Oscilloscopes Calibrator Digital Power Analyzers CA700 Pressure Calibrator High Accurate and High Functional Pressure Calibrator Specially Designed for the Calibration of Differential Pressure and Pressure Transmitters. Generators, Sources, Manometers etc. Features Calibrator Optical Measuring Instruments * Basic accuracy: Pressure (measurement) 0.01% rdg Current (source/measurement) 0.015% rdg Voltage (source/measurement) 0.015% rdg * Widest range and highest resolution in class achieved 200 kPa gauge pressure model (resolution 0.001 kPa) 1000 kPa gauge pressure model (resolution 0.01 kPa) 3500 kPa gauge model (resolution 0.01 kPa) * DC mA signals can be measured by supplying power to the transmitter from a 24V DC power supply. * Calibration procedures of pressure transmitters and pressure switches are embedded. "As Found", " As Left" data and error rate (%) can be recorded. * IP54 dustproof and waterproof robust case enables use in harsh environments. * Hart and Brain communication resistance is embedded. * Dimensions: Approx. 264 (W) x 188 (H) x 96 (D) mm Weight: Approx. 2 kg (including 6 AA size batteries) New product CA700 Detailed catalog: Bulletin CA700-EN Data Logger Main Specifications Pressure Measurement Model CA700-E-01 CA700-E-02 Pressure type Example of field calibration of differential pressure and pressure transmitter CA700-E-03 Gauge Measurement Positive pressure 0 to 200 kPa Positive pressure 0 to 1,000 kPa Positive pressure 0 to 3,500 kPa range Negative pressure -80 to 0 kPa Negative pressure -80 to 0 kPa Negative pressure -80 to 0 kPa Digital Multimeter Clamp-on Power Meter Measurement display range Measurement accuracy (6 months after calibration) (Tested after zero calibration) Measurement fluid Pressure display units Up to 240.000 kPa Up to 1,200.00 kPa Positive pressure 20 to 200 kPa: Positive pressure (0.01% of reading + 0.003 kPa) (0.01% of reading + 0.04 kPa) 0 to 20 kPa: 0.005 kPa Negative pressure (0.2% of reading + 0.090 kPa) Calibration of pressure transmitters is required to accurately measure the input and output values and to calculate the error rate. The CA700 ensures reliable calibration with its function to accurately measure the input and output values of pressure and current. Additionally its embedded calibration procedures enable users to perform certain calibration following the prescribed procedure. Up to 4,200.00 kPa Positive pressure (0.01% of reading + 0.15 kPa) Negative pressure (0.2% of reading + 0.08 kPa) Negative pressure (0.2% of reading + 0.08 kPa) Gas and liquid (non-corrosive, non-flammable, non-explosive, and non-toxic fluids) kPa and other units (Pa, hPa, MPa, mbar, bar, atm, mmHg, inHg, gf/cm2, kgf/cm2, mmH2O@4C, mmH2O@20C, ftH2O@4C, ftH2O@20C, inH2O@4C, inH2O@20C, Torr, psi) Input port Rc 1/4 or 1/4 NPT female thread (selectable) Insulation Tester Clamp-on Tester Current and Voltage Measurement (common to all models) DC current DC voltage 0 to 20.000 mA (0.015% of reading + 3 A) 0 to 100.00 mA (0.015% of reading + 30 A) 0 to 5.0000 V (0.015% of reading + 0.5 mV) 0 to 50.000 V (0.015% of reading + 5 mV) 24 V Loop power supply Supply voltage 24 V 1 V Load current 24 mA when communication resistance OFF 24 V 6 V Load current 20 mA when communication resistance ON Hand pump Current and voltage source (common to all models) DC current* 0 to 20.000 mA (0.015% of setting + 3 A) DC voltage 0 to 5.0000 V (0.015% of setting + 0.5 mV) Differential pressure and pressure transmitter Earth Tester, Other Products * External power supply for 20 mA SIMULATE: 5 to 28 V Hand Pump Series Three High-Performance Hand Pump Models Available Thermometer Features Meters Products Precision Measuring Instruments * Smooth pressurization with less internal leaking * Strainer preventing debris from entering the pump included * Low Pressure Hand Pump Pressure generation range: -83 to 700 kPa Ultra-compact hand pump * Pneumatic Hand Pump Pressure generation range: -83 to 4,000 kPa High-performance small hand pump with a wide range of pressure generation *Hydraulic Hand Pump Pressure generation range: 0 to 70 MPa High-performance hand pump capable of generating a pressure of up to 70 MPa Model 91050 Model 91055 Model 91060 Detailed catalog: Bulletin CA700-EN Product name Model Description of kit (individual models) Hand Pump Kit (Low pressure) 91050 Hand Pump (91051), Connector Set (91052), Case (93052) Hand Pump Kit (Pneumatic) 91055 Hand Pump (91056), Connector Set (91057), Case (93053) Hand Pump Kit (Hydraulic) 91060 Hand Pump (91061), Connector Set (91062), Case (93053) 56