2013.1 1
Housing
Metal fitting
Signal contact
0.75mm
0.75mm
0.5mm
Ground Plate
Ground plate and metal fitting make contact
2. 5 , 3
mm
2mm
■Features
1. Low Profile Design
The board to board mating height of 2mm, 2.5mm and 3mm suits
smaller, thinner case designs.
2.
Improved Transmission Efficiency Between Boards
Transmission characteristics have been improved through
a design that fixes ground plates to both sides of the
header and receptacle.
3. 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
4. Metal Fittings for Added Solder Weld Strength
Metal fittings provide greater adhesion to the board,
protecting against peeling.The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
5. Suited to High-Density Applications
The signal contact pitch of 0.5mm produces a smaller
connector utilizing less board area for mounting.
6. Structure Prevents Solder Wicking
A solder gap has been designed into the contact SMT
portion to prevent solder wicking.
7. High contact reliability
Effective mating length is 0.55mm (2mm height),
1mm(2.5mm, 3mm height) for signal contacts.
8. Optional Ground Plate
An alternate style without the ground plate is available.The
space provided by the ground plate removal has been filled
with additional signal contacts.
■Applications
Notebook computers, PDA, and other miniature electronic equipment.
Solder gap portion
Board mounting portion
Contact
surface Land
Structure Prevent solder vicking
10 Signal: 1 Ground Arrangement
Stacking height variation
Stacking height : 2mm Stacking height : 2.5mm, 3mm
Note: 2.0mm type and 2.5mm, 3mm type are not mated with each other.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
FX11 Series
2
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
Note 1: The thickness of the solder paste is not included in the stacking height.
Note 2: 2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other.
Header
Receptacle FX11L#-πP / π-SV
2mmFX11L#-πS / π-SV
BStacking height variation
BCross section of mating
Header
Receptacle
Header
Receptacle
Header
Receptacle
FX11#-πP / π-SV
2.5mmFX11#-πS / π-SV
FX11#-πP / π-SV0.5
3mm
FX11L#-πS-SV
FX11L#-πP-SV
2mm
FX11#-πS-SV
FX11#-πP-SV
2.5mm
FX11#-πP-SV0.5
3mm
● Without ground plate
● With ground plate
● Stacking height : 2mm
● Stacking height : 2.5mm, 3mm
Ground portion
Signal portion
Receptacle
Header
0.55 (Effective mating length)
0.55 (Effective mating length)
Signal portion Ground portion
Header
Receptacle
1 (Effective mating length)
0.9 (Effective mating length)
(Shown for stacking height 2.5mm type.)
3
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
●Impedance
The differential impedance is 100 +/- 10 ohm for FX11 at 50 ps rise time(20% to 80%).
●Insertion-loss-to-crosstalk ratio (ICR)
The insertion-loss-to-crosstalk ratio (ICR) with five differential FEXT aggressors meets the extrapolated
IEEE802.3ap specification to 10+Gbps.
