S-8211C Series
www.ablicinc.com
BATTERY PROTECTION IC
FOR 1-CELL PACK
© ABLIC Inc., 2004-2015 Rev.7.7_03
1
The S-8211C Series is a protection IC for 1-cell lithium-ion / lithium polymer rechargeable battery and includes high-
accuracy voltage detection circuits and delay circuits.
The S-8211C Series is suitable for protecting 1-cell lithium-ion / lithium polymer rechargeable battery packs from
overcharge, overdischarge, and overcurrent.
Features
High-accuracy voltage detection circuit
Overcharge detection voltage 3.9 V to 4.5 V (5 mV step) Accuracy 25 mV (Ta = 25°C)
Accuracy 30 mV (Ta = 5°C to 55°C)
Overcharge release voltage 3.8 V to 4.43 VP
*1
PAccuracy 50 mV
Overdischarge detection voltage 2.0 V to 3.0 V (10 mV step) Accuracy 50 mV
Overdischarge release voltage 2.0 V to 3.4 VP
*2
PAccuracy 100 mV
Discharge overcurrent detection voltage 0.05 V to 0.30 V (10 mV step) Accuracy 15 mV
Load short-circuiting detection voltage 0.5 V (fixed) Accuracy 200 mV
Charge overcurrent detection voltage 0.1 V (fixed) Accuracy 30 mV
Detection delay times are generated only by an internal circuit (external capacitors are unnecessary).
Accuracy 20%
High-withstand voltage (VM pin and CO pin: Absolute maximum rating = 28 V)
0 V battery charge function "available" / "unavailable" is selectable.
Power-down function "available" / "unavailable" is selectable.
Wide operation temperature range Ta = 40°C to 85°C
Low current consumption
During operation 3.0 A typ., 5.5 A max. (Ta = 25°C)
During power-down 0.2 A max. (Ta = 25°C)
Lead-free, Sn 100%, halogen-freeP
*3
*1. Overcharge release voltage = Overcharge detection voltage Overcharge hysteresis voltage
(Overcharge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.4 V in 50 mV step.)
*2. Overdischarge release voltage = Overdischarge detection voltage Overdischarge hysteresis voltage
(Overdischarge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.7 V in 100 mV step.)
*3. Refer to " Product Name Structure" for details.
Applications
Lithium-ion rechargeable battery pack
Lithium polymer rechargeable battery pack
Packages
SOT-23-5
SNT-6A
www.ablic.com
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
2
Block Diagram
+
VM
VSS
VDD
CO
DO
Overcharge
detection
comparator
Discharge overcurrent detection
comparator
+
+
Load short-circuiting detection
com
p
arato
r
Output control circuit
Charge overcurrent detection
comparator
R
VMD
R
VMS
Charger detection circuit
0 V battery charge /
charge inhibition circuit
Oscillator control
circuit
Overdischarge
detection
comparator
Divider control
circuit
Remark All diodes shown in figure are parasitic diodes.
Figure 1
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
3
Product Name Structure
1. Product name
1. 1 SOT-23-5
S-8211C xx - M5T1 x
Serial code*2
Sequentially set from AA to ZZ
Package name (abbreviation) and IC packing specifications*1
M5T1: SOT-23-5, Tape
Environmental code
U: Lead-free (Sn 100%), halogen-free
G: Lead-free (for details, please contact our sales office)
*1. Refer to the tape drawing.
*2. Refer to "3. Product name list".
1. 2 SNT-6A
S-8211C xx - I6T1 U
Serial code
*2
Sequentially set from AA to ZZ
Package name (abbreviation) and IC packing specifications
*1
I6T1: SNT-6A, Tape
Environmental code
U: Lead-free (Sn 100%), halogen-free
*1. Refer to the tape drawing.
*2. Refer to "3. Product name list".
2. Packages
Table 1 Package Drawing Codes
Package Name Dimension Tape Reel Land
SOT-23-5 MP005-A-P-SD MP005-A-C-SD MP005-A-R-SD
SNT-6A PG006-A-P-SD PG006-A-C-SD PG006-A-R-SD PG006-A-L-SD
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
4
3. Product name list
3. 1 SOT-23-5
Table 2
Product Name
Over-
charge
Detection
Voltage
[V
CU
]
Over-
charge
Release
Voltage
[V
CL
]
Over-
discharge
Detection
Voltage
[V
DL
]
Over-
discharge
Release
Voltage
[V
DU
]
Discharge
Overcurrent
Detection
Voltage
[V
DIOV
]
0 V Battery
Charge
Function
Delay Time
Combination
P
*1
Power-down
Function
S-8211CAA-M5T1x 4.275 V 4.175 V 2.30 V 2.40 V 0.10 V Available (1) Available
S-8211CAB-M5T1x 4.325 V 4.075 V 2.50 V 2.90 V 0.15 V Unavailable (2) Available
S-8211CAD-M5T1x 4.350 V 4.150 V 2.30 V 3.00 V 0.20 V Available (3) Available
S-8211CAE-M5T1x 4.280 V 4.180 V 2.30 V 2.30 V 0.12 V Available (4) Available
S-8211CAF-M5T1x 4.275 V 4.275 V 2.30 V 2.30 V 0.10 V Available (5) Available
S-8211CAH-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V 0.08 V Available (1) Available
S-8211CAI-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V 0.10 V Available (1) Available
S-8211CAJ-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V 0.10 V Unavailable (1) Available
S-8211CAK-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V 0.13 V Unavailable (1) Available
S-8211CAL-M5T1x 4.280 V 4.130 V 2.60 V 3.10 V 0.15 V Unavailable (1) Available
S-8211CAM-M5T1x 4.280 V 4.130 V 2.80 V 3.10 V 0.15 V Unavailable (1) Available
S-8211CAN-M5T1x 4.200 V 4.100 V 2.80 V 2.90 V 0.15 V Unavailable (1) Available
S-8211CAO-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V 0.12 V Available (5) Available
S-8211CAP-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V 0.13 V Available (5) Available
S-8211CAQ-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V 0.15 V Available (5) Available
S-8211CAR-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V 0.15 V Available (1) Available
S-8211CAS-M5T1x 4.280 V 4.130 V 2.80 V 3.10 V 0.10 V Unavailable (1) Available
S-8211CAT-M5T1x 4.275 V 4.075 V 2.80 V 3.10 V 0.10 V Available (4) Available
S-8211CAU-M5T1x 4.280 V 4.130 V 2.80 V 3.10 V 0.05 V Unavailable (1) Available
S-8211CAV-M5T1x 4.325 V 4.075 V 2.50 V 2.90 V 0.15 V Available (2) Available
S-8211CAY-M5T1x 4.280 V 4.280 V 2.80 V 2.80 V 0.05 V Available (1)
Available
S-8211CAZ-M5T1x 4.280 V 4.280 V 3.00 V 3.00 V 0.075 V Available (1)
Available
S-8211CBV-M5T1x 4.280 V 4.080 V 2.80 V 2.80 V 0.15 V Available (4)
Available
S-8211CCD-M5T1U 4.280 V 4.130 V 2.70 V 3.10 V 0.20 V Available (1)
Available
S-8211CCJ-M5T1U
*2
4.225 V 4.025 V 2.50 V 2.90 V 0.15 V Available (8)
Unavailable
S-8211CCK-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V 0.30 V Unavailable (1) Available
S-8211CCQ-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V 0.12 V Unavailable (1) Available
S-8211CCR-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V 0.15 V Unavailable (1) Available
S-8211CCT-M5T1U 4.150 V 4.050 V 2.50 V 2.80 V 0.16 V Available (1)
Available
S-8211CCV-M5T1U 4.220 V 4.120 V 2.50 V 2.80 V 0.16 V Available (1)
Unavailable
S-8211CCW-M5T1U 4.280 V 4.130 V 2.30 V 3.00 V 0.20 V Available (3)
Available
S-8211CDB-M5T1U 4.100 V 3.850 V 2.50 V 2.90 V 0.15 V Unavailable (1) Available
S-8211CDD-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V 0.12 V Unavailable (6) Available
S-8211CDG-M5T1U 4.275 V 4.075 V 2.50 V 3.00 V 0.16 V Available (1)
Available
S-8211CDJ-M5T1U 4.150 V 4.050 V 2.90 V 3.00 V 0.15 V Unavailable (1) Available
S-8211CDN-M5T1U 4.350 V 4.150 V 2.80 V 3.10 V 0.05 V Available (1)
Available
*1. Refer to Table 4 about the details of the delay time combinations.
*2. The charge overcurrent detection voltage: 0.15 V 0.03 V (Ta = 25°C)
Remark 1. Please contact our sales office for the products with detection voltage value other than those specified above.
