96 MHz SAW Filter
20 MHz Bandwidth
Part Number: SF0096BA03001S
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0096BA03001S Rev A 22-Feb-2010
ECN 36650 Page 1 of 3
DESCRIPTION
• 96 MHz SAW bandpass filter with 20 MHz bandwidth for WCDMA applications.
• 13.3 x 6.5 mm SMP.
• RoHS compliant.
TYPICAL PERFORMANCE
Horizontal: Frequency : 8 MHz/div
Vertical from top: Relative Magnitude : 10 dB/div
Relative magnitude : 1 dB/div
Phase Linearity: 5 deg/div
Group Delay : 50 ns/div
S11 (56 to 136 MHz) S22 (56 to 136 MHz)
50. ns/"
96 MHz SAW Filter
20 MHz Bandwidth
Part Number: SF0096BA03001S
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0096BA03001S Rev A 22-Feb-2010
ECN 36650 Page 2 of 3
SPECIFICATION
Paramete
r
Min T
yp
Max Units
Center Frequency ( Fc) 1 - 96 - MHz
Insertion Loss
2
- 14 15.5 dB
0.6 dB Bandwidth
3
20 22.8 - MHz
40 dB bandwidth - 31.5 35 MHz
Amplitude Ripple (86 to 106 MHz) - 0.6 0.8 dB p-p
Amplitude Ripple in any 3.84 MHz band (86 to 106 MHz) - 0.3 0.6 dB p-p
Phase Linearity (86 to 106 MHz) - 3 7 deg p-p
Group Delay Variation (86 to 106 MHz) - 20 50 ns
Absolute Delay - 0.89 - us
Rejection (0.3 to 10 MHz) 3 25 50 - dB
Rejection (10 to 68 MHz) 3 45 50 - dB
Rejection (68 to 78.5 MHz) 3 40 45 - dB
Rejection (113.5 to 124 MHz) 3 40 45 - dB
Rejection (124 to 160 MHz) 3 45 52 - dB
Rejection (160 to 500 MHz) 3 25 27 - dB
Ambient Temperature 20 25 30 ˚C
Temperature Coefficient of Frequency - -90 - ppm/˚C
Source and Load Impedance 50 Ω
Notes: 1. Average of lower and upper 3 dB frequencies (3 dB measured from peak).
2. Average loss over 86 to 106 MHz.
3. Reference 0 dB at insertion loss level.
MAXIMUM RATINGS
Parameter Min Max Units
Storage Temperature Range -40 85 ˚C
Operating Temperature Range -40 85 ˚C
Operating Input Power Level - +10 dBm
MATCHING CIRCUIT
Typical component values:
Notes:
1. Recommend use of +/- 2% tolerance components. Minimum Q=40.
2. Component values are for reference only and may change depending on board layout.
Lp1 = 820 nH Ls2 = 68 nH
Ls1 = 82 nH
Input
50 Ω
Single-ended
Output
50 Ω
Single-ended
11 5
12 6
96 MHz SAW Filter
20 MHz Bandwidth
Part Number: SF0096BA03001S
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0096BA03001S Rev A 22-Feb-2010
ECN 36650 Page 3 of 3
PACKAGE OUTLINE SUGGESTED FOOTPRINT
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice.
© 2010 All rights reserved.
Units: mm
Tolerances are ±0.15 mm except
for the overall length, width and
pad dimensions, which are nominal
values.
Pad Configuration:
Input: 11
Input return: 12
Output: 5
Output return: 6
Ground: all other pads
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm min,
over a 1.3-8.9 µm Ni plating
