100W Constant Power Mode LED Driver XLG-100 series
M M
110
SELV
Type HL
Note.12
Description
Features Applications
Model Encoding
XLG - 100
Rated wattage
Series name
AB
Type
A
L
Rated output voltage(12/24V or L/H types)
Function options
-
(0~10Vdc, 10V PWM signal and resistance)
In Stock
Function Note
In Stock
Io adjustable via built-in potentiometer
Io adjustable via built-in potentiometer +3 in 1 dimming function
I: for India version
:For standard version
I-
File Name:XLG-100-SPEC 2019-04-09
Blank By request
Io and Vo fixed. (For harsh environment)
Note.12
Note: 12V and 24V models without the typeAB
Skyscraper lighting
Street lighting
Floodlight Lighting
Stage lighting
Fishing lighting
Horticulture lighting
Bay lighting
DMX power supply
Type for use in class , Division 2HL
Wide input range 100~305V ( Class )AC
Full power output at 70~100% Constant power mode operation
Metal case with P67, suitable for outdoor applicationI
LVLE (H type/24V) Class 2 (24V) power unit
Surge protection with 6KV/4KV (10KV/6KV optional)
3 in 1 dimming function (Dim to off and Isolation design)
India ( ) version with Input Over Voltage ProtectionEESL can
survive input voltage stress of 440Vac for 48 hours
Protection functions: / / /OVP SCP OCP OTP
Life time >50,000 hrs. and 5 years warranty
XLG LED AC DC XLG-100 series is a 100W / driver featuring the constant power mode. -100 operates
from 100~305 and offers models with different rated current ranging between 700mA and 8000mA.VAC
Thanks to the high efficiency up to 92% , with the fanless design, the entire series is able to operate for
-40 ~+90 case temperature under free air convection. The design of metal housing and 67 ingressIP
℃℃
protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative
environment-adaptive capability allows this series to reliably light on the s for all kinds of applicationLED
environments in almost any spots that may install luminaires in the world. -100series complyLED XLG
with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The
output and dimming are also completely in accordance with the new regulations with isolation tocircuit
ensure the user and luminaire system during installation.safety of both
MODEL
OUTPUT
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR
EFFICIENCY (Typ.)
AC CURRENT
INPUT
INRUSH CURRENT(Typ.)
LEAKAGE CURRENT
EMC IMMUNITY
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
OVER TEMPERATURE
OVER VOLTAGE
500ms, 100ms/230VAC, 1200ms, 100ms/115VAC
12ms/ 230VAC 12ms/ 115VAC
47 ~ 63Hz
1.1A / 115VAC 0.5A / 230VAC 0.42A/277VAC
<0.75mA / 277VAC
20 ~ 95% RH non-condensing
-40 ~ + , 10 ~ 95% RH90
±℃ 0.03%/ (0 ~ 60 )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
ENVIRONMENT
EMC EMISSION
SAFETY &
EMC
PROTECTION
Hiccup mode, recovers automatically after fault condition is removed
Shut down output voltage, re-power on to recover
SHORT CIRCUIT
I/P-O/P:4.2KVAC I/P-FG:2.1KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
TOTAL HARMONIC DISTORTION
DC VOLTAGE
RATED CURRENT
RATED POWER
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME Note.6
HOLD UP TIME (Typ.)
