3.0x1.0 mm SMD CHIP LED LAMP Part Number: APECVA3010QBC/D PRELIMINARY SPEC Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0mmx1.0mm SMT LED, 2.0mm thickness. The Blue source color devices are made with AlGaInN on z Low power consumption. Sapphire Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for back light and indicator. It is recommended to use a wrist band or anti-electrostatic z Package : 2000pcs / reel. glove when handling the LEDs. z Moisture sensitivity level : level 3. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ1860 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1203009104 Selection Guide Part No. Dice APECVA3010QBC/D Lens Type Blue (AlGaInN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 36 90 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Blue D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 25 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ1860 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1203009104 Blue APECVA3010QBC/D SPEC NO: DSAJ1860 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1203009104 APECVA3010QBC/D Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ1860 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1203009104 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ1860 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu APECVA3010QBC/D DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1203009104