100W Constant Power Mode LED Driver 110 M M SELV Features *Wide input range 100~305VAC( Class) *Full power output at 70~100% Constant power mode operation *Metal case with IP67, suitable for outdoor application *LVLE (H type/24V) Class 2 (24V) power unit *Surge protection with 6KV/4KV (10KV/6KV optional) *3 in 1 dimming function (Dim to off and Isolation design) *India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours *Protection functions: OVP/SCP/OCP/OTP *Life time >50,000 hrs. and 5 years warranty XLG-100 Type HL series Note.12 Applications *Skyscraper lighting *Street lighting *Floodlight Lighting *Stage lighting *Fishing lighting *Horticulture lighting *Bay lighting *DMX power supply *Type HL for use in class, Division 2 Description XLG -100 series is a 100W LED AC / DC driver featuring the constant power mode. XLG -100 operates from 100~305 VAC and offers models with different rated current ranging between 700mA and 8000mA. Thanks to the high efficiency up to 92% , with the fanless design, the entire series is able to operate for -40 ~+90 case temperature under free air convection. The design of metal housing and IP 67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LED s for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG -100series comply with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation. Model Encoding XLG - 100 I - L Function options Rated output voltage(12/24V or L/H types) I: for India version :For standard version Rated wattage Series name Type Blank A AB Function Io and Vo fixed. (For harsh environment) Io adjustable via built-in potentiometer Io adjustable via built-in potentiometer +3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Note By request In Stock In Stock Note: 12V and 24V models without the AB type File Name:XLG-100-SPEC 2019-04-09 XLG-100 100W Constant Power Mode LED Driver series SPECIFICATION MODEL DC VOLTAGE XLG-100-12- XLG-100-24- 12V 24V CONSTANT CURRENT REGION Note.2 8.4~ 12V RATED CURRENT 8A 96W RATED POWER RIPPLE & NOISE (max.) Note.3 150mVp-p Adjustable for A/AB-Type only (via the built-in potentiometer) CURRENT ADJ RANGE OUTPUT VOLTAGE TOLERANCE Note.4 4 ~ 8A 3.0% 2~4A 2.0% LINE REGULATION 0.5% 0.5% LOAD REGULATION SETUP, RISE TIME Note.6 2% 1% 500ms, 100ms/230VAC, 1200ms, 100ms/115VAC HOLD UP TIME (Typ.) 12ms/ 230VAC 12ms/ 115VAC VOLTAGE RANGE Note.5 FREQUENCY RANGE INPUT POWER FACTOR TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) AC CURRENT 47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load THD< 10%(@load50%/115VC,230VAC; @load75%/277VAC) 92% 92% 1.1A / 115VAC 0.5A / 230VAC 0.42A/277VAC COLD START 50A(twidth=300s measured at 50% Ipeak) at 230VAC; Per NEMA 410 LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD POWER CONSUMPTION No load power consumption <0.5W(for standard version) SHORT CIRCUIT PROTECTION OVER VOLTAGE INPUT OVER VOLTAGE Note.7 OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 8units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC 95 ~ 108% Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed 13.5 ~ 18V 27 ~ 34V Shut down output voltage, re-power on to recover 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage) can survive input voltage stress of 440Vac for 48 hours Hiccup mode, recovers automatically after fault condition is removed Tcase=-40 ~ +90 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) Tcase=+90 20 ~ 95% RH non-condensing -40 ~ +90, 10 ~ 95% RH 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750(type"HL"), UL879, CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; EAC TP TC 004; IP67 approved WITHSTAND VOLTAGE I/P-O/P:4.2KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION EMC SAFETY & I/P-FG:2.1KVAC O/P-FG:1.5KVAC Parameter Standard Test Level/Note Conducted EN55015(CISPR15) ----- Radiated EN55015(CISPR15) ----- Harmonic Current EN61000-3-2 Class C @load50% Voltage Flicker EN61000-3-3 ----- Parameter Standard Test Level/Note ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT/Burst EN61000-4-4 Level 3 Surge EN61000-4-5 4KV/Line-Line 6KV/Line-Earth(6K/10K option) Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 Voltage Dips and Interruptions EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods EN61547 EMC IMMUNITY MTBF NOTE 100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER OVER CURRENT OTHERS 16.8~ 24V 4A 96W 240mVp-p DIMENSION PACKING 1006.16K hrs min. Telcordia SR-332 (Bellcore) ; 140*63*32mm (L*W*H) 0.58Kg;24pcs /15Kg /0.85CUFT 276.37Khrs min. MIL-HDBK-217F (25) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7. Only for XLG-100 I series 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less. 12.Products sourced from the Americas regions may not have the PSE/CCC/BIS/KC logo. Please contact your MEAN WELL sales for more information. 