2. x: G or U
3. Please select products of environmental code = U for Sn 100%, halogen-free products.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
5
3. 2 SNT-6A
Table 3 (1 / 2)
Product Name
Over-
charge
Detection
Voltage
[V
CU
]
Over-
charge
Release
Voltage
[V
CL
]
Over-
discharge
Detection
Voltage
[V
DL
]
Over-
discharge
Release
Voltage
[V
DU
]
Discharge
Overcurrent
Detection
Voltage
[V
DIOV
]
0 V Battery
Charge
Function
Delay Time
Combination
P
*1
Power-down
Function
S-8211CAA-I6T1U 4.275 V 4.175 V 2.30 V 2.40 V 0.10 V Available (1)
Available
S-8211CAB-I6T1U 4.325 V 4.075 V 2.50 V 2.90 V 0.15 V Unavailable (2) Available
S-8211CAD-I6T1U 4.350 V 4.150 V 2.30 V 3.00 V 0.20 V Available (3) Available
S-8211CAE-I6T1U 4.280 V 4.180 V 2.30 V 2.30 V 0.12 V Available (4) Available
S-8211CAF-I6T1U 4.275 V 4.275 V 2.30 V 2.30 V 0.10 V Available (5) Available
S-8211CAH-I6T1U 4.280 V 4.080 V 2.30 V 2.30 V 0.08 V Available (1) Available
S-8211CAI-I6T1U 4.280 V 4.080 V 2.30 V 2.30 V 0.10 V Available (1) Available
S-8211CAJ-I6T1U 4.280 V 4.080 V 2.30 V 2.30 V 0.10 V Unavailable (1) Available
S-8211CAK-I6T1U 4.280 V 4.080 V 2.30 V 2.30 V 0.13 V Unavailable (1) Available
S-8211CAL-I6T1U 4.280 V 4.130 V 2.60 V 3.10 V 0.15 V Unavailable (1) Available
S-8211CAM-I6T1U 4.280 V 4.130 V 2.80 V 3.10 V 0.15 V Unavailable (1) Available
S-8211CAN-I6T1U 4.200 V 4.100 V 2.80 V 2.90 V 0.15 V Unavailable (1) Available
S-8211CAO-I6T1U 4.275 V 4.075 V 2.30 V 2.30 V 0.12 V Available (5) Available
S-8211CAP-I6T1U 4.275 V 4.075 V 2.30 V 2.30 V 0.13 V Available (5) Available
S-8211CAQ-I6T1U 4.275 V 4.075 V 2.30 V 2.30 V 0.15 V Available (5) Available
S-8211CAR-I6T1U 4.275 V 4.075 V 2.30 V 2.30 V 0.15 V Available (1) Available
S-8211CAS-I6T1U 4.280 V 4.130 V 2.80 V 3.10 V 0.10 V Unavailable (1) Available
S-8211CAT-I6T1U 4.275 V 4.075 V 2.80 V 3.10 V 0.10 V Available (4) Available
S-8211CAU-I6T1U 4.280 V 4.130 V 2.80 V 3.10 V 0.05 V Unavailable (1) Available
S-8211CAV-I6T1U 4.325 V 4.075 V 2.50 V 2.90 V 0.15 V Available (2) Available
S-8211CAW-I6T1U 4.280 V 4.080 V 2.40 V 2.40 V 0.05 V Unavailable (6) Available
S-8211CAX-I6T1U 4.275 V 4.175 V 2.30 V 2.30 V 0.12 V Available (4)
Available
S-8211CAY-I6T1U 4.280 V 4.280 V 2.80 V 2.80 V 0.05 V Available (1)
Available
S-8211CAZ-I6T1U 4.280 V 4.280 V 3.00 V 3.00 V 0.075 V Available (1)
Available
S-8211CBA-I6T1U 4.275 V 4.175 V 2.30 V 2.40 V 0.05 V Available (1)
Available
S-8211CBB-I6T1U 4.300 V 4.100 V 2.30 V 2.30 V 0.13 V Available (1)
Available
S-8211CBD-I6T1U 4.275 V 4.275 V 2.30 V 2.30 V 0.05 V Available (5)
Available
S-8211CBF-I6T1U 4.300 V 4.100 V 2.10 V 2.10 V 0.13 V Available (1)
Available
S-8211CBH-I6T1U 4.275 V 4.175 V 2.80 V 2.90 V 0.08 V Available
(1) Available
S-8211CBJ-I6T1U 4.275 V 4.075 V 2.80 V 2.90 V 0.10 V Available
(5) Available
S-8211CBN-I6T1U 4.225 V 4.125 V 2.00 V 2.00 V 0.20 V Unavailable (7) Available
S-8211CBO-I6T1U 4.270 V 4.070 V 2.30 V 2.30 V 0.10 V Available (5)
Available
S-8211CBR-I6T1U 4.280 V 4.180 V 2.30 V 2.30 V 0.12 V Unavailable (4) Available
S-8211CBV-I6T1U 4.280 V 4.080 V 2.80 V 2.80 V 0.15 V Available (4)
Available
S-8211CBW-I6T1U 4.280 V 4.180 V 2.50 V 2.70 V 0.19 V Unavailable (1)
Available
S-8211CBZ-I6T1U 4.375 V 4.125 V 2.50 V 2.90 V 0.12 V Unavailable (4) Available
S-8211CCB-I6T1U 4.250 V 4.050 V 3.00 V 3.20 V 0.10 V Available (1)
Available
S-8211CCC-I6T1U 4.270 V 4.070 V 3.00 V 3.00 V 0.10 V Available (5)
Available
S-8211CCD-I6T1U 4.280 V 4.130 V 2.70 V 3.10 V 0.20 V Available (1)
Available
S-8211CCE-I6T1U
*2
4.225 V 4.025 V 2.80 V 2.80 V 0.15 V Available (8)
Unavailable
S-8211CCF-I6T1U 4.350 V 4.050 V 2.30 V 2.30 V 0.13 V Available (5)
Available
S-8211CCG-I6T1U 4.275 V 4.075 V 2.50 V 2.70 V 0.16 V Unavailable (1) Available
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
6
Table 3 (2 / 2)
Product Name
Over-charge
Detection
Voltage
[V
CU
]
Over-
charge
Release
Voltage
[V
CL
]
Over-
discharge
Detection
Voltage
[V
DL
]
Over-
discharge
Release
Voltage
[V
DU
]
Discharge
Overcurrent
Detection
Voltage
[V
DIOV
]
0 V Battery
Charge
Function
Delay Time
Combination
P
*1
Power-down
Function
S-8211CCH-I6T1U
*2
4.275 V 4.075 V 2.80 V 2.80 V 0.15 V Unavailable (8) Available
S-8211CCI-I6T1U 4.275 V 4.075 V 2.60 V 2.60 V 0.15 V Available (5) Available
S-8211CCJ-I6T1U
*2
4.225 V 4.025 V 2.50 V 2.90 V 0.15 V Available (8) Unavailable
S-8211CCM-I6T1U 4.275 V 4.075 V 2.80 V 3.10 V 0.20 V Available (4) Available
S-8211CCN-I6T1U
*2
4.280 V 4.180 V 2.50 V 2.70 V 0.17 V Unavailable (1) Available
S-8211CCS-I6T1U 4.425 V 4.225 V 2.30 V 2.30 V 0.165 V Unavailable (5) Available
S-8211CCU-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V 0.13 V Available (5) Available
S-8211CCW-I6T1U 4.280 V 4.130 V 2.30 V 3.00 V 0.20 V Available (3) Available
S-8211CCX-I6T1U 4.425 V 4.225 V 2.30 V 2.30 V 0.07 V Available (5) Available
S-8211CCY-I6T1U 4.280 V 4.180 V 2.80 V 2.80 V 0.12 V Unavailable (4) Available
S-8211CCZ-I6T1U 4.280 V 4.180 V 2.50 V 2.50 V 0.12 V Unavailable (4) Available
S-8211CDA-I6T1U 4.280 V 4.130 V 2.60 V 3.10 V 0.10 V Unavailable (1) Available
S-8211CDC-I6T1U 4.280 V 4.130 V 3.00 V 3.10 V 0.15 V Unavailable (1) Available
S-8211CDE-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V 0.10 V Available (5) Available
S-8211CDF-I6T1U 4.425 V 4.225 V 2.80 V 2.80 V 0.12 V Available (5) Available
S-8211CDH-I6T1U 4.275 V 4.075 V 2.60 V 2.60 V 0.10 V Available (5) Available
S-8211CDI-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V 0.15 V Available (5) Available
S-8211CDK-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V 0.15 V Unavailable (5) Available
S-8211CDL-I6T1U 4.425 V 4.225 V 2.50 V 2.90 V 0.13 V Available (5) Unavailable
S-8211CDM-I6T1U 4.425 V 4.225 V 2.50 V 3.10 V 0.10 V Unavailable (1) Available
S-8211CDO-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V 0.10 V Unavailable (1) Available
S-8211CDP-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V 0.13 V Available (9) Available
*1. Refer to Table 4 about the details of the delay time combinations.