■Signal integrity
●Pin assignment
To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSSG pin assignment is
recommended.(G=ground and S=signal)
Diff pairSignal
Ground
GSSG
0.8 0.9 11.1 1.2 1.3 1.4 1.5
80
85
90
95
100
105
110
115
120
Time (ns)
Z (Ohm)
FX11- 3mm DifferentialTDR
3mm(Without GND)
0 1 2 3 4 5 6 7 8 9 10
0
10
20
30
40
50
60
Frequency (GHz)
ICR (dB)
ICR
IEEEspec
3mm(Without GND)
4
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Product Specifications
Stacking height : 2mm
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Materials
Series name
:
FX11L
Form Symbol A
:
With guide post
B
:
Without guide post
Number of contacts
Signal/Ground:60/6, 80/8,
100/10, 120/12
Signal: 68, 92, 116, 140
Type without ground
Type with ground plate
Connector type
P
:
Header
S
:
Receptacle
Contact form
SV
:
Straight SMT
Blank, (71): Tray packaging (Without pick-and-place tape)
(21),(91): Embossed tape packaging (Without pick-and-place tape)
(22),(92): Embossed tape packaging (With pick-and-place tape)
1 4
5
6
2
3
Rating
Rated current
Rated voltage
0.3 A (Note 1)
50 V AC
Operating temperature range
Operating humidity range
-55 to 85ç
Relative humidity 95% or less
(No condensation)
Storage temperature range
Storage humidity range
-10 to +60ç (Note 2)
-40 to -70% (Note 2)
Part
Insulator
Contacts
Ground plate
Metal fitting
Metal plate
Material
LCP
Copper alloy
Phosphor bronze
Phosphor bronze
Phosphor bronze
Finish
Beige
Header
Engagement Area: Gold plating of 0.1µm
Termination Area
: Flash platingReceptacle
Tin plating
Tin plating
Remarks
UL94V-0
----------
----------
----------
----------
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions,
10 cycles each
Acceleration of 490 m/s
2
, 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
Temperature: -55
ç
→15 to 35
ç
→85
ç
→15 to 35
ç
Time: 30 min. →2 to 3 min. →30 min. →2 to 3 min. for 5 cycles
50 times
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
100 Mø or greater
No flashover or breakdown
60 mø or less
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Contact resistance of 70 m
ø
or less, insulation resistance of
100 M
ø
or greater, no damage, cracks, or parts looseness
Contact resistance of 70 m
ø
or less, insulation resistance of
100 M
ø
or greater, no damage, cracks, or parts looseness
Contact resistance of 70 mø or less
No damage, cracks, or parts looseness
No melting of resin portion which affects performance
1. Insulation resistance
2. Voltage proof
3. Contact resistance
Item Requirements Conditions
4. Vibration
5. Shock
6. Damp heat
(Steady state)
8. Durability
9. Resistance to
soldering heat
7. Temperature cycle
FX11L ##-ππP - / ππ- SV (✽ ✽)
1 642 5
FX11L ##-ππP - SV (✽ ✽)
1 642 3 5
Type With Ground Plate
Type Without Ground Plate
■Ordering information
3
5
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header with ground Plate
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
(71): Tray packaging
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
A±0.2
0.2±0.05
2-(Ø0.8)
(0.5)
1.2±0.21.9±0.3(0.6)
5.05±0.2
5.25±0.3
(0.75) (0.75)
(6)
C±0.3
D±0.1 Guidepost
B±0.2
C+0.1
0
+0.1
0
+0.1
0
0
-- 0.1
E
D±0.05
F min
A±0.05
0.5±0.03 0.75±0.03 0.75±0.03
1.8
3
4
4
Ø0.9±0.05
0.25±0.05
3±0.05
16±0.05 0.7±0.03(Land)
0.6±0.03(Metal mask)
0.3±0.03(Land)
0.25±0.03(Metal Mask)
B±0.05
3
Ø1±0.05
5.65
3.85
6.7min
2.95
2.25 2
0
-- 0.1
0
-- 0.1
0
-- 0.1
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
4
Recommended metal mask thickness: 0.15 mm
CL No.
