7977A Coax - Low Loss 50 Ohm Wireless RF Transmission Cable For more information please call 1-800-Belden1 See Put-ups and Colors Description: 5.5 AWG solid .176" bare copper-covered aluminum conductor, foam HDPE insulation, Duobond(R) II + tinned copper braid shield (85% coverage), polyethylene jacket. PHYSICAL CHARACTERISTICS: CONDUCTOR: Number of Coax 1 Total Number of Conductors 1 Series Type RF 600 AWG 5.5 Stranding Solid Conductor Diameter .176 in. Conductor Material BCCA - Bare Copper Covered Aluminum INSULATION: Insulation Material FHDPE - Foam High Density Polyethylene Insulation Diameter .455 in. OUTER SHIELD: Outer Shield Material Trade Name Duobond(R) II Outer Shield Type Tape/Braid Outer Shield Material : Layer Number 1 Trade Name Bonded Duofoil(R) Type Tape 2 Braid Outer Shield %Coverage 100 % Material % Coverage (%) Bonded Aluminum Foil100 Polyester Tape-Aluminum Foil TC - Tinned Copper 85 OUTER JACKET: Outer Jacket Material PE - Polyethylene OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .590 in. MECHANICAL CHARACTERISTICS: Page 1 of 4 7977A Coax - Low Loss 50 Ohm Wireless RF Transmission Cable Operating Temperature Range -40C To +80C Non-UL Temperature Rating 80C Bulk Cable Weight 163 lbs/1000 ft. Max. Recommended Pulling Tension 290 lbs. Min. Bend Radius (Install) 5.9 in. APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE: APPLICABLE STANDARDS: EU CE Mark (Y/N) No EU RoHS Compliant (Y/N) Yes EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2005 SUITABILITY: Suitability - Outdoor Yes Suitability - Aerial Yes - when supported by a messenger wire Suggested Connectors Land Mobile Radio type connectors. PLENUM/NON-PLENUM: Plenum (Y/N) N ELECTRICAL CHARACTERISTICS: Nom. Characteristic Impedance 50 Ohms Nom. Inductance 0.060 H/ft Nom. Capacitance Conductor to Shield 24.6 pF/ft Nominal Velocity of Propagation 85 % Nominal Delay 1.19 ns/ft Nom. Conductor DC Resistance @ 20 Deg. C .53 Ohms/1000 ft Nominal Outer Shield DC Resistance @ 20C 1.8 Ohms/1000 ft Maximum VSWR : Description Frequency (MHz) Start Frequency (MHz) 50 2400 5000 Nom. Attenuation : Page 2 of 4 Stop Frequency (MHz) 2400 2500 6000 Maximum VSWR 1.43:1 1.30:1 1.43:1 7977A Coax - Low Loss 50 Ohm Wireless RF Transmission Cable Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) Nom. Attenuation (dB/100 ft.) .46 .61 .98 1.18 1.72 2.54 3.40 3.77 4.01 4.58 5.07 5.56 6.44 7.56 7.75 Start Frequency (MHz) Stop Frequency (MHz) Max. Power Rating (W) 5057 1975 1353 921 691 623 587 425 368 315 309 30 50 150 220 450 900 1500 1800 2000 2500 3000 3500 4500 5800 6000 Max. Power Rating : Description Frequency (MHz) 30 220 450 900 1500 1800 2000 3500 4500 5800 6000 Max. Operating Voltage - Non-UL 300 V RMS NOTES: Notes 100% Sweep tested. Belden(R) The Wire in Wireless(R). PUT-UPS AND COLORS: Item Description 7977A 0101000 #5H GIFPE SH LDPE 7977A 010500 #5H GIFPE SH LDPE Put-Up (ft.) 1000 Ship Weight (lbs.) 145 Jacket Color BLACK Notes C 500 73.5 BLACK C C = CRATE REEL PUT-UP. Revision Number: 2 Revision Date: 07-08-2005 Page 3 of 4 7977A Coax - Low Loss 50 Ohm Wireless RF Transmission Cable (c) 2005 Belden Wire & Cable Company All Rights Reserved. Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Page 4 of 4