||||||||| | | | | | |
HWZT-RS
• Clock oscillation for microcontrollers
• Telephones
• Household electric appliances
• Low resonant impedance
• Small size, Light weight.
• Low cost timing solution .
LOW PROFILE LEADED CERAMIC RESONATOR
STANDARD SPECIFICATIONS:
APPLICATIONS:
FEATURES:
TEST CONDITION AND TEST CIRCUIT:
OPTIONS & PART IDENTIFICATION:
Parameters Minimum Typical Maximum Units Notes
Frequency Range 8.00 12.50 MHz
Resonant Impedance (Ro) 25 Ω
Frequency Tolerance -0.5 +0.5 %
Frequency Stability -0.3 +0.3 % -25ºC to +85ºC
Withstanding Voltage 100 Vdc 5 secs
Rating Voltage D.C. Voltage 6 Vdc
A.C. Voltage 15 Vp-p.
Load Capacitance 24 30 36 pF
Insulation Resistance 500 MΩ 10Vdc, 1min
Operation Temperature -25 +85 ºC
Storage Temperature -40 +85 ºC
Aging Rate (Fosc) -0.3 0.3 % From initial value
X: Ceramic Resonator
C1=C2=30pF±20%
Parts shall be measured under a condition (Temp.:
20±15°C, Humidity: 65±20% R.H.) unless the standard
condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is
regulated to measure
HWZT - RS -
Frequency
Frequency in MHz
Packaging
Blank: Bulk
A: AMMO package*
*AMMO package
lead length 13.5mm
5.5 x 3.0 x 5.0mm
HWZT-RS
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
5101 Hidden Creek Lane Spicewood
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale please visit:
www.abracon.com
ABRACON IS
ISO9001-2008
CERTIFIED
REVISED: 03.01.2017
LL
C
|||||||||| | | | | |
HWZT-RS
LOW PROFILE LEADED CERAMIC RESONATOR
OUTLINE DRAWING:
Dimension: mm
Bulk Pack AMMO Pack
ATTENTION: Abracon LLC products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon is required. Please contact Abracon for more information.
5.5 x 3.0 x 5.0mm
HWZT-RS
CAUTION
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as
this will cause damage to the component.
(2) This component is not hermetically sealed. Do not clean or wash the component.
(3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering.
(4) Do not expose the component to open flame.
(5) This specification applies to the functionality of the component as a single unit.
(6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that
customers confirm the solderability and characteristics for the product prior to use.
(7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-
reliability life dependant applications. ContactAbracon Corporation prior to using this product when in doubt.,
Packaging:
Bulk: 500pcs/plastic bag
AMMO: 2000pcs/box
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod-
uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according
to MSL 1 requirements to maintain solderability.
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
ABRACON IS
ISO9001-2008
CERTIFIED
REVISED: 03.01.2017
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale please visit:
www.abracon.com
LL
C