13.For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:XLG-100-SPEC 2019-04-09 XLG-100 100W C onstant Power Mode LED Driver series SPECIFICATION XLG-100-L- XLG-100-H- RATED CURRENT 700mA 2100mA RATED POWER CONSTANT CURRENT REGION 100W 71 ~ 142V 100W 27 ~ 56V MODEL OUTPUT FULL POWER CURRENT RANGE 700~1050mA 1750~2780mA OPEN CIRCUIT VOLTAGE (max.) 149V 60V CURRENT ADJ. RANGE 350~1050mA CURRENT RIPPLE CURRENT TOLERANCE 3.0%(@rated current) 5% SET UP TIME 500ms/230 VAC , 1200ms/115 VAC VOLTAGE RANGE INPUT 100 ~ 305VAC 142VDC ~ 431VDC Note.5 (Please refer to "STATIC CHARACTERISTIC" ang " DRIVING METHODS OF LED MODULE"section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF0.97 / 115VAC, PF0.95 / 230VAC, PF0.92 / 277VAC at full load (Please refer to "Power Factor Characteristic" section) TOTAL HARMONIC DISTORTION THD < 10% (@ load50% at 115 VAC /230 VAC ,@load75% at 277 VAC ) Please refer to " TOTAL HARMONIC DISTORTION ( THD )" section EFFICIENCY (Typ.) 92.5% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 1.1A / 115VAC 0.5A / 230VAC 0.42A / 277VAC COLD START 50A(twidth=300s measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. NO. of PSUs on 16A CIRCUIT BREAKER 8 unit(circuit breaker of type B) / 14 units(circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC STANDBY POWER CONSUMPTION Standby power consumption <0.5W for AB-Type(Dimming OFF)(for standard version) OVER POWER SHORT CIRCUIT OVER VOLTAGE PROTECTION INPUT OVER VOLTAGE Note.7 OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY SAFETY & EMC 875~2780mA 91% 105 ~ 150% Hiccup mode, recovers automatically after fault condition is removed Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed 160 ~ 220V Shut down output voltage, re-power on to recover 66 ~ 90V 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage) can survive input voltage stress of 440Vac for 48 hours Hiccup mode, recovers automatically after fault condition is removed Tcase=-40 ~ +90(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) Tcase=+90 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750(type"HL"), UL879, CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; EAC TP TC 004; IP67 approved WITHSTAND VOLTAGE I/P-O/P:4.2 KVAC ISOLATION RESISTANCE I/P-O/P, I/P- FG , O/P- FG :100M Ohms / 500 VDC / 25/ 70% RH EMC EMISSION I/P- FG :2.1 KVAC O/P- FG :1.5 KVAC Parameter Standard Test Level/Note Conducted EN55015(CISPR15) ----- Radiated EN55015(CISPR15) ----- Harmonic Current EN61000-3-2 Class C @load50% Voltage Flicker EN61000-3-3 ----- Parameter Standard Test Level/Note ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT/Burst EN61000-4-4 Level 3 Surge EN61000-4-5 4KV/Line-Line 6KV/Line-Earth(6K/10K option) Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 Voltage Dips and Interruptions EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods EN61547 EMC IMMUNITY MTBF OTHERS NOTE DIMENSION 1006.16K hrs min. Telcordia SR-332 (Bellcore) ; 140*63*32mm (L*W*H) PACKING 0.58Kg;24pcs /15Kg /0.85CUFT 276.37Khrs min. MIL-HDBK-217F (25) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7.Only for XLG-100 I series 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less. 12. Products sourced from the Americas regions may not have the PSE/CCC/BIS/KC logo. Please contact your MEAN WELL sales for more information. 13. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:XLG-100-SPEC 2019-04-09 XLG-100 100W Constant Power Mode LED Driver series BLOCK DIAGRAM PFC fosc : 50~120KHz PWM fosc : 60~130KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM- O.C.P. (AB Type) FG O.L.P. DETECTION CIRCUIT PWM CONTROL PFC CONTROL O.T.P. O.V.P. DRIVING METHODS OF LED MODULE I - V Operating Area XLG-100-H XLG-100-L 60V 150V 350mA, 142V 140V 700mA, 142V 875mA,56V 55V 130V 1750mA,56V 50V 120V 45V 110V 2780mA,36V 40V 100V 1050mA, 95V 90V 35V 30V 80V 700mA, 71V 70V 1050mA, 71V 60V 25V 1750mA,27V 2800mA,27V 20V 0mA 200mA 400mA 600mA 800mA 1000mA 1200mA Recommend Performance Region 0mA 500mA 1000mA 1500mA 2000mA 2500mA 3000mA Recommend Performance Region XLG-100-12,24 This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. Vo(%) 100 (B) Constant Current area (A) Constant V oltage area 60 (min.) (C) Hiccup Protection 50 100 In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please please contact MEAN WELL. Io(%) Typical output current normalized by rated current (%) File Name:XLG-100-SPEC 2019-04-09 XLG-100 100W Constant Power Mode LED Driver series DIMMING OPERATION AC/N(Blue) AC/L(Brown) FG(Green/Yellow) Vo-(Black) Vo+(Red) XLG-100 DIM+( Blue ) DIM-(White) 3 in 1 dimming function (for AB-Type) *Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. *Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. *Dimming source current from power supply: 100A (typ.) Applying additive 0 ~ 10VDC 100% 90% Vo- + + - - DIM+ + Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% Vo- + + - - DIM+ Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input Applying additive resistance: 100% 90% Vo- + 80% + - - DIM+ Additive Resistance Output current (%) Vo+ 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to Vo-" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%. 2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:XLG-100-SPEC 2019-04-09 XLG-100 100W Constant Power Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 230VAC 100 100 80 80 230VAC Input only 100VAC 60 LOAD (%) 60 LOAD (%) 230VAC Input only 40 20 -40 -30 -10 0 15 30 60 50 40 20 -40 70 (HORIZONTAL) -30 0 10 30 AMBIENT TEMPERATURE,Ta () 50 70 90 (HORIZONTAL) Tcase () If XLG-100 operates in Constant Power mode with the rated current the maximum workable Ta is 60 (Typ. 230VAC) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 75 Constant Current Mode 100 1 90 0.98 0.96 80 LOAD (%) 0.94 PF 70 0.92 277V 60 0.9 230V 50 0.88 115V 0.86 40 0.84 100 110 140 160 180 200 220 240 260 280 50% 305 60% 70% INPUT VOLTAGE (V) 60Hz 80% 90% 100% (300W) LOAD TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD XLG-100 series possess superior working efficiency that up to 92.5% can be reached in field applications. XLG-100-L Model, Tcase at 75 XLG-100-L Model, Tcase at 75 96 12% 11% 10% 9% 8% 7% 6% 5% 4% 3% 2% 1% 0% 92 THD 277V 230V 115V EFFICIENCY(%) 88 84 277V 80 230V 76 115V 72 68 64 60 50% 60% 70% 80% LOAD 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:XLG-100-SPEC 2019-04-09 100W Constant Power Mode LED Driver XLG-100 series LIFE TIME 120 LIFETIME(Kh) 100 80 60 40 20 0 25 30 35 40 45 50 55 60 65 65 70 75 80 85 90 Tcase( ) File Name:XLG-100-SPEC 2019-04-09 XLG-100 100W Constant Power Mode LED Driver MECHANICAL SPECIFICATION Case No.:275B series Unit:mm Blank-Type 140 134 125 30020 40 SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 tc Vo-(Black) Vo+(Red) 57 SJOW 17AWGx2C &05RN-F 2x1.0mm SJOW 14AWGx2C (for 12V) 24 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 63 30020 2 4- 4.5 : Max. Case Temperature 32 * tc Vo-(Black) Vo+(Red) Vo-(Black) Vo+(Red) A-Type 140 134 125 30020 40 SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 tc Vo-(Black) Vo+(Red) 57 SJOW 17AWGx2C &05RN-F 2x1.0mm SJOW 14AWGx2C (for 12V) 24 2 4- 4.5 : Max. Case Temperature 32 * tc Vo-(Black) Vo+(Red) 37.43 12.31 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 63 30020 Vo-(Black) Vo+(Red) File Name:XLG-100-SPEC 2019-04-09 XLG-100 100W Constant Power Mode LED Driver MECHANICAL SPECIFICATION Case No.:275B series Unit:mm AB-Type 140 134 125 30020 30020 40 Vo-(Black) Vo+(Red) SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 tc DIM+( Blue ) DIM-(White) 57 UL2517 20AWGx2C 24 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 63 SJOW 17AWGx2C &05RN-F 2x1.0mm 2 35020 4- 4.5 : Max. Case Temperature 32 * tc DIM+( Blue ) DIM-(White) 12.31 37.43 DIM-(White) DIM+( Blue ) Vo+(Red) Vo-(Black) INSTALLATION MANUAL File Name:XLG-100-SPEC 2019-04-10