CLD-AP42 Rev 6 binning & labeling Cree XLamp ML Family LEDs (R) (R) Introduction Table of Contents This document describes the product nomenclature Bin and Order-Code Format................................ 2 required to select and order Cree's XLamp ML family Performance Groups - Luminous or Radiant Flux... 2 of LEDs. XLamp ML family LEDs are tested and sorted Performance Groups - Dominant Wavelength........ 3 into bins which are then combined into orderable kits Performance Groups - Chromaticity..................... 4 identified by an order code. Cree's Standard Chromaticity Regions Plotted on the 1931 CIE Curve................................................. 7 All XLamp LEDs are tested and sorted by color and Cree's Standard Cool White Kits Plotted on ANSI brightness into a unique bin. Each bin contains Standard Chromaticity Regions............................ 8 LEDs from only one color and brightness group and Cree's Standard Warm and Neutral White Kits Plotted is uniquely identified by a bin code. White XLamp on ANSI Standard Chromaticity Regions..............10 LEDs are sorted by chromaticity (color) and luminous Cree's Standard Chromaticity Kits.......................12 flux (brightness). Color XLamp LEDs are sorted by Standard Order Codes and Bins dominant wavelength (color) and luminous flux ML-B Cool White...........................................13 (brightness). LEDs are shipped on reels containing ML-B Warm White.........................................13 LEDs from one bin and are always labeled with the ML-C Parallel, Cool White...............................15 appropriate bin code. ML-C Parallel, Warm White.............................17 ML-E Parallel, Cool White...............................19 Kits contain LEDs from a number of similar bins and ML-E Parallel, Warm White.............................20 are fully defined by their order codes. A full explanation ML-C Series, Cool White ................................22 of the order codes for XLamp ML family LEDs, as well ML-C Series, Warm White..............................24 as a list of standard order codes, is provided in this ML-E Series, Cool White.................................26 document. ML-E Series, Warm White...............................27 www. cree.com/Xlamp ML-C Color...................................................29 ML-E Color...................................................29 Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 xlamp ml Family leds binning & labeling Bin and Order-Code Format Bin codes and order codes are configured in the following manner: Order Code Bin Code Series MLE = ML-E MLC = ML-C MLB = ML-B Series MLE = ML-E MLC = ML-C MLB = ML-B CRI Configuration A1 = Typical CRI H1 = 80 CRI Minimum P1 = 85 CRI Minimum U1 = 90 CRI Minimum CRI Configuration A1 = Typical CRI H1 = 80 CRI Minimum P1 = 85 CRI Minimum U1 = 90 CRI Minimum Luminous Flux Luminous flux group SSSCCC-BB-WWW-FF-A-AAAAA SSSCCC-BB-HHHH-NNNFGG Chromaticity Internal code Internal code Chromaticity code Color/Configuration AWT = White - Parallel SWT = White - Series ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RED = Red Color/Configuration AWT = White - Parallel SWT = White - Series ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RED = Red Performance Groups - Luminous Or Radiant Flux White XLamp ML family LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code F0* Min. Luminous Flux Max. Luminous Flux 10.7 13.9 18.1 13.9 G0 23.5 18.1 20.6 23.5 18.1 20.6 H2 H3 J0* 15.8 18.1 13.9 15.8 G2 G3 H0* 12.3 13.9 10.7 12.3 F2 F3 30.6 23.5 26.8 30.6 23.5 26.8 J2 J3 K2 30.6 35.2 K3 35.2 39.8 M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62 Notes: * Flux codes F0, G0, H0 and J0 are further subdivided into F2, F3, G2, G3 and H2, H3, respectively. Orders for the F0 flux code may be filled with either F2 or F3 sub-codes, orders for the G0 flux code may be filled with either G2 or G3 sub-codes, orders for the H0 flux code may be filled with H2 or H3 sub-codes, and orders for the J0 flux code may be filled with J2 or J3 sub-codes. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 2 xlamp ml Family leds binning & labeling Royal-blue XLamp LEDs are tested for radiant flux and sorted into one of the following radiant-flux bins. Group Min. Radiant Flux (mW) Max. Radiant Flux (mW) 03 50 60 04 60 70 05 70 85 06 85 100 07 100 122 08 122 147 09 147 175 10 175 210 11 210 250 12 250 300 13 300 350 14 350 425 Performance Groups - Dominant Wavelength The XLamp ML-E color LEDs are tested individually for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color Royal Blue Blue Green Amber Red DWL Group Min. DWL (nm) Max. DWL (nm) D36 450 452.5 D37 452.5 455 D46 455 457.5 D47 457.5 460 D56 460 462.5 D57 462.5 465 B3 465 470 B4 470 475 B5 475 480 B6 480 485 G2 520 525 G3 525 530 G4 530 535 A2 585 590 A3 590 595 R2 620 625 R3 625 630 Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 3 xlamp ml Family leds binning & labeling Performance Groups - Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 Region x y 0.2920 0.3060 0.2920 0.3060 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.3009 0.2980 0.3042 0.2984 0.2880 0.2895 0.2950 0.2970 0.2870 0.3210 0.3009 0.3042 0.3037 0.2937 0.2937 0.3312 0.2962 0.3220 0.3048 0.3130 0.3207 0.3028 0.3290 0.3115 0.3144 0.3186 0.3130 0.3290 0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 0.3005 0.3415 0.3099 0.3509 0.3144 0.3186 0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261 0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120 0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0B 0S 1B 1S 2B Region x y 0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3133 0.3048 0.3207 0.3009 0.3042 0.3135 0.2962 0.3220 0.3037 0.2937 0.2937 0.3312 0.3009 0.3042 0.3005 0.3415 0.3068 0.3113 0.3028 0.3304 0.3093 0.2993 0.3304 0.3115 0.3391 0.3130 0.3290 0.3391 0.3205 0.3481 0.3213 0.3373 0.3213 0.3373 0.3221 0.3261 0C 0T 1C 1T 2C Region 0D 0U 1D 1U 2D x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369 0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245 0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620 0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487 0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427 2S 3B 2T 3C 2U 3D 0.3366 0.3369 0.3381 0.3762 0.3480 0.3840 0.3440 0.3428 0.3440 0.3428 0.3480 0.3840 0.3571 0.3907 0.3515 0.3487 0.3429 0.3307 0.3463 0.3687 0.3551 0.3760 0.3495 0.3339 0.3361 0.3245 0.3376 0.3616 0.3463 0.3687 0.3429 0.3307 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659 0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722 0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578 