1 2 3 4 NOTES: 0.25 max A 1-Material:phosphor bronze,thickness 0.20 2-Finish on contact area:see table finish on termination:bright tin over nickel 3-Wire range:20 to 24 AWG 4-Max outer dia of wire insulator:1.73 mm 5-Current carrying capacity per contact: 5.Amps max when crimped to #20 AWG 5 Amps max when crimped to #22 AWG 3 Amps max when crimped to #24 AWG 6-After 5 insertions into connector, contact retention must be 5 pounds axial load min 7-When contact is crimped to 20 AWG,the insulation support crimped height must be 1.78 mm max to ensure a proper insertion into housing 8-Reel should be continous without any contacts missing in between 9-Packaging:Reel of 400 contacts B A B 2.16 max A B A B NOTE : ROHS INFORMATIONS The LF products meet European union directives and other country regulations as described in GS-22-008 Terminations plating spec : 2um Nickel min + 2um Sn min Packaging Spec : see GS-14-920 1.65 +0.1 0 9.45 max 14.20 max 1.8 0.1 C 2.48 0.2 Copyright FCI. PULL PART 1.75 0.2 86563006067LF 0.4 Au / GXT 86563006067 0.4 Au / GXT 86563006065LF 0.76 Au / GXT 86563006065 0.76 Au / GXT Plating surface A-A B-B www.fciconnect.com ISO 1302 tolerance std ISO 406 projection mm ISO 1101 TOLERANCES UNLESS OTHERWISE SPECIFIED Dr D - rev ecn no C LS06-196 D dr date MPE 27/11/2006 LS08-0127 MPE 2008/05/13 E I09-0152 AMR 2009-07-27 F I10-0070 AMR 2010-03-09 G I11-0003 AMR 2011-01-06 - - - - - - - - C JARRY 28/01/97 Eng Chr ANGULAR 0 LINEAR 2 0.X 0.3 0.XX 0.1 0.XXX 0.05 Product family Appr CRIMP CONTACTS - catalog no Scale size A3 ECN D 10:1 I11-0003 8656 Spec ref dwg no SECTION SECTION title 1.9 0.1 PART NUMBER C Rev. C01-8656-1532 CUSTOMER sheet G 1 of 1 REV F - 2006-04-17 1 2 3 PDM: Rev:G 4 STATUS:Released Printed: Mar 05, 2011.