TCN
www.vishay.com Vishay Techno
Revision: 14-Jan-13 1Document Number: 68003
For technical questions, contact: te1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thick Film Capacitor Networks,
Single-In-Line, Conformal Coated SIP
FEATURES
• Isolated and bussed schematics available
• NP0 or X7R capacitors for line terminator
• Wide operating temperature range (- 55 °C to
125 °C)
• Epoxy based conformal coating
• Solder coated copper terminals
• Solderability per MIL-STD-202 method 208E
• Marking resistance to solvents per MIL-STD-202 method
215
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
*Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
Notes
(1) NP0 capacitors may be substituted for X7R capacitors.
(2) Tighter tolerances available on request.
Note
• For additional information on packaging, refer to the Through-hole Network Packaging document (www.vishay.com/doc?31542).
STANDARD ELECTRICAL SPECIFICATIONS
MODEL SCHEMATIC CAPACITANCE RANGE CAPACITANCE TOLERANCE (2)
± %
CAPACITANCE VOLTAGE
VDC
NP0 (1) X7R
TCN
01 33 pF to 3900 pF 470 pF to 0.1 μF 10, 20 50
02 33 pF to 3900 pF 470 pF to 0.1 μF 10, 20 50
09 33 pF to 3900 pF 470 pF to 0.1 μF 10, 20 50
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TCN0801N101KTB (preferred part number format)
GLOBAL
MODEL PIN COUNT SCHEMATIC CHARACTERISTICS CAPACITANCE
VALUE TOLERANCE TERMINAL FINISH PACKAGING
TCN 06 to 12 pin
available
06 = 6 pin
08 = 8 pin
12 = 12 pin
01
02
09
N = NP0
X = X7R
(In picofarads)
2 digit significant figure,
followed by a multiplier
101 = 100 pF
392 = 3000 pF
104 = 0.1 μF
K = 10 %
M = 20 %
T = Sn90/Pb10
C = Sn95.5/
Ag3.9/
Cu0.6
B = Bulk
Historical Part Numbering: TCN0801101KS10 (will continue to be accepted)
TCN 08 01 101 K S10
HISTORICAL
MODEL PIN COUNT SCHEMATIC CAPACITANCE
VALUE TOLERANCE TERMINAL FINISH
0801 10NCN 1KTBT
TCN
www.vishay.com Vishay Techno
Revision: 14-Jan-13 2Document Number: 68003
For technical questions, contact: te1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Custom schematics available.
SCHEMATICS
Schematic 01 Schematic 02 Schematic 09
DIMENSIONS in inches (millimeters)
NUMBER OF PINS A
(Max.)
B
± 0.005 (0.127)
C
(Max.)
6 0.590 (14.99) 0.500 (12.70) 0.350 (8.89)
7 0.690 (17.53) 0.600 (15.24) 0.350 (8.89)
8 0.790 (20.07) 0.700 (17.78) 0.350 (8.89)
9 0.890 (22.61) 0.800 (20.32) 0.350 (8.89)
10 0.990 (25.15) 0.900 (22.86) 0.350 (8.89)
11 1.09 (27.69) 1.00 (25.40) 0.350 (8.89)
12 1.19 (30.23) 1.10 (27.94) 0.350 (8.89)
nn-14321
CCC C C
nn-14321
CC C
1nn-1432
CCC C
0.130
(3.30)
Max.
0.010 0.002
(0.254 0.051)
(Seating
Plane)
0.020 0.002
(0.508 0.051)
0.125 0.015
(3.18 0 .381)
C
Max.
A Max.
B
Pin #1 Identifier
±
±
±
±
±
±
0.100 ± 0.005
(2.54 ± 0.127)
Non-Cumulative
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
