MOC3060, MOC3061, MOC3062, MOC3063 OPTICALLY COUPLED BILATERAL SWITCH LIGHT ACTIVATED ZERO VOLTAGE CROSSING TRIAC Dimensions in mm 2.54 DESCRIPTION The MOC306_ Series are optically coupled isolators consisting of a Gallium Arsenide infrared emitting diode coupled with a monolithic silicon detector performing the functions of a zero crossing bilateral triac mounted in a standard 6 pin dual-in-line package. 7.0 6.0 1 2 6 5 3 4 1.2 7.62 6.62 7.62 4.0 3.0 FEATURES l l l l l l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. High Isolation Voltage (5.3kVRMS ,7.5kVPK ) Zero Voltage Crossing 600V Peak Blocking Voltage All electrical parameters 100% tested Custom electrical selections available APPLICATIONS l CRTs l Power Triac Driver l Motors l Consumer appliances l Printers 13 Max 0.5 3.0 0.5 3.35 0.26 ABSOLUTE MAXIMUM RATINGS (25 C unless otherwise noted) Storage Temperature -400C Operating Temperature -400C Lead Soldering Temperature (1.6mm from case for 10 seconds) Input-to-output Isolation Voltage (Pk) (60 Hz , 1sec. duration) - +1500C - +1000C 2600C 7500 Vac INPUT DIODE Forward Current 50mA Reverse Voltage 6V Power Dissipation 120mW (derate linearly 1.41mW/0C above 250C) OUTPUT PHOTO TRIAC OPTION SM OPTION G SURFACE MOUNT 7.62 0.6 0.1 10.46 9.86 1.25 0.75 POWER DISSIPATION 0.26 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, TS25 1YD England Tel: (01429)863609 Fax : (01429) 863581 e-mail sales@isocom.co.uk http://www.isocom.com 19/12/01 Off-State Output Terminal Voltage 600V RMS Forward Current 100mA Forward Current (Peak) 1.2A Power Dissipation 150mW (derate linearly 1.76mW/0C above 250C) Total Power Dissipation 250mW (derate linearly 2.94mW/0C above 250C) ISOCOM INC 1024 S. Greenville Ave, Suite 240, Allen, TX 75002 USA Tel: (214) 495-0755 Fax: (214) 495-0901 e-mail info@isocom.com http://www.isocom.com DB91051m-AAS/A4 ELECTRICAL CHARACTERISTICS ( TA = 25C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Reverse Current (IR) Output Peak Off-state Current ( IDRM ) Peak Blocking Voltage ( VDRM ) On-state Voltage ( VTM ) Critical rate of rise of off-state Voltage ( dv/dt ) Coupled 1.2 1.8 TEST CONDITION 1.5 100 V A IF = 30mA VR = 6V 300 nA V V VDRM = 600V (note 1 ) IDRM = 300nA ITM = 100mA ( peak ) 600 3.0 V/s 100 Input Current to Trigger ( IFT )(note 2 ) MOC3060 MOC3061 MOC3062 MOC3063 Holding Current , either direction ( IH ) Input to Output Isolation Voltage VISO Zero Crossing Charact-eristic MIN TYP MAX UNITS 30 15 10 5 mA mA mA mA A VRMS VPK 100 5300 7500 Inhibit Voltage ( VIH ) 35 V Leakage in Inhibited State ( IS ) 500 A VTM = 3V ( note 2 ) See note 3 See note 3 IF= Rated IFT MT1-MT2 Voltage above which device will not trigger IF= Rated IFT VDRM = 600V off-state Note 1. Test voltage must be applied within dv/dt rating. Note 2. Guaranteed to trigger at an IF value less than or equal to max. IFT , recommended IF lies between Rated IFT and absolute max. IF . Note 3. Measured with input leads shorted together and output leads shorted together. 19/12/01 DB91051m-AAS/A4 0.1 0.05 0 -30 0 25 50 75 100 125 Normalised repetitive peak off-state voltage ( V ) RMS on-state current I T (Arms) RMS On-state Current vs. Ambient Temperature 0.8 Normalised to TA = 25C 0.6 0.4 0.2 0 -30 0 25 50 75 100 On-state Voltage vs. Ambient Temperature 2.8 2.4 On-state voltage V TM (V) Forward current I F (mA) 1.0 Forward Current vs. Ambient Temperature 40 30 20 10 2.0 1.6 1.2 0.8 0.4 0 0 -30 0 25 50 75 100 -30 125 0 25 50 75 100 Ambient temperature TA ( C ) Ambient temperature TA ( C ) Normalised Input Trigger Current vs. Ambient Temperature On-state Current vs. On-state Voltage 1.4 100 FT ) 1.2 Ambient temperature TA ( C ) 50 1.2 On-state current I TM (mA) Normalised input trigger current ( I 1.4 Ambient temperature TA ( C ) 60 1.0 0.8 Normalised to TA = 25C 0.6 0.4 0.2 0 80 60 IF = 20mA TA = 25C 40 20 0 -30 0 25 50 75 Ambient temperature TA ( C ) 19/12/01 Normalised Repetitive Peak Off-state Voltage vs. Ambient Temperature 100 0 0.4 0.8 1.2 1.6 2.0 On-state voltage VTM (V) DB91051m-AAS/A4