motion sensor EKMCVZseries Current consumption 170A Digital output Economy type suitable for a wide range of applications Recommended applications Standard detection type Lighting control, lighting equipment, heaters, ventilators or air conditioners, security equipment for IP cameras, intrusion alarms, digital signage, vending machines, multi-function printers, display panels for meeting rooms, PCs Long distance detection type Lensless type available Wall installation type 170A type: EKMC1600100 Specifications Current consumption Detection performance Model no. Lens color Standard detection type EKMC1601111 White EKMC1601112 Black EKMC1601113 Pearl white EKMC1603111 Long distance detection type 170A Black EKMC1603113 Pearl white EKMC1604111 White EKMC1604112 Black EKMC1604113 Pearl white Ordering EKMC16 information Detection area Detection distance Horizontal Vertical Detection zones 5m 94 82 64 12m 102 92 92 12m1st step lens 6m2nd step lens 3m3rd step lens 40 105 68 White EKMC1603112 Wall installation type Output type Digital 1 Lens color PaPIRs motion sensor 0: Lensless / 1: White / 2: Black / 3: Pearl white Lens 0: Lensless / 1with lens DetectionLens 00: Lensless / 01: 5m distance standard / 03: 12m long distance / 04: Wall installation type Characteristics Timing chart Maximum rated values ON Items Value Power supply voltage Ambient temperature Storage temperature -0.3 to 7V -20 to +60 (no frost, no condensation) -20 to +70 Power supply OFF Present Detecting target Electrical characteristics Items Vdd 6.0V 3.0V Current consumption Ave (in standby mode) Note 1) Iw 170A Output current Max (during detection) Note 2) Iout Operating voltage Max Min Output voltage Min (during detection period) Vout Circuit stability time Max Twu (when voltage is applied) 7 Absent Symbol EKMCVZtype 100A Vdd0.5V 30 sec Conditions Ambient temperature: 25 Iout=0 Vdd: 5V Ambient temperature: 25 VoutVdd-0.5 Ambient temperature: 25 Open at no detection Ambient temperature: 25 Iout=0 Vdd: 5V Note 1) Current consumption during detection period is the total value of current consumption in standby mode add to output current. Note 2) Please select an output resistors (pull-down concept) in accordance with Vout so that the output current is lower than or equal to 100A. If the output current is more than 100A, this may cause false alarms. ON Output voltage OFF Twu Explanation of the timing Twu: Circuit stability time: max. 30 sec During this stage, the output s status is undefined (ON/OFF) and detection is therefore not guaranteed. Lenses for the EKMB/EKMC series Dimension Detection zone mm Detection characteristics Y Standard detection type 5m Y Detection distance Field of view Detection zone Detection condition 2.5m 9.5 CAD data (48.5 41 A A 13 0.45 0.05 5.6m X 14.4 4.6 11 VDD GND 454 6.6m X-Y Cross Section (48.5 41 P.C.D.5. 08 0.2 OUT SIDE VIEW 4 45 Max. 5m x82 94 64 beams The temperature difference between the target and the surroundings must be higher than 4. Movement speed: 1.0m/s 47 (53 Target concept: Human 47 (53 body with an approx. size of 700x250mm X A-A Cross sectional Target moving direction: Crossing the detection beam. TOP VIEW 5m Y 12m Long distance detection type 2.5m (49.5 46.3 Y CAD data Detection distance Field of view Detection zone Detection condition 5m 22 20.7 11.6m X 20.2 A A 7.3 0.45 0.05 P.C 4.6 11 .D. 5.0 8 0 13.8m X-Y Cross Section VDD .2 2.5 GND 46.3 (49.5 5 OUT 45 4 SIDE VIEW 4 45 Max. 12m x92 102 92 beams The temperature difference between the target and the surroundings must be higher than 4. Movement speed: 1.0m/s 51.3 (54 51.3 (54 Target concept: Human body with an approx. size of 700x250mm X Target moving direction: Crossing the detection beam. TOP VIEW 12m A-A Cross sectional Wall installation type 5m Detection distance Y 22 20.7 CAD data 5.7m 2nd step 18 25 A 20.2 A 0.45 0.05 4.6 X-Y Cross Section SIDE VIEW 11 .D. 5.0 8 0 3rd step 14.9m 44 5m 49 12m 7.3 P.C 1st step 4 VDD .2 2.5 GND 52.5 56 5 OUT 45 4 X Field of view Detection zone Detection condition 52.5 56 5m 4 45 TOP VIEW 12m 1st step lens Max. 12m 2nd step lens Max. 6m 3rd step lens Max. 3m x105 40 68 beams The temperature difference between the target and the surroundings must be higher than 4. Movement speed: 1.0m/s Target concept: Human body with an approx. size of 700x250mm Target moving direction: Crossing the detection beam. A-A Cross sectional PIR element Lensless type 3.0 0.6mm 3.0 Average: 5.6W/c Detection sensitivity 0.4mm 9.1 8.3 55 0.6mm Maximum: 7.6W/c ELEMENT 9.3 8.4 Detection sensitivity is measured by following system 0.6mm 0.6mm 0.4mm Test setup 0.45 0.05 5.5 P.C .D. 5.08 0 Black body 250 Aperture 3.2mm Masking plate PaPIRs VDD DC5V .2 GND OUT 45 4 340mm Chopper 1Hz 4 45 CAD data CAD data can be downloaded from the PaPIRs WEB site. Panasonic PaPIRs Recorder Search Please refer to the formal specification for the dimension, and the tolerance Please note that the horizontal and vertical field of view depends on the position of the metal tab on which the lens is mounted. 8 SATURN LENS - NEW Dual zone 90 90 44 44 Standard motion detection area 2.2m 1.8m Slight motion detection area o4.4m Standard and slight-motion detection type Choose by the current consumption in standby mode 1A (1A type: in sleep mode) 2A Choose by output 6A Digital 170A Digital Analog White EKMB1193111 EKMB1293111 EKMB1393111K EKMC1693111 By request Black EKMB1193112 EKMB1293112 EKMB1393112K EKMC1693112 By request Pearl white EKMB1193113 EKMB1293113 EKMB1393113K EKMC1693113 By request Choose by lens color Saturn lens Dimension Detection zone (mm) Standard and slightmotion detection type Detection characteristics Detection distance Vertical Slight motion detection area CAD data by request 14.9 14.1 17.2 7.9 A (0.018 dia) 4.6 0.45 0.05 11 P.C.D 5.08 0.2 Max. 2.2m* Slight motion Standard motion Slight motion Standard motion 2 4.5 GND OUT 45 4 44 x 44 90 x 90 36 48 * The temperature difference between the target and the surroundings must be higher than 4C. * Movement speed: 0.5ms * Target concept: Human head with an approx. size of 200x200mm * Target moving direction: Crossing the detection beam, 1 zone Standard motion * The temperature VDD 4 Field of view Detection zone Detection Slight motion condition A 45 Standard motion detection area Horizontal difference between the target and the surroundings must be higher than 4C. * Movement speed: 1.0ms * Target concept: Human body with an approx. size of 400x200mm * Target moving direction: Crossing the detection beam, 2 zones * Under specified detection conditions Please refer to "Caution for use" (page 13) and "Basic principles"(page 13, point 5), for more details Please contact your local sales representative for detailed specifications.