3680 Kombinierte RAST-5-Messer-/Buchsenleiste, stehend, mit Zwischenwanden/-raumen und Null- und/oder Schutzleiterbrucke in Schneidklemmtechnik (SKT) 1. Temperaturbereich -40 C/+120 C 2. Werkstoffe Kontakttrager1 Kontaktmesser ohne Schneidklemmanschluss mit Schneidklemmanschluss Kontaktfeder PA GF, V0 nach UL 94 CuZn, unternickelt und verzinnt CuSn, unternickelt und verzinnt CuSn, verzinnt 3. Mechanische Daten Messerleiste Kontaktmesser Kontaktierung mit 6,3 x 0,8 mm nach DIN 46244 Steckverbindern 3611, 3615, 3623, 3626, 3647, Steckverbindern nach RAST-5Standard Buchsenleiste 4,0 N Steckkraft/Kontakt2 1,0 N Ziehkraft/Kontakt2 Ausdruckkraft/Kontakt aus Kontakttrager 4,0 N Messerleisten 3618, 3647, Kontaktierung mit Messerleisten nach RAST-5-Standard Bruckenleiter Schaltlitze LiY 0,75 mm2 nach H05V-K 4. Elektrische Daten (bei TU 20 C) Durchgangswiderstand Bemessungsstrom Bemessungsspannung3 Isolierstoffgruppe3 Kriechstrecke Luftstrecke Isolationswiderstand 1 2 3 5 m 10 A bei TU 70 C 250 V AC IIIa (CTI 350) 4,0 mm 4,0 mm > 10 G Bauteil gluhdrahtbestandig (GWT 750 C), Prufung nach IEC 60695-2-11, Beurteilung nach IEC 60335-1 (Flamme < 2 s) gemessen mit einem polierten Stahlflachstift, Nennma 0,8 mm nach DIN EN 60664/IEC 60664 Reg.-Nr. 116633 *a K = Kodierung K = keying K = codage P = Positionierung P = positioning P = positionnement V = Raum fur Verriegelung V = space for lock V = emplacement pour verrouillage *b Zwischenraum fur Wande der Messerleisten space for frames of tab headers emplacement pour cadres des reglettes a couteaux *c Null- und Schutzleiterbrucke neutral and protective conductor bridge conducteurs neutre et de protection pontes *d Messerleiste tab header reglette a couteaux *e Buchsenleiste socket board reglette a prises femelles *f Ma fur Presssitz auf der Leiterplatte measure for press-fit on printed circuit board mesure pour autofixation sur carte imprimee par pression *g Lochbild in der Leiterplatte, von der Bauteilseite gesehen printed circuit board layout, components side view modele de la carte imprimee, vue du cote a equiper www.lumberg.com 11/2012 RAST-5-Steckverbinder, Raster 5,0 mm RAST 5 connectors, pitch 5.0 mm Connecteurs RAST 5, pas 5,0 mm 3680 3680 Combined RAST 5 tab and socket board, upright, with partitions and neutral and/or protective conductor bridge in insulation displacement technology (IDT) Reglette combinee a couteaux et prises femelles RAST 5, droite, avec separations et conducteur neutre et/ou de protection pontes en technologie de deplacement d'isolant 1. Temperature range 1. Temperature d'utilisation -40 C/+120 C -40 C/+120 C 2. Materiaux 2. Materials Corps isolant1 PA GF, V0 suivant UL 94 Contact a couteau sans terminal a deplacement d'isolant CuZn, sous-nickele et etame avec terminal a deplacement d'isolant CuSn, sous-nickele et etame Ressort de contact CuSn, etame PA GF, V0 according to UL 94 Insulating body1 Contact tab without insulation displacem. terminal CuZn, pre-nickeled and tinned with insulation displacement terminal CuSn, pre-nickeled and tinned Contact spring CuSn, tinned 3. Caracteristiques mecaniques 3. Mechanical data Tab header Contact tab Mating with Reglette a couteaux Contact a couteau Raccordement avec 6.3 x 0.8 mm according to DIN 46244 connectors 3611, 3615, 3623, 3626, 3647, connectors acc. to RAST 5 standard Reglette a prises femelles 4,0 N Force d'insertion/contact2 1,0 N Force de separation/contact2 Force d'expression/contact du corps isolant 4,0 N reglettes a couteaux 3618, 3647, Raccordement avec reglettes a couteaux suivant standard RAST 5 Socket board 4.0 N Insertion force/contact2 1.0 N Withdrawal force/contact2 Expression force/contact from body 4.0 N Mating with tab headers 3618, 3647, tab headers acc. to RAST 5 standard stranded wire LiY 0.75 mm2 according to H05V-K Conductor bridge 6,3 x 0,8 mm suivant DIN 42644 connecteurs 3611, 3615, 3623, 3626, 3647, connecteurs suivant standard RAST 5 fil multibrin LiY 0,75 mm2 suivant H05V-K 4. Caracteristiques electriques (a Tamb 20 C) Conducteur de pontage 4. Electrical data (at Tamb 20 C) 5 m 10 A at Tamb 70 C 250 V AC IIIa (CTI 350) 4.0 mm 4.0 mm > 10 G Contact resistance Rated current Rated voltage3 Material group3 Creepage distance Clearance Insulation resistance 1 2 3 component glow wire resistant (GWT 750 C), testing acc. to IEC 60695-2-11, assessment acc. to IEC 60335-1 (flame < 2 s) measured with a polished flat steel pin, nominal thickness 0.8 mm according to DIN EN 60664/IEC 60664 Resistance de contact Courant assigne Tension assignee3 Groupe de materiau3 Distance d'isolement Ligne de fuite Resistance d'isolement 1 2 3 Messerkontakttypen types of tab contacts types de contacts a couteau Buchsenkontakttypen types of socket contacts types de contacts femelles a g a b h b c i c d k d e l e f m f www.lumberg.com 5 m 10 A a Tamb 70 C 250 V AC IIIa (CTI 350) 4,0 mm 4,0 mm > 10 G composant resistant a fil incandescant (GWT 750 C), essai suivant CEI 60695-2-11, evaluation suivant CEI 60335-1 (flamme < 2 s) mesuree avec une tige plate d'acier poli, epaisseur nominale 0,8 mm suivant DIN EN 60664/CEI 60664 Bestellbezeichnung* Designation* Designation* Polzahl Poles Poles 3680 2-25 * Die Bestellbezeichnung wird projektbezogen erganzt. A project-specific suffix to the designation will be assigned. Un suffixe specifique au projet sera ajoute a la designation. Verpackung: im Karton Packaging: in a cardboard box Emballage: dans un carton Die Messer- und Buchsenleisten 367... und 368... bilden ein frei konfigurierbares Steckverbindersystem. Die gezeigten Abbildungen sind Beispiele. Neben der Kodierung nach RAST-5-Standard (vgl. Umschlaginnenseite und Seite 5.84) sind die Zwischenwande und -raume sowie die Positionen der gebruckten Null- und Schutzleiterkontakte frei wahlbar. The tab headers and socket boards 367... and 368... make up a connector system free to configure. The given illustrations are examples. Besides keying according to RAST 5 standard (see inner cover and page 5.84) the partitions and the positions of the bridged neutral and protective conductor contacts are free to choose. Les reglettes a couteaux et prises femelles 367... et 368... forment un systeme de connecteurs configurable a libre choix. Les images montrent des exemples. Outre le codage suivant le standard RAST 5 (voir au cote interieur de la couverture a la page 5.84) les separations et les positions des contacts des conducteurs neutre et de protection pontes sont a libre choix. 11/2012