586-907 - WHITE RODGERS - Datasheet.Live

www.stancor.com

56

RElAYS AND CONTACTORS

Type 586 SPDT

D.C. Power Contactors – Type 586

Engineering Design Data

Operation in % of Nom. Breakdown Voltages

Coil Rating Coil Voltage Rating All Terminals - 60 Hz RMS Contact Material Electrical Life Mechanical Life

Nominal Open Max.

Magnetic Max. Contacts Oper. Oper. Oper.

D.C. Coil Rating Safe Opposite Same To Oper. At Per Oper. At Per Temp.

Type (Watts) Pick-up Operate Polarity Polarity Ground Power Pilot Rated Load Min. No Load Min °F

586 8 - SPNO 75% 110% 500 500 500 Silver Alloy - 50,000 2 100,000 30 150

12 - SPDT

For outline drawings refer to page 57.

Temperature Range

–– -40˚F to 150˚F

Terminations

–– Contacts: 5/16"-24 UNF-2A thread

–– Coil: #10-32 UNF-2A thread

Recommended Mounting

–– Vertical plane with coil terminals up.

Hardware Torque Specification

–– Contact Terminal: 60 inch-lbs., max.

–– Coil Terminal: 12-18 inch lbs.

–– Water Resistant

* Terminal Type: “4” = Isolated Coil

“6” = Isolated Coil

** Inrush Current: Current applied within the first 1/2 second of contact closure

Coil Contact Rating-(Amps.) DIMENSIONS

STANCOR Coil Resistance Inductive Load INCHES

PART Duty Terminal Pole Bracket Volt. (Ohms) Contact Volt. Normally Open Normally Closed Case Weight Agency

Sec. NUMBER Cycle Type* Form Style D.C. @25˚C Material D.C. Continuous Inrush** Continuous Inrush** L W H (oz.) Certif.

A 586-901 Continuous 4 SPNO Standard 6 5.3 Silver Alloy 6 200 600 - - 3.69 3.30 2.90 24.0 -

586-902 Continuous 4 SPNO Standard 12 21.0 Silver Alloy 12 200 600 - - 3.69 3.30 2.90 24.0 -

586-903 Continuous 4 SPNO Standard 15 32.8 Silver Alloy 15 200 600 - - 3.69 3.30 2.90 24.0 -

B 586-905 Continuous 4 SPNO Standard 24 84.0 Silver Alloy 24 200 600 - - 3.69 3.30 2.90 24.0 -

586-906 Continuous 4 SPNO Standard 36 189.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 -

586-907 Continuous 4 SPNO Standard 48 336.0 Silver Alloy 36 200 600 - - 3.69 3.30 2.90 24.0 -

C 586-911 Continuous 6 SPDT Standard 12 13.2 Silver Alloy 12 200 600 100 300 4.61 3.30 2.90 26.0 -

586-914 Continuous 6 SPDT Standard 24 53.0 Silver Alloy 24 200 600 100 200 4.61 3.30 2.90 26.0 -

586-915 Continuous 6 SPDT Standard 36 120.0 Silver Alloy 36 200 600 100 200 4.61 3.30 2.90 26.0 -

Type 586 Custom Design Capabilities

–– Coil voltages 6 VDC through 48 VDC

–– High vibration

–– Please complete application data form on page 95 of this section.

Note:

Caution must be used in coil selection for use in 12 volt systems where battery charging may expose coil to continuous,

higher-than-rated voltage. Stancor will not be responsible for consequences of misapplied solenoids.

Type 586 SPNO