Full Color SMT Chip LED (3.5 x 3.0 x 1.4 mm) OVSTRGBFC6 x x x x Red/green/blue + white in single surface mount package 8 mm tape on 7" reel compatible with automatic placement equipment Each chip individually addressable to provide color on-demand Product Photo Here ESD protected [ 1 kV, 1 time (200 pF 0 : @ The OVSTRGBFC6 is a full-color chip LED with multiple viewing angles and the ability to produce all colors of the visible spectrum, plus white. This small package, combined with high-light output, is ideal for miniature applications. Applications x Automotive (backlighting in dashboard and switches) x Telecommunications (indicator and backlighting in telephone and fax) x Flat backlight (LCDs, membrane switches and symbols) x Personal/portable appliances (mobile phones, pagers, audio/video players and GPS) Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVSTRGBFC6 AlInGaP/InGaN Red/Green/Blue 53/165/46 Water Clear SOLDER PATTERN RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05 Page 1 of 9 Full-Color SMT Chip LED OVSTRGBFC6 Absolute Maximum Ratings TA = 25oC unless otherwise noted SYMBOL PD IF PD IF IFP VALUE PARAMETER Power Dissipation (1 chip on) DC Forward Current (1 chip on) Power Dissipation (2 or 3 chips on) DC Forward Current (2 or 3 chips on) Pulsed Forward Current1 UNIT RED GREEN BLUE 68 98 98 mW 25 25 25 mA 22 33 33 mW 10 10 10 mA 100 100 100 mA 2 IF DC forward Current Reduction (TA & (1 chip on) DC forward Current Reduction2 (TA & (3 chips on) -0.425 mA/ C -0.1 TOPR Operating Temperature -30 ~ +80 C TSTG Storage Temperature -40 ~ +100 C Notes: 1. Duty 2. TOPR = 40 ~ 80 C. Use under this condition. Electrical Characteristics TA = 25oC unless otherwise noted RED SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS VF Forward Voltage ---- 1.9 2.4 V IF = 20 mA IR Reverse Current Luminous Intensity (Axial Direction) Dominant Wavelength ---- ---- 100 A VR = 5 V 22 ---- 127 mcd IF = 20 mA 621 ---- 631 nm IF = 20 mA Spectral Line Half Width ---- 15 ---- nm IF = 20 mA IV d OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 10/05 Page 2 of 9 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full-Color SMT Chip LED OVSTRGBFC6 Electrical Characteristics TA = 25oC unless otherwise noted GREEN SYMBOL VF1 VF2 IV d PARAMETER Forward Voltage MIN TYP MAX UNITS CONDITIONS ---- 3.3 3.9 V IF = 20 mA 2.0 ---- ---- V IF = 5 A Luminous Intensity (Axial Direction) Dominant Wavelength 82 ---- 372 mcd IF = 20 mA 520 ---- 540 nm IF = 20 mA Spectral Line Half Width ---- 35 ---- nm IF = 20 mA MIN TYP MAX UNITS CONDITIONS ---- 3.4 3.9 V IF = 20 mA 2.0 ---- ---- V IF = 5 A Electrical Characteristics TA = 25oC unless otherwise noted BLUE SYMBOL VF1 VF2 PARAMETER Forward Voltage IV Luminous Intensity (Axial Direction) 25 ---- 101 mcd IF = 20 mA d Dominant Wavelength 460 ---- 480 nm IF = 20 mA Spectral Line Half Width ---- 25 ---- nm IF = 20 mA Ranking IF = 20 mA LUMINOUS INTENSITY (mcd) RANK RED J K L M N P Q R GREEN 82 ~ 165 22 ~ 53 165 ~ 372 82 ~ 165 53 ~ 127 165 ~ 372 BLUE 25 ~ 46 46 ~ 101 25 ~ 46 46 ~ 101 25 ~ 46 46 ~ 101 25 ~ 46 46 ~ 101 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05 Page 3 of 9 Full-Color SMT Chip LED OVSTRGBFC6 Reliability Tests TEST ITEM STANDARD TEST METHOD1 Operating Test ED-4701 D-511 High Temp Storage Test Low Temp Storage Test High Humidity Storage Test High Temp Operating Test High Temp and High Humidity Operating Test Temperature Cycle Test Thermal Shock Test Fall Test FAILURE RATE2, 3 TEST CONDITIONS TA = 25 C, IF = 25 mA, DC2 t = 1000 hours TA = 25 