*2. The charge overcurrent detection voltage: 0.15 V 0.03 V (Ta = 25°C)
Remark Please contact our sales office for the products with detection voltage value other than those specified above.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
7
Table 4
Delay Time
Combination
Overcharge
Detection
Delay Time
[tCU]
Overdischarge
Detection
Delay Time
[tDL]
Discharge Overcurrent
Detection
Delay Time
[tDIOV]
Load Short-circuiting
Detection
Delay Time
[tSHORT]
Charge Overcurrent
Detection
Delay Time
[tCIOV]
(1) 1.2 s 150 ms 9 ms 300 s 9 ms
(2) 1.2 s 150 ms 9 ms 560 s 9 ms
(3) 143 ms 38 ms 18 ms 300 s 9 ms
(4) 1.2 s 150 ms 18 ms 300 s 9 ms
(5) 1.2 s 38 ms 9 ms 300 s 9 ms
(6) 1.2 s 150 ms 4.5 ms 300 s 9 ms
(7) 573 ms 150 ms 4.5 ms 300 s 4.5 ms
(8) 1.2 s 75 ms 9 ms 300 s 9 ms
(9) 1.2 s 300 ms 9 ms 300 s 9 ms
Remark The delay times can be changed within the range listed in Table 5. For details, please contact our sales office.
Table 5
Delay Time
Symbol Selection Range
Remark
Overcharge detection delay time
tCU 143 ms 573 ms 1.2 sP
*1 Select a value from the left.
Overdischarge detection delay time
tDL 38 ms 75 ms 150 msP
*1 300 ms Select a value from the left.
Discharge overcurrent detection delay time
tDIOV 4.5 ms 9 msP
*1 18 ms Select a value from the left.
Load short-circuiting detection delay time tSHORT 300 sP
*1 560 s Select a value from the left.
Charge overcurrent detection delay time
tCIOV 4.5 ms 9 msP
*1 18 ms Select a value from the left.
*1. The value is the delay time of the standard products.
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
8
Pin Configurations
1. SOT-23-5
132
45
Top view
Figure 2
Table 6
Pin No. Symbol Description
1 VM Voltage detection pin between VM pin and VSS pin
(Overcurrent / charger detection pin)
2 VDD Input pin for positive power supply
3 VSS Input pin for negative power supply
4 DO Connection pin of discharge control FET gate
(CMOS output)
5 CO Connection pin of charge control FET gate
(CMOS output)
2. SNT-6A
5
4
6
2
3
1
Top view
Figure 3
Table 7
Pin No. Symbol Description
1
NCP
*1 No connection
2 CO
Connection pin of charge control FET gate
(CMOS output)
3 DO
Connection pin of discharge control FET gate
(CMOS output)
4 VSS Input pin for negative power supply
5 VDD Input pin for positive power supply
6 VM
Voltage detection pin between VM pin and VSS pin
(Overcurrent / charger detection pin)
*1. The NC pin is electrically open.
The NC pin can be connected to VDD pin or VSS pin.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
9
Absolute Maximum Ratings
Table 8
(Ta = 25°C unless otherwise specified)
Item Symbol Applied pin Absolute Maximum Rating Unit
Input voltage between VDD pin and
VSS pin VDS VDD
VSS 0.3 to VSS 12 V
VM pin input voltage VVM VM VDD 28 to VDD 0.3 V
DO pin output voltage VDO DO VSS 0.3 to VDD 0.3 V
CO pin output voltage VCO CO VVM 0.3 to VDD 0.3 V
Power dissipation SOT-23-5 PD
250 (When not mounted on board) mW
600P
*1 mW
SNT-6A 400P
*1 mW
Operation ambient temperature Topr 40 to 85 C
Storage temperature Tstg 55 to 125 C
*1. When mounted on board
[Mounted board]
(1) Board size: 114.3 mm 76.2 mm t1.6 mm
(2) Board name: JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
050 100 150
700
400
0
Power Dissi
p
ation
(
PD
)
[
mW
]
Ambient Tem
p
erature
(
Ta
)
[
C
]
200
600
500
300
100
SNT-6A
SOT-23-5
Figure 4 Power Dissipation of Package (When Mounted on Board)
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
10
Electrical Characteristics
1. Except detection delay time (Ta = 25°C)
Table 9
(Ta = 25°C unless otherwise specified)
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Detection Voltage
Overcharge detection voltage V
CU
3.90 V to 4.50 V, adjustable V
CU
0.025 V
CU
V
CU
0.025 V 1 1
3.90 V to 4.50 V, adjustable,
Ta =
5°C to
55°C
P
*1
V
CU
0.03 V
CU
V
CU
0.03 V 1 1
Overcharge release voltage V
CL
3.80 V to 4.43 V,
adjustable
V
CL
V
CU
V
CL
0.05 V
CL
V
CL
0.05 V 1 1
V
CL
= V
CU
V
CL
0.025 V
CL
V
CL
0.025 V 1 1
Overdischarge detection voltage V
DL
2.00 V to 3.00 V, adjustable V
DL
0.05 V
DL
V
DL
0.05 V 2 2
Overdischarge release voltage V
DU
2.00 V to 3.40 V,
adjustable
V
DU
V
DL
V
DU
0.10 V
DU
V
DU
0.10 V 2 2
V
DU
= V
DL
V
DU
0.05 V
DU
V
DU
0.05 V 2 2
Discharge overcurrent detection voltage V
DIOV
0.05 V to 0.30 V, adjustable V
DIOV
0.015 V
DIOV
V
DIOV
0.015 V 3 2
Load short-circuiting detection voltage
P
*2
V
SHORT
0.30 0.50 0.70 V 3 2
Charge overcurrent detection voltage V
CIOV
0.13
0.1
0.07 V 4 2
0 V Battery Charge Function
0 V battery charge starting charger voltage V
0CHA
0 V battery charge function
"available" 1.2
V 11 2
0 V battery charge inhibition battery voltage V
0INH
0 V battery charge function
"unavailable"
0.5 V 12 2
Internal Resistance
Resistance between VM pin and VDD pin R
VMD
V
DD
= 1.8 V, V
VM
= 0 V 100 300 900
k
6 3
Resistance between VM pin and VSS pin R
VMS
V
DD
= 3.5 V, V
VM
= 1.0 V 10 20 40 k
6 3
Input Voltage
Operation voltage between VDD pin
and VSS pin V
DSOP1
1.5
8 V
Operation voltage between VDD pin
and VM pin V
DSOP2
1.5
28 V
Input Current (With Power-down Function)
Current consumption during operation I
OPE
V
DD
= 3.5 V, V
VM
= 0 V 1.0 3.0 5.5
A 5 2
Current consumption during power-down I
PDN
V
DD
= V
VM
= 1.5 V
0.2
A 5 2
Input Current (Without Power-down Function)
Current consumption during operation I
OPE
V
DD
= 3.5 V, V
VM
= 0 V
1.0 3.0 5.5
A 5 2
Current consumption during overdischarge I
OPED
V
DD
= V
VM
= 1.5 V
0.3 2.0 3.5
A 5 2
Output Resistance
CO pin resistance "H" R
COH
V
CO
= 3.0 V, V
DD
= 3.5 V, V
VM
= 0 V 2.5 5 10 k
7 4
CO pin resistance "L" R
COL
V
CO
= 0.5 V, V
DD
= 4.5 V, V
VM
= 0 V 2.5 5 10 k
7 4
DO pin resistance "H" R
DOH
V
DO
= 3.0 V, V
DD
= 3.5 V, V
VM
= 0 V 2.5 5 10 k
8 4
DO pin resistance "L" R
DOL
V
DO
= 0.5 V, V
DD
= V
VM
= 1.8 V 2.5 5 10 k
8 4
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
*2. In any conditions, load short-circuiting detection voltage (VSHORT) is higher than discharge overcurrent detection voltage
(VDIOV).