573-0002-7-71
573-0003-0-71
573-0004-2-71
573-0005-5-71
573-0012-0-71
573-0013-3-71
573-0014-6-71
573-0015-9-71
Part Number
FX11LA-060P/06-SV(71)
FX11LA-080P/08-SV(71)
FX11LA-100P/10-SV(71)
FX11LA-120P/12-SV(71)
FX11LB-060P/06-SV(71)
FX11LB-080P/08-SV(71)
FX11LB-100P/10-SV(71)
FX11LB-120P/12-SV(71)
Number of contacts
Signal Ground
60
80
100
120
60
80
100
120
6
8
10
12
6
8
10
12
A
17.5
23.5
29.5
35.5
17.5
23.5
29.5
35.5
12
18
24
30
12
18
24
30
22.6
28.6
34.6
40.6
22.6
28.6
34.6
40.6
18
24
30
36
----------
----------
----------
----------
19.4
25.4
31.4
37.4
19.4
25.4
31.4
37.4
25.5
31.5
37.5
43.5
25.5
31.5
37.5
43.5
B C D E F Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 2mm stacking height
6
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
■Receptacle with ground Plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
A±0.2
B±0.2
C±0.3
D±0.1
(0.5)
1.2±0.21.65±0.3(0.6)
6±0.2
6.2±0.3
(0.75) (0.75)
(6)
0.2±0.050.5±0.05
Guidepost
2-(Ø0.8)
E+0.1
0
+0.1
0
+0.1
0
0
-- 0.1
F
D±0.05
A±0.05
0.5±0.03 0.75±0.03 0.75±0.03
1.8
4
2
Ø0.9±0.05
1.65±0.05
6
±
0.05
4.4
±
0.05
1
0.7
±
0.03(
Land)
0.6
±
0.03
(
Metal mask)
0.3
±
0.03(
Land)
0.25
±
0.03(
Metal mask)
B
±
0.05
Ø1±0.05 4
4
2.2
4.8
6.6
3
0
-- 0.1
0
-- 0.1
0
-- 0.1
Recommended metal mask thickness: 0.15 mm
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
3
4
CL No.
573-0102-1-71
573-0103-4-71
573-0104-7-71
573-0105-0-71
573-0112-5-71
573-0113-8-71
573-0114-0-71
573-0115-3-71
Part Number
FX11LA-060S/06-SV(71)
FX11LA-080S/08-SV(71)
FX11LA-100S/10-SV(71)
FX11LA-120S/12-SV(71)
FX11LB-060S/06-SV(71)
FX11LB-080S/08-SV(71)
FX11LB-100S/10-SV(71)
FX11LB-120S/12-SV(71)
Number of contacts
Signal Ground
60
80
100
120
60
80
100
120
6
8
10
12
6
8
10
12
A
17.5
23.5
29.5
35.5
17.5
23.5
29.5
35.5
12
18
24
30
12
18
24
30
25
31
37
43
25
31
37
43
20.8
26.8
32.8
38.8
----------
----------
----------
----------
25.4
31.4
37.4
43.4
25.4
31.4
37.4
43.4
22.2
28.2
34.2
40.2
22.2
28.2
34.2
40.2
B C D E F Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 2mm stacking height
7
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header without ground Plate
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
A±0.2
B±0.3
C±0.1
(0.5)
1.2±0.2
1.9±0.3(0.6)
5.05±0.2
5.25±0.3
Guidepost
0.2±0.05
1-(Ø0.8)
E min
3
36.7min
B+0.1
0
+0.1
0
+0.1
0
D 0
-- 0.1
C±0.05
A±0.05
0.5±0.03
1.8
Ø0.9±0.05
0.3±0.03(Land)
0.25±0.03(
Metal mask
)
Ø1±0.05
5.65
3.85
2.25
2
0.75±0.05
2
1
0
-- 0.1
0
-- 0.1
Recommended metal mask thickness: 0.15 mm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
CL No.
573-0042-1-**
573-0043-4-**
573-0044-7-**
573-0045-0-**
573-0052-5-**
573-0053-8-**
573-0054-0-**
573-0055-3-**
Part Number
FX11LA- 68P-SV(**)
FX11LA- 92P-SV(**)
FX11LA-116P-SV(**)
FX11LA-140P-SV(**)
FX11LB- 68P-SV(**)
FX11LB- 92P-SV(**)
FX11LB-116P-SV(**)
FX11LB-140P-SV(**)
Number of contacts
Signal
68
92
116
140
68
92
116
140
A
16.5
22.5
28.5
34.5
16.5
22.5
28.5
34.5
22.6
28.6
34.6
40.6
22.6
28.6
34.6
40.6
18
24
30
36
----------
----------
----------
----------
19.4
25.4
31.4
37.4
19.4
25.4
31.4
37.4
25.5
31.5
37.5
43.5
25.5
31.5
37.5
43.5
B C D E Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
● 2mm stacking height
8
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Receptacle without ground Plate
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
A±0.2
B±0.2
C±0.3
D±0.1
(0.5) 0.5±0.05
0.2±0.05
6.2±0.3
6±0.21.65±0.3(0.6)
Guidepost
D
±
0.05
A
±
0.05
B
±
0.05
0.5
±
0.03
2Ø0.9
±
0.05
2.15
±
0.05
0.3±0.03
(Land)
0.25±0.03
(Metal mask)
0.6±0.03
(Metal mask)
0.7±0.03
(Land)
4
2.2 0
-- 0.1
0
-- 0.1
0
-- 0.1
4.8
Ø1
±
0.05 2
6.6 +0.1
0
1
Recommended metal mask thickness: 0.15 mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
CL No.
