SOGC 45, 46
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line, Wide Body,
Small Outline, Molded DIP, Surface Mount
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31507
410 Revision: 27-Apr-10
FEATURES
•TTL/ECL translator and signal terminator
schematics available
•0.110" (2.79) maximum seated height
•Rugged, molded case construction
•0.050" (1.27) lead spacing
•Reduces total assembly costs
•Compatible with automatic surface mounting equipment
•Uniform performance characteristics
•Meets EIA PDP 100, SOGN-0003 outline dimensions
•Available in tube pack or tape and reel pack
•Compliant to RoHS directive 2002/95/EC
Note
(1) Continuous working voltage shall be or maximum working voltage, whichever is less.
* Pb containing terminations are not RoHS compliant, exemptions may apply
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
CIRCUIT
SCHEMATIC
POWER RATING
TOLERANCE
± %
RESISTANCE
VALUES
Ω
MAXIMUM
WORKING
VOLTAGE (1)
VDC
TEMPERATURE
COEFFICIENT
± ppm/°C
ELEMENT
P70 °C
W
PAC K AG E
P70 °C
W
SOGC16 45 0.1 1.6 2 180, 270, 820 50 100
46 0.1 1.6 2 330, 150, 330 50 100
SOGC20 45 0.1 2.0 2 180, 270, 820 50 100
46 0.1 2.0 2 330, 150, 330 50 100
TECHNICAL SPECIFICATIONS
PARAMETER UNIT S0GC16 SOGC20
Package power rating (maximum at + 70 °C) W 1.6 2.0
TCR tracking (- 55 °C to + 125 °C) ppm/°C ± 50
Voltage coefficient of resistance ppm/V < 50 typical
Maximum operating voltage VDC 50
Operating temperature range °C - 55 to + 125
Storage temperature range °C - 55 to + 150
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: SOGC1646DC (preferred part numbering format)
GLOBAL MODEL PIN COUNT SCHEMATIC PACKAGING SPECIAL
SOGC 16
20
45 = TTL/ECL translator
46 = SIGNAL terminator
EJ = Lead (Pb)-free, tube
EA = Lead (Pb)-free,
tape and reel
DC = Tin/lead, tube
RZ = Tin/lead, tape and reel
Blank = Standard
(Dash number)
(Up to 3 digits)
From 1 to 999 as
applicable
Historical Part Number Example: SOGC1646 (will continue to be accepted)
SOGC 16 46 D02
HISTORICAL MODEL PIN COUNT SCHEMATIC PACKAGING
P x R
GC1 6 6DC4SO
Document Number: 31507 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 27-Apr-10 411
SOGC 45, 46
Thick Film Resistor Networks, Dual-In-Line, Wide Body,
Small Outline, Molded DIP, Surface Mount Vishay Dale
DIMENSIONS in inches (millimeters)
MECHANICAL SPECIFICATIONS
Marking Model number, schematic number, value, tolerance, pin 1 indicator, date code
Marking resistance to solvents Permanency testing per MIL-STD-202, method 215
Maximum solder reflow temperature + 255 °C
Solderability Per MIL-STD-202, method 208E
Terminals Copper alloy. Solder dipped terminal
Body Molded epoxy
0.105
(2.67)
0.100 (2.54)
0.010 ± 0.005
(0.254 ± 0.127)
0.406 ± 0.012 ± 0.012
(10.31 ± 0.305)
0.028 ± 0.010
(0.711 ± 0.254) Typ.
0.008
(0.203)
0.295
(7.49)
0.045 (1.14)
Ref.
Pin 1
0.045
(1.14) A
0.050 (1.27)
Non-Accum. T yp.
0.018 (0.457) Typ.
B
SOGC
0.006 (0.152) Max. Typ.
GLOBAL MODEL
AB
SOGC16 0.440 (11.18) 0.350 (8.89)
SOGC20 0.540 (13.72) 0.450 (11.43)
CIRCUIT APPLICATIONS
45 Schematic
TTL to ECL translator
The SOGCxx45 network consists of resistors of 3 different
values, internally divided into 6 or 8 identical three (3) resistor
sections for TTL to ECL translation.
46 Schematic
SCSI-BUS signal terminator
The SOGCxx46 network consists of resistors of 2 different
values, internally divided into 7 or 9 identical three (3) resistor
sections for SCSI-BUS terminator applications.
Outputs to ECL
TTL Inputs
180 Ω
270 Ω
820 Ω
VEE
VCC
VCC
Pin 1
Pin 1
330 Ω
150 Ω
330 Ω
SOGC 45, 46
Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Wide Body,
Small Outline, Molded DIP, Surface Mount
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31507
412 Revision: 27-Apr-10
Note
• Test methods per MIL-STD-202.
Ambient Temperature °C
2.0
1.6
1.0
0.10
Single Resistor
SOGC20 Pkg.
SOGC16 Pkg.
Derating
Power Rating (W)
0.50 0 + 25 + 70 + 125 + 150
PERFORMANCE
TEST MAX. ΔR
(TYPICAL TEST LOTS)
Power conditioning ± 0.50 % ΔR
Thermal shock ± 0.50 % ΔR
Short time overload ± 0.25 % ΔR
Low temperature operation ± 0.25 % ΔR
Moisture resistance ± 0.50 % ΔR
Resistance to soldering heat ± 0.25 % ΔR
Shock ± 0.25 % ΔR
Vibration ± 0.25 % ΔR
Load life ± 0.50 % ΔR
Terminal strength ± 0.25 % ΔR
Insulation resistance 10 000 MΩ (minimum)
Dielectric withstanding voltage No evidence of arcing or damage
(200 VRMS for 1 min)
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