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
11
2. Except detection delay time (Ta = 40°C to 85°CP
*1
P)
Table 10
(Ta = 40°C to 85°CP
*1
P unless otherwise specified)
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Detection Voltage
Overcharge detection voltage V
CU
3.90 V to 4.50 V, adjustable V
CU
0.060 V
CU
V
CU
0.040 V 1 1
Overcharge release voltage V
CL
3.80 V to 4.43 V,
adjustable
V
CL
V
CU
V
CL
0.08 V
CL
V
CL
0.065 V 1 1
V
CL
= V
CU
V
CL
0.06 V
CL
V
CL
0.04 V 1 1
Overdischarge detection voltage V
DL
2.00 V to 3.00 V, adjustable V
DL
0.11 V
DL
V
DL
0.13 V 2 2
Overdischarge release voltage V
DU
2.00 V to 3.40 V,
adjustable
V
DU
V
DL
V
DU
0.15 V
DU
V
DU
0.19 V 2 2
V
DU
= V
DL
V
DU
0.11 V
DU
V
DU
0.13 V 2 2
Discharge overcurrent detection voltage V
DIOV
0.05 V to 0.30 V, adjustable V
DIOV
0.021 V
DIOV
V
DIOV
0.024 V 3 2
Load short-circuiting detection voltage
P
*2
V
SHORT
0.16 0.50 0.84
V 3 2
Charge overcurrent detection voltage V
CIOV
0.14
0.1
0.06 V 4 2
0 V Battery Charge Function
0 V battery charge starting charger voltage V
0CHA
0 V battery charge function
"available" 1.7
V 11 2
0 V battery charge inhibition battery voltage V
0INH
0 V battery charge function
"unavailable"
0.3
V 12 2
Internal Resistance
Resistance between VM pin and VDD pin R
VMD
V
DD
= 1.8 V, V
VM
= 0 V 78 300 1310
k
6 3
Resistance between VM pin and VSS pin R
VMS
V
DD
= 3.5 V, V
VM
= 1.0 V 7.2 20 44
k
6 3
Input Voltage
Operation voltage between VDD pin
and VSS pin V
DSOP1
1.5
8
V
Operation voltage between VDD pin
and VM pin V
DSOP2
1.5
28
V
Input Current (With Power-down Function)
Current consumption during operation I
OPE
V
DD
= 3.5 V, V
VM
= 0 V 0.7 3.0 6.0
A 5 2
Current consumption during power-down I
PDN
V
DD
= V
VM
= 1.5 V
0.3
A 5 2
Input Current (Without Power-down Function)
Current consumption during operation I
OPE
V
DD
= 3.5 V, V
VM
= 0 V 0.7 3.0 6.0
A 5 2
Current consumption during overdischarge I
OPED
V
DD
= V
VM
= 1.5 V 0.2 2.0 3.8
A 5 2
Output Resistance
CO pin resistance "H" R
COH
V
CO
= 3.0 V, V
DD
= 3.5 V, V
VM
= 0 V 1.2 5 15
k
7 4
CO pin resistance "L" R
COL
V
CO
= 0.5 V, V
DD
= 4.5 V, V
VM
= 0 V 1.2 5 15
k
7 4
DO pin resistance "H" R
DOH
V
DO
= 3.0 V, V
DD
= 3.5 V, V
VM
= 0 V 1.2 5 15
k
8 4
DO pin resistance "L" R
DOL
V
DO
= 0.5 V, V
DD
= V
VM
= 1.8 V 1.2 5 15
k
8 4
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
*2. In any conditions, load short-circuiting detection voltage (VSHORT) is higher than discharge overcurrent detection voltage
(VDIOV).
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
12
3. Detection delay time
3. 1 S-8211CAA, S-8211CAH, S-8211CAI, S-8211CAJ, S-8211CAK, S-8211CAL, S-8211CAM, S-8211CAN,
S-8211CAR, S-8211CAS, S-8211CAU, S-8211CAY, S-8211CAZ, S-8211CBA, S-8211CBB, S-8211CBF,
S-8211CBH, S-8211CBW, S-8211CCB, S-8211CCD, S-8211CCG, S-8211CCK, S-8211CCN, S-8211CCQ,
S-8211CCR, S-8211CCT, S-8211CCV, S-8211CDA, S-8211CDB, S-8211CDC, S-8211CDG, S-8211CDJ,
S-8211CDM, S-8211CDN, S-8211CDO
Table 11
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
0.96 1.2 1.4 s 9 5
Overdischarge detection delay time t
DL
120 150 180 ms 9 5
Discharge overcurrent detection delay time t
DIOV
7.2 9 11 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
0.7 1.2 2.0 s 9 5
Overdischarge detection delay time t
DL
83 150 255 ms 9 5
Discharge overcurrent detection delay time t
DIOV
5 9 15
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
3. 2 S-8211CAB, S-8211CAV
Table 12
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
0.96 1.2 1.4 s 9 5
Overdischarge detection delay time t
DL
120 150 180 ms 9 5
Discharge overcurrent detection delay time t
DIOV
7.2 9 11 ms 10 5
Load short-circuiting detection delay time t
SHORT
450 560 670
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
0.7 1.2 2.0 s 9 5
Overdischarge detection delay time t
DL
83 150 255 ms 9 5
Discharge overcurrent detection delay time t
DIOV
5 9 15 ms 10 5
Load short-circuiting detection delay time t
SHORT
260 560 940
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
13
3. 3 S-8211CAD, S-8211CCW
Table 13
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
115 143 172 ms 9 5
Overdischarge detection delay time t
DL
30 38 46 ms 9 5
Discharge overcurrent detection delay time t
DIOV
14.5 18 22 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*
1
Overcharge detection delay time t
CU
82 143 240 ms 9 5
Overdischarge detection delay time t
DL
20 38 65 ms 9 5
Discharge overcurrent detection delay time t
DIOV
10 18 30
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
3. 4 S-8211CAE, S-8211CAT, S-8211CAX, S-8211CBR, S-8211CBV, S-8211CBZ, S-8211CCM, S-8211CCY,
S-8211CCZ
Table 14
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
0.96 1.2 1.4 s 9 5
Overdischarge detection delay time t
DL
120 150 180 ms 9 5
Discharge overcurrent detection delay time t
DIOV
14.5 18 22 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
0.7 1.2 2.0 s 9 5
Overdischarge detection delay time t
DL
83 150 255 ms 9 5
Discharge overcurrent detection delay time t
DIOV
10 18 30
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
14
3. 5 S-8211CAF, S-8211CAO, S-8211CAP, S-8211CAQ, S-8211CBD, S-8211CBJ, S-8211CBO, S-8211CCC,
S-8211CCF, S-8211CCI, S-8211CCS, S-8211CCU, S-8211CCX, S-8211CDE, S-8211CDF, S-8211CDH,
S-8211CDI, S-8211CDK, S-8211CDL
Table 15
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
0.96 1.2 1.4 s 9 5
Overdischarge detection delay time t
DL
30 38 46 ms 9 5
Discharge overcurrent detection delay time t
DIOV
7.2 9 11 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
0.7 1.2 2.0 s 9 5
Overdischarge detection delay time t
DL
20 38 65 ms 9 5
Discharge overcurrent detection delay time t
DIOV
5 9 15
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
3. 6 S-8211CAW, S-8211CDD
Table 16
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
0.96 1.2 1.4 s 9 5
Overdischarge detection delay time t
DL
120 150 180 ms 9 5
Discharge overcurrent detection delay time t
DIOV
3.6 4.5 5.4 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
0.7 1.2 2.0 s 9 5
Overdischarge detection delay time t
DL
83 150 255 ms 9 5
Discharge overcurrent detection delay time t
DIOV
2.5 4.5 7.7
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
15
3. 7 S-8211CBN
Table 17
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
458 573 687 ms 9 5
Overdischarge detection delay time t
DL
120 150 180 ms 9 5
Discharge overcurrent detection delay time t
DIOV
3.6 4.5 5.4 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
3.6 4.5 5.4 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
334 573 955 ms 9 5
Overdischarge detection delay time t
DL
83 150 255 ms 9 5
Discharge overcurrent detection delay time t
DIOV
2.5 4.5 7.7
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
2.5 4.5 7.7 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
3. 8 S-8211CCE, S-8211CCH, S-8211CCJ
Table 18
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
0.96 1.2 1.4 s 9 5
Overdischarge detection delay time t
DL
61 75 90 ms 9 5
Discharge overcurrent detection delay time t
DIOV
7.2 9 11 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
0.7 1.2 2.0 s 9 5
Overdischarge detection delay time t
DL
41 75 128 ms 9 5
Discharge overcurrent detection delay time t
DIOV
5 9 15
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
16
3. 9 S-8211CDP
Table 19
Item Symbol Condition Min. Typ. Max. Unit
Test
Condition
Test
Circuit
Delay Time (Ta =
25°C)
Overcharge detection delay time t
CU
0.96 1.2 1.4 s 9 5
Overdischarge detection delay time t
DL
240 300 360 ms 9 5
Discharge overcurrent detection delay time t
DIOV
7.2 9 11 ms 10 5
Load short-circuiting detection delay time t
SHORT
240 300 360
s 10 5
Charge overcurrent detection delay time t
CIOV
7.2 9 11 ms 10 5
Delay Time (Ta =
40°C to
85°C)
P
*1
Overcharge detection delay time t
CU
0.7 1.2 2.0 s 9 5
Overdischarge detection delay time t
DL
166 300 510 ms 9 5
Discharge overcurrent detection delay time t
DIOV
5 9 15
ms 10 5
Load short-circuiting detection delay time t
SHORT
150 300 540
s 10 5
Charge overcurrent detection delay time t
CIOV
5 9 15 ms 10 5
*1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed
by design, not tested in production.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
17
Test Circuits
Caution Unless otherwise specified, the output voltage levels "H" and "L" at CO pin (VCO) and DO pin (VDO) are
judged by the threshold voltage (1.0 V) of the N-channel FET. Judge the CO pin level with respect to
VVM and the DO pin level with respect to VSS.
1. Overcharge detection voltage, overcharge release voltage
(Test condition 1, test circuit 1)
Overcharge detection voltage (VCU) is defined as the voltage between the VDD pin and VSS pin at which VCO goes
from "H" to "L" when the voltage V1 is gradually increased from the starting condition of V1 = 3.5 V. Overcharge
release voltage (VCL) is defined as the voltage between the VDD pin and VSS pin at which VCO goes from "L" to "H"
when the voltage V1 is then gradually decreased. Overcharge hysteresis voltage (VHC) is defined as the difference
between overcharge detection voltage (VCU) and overcharge release voltage (VCL).
