1
Voltage Selector SWP
https://www.schurter.com /PG04
Fuses
Voltage selector switch, 6 stages, step switch, panel mounting
Approvals and Compliances
Description
- Voltage Selector , 6 stages
- Step switch
- Solder terminals
Technical Data
Ratings IEC: 6.3 A / 250 VAC; 50 Hz
␣ UL: 10 A / 250 VAC; 60 Hz
␣ CSA: 8 A / 250 VAC; 60 Hz
Mounting Panel Mount from front side
Fastening Screw-on mounting
Terminal Solder
Number of Stages 6
Lifetime 300 operating cycles (without load)
Degree of Protection IP 40
Allowable Operation Tempe-
rature
-40 °C to 85 °C
Climatic Category 25/85/21 acc. to IEC 60068-1
Material: Socket Thermoplastic, black, UL 94V-0
Weight 16.5 g
Solderability 350 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Insulation Resistance > 10'000MΩ (500VDC; 1min)
Contact Resistance < 10 mΩ at 20 mV
Dielectric Strength > 2.5kVAC between L-N
> 4kVAC between L/N-PE
(1min; 50Hz)
Clearance and Creepage Di-
stance
> 5mm
> 8mm between L/N-PE
Resistance to Vibration acc. to IEC 60068-2-6, test Fc
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: SWP
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40040798
UL Approvals UL UL File Number: NRNT2&8.E72661
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to UL 508 Industrial control equipment
Designed according to CSA C22.2 no. 14 Fuseholder general requirements