ATC 700 E Series NPO
Porcelain High RF Power
Multilayer Capacitors
• Case E Size • Capacitance Range
(.380" x .380") 1 pF to 2200 pF
• High Q • Ultra-Stable NPO Performance
• Low ESR/ESL • High RF Current/Voltage
• High RF Power • High Reliability
• Extended WVDC • Available with
up to 7200 VDC Encapsulation Option*
ATC, the industry leader, offers new improved ESR/ESL performance
for the 700 E Series RF Capacitors. This high Q multilayer capacitor
is ultra-stable under high RF current and voltage applications with
NPO performance. High density porcelain construction provides a
rugged, hermetic package.
ATC offers an encapsulation option for applications requiring ex-
tended protection agains arc-over and corona.
Typical functional applications: Bypass, Coupling, Tuning, Imped-
ance Matching and DC Blocking.
Typical circuit applications: HF/RF Power Amplifiers, Transmitters,
Antenna Tuning, Plasma Chambers and Medical (MRI coils).
*For leaded styles only
ENVIRONMENTAL TESTS
ATC 700 E Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681
and MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
MIL-STD-202, Method 106.
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative hu-
midity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q):
Greater than 10,000 (1 pF to 1000 pF) @ 1 MHz.
Greater than 10,000 (1100 pF to 2200 pF) @ 1 KHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
1 pF to 2200 pF:
105Megohms min. @ +25°C at 500 VDC.
104Megohms min. @ +125°C at 500 VDC.
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2.
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
120% of WVDC forÏ capacitors rated above 1250 volts DC for 5 seconds.
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater.
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure).
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater.
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage).
TERMINATION STYLES:
Available in various surface mount and leaded styles.
See Mechanical Configurations, page 3.
TERMINAL STRENGTH: Terminations for chips and pellets
withstand a pull of 10 lbs. min., 25 lbs. typical, for 5 seconds in
direction perpendicular to the termination surface of the capac-
itor. Test per MIL-STD-202, method 211.
ATC # 001-943 Rev. K 6/13
ATC 700 E Capacitance Values
The above part number refers to a 700 E Series (case size E) 390 pF capacitor,
K tolerance (±10%), 3600 WVDC, with W termination (Tin/Lead, Solder Plated over Nickel Barrier), laser marking and Waffle-packaging.
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
ATC accepts orders for our parts using designations with or without the
“ATC” prefix. Both methods of defining the part number are equivalent,
i.e., part numbers referenced with the “ATC” prefix are interchangeable to
parts referenced without the “ATC” prefix. Customers are free to use either
in specifying or procuring parts from American Technical Ceramics.
2
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
VRMS = 0.707 x WVDC
• SPECIAL VALUES, TOLERANCES, MATCHING, AND CAPACITOR ASSEMBLIES ARE AVAILABLE.
• ATC’S CUSTOM POWER CAPACITOR ASSEMBLY CATALOG, ATC # 001-900 LISTS ASSEMBLY OPTIONS.
• EXTENDED WORKING VOLTAGES ARE AVAILABLE FOR COMMERCIAL ORDERS ONLY.
• ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
ATC PART NUMBER CODE
ATC700 E 39 1 K W 3600 X C
Series
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point Laser Marking
Indicates number of zeros following digits WVDC
of capacitance in picofarads except for decimal values.
Termination Code
Capacitance Tolerance
CAPACITANCE TOLERANCE
Code CDJKM
Tol. ±0.25 pF ±0.5 pF ±5%
G
±2% ±10% ±20%
Packaging
C - ATC Matrix Tray (Standard)
T - Tape and Reel, 250 pc. qty.
I - Special Packaging. Consult Factory
CAP.
CODE
CAP.
(pF) TOL. RATED WVDC CAP.
CODE
CAP.
(pF) TOL. RATED WVDC CAP.
CODE
CAP.
(pF) TOL. RATED WVDC CAP.
CODE
CAP.
(pF) TOL. RATED WVDC
STD. EXT. STD. EXT. STD. EXT. STD. EXT.
