OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05
Page 1 of 9
Full Color SMT Chip LED
(3.5 x 3.0 x 1.4 mm)
Product Photo Here
Part Number Material Emitted Color Intensity Typ. mcd
OVSTRGBFC6 AlInGaP/InGaN Red/Green/Blue 53/165/46
Lens Color
Water Clear
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OVSTRGBFC6
x Red/green/blue + white in single surface mount package
x 8 mm tape on 7” reel compatible with automatic placement
equipment
x Each chip individually addressable to provide color on-demand
x ESD protected [± 1 kV, 1 time (200 pF 0 :@
The OVSTRGBFC6 is a full-color chip LED with multiple viewing angles and the ability to produce all colors of the
visible spectrum, plus white. This small package, combined with high-light output, is ideal for miniature
applications.
Applications
x Automotive (backlighting in dashboard and switches)
x Telecommunications (indicator and backlighting in telephone and fax)
x Flat backlight (LCDs, membrane switches and symbols)
x Personal/portable appliances (mobile phones, pagers, audio/video players and GPS)
Moisture
RoHS
SOLDER PATTERN
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 10/05
Page 2 of 9
Full-Color SMT Chip LED
OVSTRGBFC6
Notes:
1. Duty
   
2. TOPR = 40 ~ 80° C. Use under this condition.
Electrical Characteristics
TA = 25oC unless otherwise noted
SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS
VF Forward Voltage ---- 1.9 2.4 V IF = 20 mA
IR Reverse Current ---- ---- 100 µA VR = 5 V
IV Luminous Intensity
(Axial Direction) 22 ---- 127 mcd IF = 20 mA
d Dominant Wavelength 621 ---- 631 nm IF = 20 mA
¨ Spectral Line Half Width ---- 15 ---- nm IF = 20 mA
RED
Absolute Maximum Ratings
TA = 25oC unless otherwise noted
SYMBOL PARAMETER VALUE UNIT
RED GREEN BLUE
PD Power Dissipation
(1 chip on) 68 98 98 mW
IF DC Forward Current
(1 chip on) 25 25 25 mA
PD Power Dissipation
(2 or 3 chips on) 22 33 33 mW
IF DC Forward Current
(2 or 3 chips on) 10 10 10 mA
IFP Pulsed Forward Current1 100 100 100 mA
¨IF
DC forward Current Reduction2
(TA &
(1 chip on) -0.425
DC forward Current Reduction2
(TA &
(3 chips on) -0.1
TOPR Operating Temperature -30 ~ +80 °C
TSTG Storage Temperature -40 ~ +100 °C
mA/° C
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05
Page 3 of 9
Full-Color SMT Chip LED
OVSTRGBFC6
Electrical Characteristics
TA = 25oC unless otherwise noted
GREEN
SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS
VF1 ---- 3.3 3.9 V IF = 20 mA
VF2 2.0 ---- ---- V IF = 5 µA
IV Luminous Intensity
(Axial Direction) 82 ---- 372 mcd IF = 20 mA
d Dominant Wavelength 520 ---- 540 nm IF = 20 mA
¨ Spectral Line Half Width ---- 35 ---- nm IF = 20 mA
Forward Voltage
Electrical Characteristics
TA = 25oC unless otherwise noted
BLUE
SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS
VF1 ---- 3.4 3.9 V IF = 20 mA
VF2 2.0 ---- ---- V IF = 5 µA
IV Luminous Intensity
(Axial Direction) 25 ---- 101 mcd IF = 20 mA
d Dominant Wavelength 460 ---- 480 nm IF = 20 mA
¨ Spectral Line Half Width ---- 25 ---- nm IF = 20 mA
Forward Voltage
Ranking
IF = 20 mA
LUMINOUS INTENSITY (mcd)
RANK RED GREEN BLUE
J
22 ~ 53
82 ~ 165 25 ~ 46
K 46 ~ 101
L 165 ~ 372 25 ~ 46
M 46 ~ 101
N
53 ~ 127
82 ~ 165 25 ~ 46
P 46 ~ 101
Q 25 ~ 46
R 46 ~ 101
165 ~ 372
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 10/05
Page 4 of 9
Full-Color SMT Chip LED
OVSTRGBFC6
Reliability Tests
TEST ITEM STANDARD
TEST
METHOD1 TEST CONDITIONS FAILURE RATE2, 3
Operating Test ED-4701
D-511
1 chip on4 TA = 25° C, IF = 25 mA,
DC2 t = 1000 hours 0/20
3 chips on4 TA = 25° C, IF = 10 mA,
DC2 t = 1000 hours 0/20
