2SK192A TOSHIBA Field Effect Transistor Silicon N Channel Junction Type 2SK192A FM Tuner Applications VHF Band Amplifier Applications Unit: mm * High power gain: GPS = 24dB (typ.) (f = 100 MHz) * Low noise figure: NF = 1.8dB (typ.) (f = 100 MHz) * High forward transfer admittance: |Yfs| = 7 mS (typ.) (f = 1 kHz) Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit VGDO -18 V Gate current IG 10 mA Drain power dissipation PD 200 mW Junction temperature Tj 125 C Tstg -55~125 C Gate-drain voltage Storage temperature range JEDEC JEITA TOSHIBA Weight: 0.13 g (typ.) Electrical Characteristics (Ta = 25C) Characteristics Gate leakage current Gate-drain breakdown voltage Drain current Symbol IGSS V (BR) GDO IDSS (Note) 2-4E1D Test Condition Min Typ. Max Unit 3/4 3/4 -10 nA -18 3/4 3/4 V VGS = 0, VDS = 10 V 3 3/4 24 mA VDS = 10 V, ID = 1 mA -1.2 -3 3/4 V VGS = -1.0 V, VDS = 0 IG = -100 mA Gate-source cut-off voltage VGS (OFF) Forward transfer admittance iYfsi VGS = 0, VDS = 10 V, f = 1 kHz 3/4 7 3/4 mS Input capacitance Ciss VDS = 10 V, VGS = 0, f = 1 MHz 3/4 3.5 3/4 pF Reverse transfer capacitance Crss VGD = -10 V, f = 1 MHz 3/4 3/4 0.65 pF Power gain GPS VDD = 10 V, f = 100 MHz (Figure 1) 3/4 24 3/4 dB Noise figure NF VDD = 10 V, f = 100 MHz (Figure 1) 3/4 1.8 3.5 dB Note: IDSS classification Y: 3.0~7.0, GR: 6.0~14.0, BL: 12.0~24.0 1 2003-04-04 2SK192A L1: 0.8 mmf Ag plated Cu wire 3 turns, 10 mm ID, 10 mm length L2: 0.8 mmf Ag plated Cu wire 3.5 turns, 10 mm ID, 10 mm length Figure 1 100 MHz Gps, NF Test Circuit 2 2003-04-04 2SK192A 3 2003-04-04 2SK192A 4 2003-04-04 2SK192A 5 2003-04-04 2SK192A RESTRICTIONS ON PRODUCT USE 000707EAA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2003-04-04