2. Overdischarge detection voltage, overdischarge release voltage
(Test condition 2, test circuit 2)
Overdischarge detection voltage (VDL) is defined as the voltage between the VDD pin and VSS pin at which VDO goes
from "H" to "L" when the voltage V1 is gradually decreased from the starting condition of V1 = 3.5 V, V2 = 0 V.
Overdischarge release voltage (VDU) is defined as the voltage between the VDD pin and VSS pin at which VDO goes
from "L" to "H" when the voltage V1 is then gradually increased. Overdischarge hysteresis voltage (VHD) is defined as
the difference between overdischarge release voltage (VDU) and overdischarge detection voltage (VDL).
3. Discharge overcurrent detection voltage
(Test condition 3, test circuit 2)
Discharge overcurrent detection voltage (VDIOV) is defined as the voltage between the VM pin and VSS pin whose
delay time for changing VDO from "H" to "L" lies between the minimum and the maximum value of discharge
overcurrent delay time when the voltage V2 is increased rapidly (within 10 s) from the starting condition of
V1 = 3.5 V, V2 = 0 V.
4. Load short-circuiting detection voltage
(Test condition 3, test circuit 2)
Load short-circuiting detection voltage (VSHORT) is defined as the voltage between the VM pin and VSS pin whose
delay time for changing VDO from "H" to "L" lies between the minimum and the maximum value of load short-circuiting
delay time when the voltage V2 is increased rapidly (within 10 s) from the starting condition of V1 = 3.5 V, V2 = 0 V.
5. Charge overcurrent detection voltage
(Test condition 4, test circuit 2)
Charge overcurrent detection voltage (VCIOV) is defined as the voltage between the VM pin and VSS pin whose delay
time for changing VCO from "H" to "L" lies between the minimum and the maximum value of charge overcurrent delay
time when the voltage V2 is decreased rapidly (within 10 s) from the starting condition of V1 = 3.5 V, V2 = 0 V.
6. Current consumption during operation
(Test condition 5, test circuit 2)
The current consumption during operation (IOPE) is the current that flows through the VDD pin (IDD) under the set
conditions of V1 = 3.5 V and V2 = 0 V (normal status).
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
18
7. Current consumption during power-down, current consumption during overdischarge
(Test condition 5, test circuit 2)
7. 1 With power-down function
The current consumption during power-down (IPDN) is the current that flows through the VDD pin (IDD) under the set
condition of V1 = V2 = 1.5 V (overdischarge status).
7. 2 Without power-down function
The current consumption during overdischarge (IOPED) is the current that flows through the VDD pin (IDD) under the
set condition of V1 = V2 = 1.5 V (overdischarge status).
8. Resistance between VM pin and VDD pin
(Test condition 6, test circuit 3)
The resistance between VM pin and VDD pin (RVMD) is the resistance between VM pin and VDD pin under the set
conditions of V1 = 1.8 V, V2 = 0 V.
9. Resistance between VM pin and VSS pin
(Test condition 6, test circuit 3)
The resistance between VM pin and VSS pin (RVMS) is the resistance between VM pin and VSS pin under the set
conditions of V1 = 3.5 V, V2 = 1.0 V.
10. CO pin resistance "H"
(Test condition 7, test circuit 4)
The CO pin resistance "H" (RCOH) is the resistance at the CO pin under the set conditions of V1 = 3.5 V, V2 = 0 V,
V3 = 3.0 V.
11. CO pin resistance "L"
(Test condition 7, test circuit 4)
The CO pin resistance "L" (RCOL) is the resistance at the CO pin under the set conditions of V1 = 4.5 V, V2 = 0 V,
V3 = 0.5 V.
12. DO pin resistance "H"
(Test condition 8, test circuit 4)
The DO pin resistance "H" (RDOH) is the resistance at the DO pin under the set conditions of V1 = 3.5 V, V2 = 0 V,
V4 = 3.0 V.
13. DO pin resistance "L"
(Test condition 8, test circuit 4)
The DO pin resistance "L" (RDOL) is the resistance at the DO pin under the set conditions of V1 = 1.8 V, V2 = 0 V, V4 =
0.5 V.
14. Overcharge detection delay time
(Test condition 9, test circuit 5)
The overcharge detection delay time (tCU) is the time needed for VCO to change from "H" to "L" just after the voltage
V1 momentarily increases (within 10 s) from overcharge detection voltage (VCU) 0.2 V to overcharge detection
voltage (VCU) 0.2 V under the set condition of V2 = 0 V.
15. Overdischarge detection delay time
(Test condition 9, test circuit 5)
The overdischarge detection delay time (tDL) is the time needed for VDO to change from "H" to "L" just after the voltage
V1 momentarily decreases (within 10 s) from overdischarge detection voltage (VDL) 0.2 V to overdischarge
detection voltage (VDL) 0.2 V under the set condition of V2 = 0 V.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
19
16. Discharge overcurrent detection delay time
(Test condition 10, test circuit 5)
Discharge overcurrent detection delay time (tDIOV) is the time needed for VDO to go to "L" after the voltage V2
momentarily increases (within 10 s) from 0 V to 0.35 V under the set conditions of V1 = 3.5 V, V2 = 0 V.
17. Load short-circuiting detection delay time
(Test condition 10, test circuit 5)
Load short-circuiting detection delay time (tSHORT) is the time needed for VDO to go to "L" after the voltage V2
momentarily increases (within 10 s) from 0 V to 1.6 V under the set conditions of V1 = 3.5 V, V2 = 0 V.
18. Charge overcurrent detection delay time
(Test condition 10, test circuit 5)
Charge overcurrent detection delay time (tCIOV) is the time needed for VCO to go to "L" after the voltage V2
momentarily decreases (within 10 s) from 0 V to 0.3 V under the set conditions of V1 = 3.5 V, V2 = 0 V.
19. 0 V battery charge starting charger voltage (0 V battery charge function "available")
(Test condition 11, test circuit 2)
The 0 V battery charge starting charger voltage (V0CHA) is defined as the voltage between the VDD pin and VM pin at
which VCO goes to "H" (VVM 0.1 V or higher) when the voltage V2 is gradually decreased from the starting condition
of V1 = V2 = 0 V.
20. 0 V battery charge inhibition battery voltage (0 V battery charge function "unavailable")
(Test condition 12, test circuit 2)
The 0 V battery charge inhibition battery voltage (V0INH) is defined as the voltage between the VDD pin and VSS pin
at which V CO goes to "H" (VVM 0.1 V or higher) when the voltage V1 is gradually increased from the starting
conditions of V1 = 0 V, V2 = 4 V.
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
20
V V
DO
V V
CO
CO
DO
VSS
VDD
VM
S-8211C Series
R1 =
220
V1
COM
VV
DO
V V
CO
CO
DO
VSS
VDD
VM
S-8211C Series
V1
V2
COM
A
I
DD
Figure 5 Test Circuit 1 Figure 6 Test Circuit 2
CO DO
VSS
VDD
VM
S-8211C Series
V1
V2
COM
A
I
DD
AI
VM
AI
DO
A I
CO
CO
DO
VSS
VDD
VM
S-8211C Series
V1
V2
COM
V4 V3
Figure 7 Test Circuit 3 Figure 8 Test Circuit 4
CO DO
VSS
VDD
VM
S-8211C Series
V1
V2
COM
Oscilloscope Oscilloscope
Figure 9 Test Circuit 5
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
21
Operation
Remark Refer to " Battery Protection IC Connection Example".
1. Normal status
The S-8211C Series monitors the voltage of the battery connected between the VDD pin and VSS pin and the
voltage difference between the VM pin and VSS pin to control charging and discharging. When the battery voltage is
in the range from overdischarge detection voltage (VDL) to overcharge detection voltage (VCU), and the VM pin
voltage is in the range from the charge overcurrent detection voltage (VCIOV) to discharge overcurrent detection
voltage (VDIOV), the S-8211C Series turns both the charging and discharging control FETs on. This condition is called
the normal status, and in this condition charging and discharging can be carried out freely.
The resistance (RVMD) between the VM pin and VDD pin, and the resistance (RVMS) between the VM pin and VSS pin
are not connected in the normal status.
Caution When the battery is connected for the first time, discharging may not be enabled. In this case, short
the VM pin and VSS pin, or set the VM pin’s voltage at the level of the charge overcurrent detection
voltage (VCIOV) or more and the discharge overcurrent detection voltage (VDIOV) or less by
connecting the charger. The S-8211C Series then returns to the normal status.
2. Overcharge status
When the battery voltage becomes higher than overcharge detection voltage (VCU) during charging in the normal
status and detection continues for the overcharge detection delay time (tCU) or longer, the S-8211C Series turns the
charging control FET off to stop charging. This condition is called the overcharge status.
The resistance (RVMD) between the VM pin and VDD pin, and the resistance (RVMS) between the VM pin and VSS pin
are not connected in the overcharge status.
The overcharge status is released in the following two cases ( (1) and (2) ).
(1) In the case that the VM pin voltage is higher than or equal to the charge overcurrent detection voltage (VCIOV),
and is lower than the discharge overcurrent detection voltage (VDIOV), the S-8211C Series releases the
overcharge status when the battery voltage falls below the overcharge release voltage (VCL).