C, IF = 10 mA, DC2 t = 1000 hours 1 chip on4 3 chips on4 ED-4701-3 B-111A ED-4701-3 B-112A ED-4701-3 B-121A 0/20 0/20 TA = 100 C, t = 1000 hours 0/20 TA = 30 C, t = 1000 hours 0/20 TA = 85 C, RH W KRXUV 0/20 TA = 80 C, IF = 8 mA, DC2 t = 1000 hours TA = 60 C, RH 1 chip on4 t = 1000 hours, IF = 16 mA, DC TA = (-30 C, 30 minutes ~ 100 C, 30 minutes) x 100 cycles 1 chip on4 ---ED-4701-3 B-122A 0/20 0/20 ED-4701-3 B-131A ED-4701-3 TA = (-40 C, 5 minutes ~ 80 C, 5 minutes) x 50 cycles B-141A ---- 0/20 0/20 h = 1 m, maple tree board, 10 times 0/20 Failure Criteria SYMBOL VF VR ITEM Forward Voltage MIN MAX CONDITIONS 5 ---- U.S.L. x 1.1 IF = 20 mA 2.0 ---- IF = 5 A IR Reverse Current (red only) ---- 100A VR = 5 V IV Luminous Intensity L.S.L. x 0.56 ---- IF = 20 mA Notes: 1. Number: EIAJ ("Electronic Industries Association of Japan") standard methods are used. 2. Failure rate is obtained when there is no damage by static electricity. 3. Failure rate evaluated based on "Criteria for Judging the Damage" table. 4. One (1) chip on = electric current only to one color in one LED. Three (3) chips on = electric current to the red, the green and the blue simultaneously. 5. U.S.L.: Upper Standard Level (see maximum values on red, green and blue Electrical tables on pages 2 and 3). 6. L.S.L.: Lower Standard Level (see minimum values on red, green and blue Electrical tables on pages 2 and 3). OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 10/05 Page 4 of 9 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full-Color SMT Chip LED OVSTRGBFC6 Radiation Patterns TA=25 C X TA=25 C Y Relative Luminous Intensity Relative Luminous Intensity Cathode Mark Y X OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05 Page 5 of 9 Full-Color SMT Chip LED OVSTRGBFC6 Typical Electro-Optical Characteristics Curves TA = 25 C TA = 25 C mA % mA V Forward Current vs Relative Luminous Intensity Forward Voltage vs Forward Current IF=20 mA TA=25 C % % C nm Ambient Temperature vs Relative Luminous Intensity Wavelength vs Relative Intensity ALLOWED AREA TO OPERATE: I P-TA mA 1 chip 3 chips C Forward Current vs Ambient Temperature OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 10/05 Page 6 of 9 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full-Color SMT Chip LED OVSTRGBFC6 Typical Electro-Optical Characteristics Curves TA = 25 C nm TA = 25 C Y mA X Red: Forward Current vs Dominant Wavelength Red: Forward Current vs Chromaticity Diagram TA = 25 C nm TA = 25 C Y X mA Green: Forward Current vs Dominant Wavelength Green: Forward Current vs Chromaticity Diagram TA = 25 C TA = 25 C Y nm X mA Blue: Forward Current vs Dominant Wavelength Blue: Forward Current vs Chromaticity Diagram OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05 Page 7 of 9 Full-Color SMT Chip LED OVSTRGBFC6 Carrier Tape Dimensions: Loaded quantity 1000 pieces per reel Vacant SMD Parts Vacant Cover Tape START END Vacant (min. 15 pcs) Vacant (min. 10 pcs) Min. 200 UNIT: MM Center Hole Cathode Mark Progressive Direction Notes: 1. General tolerance is 0.1. 2. Cover tape peeling-off strength is 0.29 - 0.58 N (10 tear-away angle of the cover tape and the carrier tape). OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 10/05 Page 8 of 9 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Full-Color SMT Chip LED OVSTRGBFC6 Packing Information: 1000 pieces on 7-inch reel sealed in ESD protected bag TAPING REEL DIMENSION UNIT: MM Label (product name, product number, lot number Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05 Page 9 of 9