0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521 0.3512 0.3465 0.3571 0.3907 0.3668 0.3957 0.3590 0.3521 0.3590 0.3521 0.3668 0.3957 0.3771 0.4034 0.3670 0.3578 0.3567 0.3389 0.3641 0.3804 0.3736 0.3874 0.3640 0.3440 0.3495 0.3339 0.3548 0.3736 0.3641 0.3804 0.3567 0.3389 3S 4B 4S 3T 4C 4T 3U 4D 4U Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 4 xlamp ml Family leds binning & labeling Performance Groups - Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 Region 5A2 x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 Region 5A3 x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 Region 5A4 x y 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646 0.3702 0.3722 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 0.3782 0.3837 0.3763 0.3760 5B2 0.3802 0.3916 0.3782 0.3837 5B3 0.3869 0.3958 0.3847 0.3877 5B4 0.3847 0.3877 0.3825 0.3798 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 5C2 5C3 5C4 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 5D2 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 5D3 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 5D4 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 6A2 6A3 6A4 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 6B2 6B3 6B4 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 6C2 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 6C3 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 6C4 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4242 0.3919 6D2 7A2 0.4221 0.3984 0.4281 0.4006 6D3 7A3 0.4281 0.4006 0.4342 0.4028 6D4 7A4 0.4242 0.3919 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4281 0.4006 7B2 0.4364 0.4188 0.4322 0.4096 7B3 0.4430 0.4212 0.4385 0.4119 7B4 0.4385 0.4119 0.4342 0.4028 Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 5 xlamp ml Family leds binning & labeling Performance Groups - Chromaticity (continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 AB2 AB1 AA2 AA1 x y 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4403 0.4049 Region 7C2 x y 0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141 Region 7C3 x y 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164 Region 7C4 x y 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071 0.4259 0.3853 0.4300 0.3939 0.4359 0.3960 0.4316 0.3873 0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960 0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 7D2 7D3 7D4 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.4373 0.3893 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 0.4418 0.3981 0.4475 0.3994 0.4428 0.3906 8A2 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994 8A3 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008 8A4 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4465 0.4071 0.4513 0.4164 0.4573 0.4178 0.4523 0.4085 0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4695 0.4207 8B2 8C2 0.4687 0.4289 0.4750 0.4304 8B3 8C3 0.4750 0.4304 0.4813 0.4319 8B4 8C4 0.4695 0.4207 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4589 0.4021 0.4582 0.4099 0.4641 0.4112 0.4641 0.4112 0.4700 0.4126 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.5008 0.4256 0.5070 0.4350 0.5069 0.4254 0.5131 0.4252 0.5192 0.4250 0.5133 0.4348 0.5196 0.4346 0.5258 0.4343 0.5133 0.4348 0.5196 0.4346 0.5258 0.4343 0.5069 0.5321 0.4341 0.4254 0.5131 0.4252 0.5192 0.4250 0.5253 0.4248 0.4946 0.4162 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5008 0.4256 0.5069 0.4254 8D2 AB3 AB4 0.5069 0.4254 0.5131 0.4252 8D3 AC2 AC1 0.5131 0.4252 0.5192 0.4250 8D4 AC3 AC4 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 0.5192 0.4250 0.5253 0.4248 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5186 0.4154 0.4884 0.4067 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.4946 0.4162 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5006 0.4160 0.4942 0.4066 AA3 0.5066 0.4158 0.5001 0.4064 AD2 0.5126 0.4156 0.5059 0.4062 AD3 0.5186 0.4154 0.5118 0.4061 0.4822 0.3973 0.4879 0.3972 0.4936 0.3970 0.4993 0.3969 0.4884 0.4067 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.5118 0.4061 0.4879 0.3972 0.4936 0.3970 0.4993 0.3969 0.5050 0.3967 AA4 AD1 AD4 Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 6 xlamp ml Family leds binning & labeling Cree's Standard Chromaticity Regions Plotted on the 1931 CIE Curve 0.42 0.41 4500K 0.40 5000K 0.39 4T 4S 0.38 4C 3S 0.37 6500K 0.34 0T 0.33 0S 0.32 0C 0B 0.31 0D 4R 3U 3R 2A 1D ANSI C78.377A 2U 2R 1A 0A 2D 1C 1B 4U 3A 2B 1S 4A 3D 2C 1T 8000K 4D 3B 2S 0.35 4B 3C 2T 0.36 CCy 3T 5700K 1U 1R 0U 0.30 0R 0.29 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx 0.46 0.45 2700K 3000K 0.44 0.43 3500K 0.42 4000K 0.41 6C3 4500K CCy 6C2 6B3 0.40 6B2 5C3 5B3 5B4 0.38 5B1 6A2 5D3 5A2 7A2 6D3 6D2 7A1 6A3 5D2 5A3 0.37 6B1 5C4 5C1 5B2 6C1 6B4 5C2 0.39 6C4 7A4 7A3 7D1 7D2 7D4 8B1 7C4 7C1 7B4 7B1 7C2 7B3 7B2 7D3 8A1 8A3 8A2 8A4 8B3 8B2 7C3 8D1 8B4 8D2 8C3 8C4 8D3 8D4 6D4 ANSI C78.377A 6D1 6A4 5D4 8C1 8C2 6A1 5D1 5A4 5A1 0.36 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 CCx Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 7 xlamp ml Family leds binning & labeling 0.45 0.44 2200K 2450K 2700K 3000K 0.43 0.42 8A4 CCy 8A1 AA2 AA1 8D1 AC2 AB1 AB4 AC1 AC4 AA3 AD2 AC3 AD3 8D3 8D2 8A3 8A2 7D3 0.40 AB3 8C4 8C1 8B4 8B1 7C4 0.41 8B3 8B2 7C3 7C2 AB2 8C3 8C2 AA4 AD1 AD4 8D4 0.39 0.38 0.37 0.55 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Cree's Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000K 0.39 0.38 0.38 5700K 3S 0.37 6500K 1T ANSI C78.377A 2R 1A 1U 0A 1D 2U ANSI C78.377A 2R 1A 1U 0D 1R 0U 0.30 0R CCx 0.36 0.35 0.34 0.33 0.36 0.35 0.34 0.33 0.32 0.28 0.31 0.28 0.32 0R 0.29 0.30 0C 3R 2A 1B 0B 0.31 1R 0.29 0.29 0S 0.32 0U 0.30 0T 0.33 2D 1C 0.31 0D 0A 2U 0.30 0.31 1D 3A 2B 1S 0.29 0C 0B 3R 2A 1B 8000K 0.28 0S 0.32 0.28 CCy 0T 0.33 3B 2C 1T 0.34 2D 1C 2T 2S 0.35 3A 2B 1S 0.36 CCy DT 8000K 6500K 2C 3S 51 0.37 3B 2S 0.34 5700K 2T 0.36 0.35 5000K 0.39 CCx Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 8 xlamp ml Family leds binning & labeling 0.40 0.40 5000K 0.39 0.38 5700K 0.38 2T 6500K 1S 2S 0.36 0.35 8000K 0T 0C 0A ANSI C78.377A 2R 1A 1U 0D 0S 0.32 0C 1R 0R 1R 0U CCx 0.36 0.35 0.30 0.28 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.36 0.28 0.29 ANSI C78.377A 2R 1U 0R 0.29 CCx 0.42 0.40 0.41 5000K E3 0.40 5700K 0T 0.33 0S 0.32 0C 0.31 1D 2U ANSI C78.377A 2R 1A 1U 0D 0A 3R 2A 1B 0B 2D 1C 6500K 0.35 1T 0T 0.33 1R 0S 0.32 0U 0.30 0C 0.30 2R 1U 0U 0R 0.29 0.28 0.29 0.28 CCx ANSI C78.377A 2U 1R 0.30 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 4U 4R 3U 3R 2A 1D 1A 0D 0A 0.29 2D 1C 1B 0B 0.31 0R 3A 2B 1S 4A 3D 2C 8000K 4D 3B 2S 0.34 3C 2T 