MCB1700 Evaluation Board
MCB1750 Evaluation Board
The Keil MCB1750 Evaluation Board introduces the new NXP LPC1750 family of
ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this
advanced architecture. The MCB1750 has a wide range of interfaces making it a great starting point for
your next Cortex-M3 project.
MCB1750 Features
100MHz LPC1758 ARM Cortex™-M3 processor-based MCU in 80-pin LQFP
On-Chip Memory: 512KB Flash & 64KB RAM
Color QVGA TFT LCD
10/100 Ethernet Port
USB 2.0 Full Speed - USB, USB-OTG, & USB Host
2 CAN Interfaces
2 Serial Ports
SD/MMC Card Interface
5-position Joystick and push-button
Analog Voltage Control for ADC Input
Amplifier and Speaker
52 GPIO pins
Debug Interface Connectors
20 pin JTAG (0.1 inch connector)
10 pin Cortex debug (0.05 inch connector)
20-pin Cortex debug + ETM Trace (0.05 inch connector)
System Requirements
PC with one available USB port
Windows 2000, XP and Vista
One CD-ROM drive
ULINK family USB-JTAG Adapter for high-performance Debug/Download (optional)
Starter Kit
The MCB1750 is also available as a starter kit which includes the ULINK-ME USB-JTAG adapter.
Part numbers are:
MCB1750: MCB1750 Only
MCB1750UME: MCB1750 and ULINK-ME
Evaluation Software
The MCB1750 Evaluation Board and Starter Kit include the MDK-ARM Evaluation Tools. These tools
help you get started writing programs and testing the microcontroller and its capabilities. Sample
applications that run on the MCB1750 are included.
