Document 806-1 RE U T A R E P M E T HIGH Shielded Power Inductors - XAL40xx * High current and very low DCR * AEC-Q200 Grade 1 qualified (-40C to +125C ambient) * Soft saturation makes them ideal for VRM/VRD applications. Designer's Kit C429 contains 5 of each value Core material Composite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other terminations available at additional cost. Ambient temperature -40C to +125C with Irms current, +125C to +165C with derated current. Storage temperature Component: -40C to +165C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Part number1 XAL4020-221ME_ XAL4020-401ME_ XAL4020-601ME_ XAL4020-102ME_ XAL4020-152ME_ XAL4020-222ME_ XAL4030-332ME_ XAL4030-472ME_ XAL4030-682ME_ XAL4040-822ME_ XAL4040-103ME_ XAL4040-153ME_ Inductance2 20% (H) 0.22 0.40 0.60 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10 15 DCR (mOhms)3 typmax 5.81 6.40 7.55 8.30 9.50 10.45 13.25 14.60 21.45 23.60 35.20 38.70 26.0 28.6 40.1 44.1 67.4 74.1 60.8 66.9 84.0 92.4 109 120 SRF typ4 (MHz) 191 145 106 79 64 52 43 36 29 27 24 20 Isat5 (A) 18.7 12.5 10.4 8.7 7.1 5.6 5.5 4.5 3.6 4.0 3.0 2.8 Irms (A)6 20C rise 40C rise 12.0 16.8 10.0 14.0 7.9 11.7 6.7 9.6 5.2 7.5 4.0 5.5 5.0 6.6 3.9 5.1 3.0 3.9 2.4 3.4 2.2 3.1 2.0 2.8 Irms Testing Irms testing was performed on 0.75 inch wide x 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. 1. When ordering, please specify termination and packaging codes: XAL4020-222MEC Termination: E = RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at which the inductance drops 30% (typ) from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specificationssales@coilcraft.com subject to change without notice. US +1-847-639-6400 Please check our website for latest information. UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 806-1 Revised 07/18/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. URE T A R E P M E T HIGH Shielded Power Inductors - XAL40xx Document 806-2 L vs Current US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 806-2 Revised 07/18/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 806-3 URE T A R E P M E T HIGH Shielded Power Inductors - XAL40xx Typical L vs Frequency 2.2 H 1.5 H 1.0 H 1 0.60 H 0.40 H 0.1 0.22 H 0.1 10 1 100 45 40 35 30 25 2.2 H 1.5 H 1.0 H 0.60 H 0.40 H 0.22 H 6.8 H 4.7 H 10 50 15 H 10 H 6.8 H 4.7 H Inductance (H) 15 H 10 H Equivalent Series Resistance (Ohms) Typical ESR vs Frequency 100 20 15 10 5 0 0.1 10 1 Frequency (MHz) 100 Frequency (MHz) Irms Derating 0.157 0.012 4,0 0,3 120 XXX 110 90 80 70 Dash number 60 0.157 0.012 4,0 0,3 Note: Parts manufactured prior to 2011 may not have orientation mark Orientation mark 50 Height (See table) 40 25C Percent of rated Irms 100 30 0.032 0.002 0,82 0,05 20 10 0 -40 -20 0 20 Recommended Land Pattern 40 60 80 100 120 140 160 180 0.093 2,37 0.132 0.008 3,36 0,20 Ambient temperature (C) 0.146 3,7 0.038 0,98 0.062 0.010 1,57 0,25 XAL4020 XAL4030 XAL4040 Maximum height 0.083 / 2,1 0.122 / 3,1 0.161 / 4,1 Weight 0.17 - 0.18 g 0.26 - 0.28 g 0.35 - 0.37 g Dimensions are in inches mm Packaging XAL4020: 1000/7 reel; 3500/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 2.1 mm pocket depth XAL4030: 500/7 reel; 2000/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth XAL4040: 500/7 reel; 2000/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 4.27 mm pocket depth US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 806-3 Revised 07/18/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.