SPEC NO: DSAJ1860 REV NO: V.1 DATE: MAR/19/2009 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203009104
3.0x1.0 mm SMD CHIP LED LAMP
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APECVA3010QBC/D Blue
Features
z3.0mmx1.0mm SMT LED, 2.0mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for back light and indicator.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Blue source color devices are made with AlGaInN on
Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3.Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ1860 REV NO: V.1 DATE: MAR/19/2009 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203009104
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APECVA3010QBC/D Blue (AlGaInN) WATER CLEAR 36 90 120°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Blue 468 nm IF=20mA
λD [1] Dominant Wavelength Blue 470 nm IF=20mA
Δλ1/2 Spectral Line Half-width Blue 25 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VF [2] Forward Voltage Blue 3.3 4 V IF=20mA
IR Reverse Current Blue 10 uA VR=5V
Parameter Blue Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAJ1860 REV NO: V.1 DATE: MAR/19/2009 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203009104
Blue APECVA3010QBC/D
SPEC NO: DSAJ1860 REV NO: V.1 DATE: MAR/19/2009 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203009104
APECVA3010QBC/D
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
SPEC NO: DSAJ1860 REV NO: V.1 DATE: MAR/19/2009 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.P.Chen ERP: 1203009104
PACKING & LABEL SPECIFICATIONS APECVA3010QBC/D