573-0142-6-**
573-0143-9-**
573-0144-1-**
573-0145-4-**
573-0152-0-**
573-0153-2-**
573-0154-5-**
573-0155-8-**
Part Number
FX11LA- 68S-SV(**)
FX11LA- 92S-SV(**)
FX11LA-116S-SV(**)
FX11LA-140S-SV(**)
FX11LB- 68S-SV(**)
FX11LB- 92S-SV(**)
FX11LB-116S-SV(**)
FX11LB-140S-SV(**)
Number of contacts
Signal
68
92
116
140
68
92
116
140
A
18
24
30
36
18
24
30
36
16.5
22.5
28.5
34.5
16.5
22.5
28.5
34.5
25
31
37
43
25
31
37
43
20.8
26.8
32.8
38.8
----------
----------
----------
----------
B C D Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 2mm stacking height
9
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Product Specifications
Stacking height : 2.5mm, 3mm
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Materials
■Ordering information
Series name
:
FX11
Form Symbol A
:
With guide post
B
:
Without guide post
Number of contacts
Signal/Ground:60/6,
80/8, 100/10
Signal: 80, 100
Type without ground
Type with ground plate
Connector type
P
:
Header
S
:
Receptacle
Contact form SV
:
Straight SMT
Product height
Blank: Standard
0.5 : Standard + 0.5mm
Blank, (71): Tray packaging (Without pick-and-place tape)
(21),(91): Embossed tape packaging (Without pick-and-place tape)
(22),(92): Embossed tape packaging (With pick-and-place tape)
1 4
5
6
7
2
3
Rating
Rated current
Rated voltage
0.3 A (Note 1)
50 V AC
Operating temperature range
Operating humidity range
-55 to 85ç
Relative humidity 95% or less
(No condensation)
Storage temperature range
Storage humidity range
-10 to +60ç (Note 2)
-40 to -70% (Note 2)
Part
Insulator
Contacts
Ground plate
Metal fitting
Metal plate
Material
LCP
Copper alloy
Phosphor bronze
Phosphor bronze
Phosphor bronze
Finish
Beige
Header
Engagement Area: Gold plating of 0.1µm
Termination Area
: Flash platingReceptacle
Tin plating
Tin plating
Remarks
UL94V-0
----------
----------
----------
----------
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions,
10 cycles each
Acceleration of 490 m/s
2
, 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
Temperature: -55
ç
→15 to 35
ç
→85
ç
→15 to 35
ç
Time: 30 min. →2 to 3 min. →30 min. →2 to 3 min. for 5 cycles
50 times
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
100 Mø or greater
No flashover or breakdown
70 mø or less
No electrical discontinuity for 1µs or greater
No damage, cracks, or parts looseness
No electrical discontinuity for 1µs or longer
No damage, cracks, or parts looseness
Contact resistance of 80 m
ø
or less, insulation resistance of