High Temp Storage
Test ED-4701-3
B-111A TA = 100° C, t = 1000 hours 0/20
Low Temp Storage
Test ED-4701-3
B-112A TA = 30° C, t = 1000 hours 0/20
High Humidity
Storage Test ED-4701-3
B-121A TA = 85° C, RH W KRXUV 0/20
High Temp Operating
Test ---- 1 chip on4 TA = 80° C, IF = 8 mA,
DC2 t = 1000 hours 0/20
High Temp and
High Humidity
Operating Test
ED-4701-3
B-122A 1 chip on4 TA = 60° C, RH 
t = 1000 hours,
IF = 16 mA, DC 0/20
Temperature Cycle
Test ED-4701-3
B-131A TA = (-30° C, 30 minutes ~ 100° C, 30 minutes)
x 100 cycles 0/20
Thermal Shock Test ED-4701-3
B-141A TA = (-40° C, 5 minutes ~ 80° C, 5 minutes) x 50 cycles 0/20
Fall Test ---- 0/20 h = 1 m, maple tree board, 10 times
Failure Criteria
SYMBOL ITEM MIN MAX CONDITIONS
VF Forward Voltage ---- U.S.L. x 1.15 IF = 20 mA
VR 2.0 ---- IF = 5 µA
IR Reverse Current
(red only) ---- 100µA VR = 5 V
IV Luminous Intensity L.S.L. x 0.56 ---- IF = 20 mA
Notes:
1. Number: EIAJ (“Electronic Industries Association of Japan”) standard methods are used.
2. Failure rate is obtained when there is no damage by static electricity.
3. Failure rate evaluated based on “Criteria for Judging the Damage” table.
4. One (1) chip on = electric current only to one color in one LED. Three (3) chips on = electric current to the red, the green and the blue
simultaneously.
5. U.S.L.: Upper Standard Level (see maximum values on red, green and blue Electrical tables on pages 2 and 3).
6. L.S.L.: Lower Standard Level (see minimum values on red, green and blue Electrical tables on pages 2 and 3).
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05
Page 5 of 9
Radiation Patterns
Full-Color SMT Chip LED
OVSTRGBFC6
Relative Luminous Intensity
X TA=25° C
Relative Luminous Intensity
Y TA=25° C
Cathode Mark
X
Y
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 10/05
Page 6 of 9
Typical Electro-Optical Characteristics Curves
Full-Color SMT Chip LED
OVSTRGBFC6
Wavelength vs Relative Intensity
nm
IF=20 mA
TA=25° C
%
mA
Forward Current vs Relative Luminous
Intensity
%
TA = 25° C
° C
Ambient Temperature vs Relative Luminous
Intensity
%
V
Forward Voltage vs Forward Current
mA
TA = 25° C
° C
Forward Current vs Ambient
Temperature
ALLOWED AREA TO OPERATE: I P-TA
1 chip
3 chips
mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05
Page 7 of 9
Typical Electro-Optical Characteristics Curves
Full-Color SMT Chip LED
OVSTRGBFC6
Blue: Forward Current vs Dominant
Wavelength
mA
nm
TA = 25° C
mA
Green: Forward Current vs Dominant
Wavelength
nm
TA = 25° C
Blue: Forward Current vs Chromaticity
Diagram
Y
X
TA = 25° C
TA = 25° C
Green: Forward Current vs Chromaticity
Diagram
X
Y
TA = 25° C
Red: Forward Current vs Chromaticity
Diagram
X
Y
mA
Red: Forward Current vs Dominant
Wavelength
nm
TA = 25° C
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 10/05
Page 8 of 9
Full-Color SMT Chip LED
OVSTRGBFC6
Carrier Tape Dimensions: Loaded quantity 1000 pieces per reel
Vacant Vacant SMD Parts Cover Tape
Vacant (min. 15 pcs) Vacant (min. 10 pcs) Min. 200
END START
UNIT: MM
Cathode Mark
Center Hole
Progressive Direction
Notes:
1. General tolerance is ±0.1.
2. Cover tape peeling-off strength is 0.29 - 0.58 N (10° tear-away angle of the cover tape and the carrier tape).
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 10/05
Page 9 of 9
Full-Color SMT Chip LED
OVSTRGBFC6
Packing Information: 1000 pieces on 7-inch reel sealed in ESD protected bag
Moisture Resistant Packaging
Label (product name, product number, lot number
TAPING REEL DIMENSION UNIT: MM
Label Aluminum Moisture-proof Bag Desiccant Bar Code Label