Han(R) Q High Density Size 3 A ~50 V / 120 V 6.5 A Number of contacts 21 Part number Identification Male insert (M) Female insert (F) Drawing Dimensions in mm Crimp terminal Order crimp contacts separately M 09 12 021 3001 09 12 021 3101 F Identification Part number Drawing Dimensions in mm Insertion / removel tool for D-Sub crimp contacts 09 99 000 0368 Han(R) Data Sheet 0730 Han(R) Q High Density Features Technical characteristics * Heavy duty connector for D-Sub signal contacts * Suitable for all Han(R) 3 A hoods/housing types: Standard (metal, plastic), EMC, INOX, M and HPR * High contact density at small foot print * Easy handling of signal connectors in industrial environment * One preleading contact Inserts Number of contacts Electrical data acc. to EN 61 984 Rated current Rated voltage AC Rated voltage DC Rated impulse voltage Pollution degree Insulation resistance Material Limiting temperatures Mechanical working life - mating cycles Contacts Current Carrying Capacity Operating current (A) The current carrying capacity of the connectors is limited by the thermal load capability of the contact element material including the connections and the insulating parts. The derating curve is therefore valid for currents which flow constantly (non-intermittent) through each contact element of the connector evenly, without exceeding the allowed maximum temperature. Measuring and testing techniques according to DIN EN 60 512-5 Material Surface - selectively gold plated Crimp termination - mm - AWG wire gauge: 0.14 mm wire gauge: 0.25 mm wire gauge: 0.5 mm stamped contacts stamped contacts turned contacts 6.5 A ~50 V / 120 V 0.8 kV 3 6.5 A ~50 V 120 V 0.8 kV 3 1010 polycarbonate -40 C ... 125 C according to performance level of used contacts copper alloy according to performance level 0.09 mm ... 0.56 mm 28 ... 20 Hoods/Housings Detailed information and further hoods/housings types see catalog "Industrial Connectors Han(R)", chapter 31 Plastic hoods/housings Material Flammability acc. to UL 94 Degree of protection acc. to DIN EN 60 529 for coupled connector Metal hoods/housings Material Degree of protection acc. to DIN EN 60 529 for coupled connector Ambient temperature (C) 21 polycarbonate V0 IP 67 zinc die-cast IP 44 IP 67 is achieved with seal screw 09 20 000 9918 Han(R) Q High Density Contacts Contacts Identification Wire gauge Part number (mm) Male contact Female contact Drawing Dimensions in mm Individual contacts, turned Performance level 1 0.09-0.25 0.13-0.33 0.25-0.52 09 67 000 7576 09 67 000 5576 09 67 000 8576 09 67 000 7476 09 67 000 5476 09 67 000 8476 0.09-0.25 0.25-0.56 09 67 000 7176 09 67 000 8176 09 67 000 7276 09 67 000 8276 Wire gauge 0.09-0.25 mm 0.13-0.33 mm 0.25-0.52 mm AWG 28-24 AWG 26-22 AWG 24-20 O* Stripping length 1.7 1.7 1.7 4 mm 4 mm 4 mm O* Stripping length 1.02 1.52 2.5 mm + 0.5 2.5 mm + 0.5 O* Stripping length 1.02 1.52 2.5 mm + 0.5 2.5 mm + 0.5 O* Stripping length 1.02 1.52 2.5 mm + 0.5 2.5 mm + 0.5 Individual contacts, stamped Performance level 1 Wire gauge 0.09-0.25 mm 0.25-0.56 mm AWG 28-24 AWG 24-20 500 pieces/reel Performance level 1 Unrolling left 0.09-0.25 0.25-0.56 09 67 000 7166 09 67 000 8166 09 67 000 7266 09 67 000 8266 Wire gauge 0.09-0.25 mm 0.25-0.56 mm AWG 28-24 AWG 24-20 10,000 pieces/reel Performance level 1 Unrolling left 0.09-0.25 0.25-0.56 09 67 000 7156 09 67 000 8156 09 67 000 7256 09 67 000 8256 Wire gauge 0.09-0.25 mm 0.25-0.56 mm AWG 28-24 AWG 24-20 HARTING Electric GmbH & Co. KG | Wilhelm-Harting-Strae 1 | D-32339 Espelkamp Phone: +49 5772 47-97100 | Fax: +49 5772 47-495 Internet: www.HARTING.com | E-Mail: electric@HARTING.com *) O = max. isolation diameter 2012-11-12