0.36 3A 2B E0 0.34 2C 1T 1S 4C 4B CCx 0.42 0.41 4500K 0.40 5000K 0.39 0.38 3T 4C 3S 0.37 6500K 0.35 0T 0.33 0S 0.32 0B 0.31 0A 0.30 4U 4R 3U 3R 2A 1D 1A 0D 2D 1C 1B 0C 3A 2B 1S 4A 3D 2C 1T 8000K 4D 3B 2S 0.34 4B 3C 2T 0.36 CCy 4T 4S DZ 5700K ANSI C78.377A 2U 2R 1U 1R 0U 0R 0.29 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 9 0.38 8000K 3T 3S 0.31 0.35 3D DY 5700K 0.37 CCy E1 0.38 3C 3B 0.37 2T 2S 4T 4S 0.34 6500K 0.36 5000K 0.33 3S 0.32 E2 0.37 0.39 0.36 0.38 4500K 0.35 0.39 CCy 2U 1A 0.30 0.29 0.28 1D 0D 0A 3R 2A 1B 0B 0.31 0U 0.30 0T 0.33 0.34 0.31 2U 2D 0.33 0B 1D 3A 2B 1C 0.32 0S 0.32 3R 2A 1B 1T 1S 0.34 0.31 0.33 3B 2C 8000K 2D 1C 2T 2S 0.35 3A 2B 1S 0.34 0.36 3B 2C 1T 3S 50 0.37 CCy 6500K 5700K 3S DV 0.37 CCy 5000K 0.39 xlamp ml Family leds binning & labeling Cree's Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700K 3000K 0.44 0.43 0.42 4000K 0.41 E5 0.40 CCy E6 4500K 5000K 0.39 E4 0.38 0.37 5B1 6D2 8A4 4D 8C1 8C2 8C3 8C4 8D3 8D2 8D4 8D1 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 3B 8B3 8B4 8A3 8A2 8A1 7D4 7D1 7A4 7A1 6A3 6A2 5D2 5A2 3C 0.36 5C4 5D3 5A3 4B 6B1 7D2 7A3 7A2 6D3 7D3 8B2 8B1 7C4 7C1 7B4 7B1 6C1 6B4 5C1 5B4 4C 3B 6C2 6C4 6B2 5C3 5C2 5B3 5B2 6C3 7C3 7C2 7B3 7B2 6B3 E8 E7 3500K 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700K 3000K 0.44 0.43 3500K 0.42 F6 4500K 6C2 F5 5000K 0.39 F4 0.38 0.37 7A2 6D3 6D2 7A1 6A3 5D3 6A2 5D2 5A2 6C1 6B4 5C4 5B4 5A3 6C4 6B2 6B1 5C1 5B1 4C 4B 7A4 7A3 7D1 7C1 7D3 7D2 7D4 8A1 8B2 8B1 7C4 8A2 8A4 8A3 8D1 8B3 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 4D 3B 5B3 5B2 3C 0.36 5C3 5C2 7B4 7B1 7C3 7C2 7B3 7B2 6C3 6B3 0.40 CCy F7 4000K 0.41 F8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 10 xlamp ml Family leds binning & labeling 0.46 0.45 2700K 3000K 0.44 0.43 0.42 0.41 Z5 4500K 0.40 CCy Z6 4000K 6B2 5C3 5000K 0.39 5B3 5B1 4C 0.37 7A1 6A2 7A4 7D1 7D2 7D4 8A1 8A4 8D1 8C2 8C4 8C1 8B4 8C3 8D3 8D2 8D4 6D4 6D1 6A4 6A1 5D4 5D1 ANSI C78.377A 5A1 4D 3B 6D2 7A3 8A3 8A2 7D3 5A4 3C 0.36 5D3 5A3 7A2 6D3 6A3 5D2 5A2 4B 6B1 5C4 5C1 5B4 0.38 6C1 6B4 5C2 5B2 6C4 8B3 8B2 8B1 7C4 7C1 7B4 7B1 7C3 7C2 7B3 7B2 6C3 6C2 6B3 Z8 Z7 3500K 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.45 0.44 EA 2450K 2700K 3000K 0.43 0.42 7C2 CCy 0.40 8B1 7C4 0.41 7D3 8A1 8A3 8A2 8A4 8B3 8B2 7C3 8D1 8B4 8D2 8C1 8C2 2200K AB2 AB3 AC2 AB1 AB4 AC1 AC4 AA2 AA3 AD2 AA4 AD1 AC3 8C3 8C4 AD3 8D3 AA1 AD4 8D4 0.39 0.38 0.37 0.55 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 11 xlamp ml Family leds binning & labeling Cree's Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits for the ML family of LEDs. Color Cool White Warm White CCT Kit Chromaticity Bins 7000 K DT 0A, 0B, 0C,0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U 7000 K E0 0A, 0B, 0C, 0D 6500 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6500 K E1 1A, 1B, 1C, 1D 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6000 K DV 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 5700 K E2 2A, 2B, 2C, 2D 5500 K DY 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U 5000 K DZ 2C, 2D, 2T, 2U, 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S 5000 K A1 3A, 3B, 3C, 3D, 4A, 4B 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4750 K A2 3C, 3D, 4A. 4B, 4C, 4D 4500 K E4 4A, 4B, 4C, 4D 4300 K A3 4A, 4B, 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 4000 K Z5 5A3, 5B4, 5C1, 5D2 4000 K A4 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 3750 K A5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3500 K Z6 6A3, 6B4, 6C1, 6D2 3500 K A6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3250 K A7 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 3000 K Z7 7A3, 7B4, 7C1, 7D2 3000 K A8 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 2850 K A9 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2700 K Z8 8A3, 8B4, 8C1, 8D2 2700 K AA 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2200 K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4 The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp ML LEDs. Kit numbers completely describe an order code's chromaticity regions and luminous flux range. For other flux and chromaticity combinations, contact Cree or an authorized distributor. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 12 xlamp ml Family leds binning & labeling Standard Order Codes and Bins (ML-B Cool White, TJ = 25C) XLamp ML-B Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 80 mA* Code Flux (lm) Order Codes Typical CRI (75) 80 CRI Minimum ANSI Cool White (4500 K - 8300 K) DT E0 51 E1 MLBAWT-A1-0000-000WDT 7000 K MLBAWT-A1-0000-000WE0 MLBAWT-A1-0000-000W51 6500 K MLBAWT-A1-0000-000WE1 50 6200 K MLBAWT-A1-0000-000W50 DV 6000 K MLBAWT-A1-0000-000WDV E2 5750 K DY 5500 K J0 MLBAWT-A1-0000-000WE2 23.5 MLBAWT-A1-0000-000WDY DZ A1 MLBAWT-A1-0000-000WDZ 5000 K MLBAWT-A1-0000-000WA1 E3 F4 A2 E4 MLBAWT-A1-0000-000WE3 MLBAWT-A1-0000-000WF4 4750K MLBAWT-A1-0000-000WA2 4500K MLBAWT-A1-0000-000WE4 Standard Order Codes and Bins (ML-B Warm White, TJ = 25C) XLamp ML-B Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 80 mA* Code Flux (lm) Order Codes Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2600 K - 4300 K) A3 F5 4300 K 4250 K E5 Z5 A4 4000 K J0 23.5 H0 18.1 MLBAWT-A1-0000-000WA3 MLBAWT-A1-0000-000VA3 J0 23.5 MLBAWT-A1-0000-000WF5 H0 18.1 MLBAWT-A1-0000-000VF5 J0 23.5 MLBAWT-A1-0000-000WE5 H0 18.1 MLBAWT-A1-0000-000VE5 MLBAWT-H1-0000-000VE5 J0 23.5 MLBAWT-A1-0000-000WZ5 MLBAWT-H1-0000-000WZ5 H0 18.1 MLBAWT-A1-0000-000VZ5 MLBAWT-H1-0000-000VZ5 J0 23.5 MLBAWT-A1-0000-000WA4 H0 18.1 MLBAWT-A1-0000-000VA4 MLBAWT-H1-0000-000WE5 MLBAWT-P1-0000-000VE5 MLBAWT-U1-0000-000VE5 MLBAWT-P1-0000-000VZ5 MLBAWT-U1-0000-000VZ5 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 13 xlamp ml Family leds binning & labeling XLamp ML-B Standard Kit Codes - White Chromaticity Kit CCT A5 3750 K F6 E6 Z6 3500 K A6 A7 3250 K F7 E7 Z7 3000 K A8 A9 2850 K F8 Minimum Luminous Flux (lm) @ 80 mA* Order Codes Code Flux (lm) Typical CRI (80) J0 23.5 MLBAWT-A1-0000-000WA5 H0 18.1 MLBAWT-A1-0000-000VA5 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WF6 18.1 MLBAWT-A1-0000-000VF6 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WE6 MLBAWT-A1-0000-000VE6 H0 18.1 13.9 J0 23.5 MLBAWT-A1-0000-000WZ6 MLBAWT-A1-0000-000VZ6 H0 18.1 13.9 J0 23.5 MLBAWT-A1-0000-000WA6 MLBAWT-A1-0000-000VA6 18.1 23.5 MLBAWT-A1-0000-000WA7 18.1 MLBAWT-A1-0000-000VA7 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WF7 MLBAWT-A1-0000-000VF7 H0 18.1 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WE7 H0 18.1 MLBAWT-A1-0000-000VE7 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WZ7 MLBAWT-A1-0000-000VZ7 