U.S. GAUGE PMT PRODUCTS PRESSURE TRANSDUCERS BULLETIN DB-IPT PART #K796410 Model IPT Industrial Pressure Transducer F E AT U R E S 0.3% accuracy Excellent stability Solid state/industrial grade Temperature compensated Stainless steel pressure connection for maximum media compatibility Rugged Ultem1 housing provides outstanding corrosion resistance Pressure ranges up to 500 psig MODEL IPT TRANSDUCER MV, voltage or 4 to 20 mA output available Vacuum and compound pressure ranges available Low cost 1 TM General Electric Co. A P P L I C AT I O N S Refrigeration Compressors Pumps Hydraulic systems Pressure instrumentation Engine monitoring/control Engine testing Pneumatic systems Flow control EFFECTIVE: 1/00 DESCRIPTION The Model IPT general purpose industrial pressure transducer is designed for use in a variety of industries. Providing excellent media compatibility, stability, low cost and proven reliability, it is ideal for OEM applications. This model provides three input/output options (0 to 100 mV, 1 to 5 VDC or 4 to 20 mA). Each unit is shipped fully compensated for pressure and temperature and is completely interchangeable without the need for further calibration. The IPT features a solid state silicon piezoresistive sensing element, electrostatically bonded to a glass pedestal to virtually eliminate the effects of induced stress and vibration. The transducer has a computer-controlled laser trimmed custom hybrid circuit which standardizes output and provides precise temperature and pressure compensation. Rugged construction and a standard 18 inch (45 cm) cable make it truly cost effective. SUPERSEDES: 5/96 U.S. GAUGE * PMT PRODUCTS 820 Pennsylvania Blvd., Feasterville, PA 19053 U.S.A. * TEL: (215) 355-6900 * FAX: (215) 355-2937 * www.ametekusg.com Model IPT Industrial Pressure Transducer S P E C I F I C AT I O N S PRESSURE RANGE1 Vacuum to 0 to 500 psig MAXIMUM OVERPRESSURE 2 times full scale or 750 psig, whichever is less BURST PRESSURE (AT 25O C) 3 times full scale or 750 psig, whichever is less OUTPUT 0-100 MV 1-5 VDC EXCITATION 4-20 mA 10 VDC 12-25 VDC 12-25 VDC NULL OFFSET (AT 25O C) +1.0% SPAN 0 MV 1.0 VDC 4.0 mA SPAN (AT 25O C) +1.0% SPAN 100 MV 4.0 VDC 16.0 mA SHOCK3 100 g VIBRATION 10 g, 100 to 2000 Hz4 WEIGHT 50 grams ELECTRICAL TERMINATIONS #20 AWG Shielded wire/18 inches long WETTED PARTS Fluorosilicone, silicone, Pyrex glass, 303 stainless steel HUMIDITY Passes MIL-STD-202F Method 103B, Condition A ACCURACY +0.3% span from best fit straight line including non-linearity repeatability and hysteresis OPERATING TEMPERATURE RANGE -40O C to 105O C COMPENSATED TEMPERATURE RANGE -5O C to 55O C THERMAL EFFECT ON ZERO (NULL)2 +0.5% span (typical) over compensated temperature range, +2.0% maximum THERMAL EFFECT ON SPAN2 +0.5% span (typical) over compensated temperature range, +2.0% maximum RESPONSE TIME Less than 5 milliseconds STABILITY +0.25% span/year 1. For availability of other pressure ranges, consult factory. 2. Temperature error is calculated with respect to 25O C and expresses the deviation that could occur as temperature is raised or lowered to limits indicated. 3. MIL-STD-202F, Method 213B, 1/2 Sine, Condition D. 4. MIL-STD-202F, Method 204C, Condition C, Parts 1 & 2. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE O R D E R I N G I N F O R M AT I O N DIMENSIONS MODEL NUMBER IPT G 0060 D S FS IN (MM) Example: IPT G 0060 D S FS Model IPT Industrial Pressure Transducer gauge, 0 to 60 psig range with a 12 to 25 VDC input/1 to 5 VDC output, stainless steel port and fluorosilicone O ring MODEL IPT = Pressure Transducer TYPE C = Compound G = Gauge V = Vacuum RANGES1 0015 = 0 to 15 psig 0030 = 0 to 30 psig 0060 = 0 to 60 psig 0100 = 0 to 100 psig 0200 = 0 to 200 psig 0300 = 0 to 300 psig 0500 = 0 to 500 psig INPUT/OUTPUT A = 10 VDC/0 to 100 mV B = 12 to 25 VDC/4 to 20 mA D = 12 to 25 VDC/1 to 5 VDC PRESSURE PORT S = Stainless Steel O RING FS = Fluorosilicone (Standard)* * Fluorosilicone is not suitable for all media, contact factory for assistance when specifying O ring material. 2.55 (64.8) 18.0 LG (457.2) #20 AWG SHIELDED WIRE 7/16 HEX (11.1) 1/8-27 NPT 1.79 (45.3) 1.48 (37.6) .74 (18.7) 1.41 (35.8) O .12 (3.0) 4 HOLES WIRE LEGEND MV VDC MA RED +VIN +VIN +VIN BLACK -VIN -VIN -VIN WHITE -S +E N/A GREEN +S N/A N/A U.S. GAUGE * PMT PRODUCTS 820 PENNSYLVANIA BLVD., FEASTERVILLE, PENNSYLVANIA 19053 U.S.A. TEL: (215) 355-6900 * FAX: (215) 355-2937 * www.ametekusg.com (c) 2000, by AMETEK, Inc. All rights reserved. 2.5M100L (110055) 1.0 (25.4) 1.0 (25.4) 1.5 (38.1)