1R0 1.0
B, C, D 3600 7200
5R1 5.1 390 39 271 270
1R1 1.1 5R6 5.6 430 43 301 300
1R2 1.2 6R2 6.2 470 47 331 330 3600
1R3 1.3 6R8 6.8 B, C, D 510 51 361 360
1R4 1.4 7R5 7.5 560 56 391 390
1R5 1.5 8R2 8.2 620 62 7200 431 430
1R6 1.6 9R1 9.1 680 68 471 470
1R7 1.7 100 10 750 75 511 510
1R8 1.8 110 11820 82561 560 2500
1R9 1.9 120 12 910 91 G, J, 621 620 G, J,
2R0 2.0 130 13 3600 7200 101 100 K, M 3600 681 680 K, M N/A
2R1 2.1 150 15 111 110 751 750
2R2 2.2 160 16 121 120 821 820
2R4 2.4 180 18 G, J 131 130 5000 911 910
2R7 2.7 200 20 K, M 151 150 102 1000
3R0 3.0 220 22 161 160 112 1100 1000
3R3 3.3 240 24 181 180 122 1200
3R6 3.6 270 27 201 200 152 1500
3R9 3.9 300 30 221 220 N/A 182 1800
4R3 4.3 330 33 241 240 222 2200
4R7 4.7 360 36
EXTENDED VOLTAGEEXTENDED VOLTAGE
EXTENDED VOLTAGE
EXTENDED VOLTAGE
EXTENDED VOLTAGE
EXT. VOLT.
B
±0.1 pF
ATC 700 E Capacitors: Mechanical Configurations
3
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
CASE SIZE
& TYPECASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIALS
700E W E
Solder Plate
LT
W
Y
.380
+.015 -.010
(9.65
+0.38
-0.25)
.380 ±.010
(9.65 ±0.25)
.170 (4.32)
max.
.040 (1.02)
max.
Tin/Lead, Solder Plated over
Nickel Barrier Termination
700E P
E
Pellet
LT
W
Y
.380
+.040 -.010
(9.65
+1.02
-0.25)
Heavy Tin/Lead Coated,
over Nickel Barrier
Termination
700E T E
Solderable Nickel
Barrier
LT
W
Y
.380
+.015 -.010
(9.65
+0.38
-0.25)
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
700E CA E
Gold Chip
LT
W
Y
.380
+.015 -.010
(9.65
+0.38
-0.25)
RoHS Compliant
Gold Plated over
Nickel Barrier Termination
700E MS
E
Microstrip
LT
LL
WL
TL
W
.380
+.035 -.010
(9.65
+0.89
-0.25)
N/A
High Purity
Silver Leads
LL= .750 (19.05) min.
WL= .350 ±.010
(8.89 ±0.25)
TL= .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
700E AR
E
Axial Ribbon
LT
LL
WL
TL
W
700E AW
E
Axial Wire
LT
LL
W•
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL= 2.25 (57.2) min.
700E RW
E
Radial Wire
L
T
W
LL
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL= 1.0 (25.4) min.
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
ATC 700 E Capacitors: Non-Magnetic Mechanical Configurations
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
4
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
Normal
High Density
.185
.165
.050
.030
.325
.325 .385
.425
A Min. B Min. C Min. D Min.
Pad Size
Normal
High Density
.405
.385
.050
.030
.325
.325 .385
.425
Vertical Mount
Horizontal Mount
Case E
Vertical
Electrode Orientation
Horizontal
Electrode Orientation
B
AC
D
B
391K
391K
W
T
W
L
L
T
Suggested Mounting Pad Dimensions
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
CASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIALS
700E WN E
Non-Mag
Solder Plate
LT
W
Y
.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.015 -.010
(9.65
+0.38
-0.25)
.170 (4.32)
max.
.040 (1.02)
max.
