Published Date : FEB 26, 2008 Drawing No : SDSA4498 V3 Checked : B.L.LIU P.1/4
Part Number: ZMY88W
3.2x1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
www.SunLED.com
Part
Number
Emitting
Color
Emitting
Material Lens-color
Luminous
Intensity
(IF=20mA)
mcd
Wavelength
nm
λP
Viewing
Angle
2θ1/2
min. typ.
ZMY88W Yellow InGaAlP Water Clear 70 178 590 120°
Features
z3.2mmx1.0mm RIGHT ANGLE SMT LED, 1.5mm
THICKNESS.
zLOW POWER CONSUMPTION.
zWIDE VIEWING ANGLE.
zIDEAL FOR BACKLIGHT AND INDICATOR.
zPACKAGE : 2000PCS / REEL.
zMOISTURE SENSITIVITY LEVEL : LEVEL 3.
zRoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
MY
(InGaAlP) Unit
Reverse Voltage VR 5 V
Forward Current IF 30 mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS 150 mA
Power Dissipation PT 75 mW
Operating Temperature TA -40 ~ +85
°C
Storage Temperature Tstg -40 ~ +85
MY
(InGaAlP) Unit
Forward Voltage (Typ.)
(IF=20mA) VF 2.0 V
Forward Voltage (Max.)
(IF=20mA) VF 2.5 V
Reverse Current (Max.)
(VR=5V) IR 10 uA
Wavelength Of Peak
Emission (Typ.)
(IF=20mA)
λP 590 nm
Wavelength Of Dominant
Emission (Typ.)
(IF=20mA)
λD 588 nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
Δλ 28 nm
Capacitance (Typ.)
(VF=0V, f=1MHz) C 25 pF
Operating Characteristics
(TA=25°C)
Published Date : FEB 26, 2008 Drawing No : SDSA4498 V3 Checked : B.L.LIU P.2/4
Part Number: ZMY88W
3.2x1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
www.SunLED.com
MY
Published Date : FEB 26, 2008 Drawing No : SDSA4498 V3 Checked : B.L.LIU P.3/4
Part Number: ZMY88W
3.2x1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
www.SunLED.com
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Tape Specification (Units : mm)
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
The device has a single mounting surface. The device
must be mounted according to the specifications.
Published Date : FEB 26, 2008 Drawing No : SDSA4498 V3 Checked : B.L.LIU P.4/4
Part Number: ZMY88W
3.2x1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
www.SunLED.com
PACKING & LABEL SPECIFICATIONS ZMY88W