H0 18.1 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WA8 H0 18.1 MLBAWT-A1-0000-000VA8 G0 13.9 18.1 13.9 H0 18.1 G0 13.9 MLBAWT-P1-0000-000VF6 MLBAWT-U1-0000-000VF6 MLBAWT-H1-0000-000VE6 MLBAWT-P1-0000-000VE6 MLBAWT-U1-0000-000VE6 MLBAWT-H1-0000-000VZ6 MLBAWT-P1-0000-000VZ6 MLBAWT-U1-0000-000VZ6 MLBAWT-H1-0000-000VA6 MLBAWT-P1-0000-000VA6 MLBAWT-U1-0000-000VA6 MLBAWT-U1-0000-000UA6 J0 H0 MLBAWT-H1-0000-000VF6 MLBAWT-U1-0000-000UZ6 H0 G0 MLBAWT-U1-0000-000VA5 MLBAWT-U1-0000-000UE6 G0 13.9 MLBAWT-P1-0000-000VA5 90 CRI Minimum MLBAWT-U1-0000-000UF6 G0 H0 MLBAWT-H1-0000-000VA5 85 CRI Minimum MLBAWT-U1-0000-000UA5 H0 G0 80 CRI Minimum MLBAWT-A1-0000-000VA9 MLBAWT-A1-0000-000VF8 MLBAWT-H1-0000-000VA7 MLBAWT-H1-0000-000VF7 MLBAWT-H1-0000-000VE7 MLBAWT-H1-0000-000VZ7 MLBAWT-H1-0000-000VA8 MLBAWT-H1-0000-000VA9 MLBAWT-H1-0000-000VF8 MLBAWT-P1-0000-000VA7 MLBAWT-U1-0000-000VA7 MLBAWT-P1-0000-000UA7 MLBAWT-U1-0000-000UA7 MLBAWT-P1-0000-000VF7 MLBAWT-U1-0000-000VF7 MLBAWT-P1-0000-000UF7 MLBAWT-U1-0000-000UF7 MLBAWT-P1-0000-000VE7 MLBAWT-U1-0000-000VE7 MLBAWT-P1-0000-000UE7 MLBAWT-U1-0000-000UE7 MLBAWT-P1-0000-000VZ7 MLBAWT-U1-0000-000VZ7 MLBAWT-P1-0000-000UZ7 MLBAWT-U1-0000-000UZ7 MLBAWT-P1-0000-000VA8 MLBAWT-U1-0000-000VA8 MLBAWT-P1-0000-000UA8 MLBAWT-U1-0000-000UA8 MLBAWT-P1-0000-000VA9 MLBAWT-U1-0000-000VA9 MLBAWT-P1-0000-000UA9 MLBAWT-U1-0000-000UA9 MLBAWT-P1-0000-000VF8 MLBAWT-U1-0000-000VF8 MLBAWT-P1-0000-000UF8 MLBAWT-U1-0000-000UF8 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 14 xlamp ml Family leds binning & labeling XLamp ML-B Standard Kit Codes - White Chromaticity Kit CCT E8 Z8 2700 K AA EA 2200 K Minimum Luminous Flux (lm) @ 80 mA* Order Codes Code Flux (lm) Typical CRI (80) 80 CRI Minimum MLBAWT-A1-0000-000VE8 MLBAWT-H1-0000-000VE8 H0 18.1 G0 13.9 H0 18.1 85 CRI Minimum 90 CRI Minimum MLBAWT-P1-0000-000VE8 MLBAWT-U1-0000-000VE8 MLBAWT-P1-0000-000UE8 MLBAWT-U1-0000-000UE8 MLBAWT-U1-0000-000VZ8 MLBAWT-A1-0000-000VZ8 MLBAWT-H1-0000-000VZ8 MLBAWT-P1-0000-000VZ8 MLBAWT-P1-0000-000UZ8 MLBAWT-U1-0000-000UZ8 MLBAWT-A1-0000-000VAA MLBAWT-H1-0000-000VAA MLBAWT-P1-0000-000VAA MLBAWT-U1-0000-000VAA MLBAWT-P1-0000-000UAA MLBAWT-U1-0000-000UAA G0 13.9 H0 18.1 G0 13.9 G0 13.9 MLBAWT-A1-0000-000UEA F0 10.7 MLBAWT-A1-0000-000TEA Standard Order Codes and Bins (ML-C Parallel, Cool White, TJ = 25C) XLamp ML-C Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 100 mA* Kit Code CCT Flux (lm) Order Codes Typical CRI (75) 80 CRI Minimum ANSI Cool White (4500 K - 8300 K) DT 7000 K E0 51 6500 K E1 K3 35.2 K2 30.6 MLCAWT-A1-0000-0001DT MLCAWT-A1-0000-0000DT J3 26.8 MLCAWT-A1-0000-000XDT K3 35.2 MLCAWT-A1-0000-0001E0 K2 30.6 MLCAWT-A1-0000-0000E0 J3 26.8 MLCAWT-A1-0000-000XE0 K3 35.2 MLCAWT-A1-0000-000151 K2 30.6 MLCAWT-A1-0000-000051 J3 26.8 MLCAWT-A1-0000-000X51 K3 35.2 MLCAWT-A1-0000-0001E1 K2 30.6 MLCAWT-A1-0000-0000E1 MLCAWT-H1-0000-0000E1 J3 26.8 MLCAWT-A1-0000-000XE1 MLCAWT-H1-0000-000XE1 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 15 xlamp ml Family leds binning & labeling XLamp ML-C Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 100 mA* Kit Code Flux (lm) Typical CRI (75) K3 35.2 MLCAWT-A1-0000-000150 K2 30.6 MLCAWT-A1-0000-000050 50 DV E2 DY CCT 6200 K 6000 K 5750 K 5500 K DZ A1 5000 K E3 F4 4750 K A2 E4 4500 K Order Codes 80 CRI Minimum J3 26.8 MLCAWT-A1-0000-000X50 K3 35.2 MLCAWT-A1-0000-0001DV K2 30.6 MLCAWT-A1-0000-0000DV J3 26.8 MLCAWT-A1-0000-000XDV K3 35.2 MLCAWT-A1-0000-0001E2 K2 30.6 MLCAWT-A1-0000-0000E2 J3 26.8 MLCAWT-A1-0000-000XE2 K3 35.2 MLCAWT-A1-0000-0001DY K2 30.6 MLCAWT-A1-0000-0000DY J3 26.8 MLCAWT-A1-0000-000XDY K3 35.2 MLCAWT-A1-0000-0001DZ K2 30.6 MLCAWT-A1-0000-0000DZ J3 26.8 MLCAWT-A1-0000-000XDZ K3 35.2 MLCAWT-A1-0000-0001A1 K2 30.6 MLCAWT-A1-0000-0000A1 J3 26.8 MLCAWT-A1-0000-000XA1 K3 35.2 MLCAWT-A1-0000-0001E3 K2 30.6 MLCAWT-A1-0000-0000E3 MLCAWT-H1-0000-0000E3 J3 26.8 MLCAWT-A1-0000-000XE3 MLCAWT-H1-0000-000XE3 K3 35.2 MLCAWT-A1-0000-0001F4 K2 30.6 MLCAWT-A1-0000-0000F4 J3 26.8 MLCAWT-A1-0000-000XF4 K3 35.2 MLCAWT-A1-0000-0001A2 K2 30.6 MLCAWT-A1-0000-0000A2 J3 26.8 MLCAWT-A1-0000-000XA2 K3 35.2 MLCAWT-A1-0000-0001E4 K2 30.6 MLCAWT-A1-0000-0000E4 J3 26.8 MLCAWT-A1-0000-000XE4 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 16 xlamp ml Family leds binning & labeling Standard Order Codes and Bins (ML-C Parallel, Warm White, TJ = 25C) XLamp ML-C Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 100 mA* Kit Code Flux (lm) Typical CRI (80) K2 30.6 MLCAWT-A1-0000-0000A3 MLCAWT-A1-0000-000XA3 CCT Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2600 K - 4300 K) A3 F5 4300 K 4250 K E5 4000 K Z5 A4 A5 3750 K F6 E6 Z6 A6 3500 K J3 26.8 K2 30.6 MLCAWT-A1-0000-0000F5 J3 26.8 MLCAWT-A1-0000-000XF5 K2 30.6 MLCAWT-A1-0000-0000E5 MLCAWT-H1-0000-0000E5 J3 26.8 MLCAWT-A1-0000-000XE5 MLCAWT-H1-0000-000XE5 MLCAWT-P1-0000-000XE5 MLCAWT-H1-0000-000WE5 MLCAWT-P1-0000-000WE5 J2 23.5 H0 18.1 K2 30.6 MLCAWT-A1-0000-0000Z5 MLCAWT-A1-0000-000XZ5 MLCAWT-U1-0000-000VE5 J3 26.8 J2 23.5 H0 18.1 K2 30.6 MLCAWT-A1-0000-0000A4 MLCAWT-A1-0000-000XA4 MLCAWT-H1-0000-0000Z5 MLCAWT-H1-0000-000XZ5 MLCAWT-P1-0000-000XZ5 MLCAWT-H1-0000-000WZ5 MLCAWT-P1-0000-000WZ5 J3 26.8 30.6 MLCAWT-A1-0000-0000A5 MLCAWT-H1-0000-0000A5 J3 26.8 MLCAWT-A1-0000-000XA5 MLCAWT-H1-0000-000XA5 J2 23.5 H0 18.1 K2 30.6 MLCAWT-A1-0000-0000F6 J3 26.8 MLCAWT-A1-0000-000XF6 J2 23.5 H0 18.1 K2 30.6 MLCAWT-A1-0000-0000E6 MLCAWT-A1-0000-000XE6 J3 26.8 23.5 H0 18.1 MLCAWT-U1-0000-000WZ5 MLCAWT-U1-0000-000VZ5 K2 J2 MLCAWT-U1-0000-000WE5 MLCAWT-H1-0000-000WA5 MLCAWT-P1-0000-000XA5 MLCAWT-P1-0000-000WA5 MLCAWT-U1-0000-000WA5 MLCAWT-P1-0000-000VA5 MLCAWT-U1-0000-000VA5 MLCAWT-H1-0000-0000F6 MLCAWT-H1-0000-000XF6 MLCAWT-P1-0000-000XF6 MLCAWT-H1-0000-000WF6 MLCAWT-P1-0000-000WF6 MLCAWT-U1-0000-000WF6 MLCAWT-P1-0000-000VF6 MLCAWT-U1-0000-000VF6 MLCAWT-H1-0000-0000E6 MLCAWT-H1-0000-000XE6 MLCAWT-P1-0000-000XE6 MLCAWT-H1-0000-000WE6 MLCAWT-P1-0000-000WE6 MLCAWT-U1-0000-000WE6 MLCAWT-P1-0000-000VE6 MLCAWT-U1-0000-000VE6 K2 30.6 MLCAWT-A1-0000-0000Z6 MLCAWT-H1-0000-0000Z6 J3 26.8 MLCAWT-A1-0000-000XZ6 MLCAWT-H1-0000-000XZ6 MLCAWT-P1-0000-000XZ6 J2 23.5 MLCAWT-H1-0000-000WZ6 MLCAWT-P1-0000-000WZ6 MLCAWT-U1-0000-000WZ6 H0 18.1 MLCAWT-P1-0000-000VZ6 MLCAWT-U1-0000-000VZ6 K2 30.6 MLCAWT-A1-0000-0000A6 MLCAWT-A1-0000-000XA6 J3 26.8 J2 23.5 H0 18.1 MLCAWT-H1-0000-0000A6 MLCAWT-H1-0000-000XA6 MLCAWT-P1-0000-000XA6 MLCAWT-H1-0000-000WA6 MLCAWT-P1-0000-000WA6 MLCAWT-U1-0000-000WA6 MLCAWT-P1-0000-000VA6 MLCAWT-U1-0000-000VA6 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 17 xlamp ml Family leds binning & labeling XLamp ML-C Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 