100 M
ø
or greater, no damage, cracks, or parts looseness
Contact resistance of 80 m
ø
or less, insulation resistance of
100 M
ø
or greater, no damage, cracks, or parts looseness
Contact resistance of 80 mø or less
No damage, cracks, or parts looseness
No melting of resin portion which affects performance
1. Insulation resistance
2. Voltage proof
3. Contact resistance
Item Requirements Conditions
4. Vibration
5. Shock
6. Damp heat
(Steady state)
8. Durability
9. Resistance to
soldering heat
7. Temperature cycle
FX11 ##-ππP / ππ- SV 0.5 (✽ ✽)
1 74
3
2 5 6
FX11 ##-ππP - SV 0.5 (✽ ✽)
1
Type With Ground Plate
Type Without Ground Plate
742 63 5
10
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header with ground plate
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
5.25±0.3
2.13 ±0.3(0.6) 1.2±0.2
(0.5)
(0.75)(
0.75)
2-( Ø0.8 ) Guidepost
C±0.3
(6)
A±0.2
B±0.2
D±0.1
5.05±0.2
0.5±0.05
0.2±0.05
2
4
3
4
3
1
Ø1±0.05
Ø0.9 ±0.05
2.25 0
-0.1
0
-0.1
0
-0.1
D±0.05
0.5 ±0.03
A±0.05
1.8 +0.1
0
0.25 ±0.05
3±0.05 B±0.05
3.85
2.95
5.65 +0.1
0
0.6±0.03(Metal mask)
0.7 ±0.03
(Land) 0.3±0.03(Land)
0.25±0.03(Metal mask)
0.75±0.03
6±0.05
0.75±0.03
6.7 min
F min
C+0.1
0
E 0
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
4
Recommended metal mask thickness: 0.15 mm
CL No.
573-0502-0-71
573-0503-2-71
573-0504-5-71
573-0512-3-71
573-0513-6-71
573-0514-9-71
Part Number
FX11A- 60P/06-SV(71)
FX11A- 80P/08-SV(71)
FX11A-100P/10-SV(71)
FX11B- 60P/06-SV(71)
FX11B- 80P/08-SV(71)
FX11B-100P/10-SV(71)
Number of contacts
Signal Ground
60
80
100
60
80
100
6
8
10
6
8
10
A
17.5
23.5
29.5
17.5
23.5
29.5
12
18
24
12
18
24
22.6
28.6
34.6
22.6
28.6
34.6
18
24
30
----------
----------
----------
19.4
25.4
31.4
19.4
25.4
31.4
25.5
31.5
37.5
25.5
31.5
37.5
B C D E F Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 2.5mm stacking height
11
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header with ground plate
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
(6)
(0.75)(0.75)
A±0.2
B±0.2
5.05±0.2
0.5±0.05
0.2±0.05
Guidepost
C±0.3
D±0.1
5.25±0.3
1.2±0.2
(0.6) 2.63±0.3
(0.5)
2-(Ø0.8)
6±0.05
0.75±0.03 0.75±0.03
6.7 min
C+0.1
0
E 0
-0.1
2
4
3
4
3
1
Ø1±0.05
Ø0.9 ±0.05
2.25 0
-0.1
0
-0.1
0
-0.1
D±0.05
Fmin
0.5±0.03
A±0.05
1.8 +0.1
0
0.25±0.05
3 ±0.05 B±0.05
3.85
2.95
5.65 +0.1
0
0.6±0.03(Metal mask)
0.7±0.03
(Land) 0.3±0.03 (Land)
0.25±0.03(Metal mask)
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
4
Recommended metal mask thickness: 0.15 mm
CL No.
