RGL41J-E3/96 - Vishay Presicion Group

Document Number: 88547 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 15-Mar-11 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Surface Mount Glass Passivated Junction Fast Switching Rectifier

BYM11-50 thru BYM11-1000, RGL41A thru RGL41M

Vishay General Semiconductor

TYPICAL APPLICATIONS

For use in fast switching rectification of power supply,

inverters, converters, and freewheeling diodes for

consumer, automotive and telecommunication.

FEATURES

• Superectifier structure for high reliability condition

• Ideal for automated placement

• Fast switching for high efficiency

• Low leakage current

• High forward surge capability

• Meets environmental standard MIL-S-19500

• Meets MSL level 1, per J-STD-020, LF maximum peak of

250 °C

• AEC-Q101 qualified

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

MECHANICAL DATA

Case: DO-213AB, molded epoxy over glass body

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS compliant, commercial grade

Base P/NHE3 - RoHS compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: Two bands indicate cathode end - 1st band

denotes device type and 2nd band denotes repetitive peak

reverse voltage rating

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 50 V to 1000 V

IFSM 30 A

trr 150 ns, 250 ns, 500 ns

VF1.3 V

TJ max. 175 °C

DO-213AB

SUPERECTIFIER

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER

SYMBOL

BYM

11-50

BYM

11-100

BYM

11-200

BYM

11-400

BYM

11-600

BYM

11-800

BYM

11-1000

UNIT

FAST SWITCHING TIME DEVICE:

1ST BAND IS RED RGL41A RGL41B RGL41D RGL41G RGL41J RGL41K RGL41M

Polarity color bands (2nd band) Gray Red Orange Yellow Green Blue Violet

Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward rectified

current at TT = 55 °C IF(AV) 1.0 A

Peak forward surge current 8.3 ms single

half sine-wave superimposed on rated

load

IFSM 30 A

Maximum full load reverse current, full

cycle average at TA = 55 °C IR(AV) 50 μA

Operating junction and storage

temperature range TJ, TSTG - 65 to + 175 °C

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88547

2DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

BYM11-50 thru BYM11-1000, RGL41A thru RGL41M

Vishay General Semiconductor

Notes

(1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal

(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal

Note

(1) AEC-Q101 qualified

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL BYM

11-50

BYM

11-100

BYM

11-200

BYM

11-400

BYM

11-600

BYM

11-800

BYM

11-1000 UNIT

Maximum

instantaneous

forward voltage

1.0 A VF1.3 V

Maximum DC reverse

current at rated DC

blocking voltage

TA = 25 °C

5.0

μA

TA = 125 °C 50

Maximum reverse

recovery time

IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 150 250 500 ns

Typical junction

capacitance 4.0 V, 1 MHz CJ15 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL BYM

11-50

BYM

11-100

BYM

11-200

BYM

11-400

BYM

11-600

BYM

11-800

BYM

11-1000 UNIT

Maximum thermal resistance RJA (1) 75

°C/W

RJT (2) 30

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

RGL41J-E3/96 0.114 96 1500 7" diameter plastic tape and reel

RGL41J-E3/97 0.114 97 5000 13" diameter plastic tape and reel

BYM11-600-E3/96 0.114 96 1500 7" diameter plastic tape and reel

BYM11-600-E3/97 0.114 97 5000 13" diameter plastic tape and reel

RGL41JHE3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel

RGL41JHE3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel

BYM11-600HE3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel

BYM11-600HE3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel

Document Number: 88547 For technical questions within your region, please contact one of the following: www.vishay.com

Revision: 15-Mar-11 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

BYM11-50 thru BYM11-1000, RGL41A thru RGL41M

Vishay General Semiconductor

RATINGS AND CHARACTERISTICS CURVES

(TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Transient Thermal Impedance

Average Forward Rectified Current (A)

25 50 75 100 125 150 175

0.25

0.50

0.75

1.00

1.25

Terminal Temperature (°C)

Resistive or

Inductive Load

110 100

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

= T

Max.

8.3 ms Single Half Sine-Wave

0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.01

0.1

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

= 25 °C

Pulse Width = 300 µs

1 % Duty Cycle

020 40 60 80 100

0.01

0.1

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (µA)

= 100 °C

= 25 °C

110 100

100

Reverse Voltage (V)

Junction Capacitance (pF)

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

0.01 0.1 110 100

0.1

100

Mounted on 0.20" x 0.27" (5 mm x 7 mm)

Copper Pad Areas

Transient Thermal Impedance (°C/W)

t - Pulse Duration (s)

www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 88547

4DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

BYM11-50 thru BYM11-1000, RGL41A thru RGL41M

Vishay General Semiconductor

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-213AB

band denotes type and positive end (cathode)

Band

Solderable Ends

D2 = D1 + 0

- 0.008 (0.20)

D2 0.105 (2.67)

0.095 (2.41)

D1 =

0.022 (0.56)

0.018 (0.46)

0.022 (0.56)

0.018 (0.46)

0.205 (5.2)

0.185 (4.7)

Mounting Pad Layout

0.138 (3.5) MAX.

0.049 (1.25) MIN.

0.238 (6.0) REF.

0.118 (3.0) MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.