11-21/T3D-AQ1R1QY/2T - Everlight International Corp.

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Technical Data Sheet

1206 Package Chip LED with Inner Lens

11-21/T3D-AQ1R1QY/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 11-21 SMD Taping is much smaller than

lead frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide Chip

Part No. Material Emitted Color Resin Color

11-21/T3D-AQ1R1QY/2T InGaN Pure White Yellow Diffused

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Package Outline Dimensions

-+

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Absolute Maximum Ratings (Ta=25 )℃

Parameter Symbol Rating Unit

Reverse Voltage VR5 V

Forward Current IF25 mA

Peak Forward Current

(Duty 1/10 @1KHz) IFP 100 mA

Power Dissipation Pd 110 mW

Electrostatic Discharge(HBM) ESD 150 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec.℃

Hand Soldering : 350 for 3 sec.℃

Electro-Optical Characteristics (Ta=25 )℃

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv 72.0 ----- 140 mcd

Viewing Angle 2θ1/2 ----- 70 ----- deg

Forward Voltage VF2.70 ----- 3.20 V

IF=5mA

Reverse Current IR----- ----- 50 μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Forward Voltage ±0.05V

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Bin Range Of Luminous Intensity & Forward Voltage

Symbol Bin Code Min. Max. Unit Condition

Q1 72.0 90.0

Q2 90.0 112

Iv

R1 112 140

mcd IF=5mA

29 2.70 2.80

30 2.80 2.90

31 2.90 3.00

32 3.00 3.10

VF

33 3.10 3.20

V IF=5mA

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Forward Voltage ±0.05V

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Chromaticity Coordinates Specifications for Bin Grading

Groups Bin Code CIE_x CIE_y Condition

0.274 0.226

0.274 0.258

0.294 0.286

1

0.294 0.254

0.274 0.258

0.274 0.291

0.294 0.319

2

0.294 0.286

0.294 0.254

0.294 0.286

0.314 0.315

3

0.314 0.282

0.294 0.286

0.294 0.319

0.314 0.347

4

0.314 0.315

0.314 0.282

0.314 0.315

0.334 0.343

5

0.334 0.311

0.314 0.315

0.314 0.347

0.334 0.376

A

6

0.334 0.343

IF=5mA

Notes:

1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).

2.The products are sensitive to static electricity and care must be fully taken when

handling products.

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

CIE Chromaticity Diagram

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Typical Electro-Optical Characteristics Curves

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition Test

Hours/Cycles

Sample

Size Ac/Re

1 Reflow Soldering Temp. : 260 ±5

℃ ℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100 15min

℃

∫ 5 min

L : -40 15min℃

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100 5min

℃

∫ 10 sec

L : -10 5min℃

300 Cycles 22 PCS. 0/1

4High Temperature

Storage Temp. : 100℃1000 Hrs. 22 PCS. 0/1

5Low Temperature

Storage Temp. : -40℃1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7High Temperature /

High Humidity 85 / 85%RH

℃1000 Hrs. 22 PCS. 0/1

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.℃

2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less.℃

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5 for 24 hours.℃

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-21/T3D-AQ1R1QY/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 12

Device No. : SZDSE-111-T02 Prepared date:11-May-2007 Prepared by: Zheng Linyan

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds℃

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com