Specifications subject to change without notice.
Please check our website for latest information.
US
UK
Taiwan
China
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest information.
HIGH TEMPERA
Shielded Power Inductors
–
XAL40xx
Document 806-1
Document 806-1 Revised 07/18/12
Inductance2 DCR (mOhms)3 SRF typ4 Isat5 Irms (A)6
Part number1 ±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise
XAL4020-221ME_ 0.22 5.81 6.40 191 18.7 12.0 16.8
XAL4020-401ME_ 0.40 7.55 8.30 145 12.5 10.0 14.0
XAL4020-601ME_ 0.60 9.50 10.45 106 10.4 7.9 11.7
XAL4020-102ME_ 1.0 13.25 14.60 79 8.7 6.7 9.6
XAL4020-152ME_ 1.5 21.45 23.60 64 7.1 5.2 7.5
XAL4020-222ME_ 2.2 35.20 38.70 52 5.6 4.0 5.5
XAL4030-332ME_ 3.3 26.0 28.6 43 5.5 5.0 6.6
XAL4030-472ME_ 4.7 40.1 44.1 36 4.5 3.9 5.1
XAL4030-682ME_ 6.8 67.4 74.1 29 3.6 3.0 3.9
XAL4040-822ME_ 8.2 60.8 66.9 27 4.0 2.4 3.4
XAL4040-103ME_ 10 84.0 92.4 24 3.0 2.2 3.1
XAL4040-153ME_ 15 109 120 20 2.8 2.0 2.8
1. When ordering, please specify termination and packaging codes:
XAL4020-222MEC
Termination: E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops 30% (typ) from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C429 contains 5 of each value
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +125°C with Irms current, +125°C to
+165°C with derated current.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
• High current and very low DCR
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
• Soft saturation makes them ideal for VRM/VRD applications.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.