SOGC 45, 46 Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount FEATURES * TTL/ECL translator schematics available and signal terminator * 0.110" (2.79) maximum seated height * Rugged, molded case construction * 0.050" (1.27) lead spacing * Reduces total assembly costs * Compatible with automatic surface mounting equipment * Uniform performance characteristics * Meets EIA PDP 100, SOGN-0003 outline dimensions * Available in tube pack or tape and reel pack * Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS POWER RATING GLOBAL MODEL CIRCUIT SCHEMATIC ELEMENT P70 C W PACKAGE P70 C W TOLERANCE % RESISTANCE VALUES MAXIMUM WORKING VOLTAGE (1) VDC TEMPERATURE COEFFICIENT ppm/C 45 0.1 1.6 2 180, 270, 820 50 100 46 0.1 1.6 2 330, 150, 330 50 100 45 0.1 2.0 2 180, 270, 820 50 100 46 0.1 2.0 2 330, 150, 330 50 100 SOGC16 SOGC20 Note (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER Package power rating (maximum at + 70 C) UNIT S0GC16 W 1.6 SOGC20 2.0 TCR tracking (- 55 C to + 125 C) ppm/C 50 Voltage coefficient of resistance ppm/V < 50 typical Maximum operating voltage VDC 50 Operating temperature range C - 55 to + 125 Storage temperature range C - 55 to + 150 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SOGC1646DC (preferred part numbering format) S GLOBAL MODEL O G C 1 6 PIN COUNT SOGC 16 20 4 6 D C SCHEMATIC PACKAGING SPECIAL 45 = TTL/ECL translator 46 = SIGNAL terminator EJ = Lead (Pb)-free, tube EA = Lead (Pb)-free, tape and reel Blank = Standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable DC = Tin/lead, tube RZ = Tin/lead, tape and reel Historical Part Number Example: SOGC1646 (will continue to be accepted) SOGC 16 46 D02 HISTORICAL MODEL PIN COUNT SCHEMATIC PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 410 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31507 Revision: 27-Apr-10 SOGC 45, 46 Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount Vishay Dale MECHANICAL SPECIFICATIONS Marking Model number, schematic number, value, tolerance, pin 1 indicator, date code Marking resistance to solvents Permanency testing per MIL-STD-202, method 215 Maximum solder reflow temperature + 255 C Solderability Per MIL-STD-202, method 208E Terminals Copper alloy. Solder dipped terminal Body Molded epoxy DIMENSIONS in inches (millimeters) B 0.105 (2.67) 0.050 (1.27) Non-Accum. Typ. 0.018 (0.457) Typ. 0.010 0.005 (0.254 0.127) 0.100 (2.54) 0.406 0.012 (10.31 0.305) 0.295 (7.49) SOGC 0.006 (0.152) Max. Typ. Pin 1 0.045 (1.14) 0.045 (1.14) Ref. A 0.028 0.010 (0.711 0.254) Typ. 0.008 (0.203) A B SOGC16 GLOBAL MODEL 0.440 (11.18) 0.350 (8.89) SOGC20 0.540 (13.72) 0.450 (11.43) CIRCUIT APPLICATIONS 45 Schematic VCC TTL Inputs 180 270 820 Pin 1 VCC Outputs to ECL TTL to ECL translator The SOGCxx45 network consists of resistors of 3 different values, internally divided into 6 or 8 identical three (3) resistor sections for TTL to ECL translation. VEE 46 Schematic 330 150 330 SCSI-BUS signal terminator The SOGCxx46 network consists of resistors of 2 different values, internally divided into 7 or 9 identical three (3) resistor sections for SCSI-BUS terminator applications. Pin 1 Document Number: 31507 Revision: 27-Apr-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 411 SOGC 45, 46 Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface Mount Power Rating (W) SOGC20 Pkg. 2.0 SOGC16 Pkg. 1.6 1.0 Single Resistor 0.10 0.50 Derating 0 + 25 + 70 + 125 + 150 Ambient Temperature C PERFORMANCE TEST MAX. R (TYPICAL TEST LOTS) Power conditioning 0.50 % R Thermal shock 0.50 % R Short time overload 0.25 % R Low temperature operation 0.25 % R Moisture resistance 0.50 % R Resistance to soldering heat 0.25 % R Shock 0.25 % R Vibration 0.25 % R Load life 0.50 % R 0.25 % R Terminal strength Insulation resistance Dielectric withstanding voltage 10 000 M (minimum) No evidence of arcing or damage (200 VRMS for 1 min) Note * Test methods per MIL-STD-202. www.vishay.com 412 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31507 Revision: 27-Apr-10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1