RIPPLE & NOISE (max.) Note.3
VOLTAGE TOLERANCE
Note.4
CONSTANT CURRENT REGION
Note.2
OVER CURRENT
COLD START 50A(twidth= s measured at 50% Ipeak) at 230VAC300μ;Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER 8units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC
MAX. CASE TEMP. Tcase=+90
(Please refer to "STATIC CHARACTERISTIC" section)
100 ~ 305VAC 142 ~ 431VDC
95 ~ 108%
Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧
THD< 10%(@load 50%/115VC,230VAC; @load 75%/277VAC)≧≧
Tcase=-40 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE” section)
XLG-100-12-
12V
8A
150mVp-p
8.4~ 12V
96W
±3.0%
±0.5%
±2%
92%
13.5 ~ 18V
SAFETY STANDARDS UL8750 ENEC EN61347-1, EN61347-2-13 independent, EN62384(type”HL”), UL879, CSA C22.2 No. 250.13-12; ;
GB19510.1 GB19510.14,; EAC TP TC 004; IP67 approved
XLG-100-24-
24V
4A
240mVp-p
16.8~ 24V
96W
±2.0%
±0.5%
±1%
92%
27 ~ 34V
NO LOAD
POWER CONSUMPTION
No load power consumption <0.5W(for standard version)
INPUT OVER VOLTAGE
Note.7
320 ~ 390 (Shut down output voltage when the input voltage exceeds protection voltage)VAC
can survive input voltage stress of 440Vac for 48 hours
CURRENT ADJ RANGE
2~4A
Parameter
Conducted
Radiated
Harmonic Current
Voltage Flicker
EN61547
Parameter
ESD
Radiated
EFT/Burst
Surge
Conducted
Magnetic Field
Voltage Dips and Interruptions
Standard
EN61000-3-2
EN61000-3-3
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level/Note
-----
-----
Class C @load≥50%
-----
Test Level/Note
Level 3, 8KV air ; Level 2, 4KV contact
Level 3
Level 3
4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Level 3
Level 4
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
EN55015(CISPR15)
EN55015(CISPR15)
MTBF
DIMENSIONOTHERS
NOTE
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. Only for XLG-100 I series
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less.
12.Products sourced from the Americas regions may not have the PSE/CCC/BIS/KC logo. Please contact your MEAN WELL sales for more information.
13.For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
1006.16K hrs min. Telcordia SR-332 (Bellcore) ; 276.37Khrs min. MIL-HDBK-217F (25 )
140 63**32mm (L*W*H)
0.58Kg;24pcs /15Kg /0.85CUFT
SPECIFICATION
File Name:XLG-100-SPEC 2019-04-09
100W Constant Power Mode DriverLED XLG-100 series
4 ~ 8A
Adjustable for A/AB-Type only (via the built-in potentiometer)
MODEL
RATED CURRENT
RATED POWER
FULL POWER CURRENT RANGE
OUTPUT
CURRENT ADJ RANGE.
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT(Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING HUMIDITY
STORAGE TEMP HUMIDITY.,
VIBRATION
OVER TEMPERATURE
47 ~ 63Hz
1.1A / 115 0.5A / 230 0.42A / 277VAC VAC VAC
<0.75mA / 277VAC
20 ~ 95% non-condensingRH
-40 ~ +80 , 10 ~ 95% non-condensingRH
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
ENVIRONMENT
SAFETY &
EMC
PROTECTION
SHORT CIRCUIT
92.5% 91%
COLD START VAC50A(t =300 s measured at 50% I ) at 230 ;width peakμPer 410NEMA
TOTAL HARMONIC DISTORTION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:4.2 I/P- :2.1 O/P- :1.5KVAC FG KVAC FG KVAC
I/P-O/P, I/P- , O/P- :100M Ohms / 500 / 25 / 70%FG FG VDC RH
CONSTANT CURRENT REGION
MAX NO PSU. . of s on 16A
CIRCUIT BREAKER 8 unit(circuit breaker of type B) / 14 units(circuit breaker of type C) at 230VAC
(Please refer to " " ang "section)STATIC CHARACTERISTIC DRIVING METHODS OF LED MODULE
100 ~ 305 142 ~ 431VAC VDC VDC
OPEN CIRCUIT VOLTAGE (max.)
TEMP. COEFFICIENT ±0.03%/ (0 ~ 60 )℃℃
SPECIFICATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7.Only for XLG-100 I series
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less.
12. Products sourced from the Americas regions may not have the PSE/CCC/BIS/KC logo. Please contact your MEAN WELL sales for more information.
13. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
1006.16K hrs min. Telcordia SR-332 (Bellcore) ; 276.37Khrs min. MIL-HDBK-217F (25 )
140 63**32mm (L*W*H)
0.58Kg;24pcs /15Kg /0.85CUFT
100W Constant Power Mode DriverLED XLG-100 series
WORKING TEMP. Tcase=-40 ~ +90 (Please refer to " vs " section)OUTPUT LOAD TEMPERATURE
MAX CASE TEMP.. Tcase=+90
0.97 / 115 , 0.95 / 230 full loadPF VAC PF VAC≧≧≧, 0.92 / 277 atPF VAC
(Please refer to " " )Power Factor Characteristic section
THD VAC VAC VAC< 10% (@ load 50% at 115 /230 ,@load 75% at 277 )≧≧
Please refer to ( )” sectionTOTAL HARMONIC DISTORTION THD
CURRENT RIPPLE 3.0%(@rated current)
CURRENT TOLERANCE ±5%
SET UP TIME 500ms/230 , 1200ms/115VAC VAC
STANDBY
POWER CONSUMPTION
UL8750 ENEC EN61347-1, EN61347-2-13 independent, EN62384(type”HL”), UL879, CSA C22.2 No. 250.13-12; ;
GB19510.1 GB19510.14,; EAC TP TC 004; IP67 approved
100W
700mA
71 ~ 142V
149V
350~1050mA
700~1050mA
XLG-100-L-
100W
2100mA
27 ~ 56V
60V
875~2780mA
1750~2780mA
XLG-100-H-
Hiccup mode, recovers automatically after fault condition is removed
Standby power consumption <0.5W for AB-Type(Dimming OFF)(for standard version)
OVER POWER 105 ~ 150%
INPUT OVER VOLTAGE
Note.7
320 ~ 390 (Shut down output voltage when the input voltage exceeds protection voltage)VAC
can survive input voltage stress of 440Vac for 48 hours
EMC IMMUNITY
EMC EMISSION
Parameter
Conducted
Radiated
Harmonic Current
Voltage Flicker
EN61547
Parameter
ESD
Radiated
EFT/Burst
Surge
Conducted
Magnetic Field
Voltage Dips and Interruptions
Standard
EN55015(CISPR15)
EN55015(CISPR15)
EN61000-3-2
EN61000-3-3
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level/Note
-----
-----
Class C @load≥50%
-----
Test Level/Note
Level 3, 8KV air ; Level 2, 4KV contact
Level 3
Level 3
4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Level 3
Level 4
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
File Name:XLG-100-SPEC 2019-04-09
Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
Shut down output voltage, re-power on to recover
160 ~ 220V 66 ~ 90V
OVER VOLTAGE
20V
25V
30V
35V
40V
45V
50V
55V
60V
0mA 500mA 1000mA 1500mA 2000mA 2500mA 3000mA
1750mA,56V
875mA, 56V
1750mA,27V 2800mA,27V
2780mA,36V
BLOCK DIAGRAM
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
350mA, 142V 700mA, 142V
1050mA, 95V
1050mA, 71V700mA, 71V
60V
70V
80V
90V
100V
110V
120V
130V
140V
150V
0mA 200mA 400mA 600mA 800mA 1000mA 1200mA
100W Constant Power Mode LED Driver XLG-100 series
File Name:XLG-100-SPEC 2019-04-09
DIM+
DIM-
(AB Type)
DETECTION
PWM CIRCUIT
O.L.P.
EMI FILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS +V
-V
I/P
FG
CONTROL
O.V.P.
&
O.C.P.
PFC
CIRCUIT
PFC
CONTROL
DRIVING METHODS OF LED MODULE
-I V Operating Area
XLG-100-L
Recommend Performance Region Recommend Performance Region
XLG-100-H
O.T.P.
XLG-100-12,24
This series is able to work in either Constant Current mode (a
direct drive way) or Constant Voltage mode (usually through
additional DC/DC driver) to drive the LEDs.
Typical output current normalized by rated current (%)
100
60
(min.)
Vo(%)
50 100 Io(%)
(B)
Constant
Current area
(C)
Hiccup
Protection
(A)
Constant
V areaoltage
In the constant current
depends on the configuration
Should there be any
at the output of the driver
region, the highest voltage
of the end systems.
compatibility issues, please
please contact MEAN WELL.