100 mA* Kit Code Flux (lm) K2 30.6 MLCAWT-A1-0000-0000A7 MLCAWT-H1-0000-0000A7 J3 26.8 MLCAWT-A1-0000-000XA7 MLCAWT-H1-0000-000XA7 J2 23.5 MLCAWT-A1-0000-000WA7 MLCAWT-H1-0000-000WA7 MLCAWT-P1-0000-000WA7 MLCAWT-U1-0000-000WA7 MLCAWT-H1-0000-000VA7 MLCAWT-P1-0000-000VA7 MLCAWT-U1-0000-000VA7 CCT A7 3250 K F7 E7 Z7 3000 K A8 A9 2850 K F8 E8 Z8 AA 2700 K Order Codes Typical CRI (80) 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum H0 18.1 K2 30.6 J3 26.8 MLCAWT-A1-0000-000XF7 MLCAWT-H1-0000-000XF7 J2 23.5 MLCAWT-A1-0000-000WF7 MLCAWT-H1-0000-000WF7 MLCAWT-P1-0000-000WF7 MLCAWT-U1-0000-000WF7 H0 18.1 MLCAWT-H1-0000-000VF7 MLCAWT-P1-0000-000VF7 MLCAWT-U1-0000-000VF7 K2 30.6 MLCAWT-A1-0000-0000E7 MLCAWT-H1-0000-0000E7 J3 26.8 MLCAWT-A1-0000-000XE7 MLCAWT-H1-0000-000XE7 MLCAWT-A1-0000-000WE7 MLCAWT-H1-0000-000WE7 MLCAWT-P1-0000-000WE7 MLCAWT-U1-0000-000WE7 MLCAWT-H1-0000-000VE7 MLCAWT-P1-0000-000VE7 MLCAWT-U1-0000-000VE7 MLCAWT-A1-0000-0000F7 MLCAWT-H1-0000-0000F7 J2 23.5 H0 18.1 K2 30.6 J3 26.8 MLCAWT-A1-0000-000XZ7 MLCAWT-H1-0000-000XZ7 J2 23.5 MLCAWT-A1-0000-000WZ7 MLCAWT-H1-0000-000WZ7 MLCAWT-P1-0000-000WZ7 MLCAWT-U1-0000-000WZ7 H0 18.1 MLCAWT-H1-0000-000VZ7 MLCAWT-P1-0000-000VZ7 MLCAWT-U1-0000-000VZ7 K2 30.6 MLCAWT-A1-0000-0000A8 MLCAWT-H1-0000-0000A8 J3 26.8 MLCAWT-A1-0000-000XA8 MLCAWT-H1-0000-000XA8 J2 23.5 MLCAWT-A1-0000-000WA8 MLCAWT-H1-0000-000WA8 MLCAWT-P1-0000-000WA8 MLCAWT-U1-0000-000WA8 H0 18.1 MLCAWT-H1-0000-000VA8 MLCAWT-P1-0000-000VA8 MLCAWT-U1-0000-000VA8 MLCAWT-A1-0000-0000Z7 MLCAWT-H1-0000-0000Z7 J3 26.8 MLCAWT-A1-0000-000XA9 MLCAWT-H1-0000-000XA9 J2 23.5 MLCAWT-A1-0000-000WA9 MLCAWT-H1-0000-000WA9 MLCAWT-P1-0000-000WA9 MLCAWT-U1-0000-000WA9 H0 18.1 MLCAWT-H1-0000-000VA9 MLCAWT-P1-0000-000VA9 MLCAWT-U1-0000-000VA9 J3 26.8 MLCAWT-A1-0000-000XF8 MLCAWT-H1-0000-000XF8 J2 23.5 MLCAWT-A1-0000-000WF8 MLCAWT-H1-0000-000WF8 MLCAWT-P1-0000-000WF8 MLCAWT-U1-0000-000WF8 H0 18.1 MLCAWT-H1-0000-000VF8 MLCAWT-P1-0000-000VF8 MLCAWT-U1-0000-000VF8 J3 26.8 MLCAWT-A1-0000-000XE8 MLCAWT-H1-0000-000XE8 MLCAWT-A1-0000-000WE8 MLCAWT-H1-0000-000WE8 MLCAWT-P1-0000-000WE8 MLCAWT-U1-0000-000WE8 MLCAWT-H1-0000-000VE8 MLCAWT-P1-0000-000VE8 MLCAWT-U1-0000-000VE8 J2 23.5 H0 18.1 J3 26.8 MLCAWT-A1-0000-000XZ8 MLCAWT-H1-0000-000XZ8 MLCAWT-A1-0000-000WZ8 MLCAWT-H1-0000-000WZ8 MLCAWT-P1-0000-000WZ8 MLCAWT-U1-0000-000WZ8 MLCAWT-H1-0000-000VZ8 MLCAWT-P1-0000-000VZ8 MLCAWT-U1-0000-000VZ8 J2 23.5 H0 18.1 J3 26.8 MLCAWT-A1-0000-000XAA MLCAWT-H1-0000-000XAA J2 23.5 MLCAWT-A1-0000-000WAA MLCAWT-H1-0000-000WAA MLCAWT-P1-0000-000WAA MLCAWT-U1-0000-000WAA H0 18.1 MLCAWT-H1-0000-000VAA MLCAWT-P1-0000-000VAA MLCAWT-U1-0000-000VAA Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 18 xlamp ml Family leds binning & labeling Standard Order Codes and Bins (ML-E Parallel, Cool White, TJ = 25C) XLamp ML-E Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 150 mA* Kit Code CCT Flux (lm) Order Codes Typical CRI (75) 80 CRI Minimum ANSI Cool White (4500 K - 8300 K) DT 7000 K E0 51 6500 K E1 50 DV E2 DY 6200 K 6000 K 5750 K 5500 K DZ A1 E3 5000 K N3 56.8 MLEAWT-A1-0000-0005DT N2 51.7 MLEAWT-A1-0000-0004DT M3 45.7 MLEAWT-A1-0000-0003DT N3 56.8 MLEAWT-A1-0000-0005E0 N2 51.7 MLEAWT-A1-0000-0004E0 M3 45.7 MLEAWT-A1-0000-0003E0 N3 56.8 MLEAWT-A1-0000-000551 N2 51.7 MLEAWT-A1-0000-000451 M3 45.7 MLEAWT-A1-0000-000351 N3 56.8 MLEAWT-A1-0000-0005E1 N2 51.7 MLEAWT-A1-0000-0004E1 M3 45.7 MLEAWT-A1-0000-0003E1 N3 56.8 MLEAWT-A1-0000-000550 MLEAWT-A1-0000-000450 N2 51.7 M3 45.7 MLEAWT-A1-0000-000350 N3 56.8 MLEAWT-A1-0000-0005DV N2 51.7 MLEAWT-A1-0000-0004DV M3 45.7 MLEAWT-A1-0000-0003DV N3 56.8 MLEAWT-A1-0000-0005E2 N2 51.7 MLEAWT-A1-0000-0004E2 M3 45.7 MLEAWT-A1-0000-0003E2 N3 56.8 MLEAWT-A1-0000-0005DY N2 51.7 MLEAWT-A1-0000-0004DY M3 45.7 MLEAWT-A1-0000-0003DY N3 56.8 MLEAWT-A1-0000-0005DZ N2 51.7 MLEAWT-A1-0000-0004DZ M3 45.7 MLEAWT-A1-0000-0003DZ N2 51.7 MLEAWT-A1-0000-0004A1 M3 45.7 MLEAWT-A1-0000-0003A1 M2 39.8 MLEAWT-A1-0000-0002A1 N3 56.8 MLEAWT-A1-0000-0005E3 N2 51.7 MLEAWT-A1-0000-0004E3 MLEAWT-H1-0000-0004E3 M3 45.7 MLEAWT-A1-0000-0003E3 MLEAWT-H1-0000-0003E3 M2 39.8 MLEAWT-A1-0000-0002E3 MLEAWT-H1-0000-0002E3 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 19 xlamp ml Family leds binning & labeling XLamp ML-E Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 150 mA* Kit Code Flux (lm) Typical CRI (75) N2 51.7 MLEAWT-A1-0000-0004F4 M3 45.7 MLEAWT-A1-0000-0003F4 M2 39.8 MLEAWT-A1-0000-0002F4 N2 51.7 MLEAWT-A1-0000-0004A2 M3 45.7 MLEAWT-A1-0000-0003A2 M2 39.8 MLEAWT-A1-0000-0002A2 N2 51.7 MLEAWT-A1-0000-0004E4 M3 45.7 MLEAWT-A1-0000-0003E4 M2 39.8 MLEAWT-A1-0000-0002E4 CCT F4 4750 K A2 E4 4500 K Order Codes 80 CRI Minimum Standard Order Codes and Bins (ML-E Parallel, Warm White, TJ = 25C) XLamp ML-E Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 150 mA* Kit Code Flux (lm) Typical CRI (80) N2 51.7 MLEAWT-A1-0000-0004A3 M3 45.7 MLEAWT-A1-0000-0003A3 M2 39.8 MLEAWT-A1-0000-0002A3 N2 51.7 MLEAWT-A1-0000-0004F5 M3 45.7 MLEAWT-A1-0000-0003F5 M2 39.8 MLEAWT-A1-0000-0002F5 N2 51.7 MLEAWT-A1-0000-0004E5 M3 45.7 MLEAWT-A1-0000-0003E5 MLEAWT-H1-0000-0003E5 MLEAWT-P1-0000-0003E5 M2 39.8 MLEAWT-A1-0000-0002E5 MLEAWT-H1-0000-0002E5 MLEAWT-P1-0000-0002E5 MLEAWT-U1-0000-0002E5 K3 35.2 MLEAWT-H1-0000-0001E5 MLEAWT-P1-0000-0001E5 MLEAWT-U1-0000-0001E5 N2 51.7 MLEAWT-A1-0000-0004Z5 M3 45.7 MLEAWT-A1-0000-0003Z5 MLEAWT-H1-0000-0003Z5 MLEAWT-P1-0000-0003Z5 M2 39.8 MLEAWT-A1-0000-0002Z5 MLEAWT-H1-0000-0002Z5 MLEAWT-P1-0000-0002Z5 MLEAWT-U1-0000-0002Z5 K3 35.2 MLEAWT-H1-0000-0001Z5 MLEAWT-P1-0000-0001Z5 MLEAWT-U1-0000-0001Z5 N2 51.7 MLEAWT-A1-0000-0004A4 M3 45.7 MLEAWT-A1-0000-0003A4 M2 39.8 MLEAWT-A1-0000-0002A4 M3 45.7 MLEAWT-A1-0000-0003A5 M2 39.8 MLEAWT-A1-0000-0002A5 MLEAWT-H1-0000-0002A5 MLEAWT-P1-0000-0002A5 MLEAWT-U1-0000-0002A5 MLEAWT-H1-0000-0001A5 MLEAWT-P1-0000-0001A5 MLEAWT-U1-0000-0001A5 MLEAWT-H1-0000-0002F6 MLEAWT-P1-0000-0002F6 MLEAWT-U1-0000-0002F6 MLEAWT-H1-0000-0001F6 MLEAWT-P1-0000-0001F6 MLEAWT-U1-0000-0001F6 CCT Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2600 K - 4300 K) A3 F5 4300 K 4250 K E5 Z5 4000 K A4 A5 3750 K F6 K3 35.2 M3 45.7 MLEAWT-A1-0000-0003F6 M2 39.8 MLEAWT-A1-0000-0002F6 K3 35.2 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 20 xlamp ml Family leds binning & labeling XLamp ML-E Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 150 mA* Kit Code Flux (lm) Typical CRI (80) M3 45.7 MLEAWT-A1-0000-0003E6 M2 39.8 MLEAWT-A1-0000-0002E6 K3 35.2 M3 45.7 MLEAWT-A1-0000-0003Z6 M2 39.8 MLEAWT-A1-0000-0002Z6 K3 35.2 M3 45.7 MLEAWT-A1-0000-0003A6 M2 39.8 MLEAWT-A1-0000-0002A6 K3 35.2 M3 45.7 M2 39.8 K3 35.2 K2 30.6 M3 45.7 