573-0602-4-71
573-0603-7-71
573-0604-0-71
573-0612-8-71
573-0613-0-71
573-0614-3-71
Part Number
FX11A- 60P/ 6-SV0.5(71)
FX11A- 80P/ 8-SV0.5(71)
FX11A-100P/10-SV0.5(71)
FX11B- 60P/ 6-SV0.5(71)
FX11B- 80P/ 8-SV0.5(71)
FX11B-100P/10-SV0.5(71)
Number of contacts
Signal Ground
60
80
100
60
80
100
6
8
10
6
8
10
A
17.5
23.5
29.5
17.5
23.5
29.5
12
18
24
12
18
24
22.6
28.6
34.6
22.6
28.6
34.6
18
24
30
----------
----------
----------
19.4
25.4
31.4
19.4
25.4
31.4
25.5
31.5
37.5
25.5
31.5
37.5
B C D E F Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 3mm stacking height
12
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Receptacle with ground plate
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
(71): Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
(6)
A±0.2
C±0.3
D±0.1
2-(Ø0.8)
B±0.2
Guidepost
(0.5) 0.5±0.05
0.2±0.05
1.2±0.2
6±0.2
6.2±0.3
(0.75)(0.75)
(0.6) 2.1±0.3
E+0.1
0
F
0
-0.1
D±0.05
A±0.05
B±0.05
6±0.05
0.75±0.03
0.75±0.03
Ø1±0.05
Ø0.9±0.05
2.2
0
-0.1
0.5±0.03
1.8 +0.1
0
4.4±0.05
0.3±0.03
(Land)
0.7±0.03(Land)
0.6±0.03(Metal mask)
0.25±0.03
(Metal mask)
4.8
0
-0.1
4
0
-0.1
6.6 +0.1
0
1.65±0.05
44
3
2
Recommended metal mask thickness: 0.15 mm
CL No.
573-0702-9-71
573-0703-1-71
573-0704-4-71
573-0712-2-71
573-0713-5-71
573-0714-8-71
Part Number
FX11A- 60S/ 6-SV(71)
FX11A- 80S/ 8-SV(71)
FX11A-100S/10-SV(71)
FX11B- 60S/ 6-SV(71)
FX11B- 80S/ 8-SV(71)
FX11B-100S/10-SV(71)
Number of contacts
Signal Ground
60
80
100
60
80
100
6
8
10
6
8
10
A
17.5
23.5
29.5
17.5
23.5
29.5
12
18
24
12
18
24
25
31
37
25
31
37
20.8
26.8
32.8
----------
----------
----------
25.4
31.4
37.4
25.4
31.4
37.4
22.2
28.2
34.2
22.2
28.2
34.2
B C D E F Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 2.5mm, 3mm stacking height
Note Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, totaling 2 places, indicate the metal fittings.
The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
3
4
13
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header without ground Plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
0.2±0.05
A±0.2
(0.5)
1.2±0.2
5.25±0.3
5.05±0.2
B±0.3
C±0.1
Guidepost
2-(Ø0.8)
(0.6) 2.13±0.3
B+0.1
0
D
0
-0.1
C±0.05
A±0.05
6.7min
E min
0.3(Land)
Ø1±0.05
Ø0.9±0.05
2.25
0
-0.1
0.5±0.03
1.8 +0.1
0
0.25±0.05
0.25±0.03(Metal mask)
3.85
0
-0.1
5.65 +0.1
0
2
2
3
1
3
Recommended metal mask thickness: 0.15 mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
CL No.
573-0548-0-**
573-0543-7-**
573-0558-4-**
573-0553-0-**
Part Number
FX11A- 80P-SV(**)
FX11A-100P-SV(**)
FX11B- 80P-SV(**)
FX11B-100P-SV(**)
Number of contacts
Signal
80
100
80
100
A
19.5
24.5
19.5
24.5
24.6
29.6
24.6
29.6
20
25
----------
----------
21.4
26.4
21.4
26.4
27.5
32.5
27.5
32.5
B C D E Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 2.5mm stacking height
14
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Header without ground Plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
0.2±0.05
A±0.2
(0.5)
1.2±0.2
5.25±0.3
5.05±0.2
B±0.3
C±0.1
Guidepost
2-(Ø0.8)
(0.6) 2.13±0.3
B+0.1
0
D
0
-0.1
C±0.05
A±0.05
6.7min
E min
0.3(Land)
Ø1±0.05
Ø0.9±0.05
2.25
0
-0.1
0.5±0.03
1.8 +0.1
0
0.25±0.05
0.25±0.03(Metal mask)
3.85
0
-0.1
5.65 +0.1
0
2
2
3
1
3
Recommended metal mask thickness: 0.15 mm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
CL No.