Tin/Lead, Solder Plated over
Non-Magnetic Barrier
Termination
700E PN E
Non-Mag
Pellet
LT
W
Y
.380
+.040 -.010
(9.65
+1.02
-0.25)
Heavy Tin/Lead Coated, over
Non-Magnetic Barrier
Termination
700E TN E
Non-Mag
Solderable Barrier
LT
W
Y
.380
+.015 -.010
(9.65
+0.38
-0.25)
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier
Termination
700E MN
EE
Non-Mag
Microstrip
LT
LL
WL
TL
W
.380
+.035 -.010
(9.65
+0.89
-0.25
N/A
High Purity
Silver Leads
LL= .750 (19.05) min.
WL= .350 ±.010
(8.89 ±0.25)
TL= .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
700E AN
Non-Mag
Axial Ribbon
LT
LL
WL
TL
W
700E BN
E
Non-Mag
Axial Wire
LT
LL
W•
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL= 2.25 (57.2) min.
700E RN E
Non-Mag
Radial Wire
L
T
W
LL
Silver-plated Copper Leads
Dia. = .032 ±.002
(.813 ±.051)
LL= 1.0 (25.4) min
ATC North America
+1-631-622-4700 • sales@atceramics.com
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
E
ATC 700 E Performance Data
CAPACITANCE (pF)
(1.0 pF to 400 pF)
Q
ESR VS. CAPACITANCE
ATC SERIES 700, CASE E
CAPACITANCE (pF)
(430 pF to 2200 pF)
CAPACITANCE (pF)
(430 pF to 2200 pF)
5
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
+1-631-622-4700 • sales@atceramics.com
ATC Europe
+46 8 6800410 • sales@atceramics-europe.com
ATC Asia
+86-755-2396-8759 • sales@atceramics-asia.com
0.01
0.1
1
110 100 1000
C
30 MHz
(Typical)
30 MHz
(Typical)
0.001
0.01
0.1
100 1000 10000
C
( )
30 MHz
(Typical)
, CASE E
10
100
1000
100 1000 10000
C
Q
30MHz
(Typical)
ESR (Ohms)
Q
CAPACITANCE (pF)
(1.0 pF to 400 pF)
ESR VS. CAPACITANCE
ATC SERIES 700, CASE E
Q VS. CAPACITANCE
ATC SERIES 700, CASE E
Q VS. CAPACITANCE
ATC SERIES 700, CASE E
ESR (Ohms)
ATC 700 E Performance Data
ATC SERIES 700, CASE E
0.1
1
10
100
1101001000
CAPACITANCE
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
The current rating is based on an 65° C mounting
surface with a device thermal resistance of
12° C/W. A power dissipation of 5 W will result
in a case temperature of 125° C.
10 MHz
2 MHz
30 MHz
ATC SERIES 700, CASE E
1
10
100
100 1000 10000
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
10 MHz
2 MHz
The current rating is based on an 65° C mounting
surface with a device thermal resistance of
12° C/W. A power dissipation of 5 W will result
in a case temperature of 125° C.
30 MHz
0.1
1
10
100
1 10 100 1000
C
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
30 MHz
10 MHz
The current rating is based on an 65° C mounting
surface with a device thermal resistance of
12° C/W. A power dissipation of 5 W will result in
a case temperature of 125° C.
2 MHz
10
100
1000
10000
110 100 1000 10000
C
(Typical)
TCC= 0 ± 30 PPM/°C
TEMPERATURE (Degrees C)
1
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
0.8
-55 -35 -15 5 25 45 65 85 105 125
SERIES RESONANCE VS. CAPACITANCE
ATC SERIES 700, CASE E
CAPACITANCE CHANGE VS. TEMPERATURE
ATC SERIES 700, CASE E
CAPACITANCE (pF) TEMPERATURE (Degrees C)
FREQUENCY (MHz)
% CHANGE IN CAPACITANCE
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE E
CAPACITANCE (pF)
(1.0 pF to 400 pF)
RMS CURRENT (Amps)
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE E, EXTENDED VOLTAGE
CAPACITANCE (pF)
(1.0 pF to 180 pF)
RMS CURRENT (Amps)
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE E
CAPACITANCE (pF)
(430 pF to 2200 pF)
RMS CURRENT (Amps)
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC
document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at
www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights
of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 1996 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-943 Rev. K 6/13