MLEAWT-A1-0000-0003F7 M2 39.8 K3 35.2 CCT E6 Z6 3500 K A6 A7 3250 K F7 E7 Z7 3000 K A8 A9 2850 K F8 Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLEAWT-H1-0000-0002E6 MLEAWT-P1-0000-0002E6 MLEAWT-U1-0000-0002E6 MLEAWT-H1-0000-0001E6 MLEAWT-P1-0000-0001E6 MLEAWT-U1-0000-0001E6 MLEAWT-H1-0000-0002Z6 MLEAWT-P1-0000-0002Z6 MLEAWT-U1-0000-0002Z6 MLEAWT-H1-0000-0001Z6 MLEAWT-P1-0000-0001Z6 MLEAWT-U1-0000-0001Z6 MLEAWT-H1-0000-0002A6 MLEAWT-P1-0000-0002A6 MLEAWT-U1-0000-0002A6 MLEAWT-H1-0000-0001A6 MLEAWT-P1-0000-0001A6 MLEAWT-U1-0000-0001A6 MLEAWT-A1-0000-0002A7 MLEAWT-H1-0000-0002A7 MLEAWT-P1-0000-0002A7 MLEAWT-U1-0000-0002A7 MLEAWT-A1-0000-0001A7 MLEAWT-H1-0000-0001A7 MLEAWT-P1-0000-0001A7 MLEAWT-U1-0000-0001A7 MLEAWT-H1-0000-0000A7 MLEAWT-P1-0000-0000A7 MLEAWT-U1-0000-0000A7 MLEAWT-A1-0000-0002F7 MLEAWT-H1-0000-0002F7 MLEAWT-P1-0000-0002F7 MLEAWT-U1-0000-0002F7 MLEAWT-A1-0000-0001F7 MLEAWT-H1-0000-0001F7 MLEAWT-P1-0000-0001F7 MLEAWT-U1-0000-0001F7 MLEAWT-H1-0000-0000F7 MLEAWT-P1-0000-0000F7 MLEAWT-U1-0000-0000F7 MLEAWT-A1-0000-0003A7 K2 30.6 M3 45.7 MLEAWT-A1-0000-0003E7 M2 39.8 MLEAWT-A1-0000-0002E7 MLEAWT-H1-0000-0002E7 MLEAWT-P1-0000-0002E7 MLEAWT-U1-0000-0002E7 K3 35.2 MLEAWT-A1-0000-0001E7 MLEAWT-H1-0000-0001E7 MLEAWT-P1-0000-0001E7 MLEAWT-U1-0000-0001E7 K2 30.6 MLEAWT-H1-0000-0000E7 MLEAWT-P1-0000-0000E7 MLEAWT-U1-0000-0000E7 M3 45.7 MLEAWT-A1-0000-0003Z7 M2 39.8 MLEAWT-A1-0000-0002Z7 MLEAWT-H1-0000-0002Z7 MLEAWT-P1-0000-0002Z7 MLEAWT-U1-0000-0002Z7 K3 35.2 MLEAWT-A1-0000-0001Z7 MLEAWT-H1-0000-0001Z7 MLEAWT-P1-0000-0001Z7 MLEAWT-U1-0000-0001Z7 K2 30.6 MLEAWT-H1-0000-0000Z7 MLEAWT-P1-0000-0000Z7 MLEAWT-U1-0000-0000Z7 M3 45.7 MLEAWT-A1-0000-0003A8 M2 39.8 MLEAWT-A1-0000-0002A8 MLEAWT-H1-0000-0002A8 MLEAWT-P1-0000-0002A8 MLEAWT-U1-0000-0002A8 K3 35.2 MLEAWT-A1-0000-0001A8 MLEAWT-H1-0000-0001A8 MLEAWT-P1-0000-0001A8 MLEAWT-U1-0000-0001A8 K2 30.6 MLEAWT-H1-0000-0000A8 MLEAWT-P1-0000-0000A8 MLEAWT-U1-0000-0000A8 M2 39.8 MLEAWT-A1-0000-0002A9 MLEAWT-A1-0000-0001A9 MLEAWT-H1-0000-0001A9 MLEAWT-P1-0000-0001A9 MLEAWT-U1-0000-0001A9 MLEAWT-H1-0000-0000A9 MLEAWT-P1-0000-0000A9 MLEAWT-U1-0000-0000A9 MLEAWT-H1-0000-0001F8 MLEAWT-P1-0000-0001F8 MLEAWT-U1-0000-0001F8 MLEAWT-H1-0000-0000F8 MLEAWT-P1-0000-0000F8 MLEAWT-U1-0000-0000F8 K3 35.2 K2 30.6 M2 39.8 MLEAWT-A1-0000-0002F8 K3 35.2 MLEAWT-A1-0000-0001F8 K2 30.6 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 21 xlamp ml Family leds binning & labeling XLamp ML-E Parallel, Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 150 mA* Kit Code Flux (lm) Typical CRI (80) M2 39.8 MLEAWT-A1-0000-0002E8 K3 35.2 MLEAWT-A1-0000-0001E8 K2 30.6 M2 39.8 MLEAWT-A1-0000-0002Z8 K3 35.2 MLEAWT-A1-0000-0001Z8 K2 30.6 M2 39.8 MLEAWT-A1-0000-0002AA K3 35.2 MLEAWT-A1-0000-0001AA K2 30.6 CCT E8 Z8 AA 2700 K Order Codes 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLEAWT-H1-0000-0001E8 MLEAWT-P1-0000-0001E8 MLEAWT-U1-0000-0001E8 MLEAWT-H1-0000-0000E8 MLEAWT-P1-0000-0000E8 MLEAWT-U1-0000-0000E8 MLEAWT-H1-0000-0001Z8 MLEAWT-P1-0000-0001Z8 MLEAWT-U1-0000-0001Z8 MLEAWT-H1-0000-0000Z8 MLEAWT-P1-0000-0000Z8 MLEAWT-U1-0000-0000Z8 MLEAWT-H1-0000-0001AA MLEAWT-P1-0000-0001AA MLEAWT-U1-0000-0001AA MLEAWT-H1-0000-0000AA MLEAWT-P1-0000-0000AA MLEAWT-U1-0000-0000AA Standard Order Codes and Bins (ML-C Series, Cool White, TJ = 25 C) XLamp ML-C Series, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Code Flux (lm) Order Codes Typical CRI (75) 80 CRI Minimum ANSI Cool White (4500 K - 8300 K) DT 7000 K E0 51 6500 K E1 K3 35.2 K2 30.6 MLCSWT-A1-0000-0001DT MLCSWT-A1-0000-0000DT J3 26.8 MLCSWT-A1-0000-000XDT K3 35.2 MLCSWT-A1-0000-0001E0 K2 30.6 MLCSWT-A1-0000-0000E0 J3 26.8 MLCSWT-A1-0000-000XE0 K3 35.2 MLCSWT-A1-0000-000151 K2 30.6 MLCSWT-A1-0000-000051 J3 26.8 MLCSWT-A1-0000-000X51 K3 35.2 MLCSWT-A1-0000-0001E1 K2 30.6 MLCSWT-A1-0000-0000E1 MLCSWT-H1-0000-0000E1 J3 26.8 MLCSWT-A1-0000-000XE1 MLCSWT-H1-0000-000XE1 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 22 xlamp ml Family leds binning & labeling XLamp ML-C Series, Standard Kit Codes - White Chromaticity Kit 50 DV E2 DY CCT 6200 K 6000 K 5750 K 5500 K DZ A1 5000 K E3 F4 4750 K A2 E4 4500 K Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) Typical CRI (75) K3 35.2 MLCSWT-A1-0000-000150 K2 30.6 MLCSWT-A1-0000-000050 J3 26.8 MLCSWT-A1-0000-000X50 K3 35.2 MLCSWT-A1-0000-0001DV 80 CRI Minimum K2 30.6 MLCSWT-A1-0000-0000DV J3 26.8 MLCSWT-A1-0000-000XDV K3 35.2 MLCSWT-A1-0000-0001E2 K2 30.6 MLCSWT-A1-0000-0000E2 J3 26.8 MLCSWT-A1-0000-000XE2 K3 35.2 MLCSWT-A1-0000-0001DY K2 30.6 MLCSWT-A1-0000-0000DY J3 26.8 MLCSWT-A1-0000-000XDY K3 35.2 MLCSWT-A1-0000-0001DZ K2 30.6 MLCSWT-A1-0000-0000DZ J3 26.8 MLCSWT-A1-0000-000XDZ K3 35.2 MLCSWT-A1-0000-0001A1 K2 30.6 MLCSWT-A1-0000-0000A1 J3 26.8 MLCSWT-A1-0000-000XA1 K3 35.2 MLCSWT-A1-0000-0001E3 K2 30.6 MLCSWT-A1-0000-0000E3 MLCSWT-H1-0000-0000E3 J3 26.8 MLCSWT-A1-0000-000XE3 MLCSWT-H1-0000-000XE3 K3 35.2 MLCSWT-A1-0000-0001F4 K2 30.6 MLCSWT-A1-0000-0000F4 J3 26.8 MLCSWT-A1-0000-000XF4 K3 35.2 MLCSWT-A1-0000-0001A2 K2 30.6 MLCSWT-A1-0000-0000A2 J3 26.8 MLCSWT-A1-0000-000XA2 K3 35.2 MLCSWT-A1-0000-0001E4 K2 30.6 MLCSWT-A1-0000-0000E4 J3 26.8 MLCSWT-A1-0000-000XE4 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 23 xlamp ml Family leds binning & labeling Standard Order Codes and Bins (ML-C Series, Warm White, TJ = 25C) XLamp ML-C Series, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) Typical CRI (80) K2 30.6 MLCSWT-A1-0000-0000A3 MLCSWT-A1-0000-000XA3 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2600 K - 4300 K) A3 F5 4300 K 4250 K E5 4000 K Z5 A4 A5 3750 K F6 E6 Z6 A6 3500 K J3 26.8 K2 30.6 MLCSWT-A1-0000-0000F5 J3 26.8 MLCSWT-A1-0000-000XF5 K2 30.6 MLCSWT-A1-0000-0000E5 MLCSWT-H1-0000-0000E5 J3 26.8 MLCSWT-A1-0000-000XE5 MLCSWT-H1-0000-000XE5 MLCSWT-P1-0000-000XE5 MLCSWT-H1-0000-000WE5 MLCSWT-P1-0000-000WE5 J2 23.5 H0 18.1 K2 30.6 MLCSWT-A1-0000-0000Z5 MLCSWT-A1-0000-000XZ5 MLCSWT-U1-0000-000WE5 MLCSWT-U1-0000-000VE5 J3 26.8 J2 23.5 H0 18.1 K2 30.6 MLCSWT-A1-0000-0000A4 MLCSWT-A1-0000-000XA4 MLCSWT-H1-0000-0000Z5 MLCSWT-H1-0000-000XZ5 MLCSWT-P1-0000-000XZ5 MLCSWT-H1-0000-000WZ5 MLCSWT-P1-0000-000WZ5 MLCSWT-U1-0000-000WZ5 MLCSWT-U1-0000-000VZ5 J3 26.8 K2 30.6 MLCSWT-A1-0000-0000A5 MLCSWT-H1-0000-0000A5 J3 26.8 MLCSWT-A1-0000-000XA5 MLCSWT-H1-0000-000XA5 MLCSWT-P1-0000-000XA5 J2 23.5 MLCSWT-H1-0000-000WA5 MLCSWT-P1-0000-000WA5 MLCSWT-U1-0000-000WA5 H0 18.1 MLCSWT-P1-0000-000VA5 MLCSWT-U1-0000-000VA5 K2 30.6 MLCSWT-A1-0000-0000F6 MLCSWT-A1-0000-000XF6 MLCSWT-H1-0000-0000F6 J3 26.8 J2 23.5 H0 18.1 K2 30.6 MLCSWT-A1-0000-0000E6 J3 26.8 MLCSWT-A1-0000-000XE6 J2 23.5 H0 18.1 K2 30.6 MLCSWT-A1-0000-0000Z6 