CL, CM, CN, CP
CS = Ch.; Bal. = Cu.
69
Other Heavy Duty Cylindrical Connectors
Offered by Amphenol
Class “L” MIL-C-22992, QWLD and Star-Line
Amphenol meets the demands for heavy duty connectors by
providing three additional cylindrical connector series, each
with unique design characteristics for reliable operation in spe-
cific industrial environments.
Class “L”, MIL-C-22992 – for the heaviest electrical loads; for
military and industrial applications.
MIL-C-22992 qualification.
Current range from 40 to 200 amperes.
Direct current or single/three phase, 60/400 Hertz alternat-
ing current.
Rugged shells are resistant to vibration, high impact, shock
and corrosion
Double stub threads per MIL-STD-1373 for fast coupling
and easy cleaning.
Five key polarization system assures that circuits with
incompatible power characteristics (voltage, phase and frequency) are not mated.
Crimp termination. Contacts can be soldered.
Automatic grounding for safety.
Unique arc quenching capability provides a positive safety feature if connectors are
inadvertently disconnected under load.
4 shell styles with 7 insert patterns that facilitate large conductors.
Grommets and seals provide waterproofing.
QWLD for most power and control circuits
Military (MIL-C-22992) qualified connectors and industrial
equivalents available.
Increased shell size for greater durability than similar
standard connectors.
Crimp or solder termination.
Double stub threaded per MIL-STD-1373.
7 shell styles with over 300 insert patterns (MIL-C-5015 inserts
plus specials)
Class C is pressurized; Class R is environmental.
Star-line® Series – heavy duty environmentally sealed plugs and receptacles
that are used in all types of industrial and aerospace applications.
Equals or exceeds MIL-C-5015 E and R specifications.
UL listed and CSA listed circuit breaking capability.
Up to high amperage of 1135 amps at 1000VAC or DC rating available.
Solder, crimp and pressure terminals. Circuit breaking power and control
types.
Double lead Acme threads provide complete coupling in one turn of the
coupling nut, and do not clog under adverse weather conditions.
IP67 rating for environmental sealing.
Hard anodic coating provides dielectric strength with heat and corrosion
resistance.
Star-line EX® Series – Hybrid form of the Star-Line series with higher temperature
ranges. Cenelec Certified for use in Zone 1-IIc
hazardous environments. EX Certificate #03ATEX 1101X. For further information on these additional heavy duty cylindri-
cal connectors, refer to the following:
Catalog 12-052 for Class “L”, MIL-C-22992 Connectors
Catalog 12-052 for QWLD Connectors
Catalog 12-054 for Star-Line and Star-Line EX Connectors.
For further information on these additional heavy duty cylindri-
cal connectors, refer to the following:
Catalog 12-052 for Class “L”, MIL-C-22992 Connectors
Catalog 12-052 for QWLD Connectors
Catalog 12-054 for Star-Line and Star-Line EX Connectors.
Heavy Duty Class “L
Connectors
QWLD Series
Star-Line Series