573-0648-5-**
573-0643-1-**
573-0658-9-**
573-0653-5-**
Part Number
FX11A- 80P-SV0.5(**)
FX11A-100P-SV0.5(**)
FX11B- 80P-SV0.5(**)
FX11B-100P-SV0.5(**)
Number of contacts
Signal
80
100
80
100
A
19.5
24.5
19.5
24.5
24.6
29.6
24.6
29.6
20
25
----------
----------
21.4
26.4
21.4
26.4
27.5
32.5
27.5
32.5
B C D E Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 3mm stacking height
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
1
2
3
15
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
■Receptacle without ground plate
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
A±0.2
B±0.3
0.2 ±0.05
C±0.1
( 0.5 )
6.2 ±0.3
1.2 ±0.2
2-( Ø0.8 )
6±0.2
Guidepost
(0.6) 2.1±0.3
C±0.05
2.2 0
-0.1
1.65±0.05
A±0.05
E 0
-0.1
D
+0.1
0
1.8 +0.1
0
Ø1±0.05
0.5±0.03
0.3±0.03 (Land)
4.8 0
-0.1
6.6 +0.1
0
0.25±0.03(Metal mask)
Ø0.9 ±0.05
1
2
2
Recommended metal mask thickness: 0.15 mm
Note The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
1
2
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
CL No.
573-0748-0-**
573-0743-6-**
573-0758-3-**
573-0753-0-**
Part Number
FX11A- 80S-SV(**)
FX11A-100S-SV(**)
FX11B- 80S-SV(**)
FX11B-100S-SV(**)
Number of contacts
Signal
80
100
80
100
A
19.5
24.5
19.5
24.5
27
32
27
32
22.8
27.8
----------
----------
27.4
32.4
27.4
32.4
24.2
29.2
24.2
29.2
B C D E Remarks RoHS
With guideposts
Without guideposts
YES
Unit : mm
● 2.5mm, 3mm stacking height
16
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
20.2
26.2
20.2
26.2
20.2
40.4
52.4
40.4
52.4
40.4
44
56
44
56
44
45.5
59
45.5
59
45.5
50.5
64
50.5
64
50.5
1.98
2.48
2.98
26.2
20.2
20.2
26.2
20.2
52.4
40.4
40.4
52.4
40.4
56
44
44
56
44
59
45.5
45.5
59
45.5
64
50.5
50.5
64
50.5
A B C D E F
Unit : mm
Insertion Connector
FX11L#- 60P/ 6 -SV
FX11L#- 80P/ 8 -SV
FX11L#-100P/10-SV
FX11L#-120P/12-SV
FX11L#- 68P -SV
FX11L#- 92P -SV
FX11L#-116P -SV
FX11L#-140P -SV
FX11 #- 60P/ 6 -SV
FX11 #- 80P/ 8 -SV
FX11 #-100P/10-SV
FX11 #- 80P -SV
FX11 #-100P -SV
FX11 #- 60P/ 6 -SV0.5
FX11 #- 80P/ 8 -SV0.5
FX11 #-100P/10-SV0.5
FX11 #- 80P -SV0.5
FX11 #-100P -SV0.5
BEmbossed Carrier Tape Dimensions
Note 1: There is no polarity in terms of embossed tape packaging for
this product.
Note 2: Left figure is representative of products with ground plates.
20.2
26.2
20.2
26.2
20.2
40.4
52.4
40.4
52.4
40.4
44
56
44
56
44
45.5
59
45.5
59
45.5
50.5
64
50.5
64
50.5
2
2.4526.2
20.2
52.4
40.4
56
44
59
45.5
64
50.5
A B C D E F
Unit : mm
Insertion Connector
FX11L#- 60S/ 6 -SV
FX11L#- 80S/ 8 -SV
FX11L#-100S/10-SV
FX11L#-120S/12-SV
FX11L#- 68S -SV
FX11L#- 92S -SV
FX11L#-116S -SV
FX11L#-140S -SV
FX11 #- 60S/ 6 -SV
FX11 #- 80S/ 8 -SV
FX11 #-100S/10-SV
FX11 #- 80S -SV
FX11 #-100S -SV
Note 1: There is no polarity in terms of embossed tape packaging for
this product.