(2) In the case that the VM pin voltage is higher than or equal to the discharge overcurrent detection voltage (VDIOV),
the S-8211C Series releases the overcharge status when the battery voltage falls below the overcharge
detection voltage (VCU).
The discharge is started by connecting a load after the overcharge detection, the VM pin voltage rises more than
the VSS pin voltage due to the Vf voltage of the parasitic diode, because the discharge current flows through the
parasitic diode in the charging control FET. If this VM pin voltage is higher than or equal to the discharge
overcurrent detection voltage (VDIOV), the S-8211C Series releases the overcharge status when the battery voltage
is lower than or equal to the overcharge detection voltage (VCU).
For the actual application boards, changing the battery voltage and the charger voltage simultaneously enables to
measure the overcharge release voltage (VCL). In this case, the charger is always necessary to have the
equivalent voltage level to the battery voltage. The charger keeps VM pin voltage higher than or equal to the
charge overcurrent detection voltage (VCIOV) and lower than or equal to the discharge overcurrent detection
voltage (VDIOV). The S-8211C Series releases the overcharge status when the battery voltage falls below the
overcharge release voltage (VCL).
Caution 1. If the battery is charged to a voltage higher than overcharge detection voltage (VCU) and the
battery voltage does not fall below overcharge detection voltage (VCU) even when a heavy load is
connected, discharge overcurrent detection and load short-circuiting detection do not function
until the battery voltage falls below overcharge detection voltage (VCU). Since an actual battery
has an internal impedance of tens of m, the battery voltage drops immediately after a heavy
load that causes overcurrent is connected, and discharge overcurrent detection and load short-
circuiting detection function.
2. When a charger is connected after overcharge detection, the overcharge status is not released
even if the battery voltage is below overcharge release voltage (VCL). The overcharge status is
released when the VM pin voltage goes over the charge overcurrent detection voltage (VCIOV) by
removing the charger.
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
22
3. Overdischarge status
3. 1 With power-down function
When the battery voltage falls below overdischarge detection voltage (VDL) during discharging in the normal status
and the detection continues for the overdischarge detection delay time (tDL) or longer, the S-8211C Series turns the
discharging control FET off to stop discharging. This condition is called the overdischarge status. Under the
overdischarge status, the VM pin voltage is pulled up by the resistor between the VM pin and VDD pin in the S-8211C
Series (RVMD). When voltage difference between the VM pin and VDD pin then is 1.3 V typ. or lower, the current
consumption is reduced to the power-down current consumption (IPDN). This condition is called the power-down
status.
The resistance (RVMS) between the VM pin and VSS pin is not connected in the power-down status and the
overdischarge status.
The power-down status is released when a charger is connected and the voltage difference between the VM pin and
VDD pin becomes 1.3 V typ. or higher.
When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is lower
than 0.7 V typ., the S-8211C Series releases the overdischarge status and turns the discharging FET on when the
battery voltage reaches overdischarge detection voltage (VDL) or higher.
When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is not
lower than 0.7 V typ., the S-8211C Series releases the overdischarge status when the battery voltage reaches
overdischarge release voltage (VDU) or higher.
3. 2 Without power-down function
When the battery voltage falls below overdischarge detection voltage (VDL) during discharging in the normal status
and the detection continues for the overdischarge detection delay time (tDL) or longer, the S-8211C Series turns the
discharging control FET off to stop discharging. This condition is called the overdischarge status. Under the
overdischarge status, the VM pin voltage is pulled up by the resistor between the VM pin and VDD pin in the S-8211C
Series (RVMD).
The resistance (RVMS) between the VM pin and VSS pin is not connected in the overdischarge status.
When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is lower
than 0.7 V typ., the S-8211C Series releases the overdischarge status and turns the discharging FET on when the
battery voltage reaches overdischarge detection voltage (VDL) or higher.
When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is not
lower than 0.7 V typ., the S-8211C Series releases the overdischarge status when the battery voltage reaches
overdischarge release voltage (VDU) or higher.
4. Discharge overcurrent status (discharge overcurrent, load short-circuiting)
When a battery in the normal status is in the status where the VM pin voltage is equal to or higher than the discharge
overcurrent detection voltage (VDIOV) because the discharge current is higher than the specified value and the status
lasts for the discharge overcurrent detection delay time (tDIOV), the discharge control FET is turned off and
discharging is stopped. This status is called the discharge overcurrent status.
In the discharge overcurrent status, the VM pin and VSS pin are shorted by the resistor between VM pin and VSS pin
(RVMS) in the S-8211C Series. However, the VM pin voltage is at the VDD potential due to the load as long as the load
is connected. When the load is disconnected completely, the VM pin returns to the VSS potential.
If the S-8211C Series detects that the VM pin voltage returns to discharge overcurrent detection voltage (VDIOV) or
lower, the discharge overcurrent status is restored to the normal status.
The S-8211C Series will be restored to the normal status from discharge overcurrent detection status even when the
VM pin voltage becomes the discharge overcurrent detection voltage (VDIOV) or lower by connecting the charger.
The resistance (RVMD) between the VM pin and VDD pin is not connected in the discharge overcurrent status.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
23
5. Charge overcurrent status
When a battery in the normal status is in the status where the VM pin voltage is lower than the charge overcurrent
detection voltage (VCIOV) because the charge current is higher than the specified value and the status lasts for the
charge overcurrent detection delay time (tCIOV), the charge control FET is turned off and charging is stopped. This
status is called the charge overcurrent status.
The S-8211C Series will be restored to the normal status from the charge overcurrent status when the VM pin voltage
returns to charge overcurrent detection voltage (VCIOV) or higher by removing the charger.
The charge overcurrent detection function does not work in the overdischarge status.
The resistance (RVMD) between the VM pin and VDD pin, and the resistance (RVMS) between the VM pin and VSS pin
are not connected in the charge overcurrent status.
6. 0 V Battery charge function "available"
This function is used to recharge a connected battery whose voltage is 0 V due to self-discharge. When the 0 V
battery charge starting charger voltage (V0CHA) or a higher voltage is applied between the EB and EB pins by
connecting a charger, the charging control FET gate is fixed to the VDD pin voltage.
When the voltage between the gate and source of the charging control FET becomes equal to or higher than the turn-
on voltage due to the charger voltage, the charging control FET is turned on to start charging. At this time, the
discharging control FET is off and the charging current flows through the internal parasitic diode in the discharging
control FET. When the battery voltage becomes equal to or higher than overdischarge release voltage (VDU), the
S-8211C Series enters the normal status.
Caution 1. Some battery providers do not recommend charging for a completely self-discharged battery.
Please ask the battery provider to determine whether to enable or inhibit the 0 V battery charge
function.
2. The 0 V battery charge function has higher priority than the charge overcurrent detection
function. Consequently, a product in which use of the 0 V battery charge function is enabled
charges a battery forcibly and the charge overcurrent cannot be detected when the battery
voltage is lower than overdischarge detection voltage (VDL).
7. 0 V Battery charge function "unavailable"
This function inhibits recharging when a battery that is internally short-circuited (0 V battery) is connected. When the
battery voltage is the 0 V battery charge inhibition battery voltage (V0INH) or lower, the charging control FET gate is
fixed to the EB pin voltage to inhibit charging. When the battery voltage is the 0 V battery charge inhibition battery
voltage (V0INH) or higher, charging can be performed.
Caution Some battery providers do not recommend charging for a completely self-discharged battery.
Please ask the battery provider to determine whether to enable or inhibit the 0 V battery charge
function.
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
24
8. Delay circuit
The detection delay times are determined by dividing a clock of approximately 3.5 kHz by the counter.
Remark 1. The discharge overcurrent detection delay time (tDIOV) and the load short-circuiting detection delay time
(tSHORT) start when the discharge overcurrent detection voltage (VDIOV) is detected. When the load short-
circuiting detection voltage (VSHORT) is detected over the load short-circuiting detection delay time (tSHORT)
after the detection of discharge overcurrent detection voltage (VDIOV), the S-8211C Series turns the
discharging control FET off within the load short-circuiting detection delay time (tSHORT) from the time of
detecting VSHORT.
DO Pin
VM Pin
V
DD
V
DD
Time
V
DIOV
V
SS
V
SS
V
SHORT
Load short-circuiting detection delay time (t
SHORT
)
Time
t
D
0
t
D
t
SHORT
Figure 10
2. With power-down function
When any overcurrent is detected and the overcurrent continues for longer than the overdischarge
detection delay time (tDL) without the load being released, the status changes to the power-down status at
the point where the battery voltage falls below overdischarge detection voltage (VDL).
When the battery voltage falls below overdischarge detection voltage (VDL) due to overcurrent, the
S-8211C Series turns the discharging control FET off via overcurrent detection. In this case, if the
recovery of the battery voltage is so slow that the battery voltage after the overdischarge detection delay
time (tDL) is still lower than the overdischarge detection voltage (VDL), the S-8211C Series shifts to the
power-down status.