MLCSWT-H1-0000-0000Z6 J3 26.8 MLCSWT-A1-0000-000XZ6 MLCSWT-H1-0000-000XZ6 MLCSWT-P1-0000-000XZ6 J2 23.5 MLCSWT-H1-0000-000WZ6 MLCSWT-P1-0000-000WZ6 MLCSWT-U1-0000-000WZ6 H0 18.1 MLCSWT-P1-0000-000VZ6 MLCSWT-U1-0000-000VZ6 K2 30.6 MLCSWT-A1-0000-0000A6 MLCSWT-A1-0000-000XA6 J3 26.8 J2 23.5 H0 18.1 MLCSWT-H1-0000-000XF6 MLCSWT-P1-0000-000XF6 MLCSWT-H1-0000-000WF6 MLCSWT-P1-0000-000WF6 MLCSWT-U1-0000-000WF6 MLCSWT-P1-0000-000VF6 MLCSWT-U1-0000-000VF6 MLCSWT-H1-0000-0000E6 MLCSWT-H1-0000-000XE6 MLCSWT-P1-0000-000XE6 MLCSWT-H1-0000-000WE6 MLCSWT-P1-0000-000WE6 MLCSWT-U1-0000-000WE6 MLCSWT-P1-0000-000VE6 MLCSWT-U1-0000-000VE6 MLCSWT-H1-0000-0000A6 MLCSWT-H1-0000-000XA6 MLCSWT-P1-0000-000XA6 MLCSWT-H1-0000-000WA6 MLCSWT-P1-0000-000WA6 MLCSWT-U1-0000-000WA6 MLCSWT-P1-0000-000VA6 MLCSWT-U1-0000-000VA6 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 24 xlamp ml Family leds binning & labeling XLamp ML-C Series, Standard Kit Codes - White Chromaticity Kit CCT A7 3250 K F7 E7 Z7 3000 K A8 A9 2850 K F8 E8 Z8 AA 2700 K Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) K2 30.6 MLCSWT-A1-0000-0000A7 MLCSWT-H1-0000-0000A7 J3 26.8 MLCSWT-A1-0000-000XA7 MLCSWT-H1-0000-000XA7 J2 23.5 MLCSWT-A1-0000-000WA7 MLCSWT-H1-0000-000WA7 MLCSWT-P1-0000-000WA7 MLCSWT-U1-0000-000WA7 MLCSWT-H1-0000-000VA7 MLCSWT-P1-0000-000VA7 MLCSWT-U1-0000-000VA7 H0 18.1 K2 30.6 Typical CRI (80) MLCSWT-A1-0000-0000F7 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLCSWT-H1-0000-0000F7 J3 26.8 MLCSWT-A1-0000-000XF7 MLCSWT-H1-0000-000XF7 J2 23.5 MLCSWT-A1-0000-000WF7 MLCSWT-H1-0000-000WF7 MLCSWT-P1-0000-000WF7 MLCSWT-U1-0000-000WF7 H0 18.1 MLCSWT-H1-0000-000VF7 MLCSWT-P1-0000-000VF7 MLCSWT-U1-0000-000VF7 K2 30.6 MLCSWT-A1-0000-0000E7 MLCSWT-H1-0000-0000E7 J3 26.8 MLCSWT-A1-0000-000XE7 MLCSWT-H1-0000-000XE7 MLCSWT-A1-0000-000WE7 MLCSWT-H1-0000-000WE7 MLCSWT-P1-0000-000WE7 MLCSWT-U1-0000-000WE7 MLCSWT-H1-0000-000VE7 MLCSWT-P1-0000-000VE7 MLCSWT-U1-0000-000VE7 J2 23.5 H0 18.1 K2 30.6 J3 26.8 MLCSWT-A1-0000-000XZ7 MLCSWT-H1-0000-000XZ7 J2 23.5 MLCSWT-A1-0000-000WZ7 MLCSWT-H1-0000-000WZ7 MLCSWT-P1-0000-000WZ7 MLCSWT-U1-0000-000WZ7 H0 18.1 MLCSWT-H1-0000-000VZ7 MLCSWT-P1-0000-000VZ7 MLCSWT-U1-0000-000VZ7 K2 30.6 MLCSWT-A1-0000-0000A8 MLCSWT-H1-0000-0000A8 J3 26.8 MLCSWT-A1-0000-000XA8 MLCSWT-H1-0000-000XA8 MLCSWT-A1-0000-000WA8 MLCSWT-H1-0000-000WA8 MLCSWT-P1-0000-000WA8 MLCSWT-U1-0000-000WA8 MLCSWT-H1-0000-000VA8 MLCSWT-P1-0000-000VA8 MLCSWT-U1-0000-000VA8 MLCSWT-A1-0000-0000Z7 MLCSWT-H1-0000-0000Z7 J2 23.5 H0 18.1 J3 26.8 MLCSWT-A1-0000-000XA9 MLCSWT-H1-0000-000XA9 J2 23.5 MLCSWT-A1-0000-000WA9 MLCSWT-H1-0000-000WA9 MLCSWT-P1-0000-000WA9 MLCSWT-U1-0000-000WA9 H0 18.1 MLCSWT-H1-0000-000VA9 MLCSWT-P1-0000-000VA9 MLCSWT-U1-0000-000VA9 J3 26.8 MLCSWT-A1-0000-000XF8 MLCSWT-H1-0000-000XF8 J2 23.5 MLCSWT-A1-0000-000WF8 MLCSWT-H1-0000-000WF8 MLCSWT-P1-0000-000WF8 MLCSWT-U1-0000-000WF8 H0 18.1 MLCSWT-H1-0000-000VF8 MLCSWT-P1-0000-000VF8 MLCSWT-U1-0000-000VF8 J3 26.8 MLCSWT-A1-0000-000XE8 MLCSWT-H1-0000-000XE8 MLCSWT-A1-0000-000WE8 MLCSWT-H1-0000-000WE8 MLCSWT-P1-0000-000WE8 MLCSWT-U1-0000-000WE8 MLCSWT-H1-0000-000VE8 MLCSWT-P1-0000-000VE8 MLCSWT-U1-0000-000VE8 J2 23.5 H0 18.1 J3 26.8 MLCSWT-A1-0000-000XZ8 MLCSWT-H1-0000-000XZ8 MLCSWT-A1-0000-000WZ8 MLCSWT-H1-0000-000WZ8 MLCSWT-P1-0000-000WZ8 MLCSWT-U1-0000-000WZ8 MLCSWT-H1-0000-000VZ8 MLCSWT-P1-0000-000VZ8 MLCSWT-U1-0000-000VZ8 J2 23.5 H0 18.1 J3 26.8 MLCSWT-A1-0000-000XAA MLCSWT-H1-0000-000XAA J2 23.5 MLCSWT-A1-0000-000WAA MLCSWT-H1-0000-000WAA MLCSWT-P1-0000-000WAA MLCSWT-U1-0000-000WAA H0 18.1 MLCSWT-H1-0000-000VAA MLCSWT-P1-0000-000VAA MLCSWT-U1-0000-000VAA Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 25 xlamp ml Family leds binning & labeling Standard Order Codes and Bins (ML-E Series, Cool White, TJ = 25C) XLamp ML-E Series, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Code Flux (lm) Order Codes Typical CRI (75) 80 CRI Minimum ANSI Cool White (4500 K - 8300 K) DT 7000 K E0 51 6500 K E1 50 DV E2 DY 6200 K 6000 K 5750 K 5500 K DZ A1 E3 5000 K N3 56.8 MLESWT-A1-0000-0005DT N2 51.7 MLESWT-A1-0000-0004DT M3 45.7 MLESWT-A1-0000-0003DT N3 56.8 MLESWT-A1-0000-0005E0 N2 51.7 MLESWT-A1-0000-0004E0 M3 45.7 MLESWT-A1-0000-0003E0 N3 56.8 MLESWT-A1-0000-000551 N2 51.7 MLESWT-A1-0000-000451 M3 45.7 MLESWT-A1-0000-000351 N3 56.8 MLESWT-A1-0000-0005E1 N2 51.7 MLESWT-A1-0000-0004E1 M3 45.7 MLESWT-A1-0000-0003E1 N3 56.8 MLESWT-A1-0000-000550 MLESWT-A1-0000-000450 N2 51.7 M3 45.7 MLESWT-A1-0000-000350 N3 56.8 MLESWT-A1-0000-0005DV N2 51.7 MLESWT-A1-0000-0004DV M3 45.7 MLESWT-A1-0000-0003DV N3 56.8 MLESWT-A1-0000-0005E2 N2 51.7 MLESWT-A1-0000-0004E2 M3 45.7 MLESWT-A1-0000-0003E2 N3 56.8 MLESWT-A1-0000-0005DY N2 51.7 MLESWT-A1-0000-0004DY M3 45.7 MLESWT-A1-0000-0003DY N3 56.8 MLESWT-A1-0000-0005DZ N2 51.7 MLESWT-A1-0000-0004DZ M3 45.7 MLESWT-A1-0000-0003DZ N2 51.7 MLESWT-A1-0000-0004A1 M3 45.7 MLESWT-A1-0000-0003A1 M2 39.8 MLESWT-A1-0000-0002A1 N3 56.8 MLESWT-A1-0000-0005E3 N2 51.7 MLESWT-A1-0000-0004E3 MLESWT-H1-0000-0004E3 M3 45.7 MLESWT-A1-0000-0003E3 MLESWT-H1-0000-0003E3 M2 39.8 MLESWT-A1-0000-0002E3 MLESWT-H1-0000-0002E3 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 26 xlamp ml Family leds binning & labeling XLamp ML-E Series, Standard Kit Codes - White Minimum Luminous Flux (lm) @ 50 mA* Chromaticity Kit CCT F4 4750 K A2 E4 4500 K Order Codes Code Flux (lm) Typical CRI (75) N2 51.7 MLESWT-A1-0000-0004F4 80 CRI Minimum M3 45.7 MLESWT-A1-0000-0003F4 M2 39.8 MLESWT-A1-0000-0002F4 N2 51.7 MLESWT-A1-0000-0004A2 M3 45.7 MLESWT-A1-0000-0003A2 M2 39.8 MLESWT-A1-0000-0002A2 N2 51.7 MLESWT-A1-0000-0004E4 M3 45.7 MLESWT-A1-0000-0003E4 M2 39.8 MLESWT-A1-0000-0002E4 Standard Order Codes and Bins (ML-E Series, Warm White, TJ = 25C) XLamp ML-E Series, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) Typical CRI (80) N2 51.7 MLESWT-A1-0000-0004A3 M3 45.7 MLESWT-A1-0000-0003A3 M2 39.8 MLESWT-A1-0000-0002A3 N2 51.7 MLESWT-A1-0000-0004F5 M3 45.7 MLESWT-A1-0000-0003F5 M2 39.8 MLESWT-A1-0000-0002F5 N2 51.7 MLESWT-A1-0000-0004E5 M3 45.7 MLESWT-A1-0000-0003E5 MLESWT-H1-0000-0003E5 MLESWT-P1-0000-0003E5 M2 39.8 MLESWT-A1-0000-0002E5 MLESWT-H1-0000-0002E5 MLESWT-P1-0000-0002E5 MLESWT-U1-0000-0002E5 K3 35.2 MLESWT-H1-0000-0001E5 MLESWT-P1-0000-0001E5 MLESWT-U1-0000-0001E5 N2 51.7 MLESWT-A1-0000-0004Z5 M3 45.7 MLESWT-A1-0000-0003Z5 MLESWT-H1-0000-0003Z5 MLESWT-P1-0000-0003Z5 M2 39.8 MLESWT-A1-0000-0002Z5 MLESWT-H1-0000-0002Z5 MLESWT-P1-0000-0002Z5 MLESWT-U1-0000-0002Z5 K3 35.2 MLESWT-H1-0000-0001Z5 MLESWT-P1-0000-0001Z5 MLESWT-U1-0000-0001Z5 N2 51.7 MLESWT-A1-0000-0004A4 M3 45.7 MLESWT-A1-0000-0003A4 M2 39.8 MLESWT-A1-0000-0002A4 