100W Constant Power Mode LED Driver XLG-100 series
File Name:XLG-100-SPEC 2019-04-09
DIMMING OPERATION
3 in 1 dimming function (for AB-Type)
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100 A (typ.)•μ
Applying additive 0 ~ 10VDC
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
Applying additive resistance:
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< out<8%.I
2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.Ω
Vo+
Vo-
DIM+
DIM-
++
+
--
-
DO NOT connect "DIM- to Vo-"
Additive Voltage
Vo+
Vo-
DIM+
DIM-
++
--
DO NOT connect "DIM- to Vo-"
Additive PWM signal
Vo+
Vo-
DIM+
DIM-
++
--
DO NOT connect "DIM- to Vo-"
Additive Resistance
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
0%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
Dimming input: Additive voltage
Duty cycle of additive 10V PWM signal dimming input
Short
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized )dimming operation
Dimming input: Additive resistance
XLG-100
FG(Green/Yellow)
AC/L(Brown)
AC/N(Blue)
DIM-(White)
DIM+( )Blue
Vo+(Red)
Vo-(Black)
100W Constant Power Mode LED Driver XLG-100 series
File Name:XLG-100-SPEC 2019-04-09
-40 -30 0 10 30 50 70 90
20
40
60
80
100
OUTPUT LOAD vs TEMPERATURE
STATIC CHARACTERISTIC
Tcase ( )
LOAD (%)
(HORIZONTAL)
AMBIENT TEMPERATURE,Ta ( )
LOAD (%)
(HORIZONTAL)
PF
(300W)
INPUT VOLTAGE (V) 60Hz
LOAD (%)
LOAD
POWER FACTOR (PF) CHARACTERISTIC
EFFICIENCY vs LOAD
XLG-100 series possess superior working efficiency that up to 92.5% can
be reached in field applications.
EFFICIENCY(%)
LOAD
Tcase at 75
TOTAL HARMONIC DISTORTION (THD)
LOAD
Model, Tcase at 75XLG-100-L
Constant Current Mode
100 140 160 180 200 220 240 260 280 305
100
90
80
70
60
50
40
Model, Tcase at 75XLG-100-L
230VAC
Input only
THD
0.84
0.86
0.88
0.9
0.92
0.94
0.96
0.98
1
50% 60% 70% 80% 90% 100%
277V
230V
115V
60
64
68
72
76
80
84
88
92
96
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V
230V
115V
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
11%
12%
50% 60% 70% 80% 90% 100%
277V
230V
115V
110
If XLG-100 operates in Constant Power mode with the rated
current the maximum workable Ta is 60 (Typ. 230VAC)
-40 -30 -10 0 15 30 50 60 70
20
40
60
80
100
230VAC
Input only
100VAC
230VAC
0
20
40
60
80
100
120
25 30 35 40 45 50 55 60 65 65 70 75 80 85 90
100W Constant Power Mode LED Driver XLG-100 series
File Name:XLG-100-SPEC 2019-04-09
LIFE TIME
Tc a s e ()
LIFETIME(Kh)
100W Constant Power Mode LED Driver XLG-100 series
File Name:XLG-100-SPEC 2019-04-09
MECHANICAL SPECIFICATION Case No.:275B Unit:mm
4- 4.5Φ
134
140
125
32
24
tc 57
300±20 300±20
: Max. Case Temperature
tc
40
63
SJOW 17AWGx3C
&H05RN-F 3x1.0mm2
AC/L(Brown)
AC/N(Blue)
FG(Green/Yellow)
SJOW 17AWGx2C
&05RN-F 2x1.0mm2
Blank-Type
Vo+(Red)
Vo-(Black)
Vo+(Red)
Vo-(Black)
Vo+(Red)
Vo-(Black)
SJOW 14AWGx2C (for 12V)
4- 4.5Φ
134
140
125
37.43
12.31 32
24
tc 57
300±20 300±20
: Max. Case Temperature
tc
40
63
SJOW 17AWGx3C
&H05RN-F 3x1.0mm2
AC/L(Brown)
AC/N(Blue)
FG(Green/Yellow)
SJOW 17AWGx2C
&05RN-F 2x1.0mm2
A-Type
Vo+(Red)
Vo-(Black)
Vo+(Red)
Vo-(Black)
Vo+(Red)
Vo-(Black)
SJOW 14AWGx2C (for 12V)
100W Constant Power Mode LED Driver XLG-100 series
File Name:XLG-100-SPEC 2019-04-10
MECHANICAL SPECIFICATION
4- 4.5Φ
24
tc 57
134
140
125
32
300±20 300±20
: Max. Case Temperature
tc
40
63
SJOW 17AWGx3C
&H05RN-F 3x1.0mm2
AC/L(Brown)
AC/N(Blue)
FG(Green/Yellow)
AB-Type
INSTALLATION MANUAL
DIM-(White)
DIM+( )Blue
Vo+(Red)
Vo-(Black)
DIM-(White)
DIM+( )Blue
SJOW 17AWGx2C
&05RN-F 2x1.0mm2
UL2517 20AWGx2C
3520
Case No.:275B Unit:mm
37.43
12.31
DIM-(White)
DIM+( )Blue
Vo+(Red)
Vo-(Black)