DESCRIPTION
MC2836 is a super mini package plastic seal type silicon
epitaxial type double diode,especially designed for high speed switching
application.
Due to the small pin capacitance,short switching time(reverse
recovery
time),It is most suitable for high speed switching application and
limitter,clipper application.
FEATURE
● Small pin capacitance
● Quick switching time
●High voltage
●Series connected two elements
●Good two element characteristics
● Double and super mini package for mounting
APPLICATION
For general high speed switching of audio machine,VCR.
Marking
Internal connection
〈SMALL-SIGNAL DIODE〉
MC2836
FOR HIGH SPEED SWITCHING APPLICATION
SILICON EPITAXIAL TYPE(COMMON ANODE)
OUTLINEDRAWING
Unit：ｍｍ
MAXIMUM RATINGS（Ta=25℃）
Symbol Parameter Ratings Unit
VRM Peak reverse voltage 75 V
VR DC reverse voltage 50 V
I FSM Surge current（１μｓ） 4 A
I FM Peak forward current 300 mA
I O Average rectification
current 100 mA
PT Total allowance
dissipation(Ta=25℃) 200 mW
Tｊ Junction temperature ＋150 ℃
Tstg Storage temperature -55～＋150 ℃
JEITA：SC-59
JEDEC：TO-236 resemblance
TERMINAL CONNECTER
①：CATHODE1
②：CATHODE2
③： ANODE(COMMON)
0.16
0～0.1
0.8
1.1
0.4
0.5 1.5 0.5
2.5
0.95 0.95
1.90
2.9
①
②③
A ４
①②
③
①②
③
ISAHAYA ELECTRONICS CORPORATION
D1 D2
MC2836
FOR HIGH SPEED SWITCHING APPLICATION
SILICON EPITAXIAL TYPE(COMMON ANODE)
ELECTRICAL CHARACTERISTICS（Ta=25℃）
Limits
Parameter Symbol Test conditions Min Min Min Uniit
VF1 I
F=10mA - 0.77 0.9
VF2 I
F=50mA - 0.90 1.0
Forward voltage
VF3 I
F=100mA - 0.95 1.2
V
Reverse current IR V
R=50V - - 0.1 μA
Pin capacitance Cｔ VR=0V，f=1MHz - 2.8 4.0 pF
Reverse recovery time trr (Refer to test circuit) - － 4.0 ns
TRI GGER
IF=10mA,VR=6V
3kΩ RL=50Ω
+trr=0.1lr REVERSE RECOVERY
TIME FOR 0.1 Ir
-
● INPUT VOLTAGE WAVE FORM ●CURRENT WAVE FORM IN DIODE
V
FIF
VRIr
0.1lr
trr
SUPPLY
(Zout=50Ω） OSCILLOSCOPE
（Zin=50Ω）
DC POWER
0.02μF D.U.T
PULSE GENERATER
SAMPLING
0 0
ISAHAYA ELECTRONICS CORPORATION
MC2836
FOR HIGH SPEED SWITCHING APPLICATION
SILICON EPITAXIAL TYPE(COMMON ANODE)
ISAHAYA ELECTRONICS CORPORATION
Marketing division, Marketing planning department
6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs!
·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or
property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures
such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunct
ion or
mishap.
Notes regarding these materials
·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to
the
customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging
ISAHAYA or third party.
·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights
,
originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
·All information contained in these materials, including product data, diagrams and charts, represent information on products
at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation
without notice
due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics
Corporation or an authorized ISAHAYA products distr ibutor for the latest product information
before purchasing product listed
herein.
·
ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used
under circumstances in which human lif
e is potentially at stake. Please contact ISAHAYA electronics corporation or an
authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes
,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
·
The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these
materials.
·If these products or technolo
gies are subject to the Japanese export control restrictions, they must be exported under a
license from the Japanese government and cannot be imported into a country other than the approved destination. Any
diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products
distributor for further details on these
materials or the products contained therein.
Jan.2003