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2600 K - 4300 K) A3 F5 4300 K 4250 K E5 Z5 A4 4000 K Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 27 xlamp ml Family leds binning & labeling XLamp ML-E Series, Standard Kit Codes - White Chromaticity Kit CCT A5 3750 K F6 E6 Z6 3500 K A6 A7 3250 K F7 E7 Z7 A8 3000 K Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) Typical CRI (80) M3 45.7 MLESWT-A1-0000-0003A5 M2 39.8 MLESWT-A1-0000-0002A5 K3 35.2 M3 45.7 MLESWT-A1-0000-0003F6 M2 39.8 MLESWT-A1-0000-0002F6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003E6 M2 39.8 MLESWT-A1-0000-0002E6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003Z6 M2 39.8 MLESWT-A1-0000-0002Z6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003A6 M2 39.8 MLESWT-A1-0000-0002A6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003A7 M2 39.8 K3 35.2 K2 30.6 M3 45.7 MLESWT-A1-0000-0003F7 M2 39.8 K3 35.2 K2 30.6 M3 45.7 MLESWT-A1-0000-0003E7 M2 39.8 K3 35.2 K2 30.6 M3 45.7 MLESWT-A1-0000-0003Z7 M2 39.8 K3 35.2 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLESWT-H1-0000-0002A5 MLESWT-P1-0000-0002A5 MLESWT-U1-0000-0002A5 MLESWT-H1-0000-0001A5 MLESWT-P1-0000-0001A5 MLESWT-U1-0000-0001A5 MLESWT-H1-0000-0002F6 MLESWT-P1-0000-0002F6 MLESWT-U1-0000-0002F6 MLESWT-H1-0000-0001F6 MLESWT-P1-0000-0001F6 MLESWT-U1-0000-0001F6 MLESWT-H1-0000-0002E6 MLESWT-P1-0000-0002E6 MLESWT-U1-0000-0002E6 MLESWT-H1-0000-0001E6 MLESWT-P1-0000-0001E6 MLESWT-U1-0000-0001E6 MLESWT-H1-0000-0002Z6 MLESWT-P1-0000-0002Z6 MLESWT-U1-0000-0002Z6 MLESWT-H1-0000-0001Z6 MLESWT-P1-0000-0001Z6 MLESWT-U1-0000-0001Z6 MLESWT-H1-0000-0002A6 MLESWT-P1-0000-0002A6 MLESWT-U1-0000-0002A6 MLESWT-H1-0000-0001A6 MLESWT-P1-0000-0001A6 MLESWT-U1-0000-0001A6 MLESWT-A1-0000-0002A7 MLESWT-H1-0000-0002A7 MLESWT-P1-0000-0002A7 MLESWT-U1-0000-0002A7 MLESWT-A1-0000-0001A7 MLESWT-H1-0000-0001A7 MLESWT-P1-0000-0001A7 MLESWT-U1-0000-0001A7 MLESWT-H1-0000-0000A7 MLESWT-P1-0000-0000A7 MLESWT-U1-0000-0000A7 MLESWT-A1-0000-0002F7 MLESWT-H1-0000-0002F7 MLESWT-P1-0000-0002F7 MLESWT-U1-0000-0002F7 MLESWT-A1-0000-0001F7 MLESWT-H1-0000-0001F7 MLESWT-P1-0000-0001F7 MLESWT-U1-0000-0001F7 MLESWT-H1-0000-0000F7 MLESWT-P1-0000-0000F7 MLESWT-U1-0000-0000F7 MLESWT-A1-0000-0002E7 MLESWT-H1-0000-0002E7 MLESWT-P1-0000-0002E7 MLESWT-U1-0000-0002E7 MLESWT-A1-0000-0001E7 MLESWT-H1-0000-0001E7 MLESWT-P1-0000-0001E7 MLESWT-U1-0000-0001E7 MLESWT-H1-0000-0000E7 MLESWT-P1-0000-0000E7 MLESWT-U1-0000-0000E7 MLESWT-A1-0000-0002Z7 MLESWT-H1-0000-0002Z7 MLESWT-P1-0000-0002Z7 MLESWT-U1-0000-0002Z7 MLESWT-A1-0000-0001Z7 MLESWT-H1-0000-0001Z7 MLESWT-P1-0000-0001Z7 MLESWT-U1-0000-0001Z7 MLESWT-H1-0000-0000Z7 MLESWT-P1-0000-0000Z7 MLESWT-U1-0000-0000Z7 K2 30.6 M3 45.7 MLESWT-A1-0000-0003A8 M2 39.8 MLESWT-A1-0000-0002A8 MLESWT-H1-0000-0002A8 MLESWT-P1-0000-0002A8 MLESWT-U1-0000-0002A8 K3 35.2 MLESWT-A1-0000-0001A8 MLESWT-H1-0000-0001A8 MLESWT-P1-0000-0001A8 MLESWT-U1-0000-0001A8 K2 30.6 MLESWT-H1-0000-0000A8 MLESWT-P1-0000-0000A8 MLESWT-U1-0000-0000A8 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 28 xlamp ml Family leds binning & labeling XLamp ML-E Series, Standard Kit Codes - White Chromaticity Kit CCT A9 2850 K F8 E8 Z8 AA 2700 K Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) Typical CRI (80) M2 39.8 MLESWT-A1-0000-0002A9 K3 35.2 MLESWT-A1-0000-0001A9 K2 30.6 M2 39.8 MLESWT-A1-0000-0002F8 K3 35.2 MLESWT-A1-0000-0001F8 K2 30.6 M2 39.8 MLESWT-A1-0000-0002E8 K3 35.2 MLESWT-A1-0000-0001E8 K2 30.6 M2 39.8 MLESWT-A1-0000-0002Z8 K3 35.2 MLESWT-A1-0000-0001Z8 K2 30.6 M2 39.8 MLESWT-A1-0000-0002AA K3 35.2 MLESWT-A1-0000-0001AA K2 30.6 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLESWT-H1-0000-0001A9 MLESWT-P1-0000-0001A9 MLESWT-U1-0000-0001A9 MLESWT-H1-0000-0000A9 MLESWT-P1-0000-0000A9 MLESWT-U1-0000-0000A9 MLESWT-H1-0000-0001F8 MLESWT-P1-0000-0001F8 MLESWT-U1-0000-0001F8 MLESWT-H1-0000-0000F8 MLESWT-P1-0000-0000F8 MLESWT-U1-0000-0000F8 MLESWT-H1-0000-0001E8 MLESWT-P1-0000-0001E8 MLESWT-U1-0000-0001E8 MLESWT-H1-0000-0000E8 MLESWT-P1-0000-0000E8 MLESWT-U1-0000-0000E8 MLESWT-H1-0000-0001Z8 MLESWT-P1-0000-0001Z8 MLESWT-U1-0000-0001Z8 MLESWT-H1-0000-0000Z8 MLESWT-P1-0000-0000Z8 MLESWT-U1-0000-0000Z8 MLESWT-H1-0000-0001AA MLESWT-P1-0000-0001AA MLESWT-U1-0000-0001AA MLESWT-H1-0000-0000AA MLESWT-P1-0000-0000AA MLESWT-U1-0000-0000AA Standard Order Codes and Bins (ML-C Color, TJ = 25C) XLamp ML-C Standard Kit Codes - Royal Blue Royal Blue Minimum Radiant Flux (lm) @ 100 mA* Order Codes Kit Dominant Wavelengh (nm) Code Flux (mW) 01 450 - 465 07 100 MLCROY-A1-0000-000201 02 450 - 460 07 100 MLCROY-A1-0000-000202 03 455 - 465 07 100 MLCROY-A1-0000-000203 Standard Order Codes and Bins (ML-E Color, TJ = 25C) XLamp ML-E Standard Kit Codes - Royal Blue Royal Blue Kit Dominant Wavelengh (nm) Minimum Radiant Flux (lm) @ 150 mA* Code Order Codes Flux (mW) 01 450 - 465 10 175 MLEROY-A1-0000-000501 02 450 - 460 10 175 MLEROY-A1-0000-000502 03 455 - 465 10 175 MLEROY-A1-0000-000503 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80 * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 29 xlamp ml Family leds binning & labeling XLamp ML-E Standard Kit Codes - Blue Minimum Luminous Flux (lm) @ 150 mA* Blue Kit Dominant Wavelengh (nm) 01 465 - 485 02 465 - 480 05 470 - 480 Order Codes Code Flux (lm) G0 13.9 F0 10.7 MLEBLU-A1-0000-000T01 G0 13.9 MLEBLU-A1-0000-000U02 F0 10.7 MLEBLU-A1-0000-000T02 G0 13.9 MLEBLU-A1-0000-000U05 F0 10.7 MLEBLU-A1-0000-000T05 MLEBLU-A1-0000-000U01 XLamp ML-E Standard Kit Codes - Green Minimum Luminous Flux (lm) @ 150 mA* Green Kit Dominant Wavelengh (nm) 01 520 - 535 02 03 520 - 530 525 - 535 Order Codes Code Flux (lm) K3 35.2 MLEGRN-A1-0000-000101 K2 30.6 MLEGRN-A1-0000-000001 J3 26.8 MLEGRN-A1-0000-000X01 K3 35.2 MLEGRN-A1-0000-000102 K2 30.6 MLEGRN-A1-0000-000002 J3 26.8 MLEGRN-A1-0000-000X02 K3 35.2 MLEGRN-A1-0000-000103 K2 30.6 MLEGRN-A1-0000-000003 J3 26.8 MLEGRN-A1-0000-000X03 XLamp ML-E Standard Kit Codes - Amber Amber Minimum Luminous Flux (lm) @ 150 mA* Kit Dominant Wavelengh (nm) Code Flux (lm) 01 585 - 595 K2 30.6 MLEAMB-A1-0000-000001 J3 26.8 MLEAMB-A1-0000-000X01 Order Codes XLamp ML-E Standard Kit Codes - Red Red Kit Dominant Wavelengh (nm) 01 620 - 630 02 620 - 625 03 625 - 630 Minimum Luminous Flux (lm) @ 150 mA* Code Order Codes Flux (lm) J2 23.5 H0 18.1 MLERED-A1-0000-000W01 MLERED-A1-0000-000V01 J2 23.5 MLERED-A1-0000-000W02 H0 18.1 MLERED-A1-0000-000V02 H0 18.1 MLERED-A1-0000-000V03 Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Cree XLamp order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. Copyright (c) 2009-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at sales@cree.com. 30