Note 2: Left figure is representative of products with ground plates.
●Header
Unreeling direction
A±0.1 1.75 ±0.1
B±0.1
C±0.3
Ø1.5+0.1
0
±0.12 ±0.1
12±0.1
(0.4)
(F)(
0.9 )
R0.75+0.05
0
0.2 ±0.05
4
●Receptacle
Unreeling direction
A±0.1 1.75 ±0.1
B±0.1
C±0.3
Ø1.5 +0.1
0
4 ±0.12 ±0.1
12±0.1 ( 0.9)(F)
( 0.4)
R0.75+0.05
0
0.2 ±0.05
●Reel Dimensions
Ø13±0.5
(Ø330)
(Ø80)
(D)
(E)
17
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
BRecommended Temperature Profile
BWashing Conditions
BConnector Handling Precautions
1. Allowable Creepage Dimensions at Time of Mating
2. Compatibility
2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other.
3. Retension of Boards
Avoid the support of boards by connectors alone and adopt a board locking measure that does not rely on the connectors.
4. Solder Repair
Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair.
This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into
consideration prior to connector washing.
5. Miscellaneous
·
Note that excessive twisting while inserting or withdrawing connectors will cause damage.
·
The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance.
Water Type Washing
When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the
documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Washing Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the
deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed.
Organic Solvent Washing
Solvent
Room temperature washing
Heated washing
IPA(Isopropyl alcohol)
HCFC(Hydrochlorofluorocarbon) Yes
Yes Yes
Yes
HRS test conditions
Test boardGlass epoxy 60mm∞35mm∞1.6mm thick
Solder method : Reflow
Solder composition : Paste,96.5%Sn/ 3%Ag/ 0.5%Cu
Metal mask : 0.15mm thick
Reflow cycles : 2 cycles
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and
board size/thickness. Consult your solder paste and
equipment manufacturer for specific recommendations.
Note : The temperature profile indicates the maximum temperature
of the connector surfaces at the highest point from the PCB
mounting surface.
Temperature (ç)
150ç
200ç
220ç
Soldering
(220ç min)
140
180
220
0
160
200
(MAX250ç)
240
260
(90 to 120 sec.)
(60 sec. max.)
Preheating(150 to 200ç)
Time(sec.)
[Stacking height : 2mm]
The effective coupling length of this product is 0.55 mm for
the signal portion and the ground portion. The creepage of
the header and receptacle at the time of mating should be
within 0.18 mm of the completely coupled condition.
[Stacking height : 2.5mm, 3mm]
The effective coupling length of this product is 1 mm for the
signal portion and 0.7mm for the ground portion. The creepage
of the header and receptacle at the time of mating should be
within 0.4 mm of the completely coupled condition.
18
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
NOTES :
19
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
NOTES :
20
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 01/2013. Contents are subject to change without notice for the purpose of improvements.
USA:
HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
20400 Stevens Creek Blvd., Ste 250, Cupertino,
CA 95014
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hiroseusa.com
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose-hongkong.com.hk
CHINA:
HIROSE ELECTRIC
(SHANGHAI)
CO., LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose-china.com.cn
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose-taiwan.com.tw
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.de
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No.03, Ground Floor, Explorer Building International Tech
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hiroseeurope.com
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : +44-1908-369060
Fax : +44-1908-369078
http://www.hirose.co.uk
USA:
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
37677 Professional Center Drive, Suite #100C
Livonia, MI 48154
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hiroseusa.com
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601,Henderson Metropolitan,NO.300 ,East Nanjing
Road,Huangpu District, Shanghai,China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose-china.com.cn
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®