UNISONIC TECHNOLOGIES CO., LTD MMBT2907A PNP EPITAXIAL PLANAR TRANSISTOR PNP GENERAL PURPOSE AMPLIFIER 3 FEATURES 2 This UTC MMBT2907A is designed for use as a general purpose amplifier and switch requiring collector currents to 500 mA. 1 SOT-23 3 2 1 SOT-323 *Pb-free plating product number: MMBT2907AL ORDERING INFORMATION Order Number Normal Lead Free Plating MMBT2907A-AE3-6-R MMBT2907AL-AE3-6-R MMBT2907A-AL3-6-R MMBT2907AL-AL3-6-R Package SOT-23 SOT-323 Pin Assignment 1 2 3 E B C E B C Packing Tape Reel Tape Reel MARKING 2F www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., Ltd 1 of 6 QW-R220-001,B MMBT2907A PNP EPITAXIAL PLANAR TRANSISTOR ABSOLUTE MAXIMUM RATING (NOET 1) (Ta=25 unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-Emitter Voltage VCEO -60 V Collector-Base Voltage VCBO -60 V Emitter-Base Voltage VEBO -5 V Collector Current-Continuous IC -800 mA Operating Junction and Storage Temperature TJ, TSTG -55 ~ +150 Note 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. 2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL SOT-23 SOT-323 Thermal Resistance Junction-Case RATINGS 357 455 JA UNIT C/W C/W ELECTRICAL CHARACTERISTICS (Ta=25 unless otherwise specified) PARAMETER OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Base Cutoff Current Collector Cutoff Current Collector Cutoff Current SYMBOL BVCEO BVCBO BVEBO IB ICEX ICBO TEST CONDITIONS IC=-10mA, IB=0 IC=-10A, IE=0 IE=-10A , IC=0 VCB=-30V, VEB=-0.5V VCE=-30V, VBE=-0.5V VCB=-50V, IE=0 VCB=-50V, IE=0, TA=150 MIN TYP MAX UNIT -60 -60 -5 -50 -50 -0.02 -20 V V V nA nA A A ON CHARACTERISTICS DC Current Gain hFE Collector-Emitter Saturation Voltage* VCE(SAT) Base-Emitter Saturation Voltage VBE(SAT) SMALL SIGNAL CHARACTERISTICS Current Gain - Bandwidth Product Output Capacitance Input Capacitance SWITCHING CHARACTERISTICS Turn-on Time Delay Time Rise Time Turn-off Time Storage Time Fall Time THERMAL CHARACTERISTICS Total Device Dissipation fT Cobo Cibo tON td tr toff ts tf IC=-0.1mA, VCE=-10V IC=-1.0 mA, VCE=-10V IC=-10 mA, VCE=-10V IC=-150 mA, VCE=-10V* IC=-500 mA, VCE=-10V* IC=-150 mA, IB=-15mA IC=-500 mA, IB=-50mA IC=-150 mA, IB=-15mA* IC=-500 mA, IB=-50mA 75 100 100 100 50 IC=-50mA, VCE=-20V, f=100MHz VCB=-10V, IE=0, f=100kHz VEB=-2V, IC=0, f=100kHz 200 VCC=30V, IC=-150mA, IB1=-15mA VCC=6V, IC=-150mA, IB1= IB2=-15mA PD SOT-23 SOT-323 300 -0.4 -1.6 -1.3 -2.6 V V V V 8 30 MHz pF pF 45 10 40 100 80 30 ns ns ns ns ns ns 350 275 mW mW * Pulse Test: Pulse Width 300ms, Duty Cycle2.0% Note: Device mounted on FR-4 PCB 1.6" x 1.6" x 0.06." UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R220-001,B MMBT2907A PNP EPITAXIAL PLANAR TRANSISTOR TEST CIRCUIT UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 6 QW-R220-001,B Capacitance (pF) Base-Emitter On Voltage, VBE(ON) (V) Base-Emitter Voltage, VBESAT (V) Collector-Emitter Voltage, VCESAT (V) Typical Pulsed Current Gain, hFE Collector Current, ICBO (nA) MMBT2907A UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw PNP EPITAXIAL PLANAR TRANSISTOR TYPICAL CHARACTERISTICS QW-R220-001,B 4 of 6 MMBT2907A TYPICAL CHARACTERISTICS(Cont.) Time (ns) Time (ns) PNP EPITAXIAL PLANAR TRANSISTOR -50 Rise Time vs Collector And Turn On Base Currents -20 -10 -5 tr=15V 30ns -2 60ns -1 0 -100 Collector Current, IC (mA) -500 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R220-001,B MMBT2907A Common Emitter Characteristics Char.Relative To Voltage At IC=10mA TYPICAL COMMON EMITTER CHARACTERISTICS (f=1kHz) Char.Relative To Voltage At TA=25 PNP EPITAXIAL PLANAR TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R220-001,B