Features
n Small package dimensions
n RoHS compliant*
n Power rating at 70 °C = 1/16 W
n Tight dimensional tolerances
n Three layer termination process with
nickel barrier prevents leaching and
provides excellent solderability
n Suitable for most types of soldering
processes
n Standard packaging on paper tape and reel
CR0402 - Chip Resistor
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Electrical Characteristics
Power Rating @ 70 °C ................1/16 W
Operating Temperature Range
................................-55 °C to +155 °C
Derated to 0 Load at .................. +155 °C
Maximum Working Voltage ..............50 V
Maximum Overload Voltage ..........100 V
Resistance Range
1 %, E-96
and E-24 ...... 10 ohms to 10 megohms
5 %, E-24 ........ 1 ohm to 20 megohms
Zero Ohm Jumper ............ <0.05 ohms
Temperature Coefcient
1 % ........10 Ω ≤ R ≤ 1 MΩ ±100 ppm/℃
1 MΩ < R ≤ 10 MΩ ±200 ppm/℃
5 % ......10 Ω ≤ R ≤ 10 MΩ ±200 ppm/℃
10 MΩ < R ≤ 20 MΩ ±400 ppm/℃
1 Ω ≤ R < 10 Ω -200 to +500 ppm/°C
AEC-Q200 ..................... Contact Bourns
to conrm availability
Derating Curve
Dimensional Drawings
DIMENSIONS: MM
(INCHES)
100
80
60
40
20
0
Rated Power (%)
Ambient Temperature (°C)
-55
07
0155
0.20 ± 0.10
(0.008 ± 0.004)
0.20 ± 0.10
(0.008 ± 0.004)
0.50 ± 0.05
(0.020 ± 0.002)
0.25 ± 0.10
(0.010 ± 0.004)
0.25 ± 0.10
(0.010 ± 0.004)
0.35 ± 0.05
(0.014 ± 0.002)
1.00 ± 0.10
(0.040 ± 0.004)
Overcoat
Resistor (Ru02)
(Jumper chip is
a conductor)
Alumina Substrate
Internal Electrode (Ag)
Secondary Electrode (Nickel Plated)
External Electrode
(tin-plated)
*RoHS COMPLIANT
LEAD FREE
*RoHS COMPLIANT
VERSIONS
AVAILABLE
LEAD FREE
VERSIONS ARE
RoHS COMPLIANT*
Standard Values
For Standard Values Used in Capac-
itors, Inductors, and Resistors, click
here.
Performance Characteristics
Test Procedure Method Test Limits DR
1 % 5 %
Thermal Shock -55 ℃ for 30 minutes, +155 ℃ for 30 minutes,
5 cycles IEC60115-1-4.19 ≤±(0.5 % + 0.05 Ω) ≤±(1 % + 0.05 Ω)
Short Time Overload 2.5 X rated voltage for 5 seconds IEC60115-1-4.13 ≤±(2 % + 0.1 Ω)
Resistance to Solder Heat 270 ±5 ℃ for 10 ±1 seconds IEC60115-1-4.18 ≤±(0.5 % + 0.05 Ω) ≤±(1 % + 0.05 Ω)
Resistance to Dry Heat 125 ±5 ℃ for 96 ±4 hours IEC60115-1-4.23.2 ≤±(1 % + 0.05 Ω) ≤±(2 % + 0.1 Ω)
Load Life Rated voltage for 1000 hours, 70 ℃,
1.5 hours “ON“, 0.5 hours “OFF” IEC60115-1-4.25.1 ≤±(3 % + 0.1 Ω)
Load Life with Humidity Rated voltage for 1000 hours, 40 ±2 ℃,
90~95 % RH, 1.5 hours “ON“, 0.5 hours “OFF” IEC60115-1-4.24 ≤±(3 % + 0.1 Ω)
Solderability 245 ±5 ℃, 2 ±0.5 seconds IEC60115-1-4.17 ≥95 % of area covered
Bending 3 mm IEC60115-1-4.33 ≤±(0.5 % + 0.05 Ω) ≤±(1 % + 0.05 Ω)
Dielectric Withstanding
Voltage -- IEC60115-1-4.7 >100 V
Insulation Resistance 100 V IEC60115-1-4.6 ≥1 GΩ
Part Marking System
No Marking on the CR0402 Chip
Resistors.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CR0402 - Chip Resistor
Soldering Prole for RoHS Compliant Chip Resistors and Arrays
Packaging Dimensions (Conforms to EIA RS-481A)
25
75
125
175
225
275
050 100 150 200 250 300
Time (seconds)
Temperature (°C)
60 - 120 seconds
60 - 90
seconds
260 °C peak
190 °C
150 °C
220 °C
Ramp Down
6 °C/second
255 °C
Maximum of 20 seconds between
+255 °C and +260 °C
Ramp Up
3 °C/second maximum
10 seconds minimum
<1>
<1>
1.5 + 0.1/-0
(0.059 + 0.004/-0)
4.0 ± 0.1
(0.157 ± 0.004)
0.65 ± 0.1
(0.026 ± 0.004)
1.15 ± 0.1
(0.045 ± 0.004)
2.0 ± 0.1
(0.079 ± 0.004)
0.45 ± 0.1
(0.018 ± 0.004)
Paper
(Punched)
3.5 ± 0.05
(0.138 ± 0.002)
1.75 ± 0.1
(0.069 ± 0.004)
8.0 ± 0.2
(0.315 ± 0.008)
Direction of Feeding
DIA.
20.5
(.807)
13.0 ± 0.5
(.512 ± .020)
2.0
(.080)
1.0 ± 0.2
(.040 ± .020)
10.0 ± 1.5
(.394 ± .059)
80.0 ± 1.0
(3.150 ± .040)
178.0 ± 2.0
(7.008 ± .080)
DIMENSIONS: MM
(INCHES)
REV. 11/16
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CR0402 - Chip Resistor
How to Order
CR 0402 - F X - 8252 G LF
Model
(CR = Chip Resistor)
Size
• 0402
Resistance Tolerance
F = ±1 % ..............Used with “X” TCR code only for values from 10 ohms through 1 megohm; and
Used with “W” TCR code only for values above 1 megohm. through 10 megohms.
J = ±5 % ............... Used with “W” TCR code for values from 10 ohms through 10 megohms;
Used with “Z” TCR code for values above 10 megohms through 20 megohms;
Used with “/” TCR code for zero ohm (jumper); and for values from 1 ohm through 9.1 ohms.
TCR (ppm/°C)
X = ±100
W = ±200
Z = ±400
/ = -200 to +500
Resistance Value
For 1 % Tolerance:
<100 ohms ...........“R” designates decimal point (example: 24R3 = 24.3 ohms)
≥100 ohms ............First three digits are signicant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k ohms).
For 5 % Tolerance:
<10 ohms .............“R” designates decimal point (example: 4R7 = 4.7 ohms)
≥10 ohms ..............First two digits are signicant, third digit represents number of zeros to follow (example: 474 = 470k ohms; 000 = Jumper).
Packaging
G = Paper Tape (10,000 pcs.) on 7 ” Plastic Reel
Termination
LF = Tin-plated (RoHS compliant)