Without power-down function
When any overcurrent is detected and the overcurrent continues for longer than the overdischarge
detection delay time (tDL) without the load being released, the status changes to the overdischarge status
at the point where the battery voltage falls below overdischarge detection voltage (VDL).
When the battery voltage falls below overdischarge detection voltage (VDL) due to overcurrent, the
S-8211C Series turns the discharging control FET off via overcurrent detection. In this case, if the
recovery of the battery voltage is so slow that the battery voltage after the overdischarge detection delay
time (tDL) is still lower than the overdischarge detection voltage (VDL), the S-8211C Series shifts to the
overdischarge status.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
25
Timing Charts
1. Overcharge detection, overdischarge detection
VCU
VDU (VDL VHD)
VDL
VCL (VCU VHC)
Battery voltage
VSS
CO pin voltage
VDD
DO pin voltage
VSS
Charger connection
Load connection
Status*1
Overcharge detection delay time (tCU)Overdischarge detection delay time (
t
DL)
(1) (2) (1) (3) (1)
VDIOV
VSS
V
M pin voltage
VDD
VEB
VDD
VCIOV
VEB
*1. (1): Normal status
(2): Overcharge status
(3): Overdischarge status
Remark The charger is assumed to charge with a constant current.
Figure 11
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
26
2. Discharge overcurrent detection
V
DD
VSS
VSHORT
(1) (2) (1) (1)
Load short-circuiting
detection dela
y
time
(
tSHORT
)
(2)
VDIOV
Discharge overcurrent
detection dela
y
time
(
tDIOV
)
VCU
VDU (VDL VHD)
VDL
VCL (VCU VHC)
Battery voltage
VSS
CO pin voltage
VDD
DO pin voltage
VSS
Load connection
Status*1
VM pin voltage
VDD
*1. (1): Normal status
(2): Discharge overcurrent status
Remark The charger is assumed to charge with a constant current.
Figure 12
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
27
3. Charge overcurrent detection
V
DD
DO pin voltage
V
SS
V
DD
V
SS
CO pin voltage
V
DD
V
SS
VM pin voltage
V
CIOV
Status
*1
(
3
)
(
1
)
Charger connection
V
EB
V
EB
Charge overcurrent detection
delay time (t
CIOV
)
V
CU
V
DU
(V
DL
V
HD
)
V
DL
V
CL
(V
CU
V
HC
)
Battery voltage
(
2
)
Load connection
(
1
) (
1
)
(
2
)
Overdischarge detection
dela
y
time
(
t
DL
)
Charge overcurrent detection
delay time (t
CIOV
)
*1. (1): Normal status
(2): Charge overcurrent status
(3): Overdischarge status
Remark The charger is assumed to charge with a constant current.
Figure 13
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
28
Battery Protection IC Connection Example
R1
Battery C1
VSS
DO
VDD
CO VM
S-8211C Series
FET1 FET2
EB
EB
R2
Figure 14
Table 20 Constants for External Components
Symbol Part Purpose Min. Typ. Max. Remark
FET1 N-channel
MOS FET Discharge control
Threshold voltage Overdischarge
detection voltage*1
P
Gate to source withstand voltage
Charger voltageP
*2
FET2 N-channel
MOS FET Charge control
Threshold voltage Overdischarge
detection voltage*1
Gate to source withstand voltage
Charger voltage*2
R1 Resistor
ESD protection,
For power fluctuation 100 220 330
Resistance should be as small as
possible to avoid lowering the
overcharge detection accuracy due to
current consumption.*3
C1 Capacitor For power fluctuation 0.022 F 0.1 F 1.0 F Connect a capacitor of 0.022 F or
higher between VDD pin and VSS pin.*4
R2 Resistor
Protection for reverse
connection of a
charger
300 2 k 2 k
Select as large a resistance as possible
to prevent current when a charger is
connected in reverse.*5
*1. If the threshold voltage of a FET is low, the FET may not cut the charge current. If a FET with a threshold voltage equal
to or higher than the overdischarge detection voltage is used, discharging may be stopped before overdischarge is
detected.
*2. If the withstand voltage between the gate and source is lower than the charger voltage, the FET may be destroyed.
*3. If a high resistor is connected to R1, the voltage between VDD pin and VSS pin may exceed the absolute maximum
rating when a charger is connected in reverse since the current flows from the charger to the IC. Insert a resistor of 100
or higher as R1 for ESD protection.
*4. If a capacitor of less than 0.022 F is connected to C1, DO pin may oscillate when load short-circuiting is detected. Be
sure to connect a capacitor of 0.022 F or higher to C1.
*5. If a resistor of 2 k or higher is connected to R2, the charge current may not be cut when a high-voltage charger is
connected.
Caution 1. The above constants may be changed without notice.
2. It has not been confirmed whether the operation is normal or not in circuits other than the above
example of connection. In addition, the example of connection shown above and the constant do not
guarantee proper operation. Perform thorough evaluation using the actual application to set the
constant.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
29
Precautions
The application conditions for the input voltage, output voltage, and load current should not exceed the package
power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
ABLIC Inc. claims no responsibility for any and all disputes arising out of or in connection with any infringement by
products including this IC of patents owned by a third party.
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
30
Characteristics (Typical Data)
1. Current consumption
1. 1 IOPE vs. Ta 1. 2 IPDN vs. Ta
40 25 0 25 50 75 85
6
5
4
3
2
1
0
Ta [ C]
I
OPE
[A]
40
25 0 25 50 7585
Ta [C]
0.16
0.14
0.12
0.10
0.08
0.06
0
I
PDN
[A]
0.04
0.02
1. 3 IOPE vs. VDD
0 2 4 6
V
DD
[V]
6
5
4
3
2
1
0
I
OPE
[A]
8
2. Overcharge detection / release voltage, overdischarge detection / release voltage,
overcurrent detection voltage, and delay time
2. 1 VCU vs. Ta 2. 2 VCL vs. Ta
40 25 0 25 50 75 85
Ta [ C]
4.350
4.345
4.340
4.335
4.330
4.325
4.300
V
CU
[V]
4.320
4.315
4.310
4.305
40
25 0 25 50 75 85
Ta [C]
4.125
4.115
4.105
4.095
4.085
4.075
4.025
V
CL
[V]
4.065
4.055
4.045
4.035
2. 3 VDU vs. Ta 2. 4 VDL vs. Ta
40 25 0 25 50 75 85
Ta [ C]
2.95
2.94
2.93
2.92
2.91
2.90
2.85
V
DU
[V]
2.89
2.88
2.87
2.86
40
25 0 25 50 7585
Ta [ C]
2.60
2.58
2.56
2.54
2.52
2.50
2.40
V
DL
[V]
2.48
2.46
2.44
2.42
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
31
2. 5 tCU vs. Ta 2. 6 tDL vs. Ta
40 25 0 25 50 7585
Ta [C]
1.50
1.45
1.40
1.35
1.30
1.25
1.00
t
CU
[s]
1.20
1.15
1.10
1.05
40
25 0 25 50 7585
Ta [C]
200
190
180
170
160
150
