371-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
LZSA Series
Features
5 Year Warranty
-40ºC to +71ºC Operation
MIL-STD-810E Vibration / Shock
Input transient protected
UL508, SEMIF47, Factory Mutual (Class 1, Division 2)
Rugged mechanical design with coating on pcbs
Superior thermal design
Wide range adjustment of output
Single Output Industrial Power Supplies
Model LZSA500 LZSA1000 LZSA1500
Input Voltage (47-440Hz) (*) - 85 - 265VAC (LZSA1500 - see output derating graphs on page 2), 100-380VDC (1)
Inrush Current (110 / 220VAC) A 25 / 45A 30 / 40A
Power Factor - EN61000-3-2 Class A
Effi ciency (typical) % 84%
Ripple & Noise (Pk-Pk)(max) - 75mV 75mV 24V: 75mV; 48V: 150mV
Line Regulation % 0.1%
Load Regulation % 0.1%
Transient Response - ±1% deviation, recovering to ±0.2% in <1.25ms (25% load change)
Overcurrent Protection - 110 - 130%
Overvoltage Protection V User adjustable from front panel
Thermal Protection - Internal thermostat. Recycle AC to reset
Hold Up Time at 110VAC ms 20ms Hold Up, 20ms Ride Through
Remote Sense - Compensates for a total of 1V cable drop
Remote Adjust - Using front panel potentiometer, Resistance (1k/V), or Voltage (1V/V)
Remote On / Off - TTL compatible, active high
Signals - Optocoupled transistor for AC Fail, DC Good, Inverter OK. 200kHz sync signal (Ref-sense)
Indicators - Green LED indicates output good, red LED indicates overvoltage or over temperature
Parallel Connection - Single wire current share
Operating Temperature ºC -40º to +71ºC, derate linearly to 60% load from 60ºC~71ºC (20 min warm up period needed for <-30ºC)
Storage Temperature ºC -40º to +85ºC
Temperature Coeffi cient - 0.01%/ºC
Humidity (non condensing) %RH 10 - 90%RH
Cooling - Internal fan
Withstand Voltage - Input - Ground 2,121VDC, Input - Output 4,242VDC, Output - Ground 500VDC
Vibration - MIL-STD-810E, Method 514.4, Category 1, 9
Shock - MIL-STD-810E, Method 516.4 Proc. I, II, IV, VI
Safety Agency Certifi cations - UL/CSA60950-1, UL508, EN60950-1, FM 3600, 3611, 3810, & CE Mark. SEMIF47(>100VAC)
Leakage current uA <500uA at 265VAC, 60Hz
Emissions - EN55022/EN55011 Class B, EN61000-3-3, MIL STD 461/462D CE102
Immunity - EN61000-4-2, -3, -4, -5, -6, -8, -11. IEEE C62.41 (6kV/30 Ohm, Criteria A)
Altitude m 3,000m operating, 12,000m non operating
Weight lbs 6.5 8.1
Size (WxHxD)(w/o bus bars) ins 4.25 x 4.75 x 10.25 5.62 x 4.75 x 10.5
Warranty yrs Five Years
Specifi cations
(1) Startup > 110VDC
Notes: (Consult Installation Manual for detailed specifi cations, test methods and application notes) (*) Reduced power factor above 63Hz
Key Market Segments & Applications