100
t
DL
[ms]
140
130
120
110
2. 7 VDIOV vs. Ta 2. 8 tDIOV vs. VDD
40 25 0 25 50 75 85
Ta [ C]
0.175
0.170
0.165
0.160
0.155
0.150
0.125
V
DIOV
[V]
0.145
0.140
0.135
0.130
3.0 3.5 4.0 4.5
VDD [V]
14
13
12
11
10
9
4
tDIOV [ms]
8
7
6
5
2. 9 tDIOV vs. Ta 2. 10 VCIOV vs. Ta
40 25 0 25 50 75 85
Ta [C]
14
13
12
11
10
9
4
tDIOV [ms]
8
7
6
5
40
25 0 25 50 7585
Ta [C]
0.05
0.06
0.07
0.08
0.09
0.10
0.15
V
CIOV
[V]
0.11
0.12
0.13
0.14
2. 11 tCIOV vs. VDD 2. 12 tCIOV vs. Ta
3.0 3.5 4.0 4.5
V
DD
[V]
14
13
12
11
10
9
4
t
CIOV
[ms]
8
7
6
5
14
13
12
11
10
9
4
t
CIOV
[ms]
8
7
6
5
40
25 0 25 50 75 85
Ta [C]
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
32
2. 13 VSHORT vs. Ta 2. 14 tSHORT vs. VDD
0.75
0.70
0.65
0.60
0.55
0.50
0.25
V
SHORT
[V]
0.45
0.40
0.35
0.30
40 25 0 25 50 7585
Ta [ C]
3.0 3.5 4.0 4.5
V
DD
[V]
0.65
0.63
0.61
0.59
0.57
0.55
0.45
t
SHORT
[ms]
0.53
0.51
0.49
0.47
2. 15 tSHORT vs. Ta
40 25 0 25 50 7585
Ta [C]
1.0
0.9
0.8
0.7
0.6
0.5
0
t
SHORT
[ms]
0.4
0.3
0.2
0.1
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
33
3. CO pin / DO pin
3. 1 ICOH vs. VCO 3. 2 ICOL vs. VCO
0
0.1
0.2
0.5
I
COH
[mA]
0.3
0.4
0 1 2 3 4
V
CO
[V]
0.5
0.4
0.3
0
I
COL
[mA]
0.2
0.1
0 1 2 3 4
V
CO
[V]
3. 3 IDOH vs. VDO 3. 4 IDOL vs. VDO
0 1 2 3 4
VDO [V]
0
0.05
0.10
0.15
0.30
IDOH [mA]
0.20
0.25
0 0.5 1.0 1.5
VDO [V]
0.20
0.15
0.10
0
IDOL [mA]
0.05
BATTERY PROTECTION IC FOR 1-CELL PACK
S-8211C Series Rev.7.7_03
34
Marking Specifications
1. SOT-23-5
123
45
Top view
(1) (2) (3) (4)
(1) to (3): Product code (refer to Product name vs. Product code)
(4): Lot number
Product name vs. Product code
Product Name Product Code
(1) (2) (3)
S-8211CAA-M5T1x R Z A
S-8211CAB-M5T1x R Z B
S-8211CAD-M5T1x R Z D
S-8211CAE-M5T1x R Z E
S-8211CAF-M5T1x R Z F
S-8211CAH-M5T1x R Z H
S-8211CAI-M5T1x R Z I
S-8211CAJ-M5T1x R Z J
S-8211CAK-M5T1x R Z K
S-8211CAL-M5T1x R Z L
S-8211CAM-M5T1x R Z M
S-8211CAN-M5T1x R Z N
S-8211CAO-M5T1x R Z O
S-8211CAP-M5T1x R Z P
S-8211CAQ-M5T1x R Z Q
S-8211CAR-M5T1x R Z R
S-8211CAS-M5T1x R Z S
S-8211CAT-M5T1x R Z T
Product Name Product Code
(1) (2) (3)
S-8211CAU-M5T1x R Z U
S-8211CAV-M5T1x R Z V
S-8211CAY-M5T1x R Z Y
S-8211CAZ-M5T1x R Z Z
S-8211CBV-M5T1x R 7 V
S-8211CCD-M5T1U R 8 D
S-8211CCJ-M5T1U R 8 J
S-8211CCK-M5T1U R 8 K
S-8211CCQ-M5T1U R 8 Q
S-8211CCR-M5T1U R 8 R
S-8211CCT-M5T1U R 8 T
S-8211CCV-M5T1U R 8 V
S-8211CCW-M5T1U R 8 W
S-8211CDB-M5T1U R 6 B
S-8211CDD-M5T1U R 6 D
S-8211CDG-M5T1U R 6 G
S-8211CDJ-M5T1U R 6 J
S-8211CDN-M5T1U R 6 N
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
BATTERY PROTECTION IC FOR 1-CELL PACK
Rev.7.7_03 S-8211C Series
35
2. SNT-6A
Top view
132
645
(1) (2) (3)
(4) (5) (6)
(1) to (3): Product code (refer to Product name vs. Product code)
(4) to (6): Lot number
Product name vs. Product code
Product Name Product Code
(1) (2) (3)
S-8211CAA-I6T1U R Z A
S-8211CAB-I6T1U R Z B
S-8211CAD-I6T1U R Z D
S-8211CAE-I6T1U R Z E
S-8211CAF-I6T1U R Z F
S-8211CAH-I6T1U R Z H
S-8211CAI-I6T1U R Z I
S-8211CAJ-I6T1U R Z J
S-8211CAK-I6T1U R Z K
S-8211CAL-I6T1U R Z L
S-8211CAM-I6T1U R Z M
S-8211CAN-I6T1U R Z N
S-8211CAO-I6T1U R Z O
S-8211CAP-I6T1U R Z P
S-8211CAQ-I6T1U R Z Q
S-8211CAR-I6T1U R Z R
S-8211CAS-I6T1U R Z S
S-8211CAT-I6T1U R Z T
S-8211CAU-I6T1U R Z U
S-8211CAV-I6T1U R Z V
S-8211CAW-I6T1U R Z W
S-8211CAX-I6T1U R Z X
S-8211CAY-I6T1U R Z Y
S-8211CAZ-I6T1U R Z Z
S-8211CBA-I6T1U R 7 A
S-8211CBB-I6T1U R 7 B
S-8211CBD-I6T1U R 7 D
S-8211CBF-I6T1U R 7 F
S-8211CBH-I6T1U R 7 H
S-8211CBJ-I6T1U R 7 J
S-8211CBN-I6T1U R 7 N
S-8211CBO-I6T1U R 7 O
Product Name Product Code
(1) (2) (3)
S-8211CBR-I6T1U R 7 R
S-8211CBV-I6T1U R 7 V
S-8211CBW-I6T1U R 7 W
S-8211CBZ-I6T1U R 7 Z
S-8211CCB-I6T1U R 8 B
S-8211CCC-I6T1U R 8 C
S-8211CCD-I6T1U R 8 D
S-8211CCE-I6T1U R 8 E
S-8211CCF-I6T1U R 8 F
S-8211CCG-I6T1U R 8 G
S-8211CCH-I6T1U R 8 H
S-8211CCI-I6T1U R 8 I
S-8211CCJ-I6T1U R 8 J
S-8211CCM-I6T1U R 8 M
S-8211CCN-I6T1U R 8 N
S-8211CCS-I6T1U R 8 S
S-8211CCU-I6T1U R 8 U
S-8211CCW-I6T1U R 8 W
S-8211CCX-I6T1U R 8 X
S-8211CCY-I6T1U R 8 Y
S-8211CCZ-I6T1U R 8 Z
S-8211CDA-I6T1U R 6 A
S-8211CDC-I6T1U R 6 C
S-8211CDE-I6T1U R 6 F
S-8211CDF-I6T1U R 6 E
S-8211CDH-I6T1U R 6 H
S-8211CDI-I6T1U R 6 I
S-8211CDK-I6T1U R 6 K
S-8211CDL-I6T1U R 6 L
S-8211CDM-I6T1U R 6 M
S-8211CDO-I6T1U R 6 O
S-8211CDP-I6T1U R 6 P
No.
TITLE
UNIT
ANGLE
ABLIC Inc.
2.9±0.2
1.9±0.2
0.95±0.1
0.4±0.1
0.16 +0.1
-0.06
123
4
5
No. MP005-A-P-SD-1.3
MP005-A-P-SD-1.3
SOT235-A-PKG Dimensions
mm
No.
TITLE
UNIT
ANGLE
ABLIC Inc.
ø1.5 +0.1
-0 2.0±0.05
ø1.0 +0.2
-0 4.0±0.1 1.4±0.2
0.25±0.1
3.2±0.2
123
45
No. MP005-A-C-SD-2.1
MP005-A-C-SD-2.1
SOT235-A-Carrier Tape
Feed direction
4.0±0.1(10 pitches:40.0±0.2)
mm
No.
TITLE
UNIT
ANGLE
ABLIC Inc.
12.5max.
9.0±0.3
ø13±0.2
(60°) (60°)
QTY. 3,000
No. MP005-A-R-SD-1.1
MP005-A-R-SD-1.1
SOT235-A-Reel
Enlarged drawing in the central part
mm
No.
TITLE
UNIT
ANGLE
ABLIC Inc.
mm
SNT-6A-A-PKG Dimensions
PG006-A-P-SD-2.1
No. PG006-A-P-SD-2.1
0.2±0.05
0.48±0.02
0.08 +0.05
-0.02
0.5
1.57±0.03
123
45
6
No.
TITLE
UNIT
ANGLE
ABLIC Inc.
Feed direction
4.0±0.1
2.0±0.05
4.0±0.1
ø1.5 +0.1
-0
ø0.5
1.85±0.05 0.65±0.05
0.25±0.05
mm
PG006-A-C-SD-2.0
SNT-6A-A-Carrier Tape
No. PG006-A-C-SD-2.0
+0.1
-0
1
2
4
3
56
No.
TITLE
UNIT
ANGLE
ABLIC Inc.
12.5max.
9.0±0.3
ø13±0.2
(60°) (60°)
QTY.
No. PG006-A-R-SD-1.0
PG006-A-R-SD-1.0
Enlarged drawing in the central part
SNT-6A-A-Reel
5,000
mm
No.
TITLE
UNIT
ANGLE
ABLIC Inc.
mm
SNT-6A-A
-Land Recommendation
PG006-A-L-SD-4.1
No. PG006-A-L-SD-4.1
0.3
0.2
0.52
1.36
0.52
1
2
Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package.
2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm
or less from the land pattern surface.
3. Match the mask aperture size and aperture position with the land pattern.
4. Refer to "SNT Package User's Guide" for details.
1. (0.25 mm min. / 0.30 mm typ.)
2. (1.30 mm ~ 1.40 mm)
0.03 mm
SNT
1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.).
2. Do not widen the land pattern to the center of the package ( 1.30 mm ~ 1.40 mm ).
1.
2. (1.30 mm ~ 1.40 mm)
(0.25 mm min. / 0.30 mm typ.)
Disclaimers (Handling Precautions)
1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4. Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5. Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7. The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8. The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9. In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
