LENGTH (Mxxx = Meters) (Exxx = Feet) A1 - - 08 OCT 15 TECHNICAL DATA SHEET RELEASE JLAG - 29.00MM 7.0MM 0.5 25.40MM BLACK WHITE RED GRN/YEL PIN 3 PIN 4 WIRING DIAGRAM 1 2 3 4 PIN 1 PIN 2 FACE VIEW TECHNICAL DATA: Risk of Electrical Shock Do Not Disconnect Under Load. Risque de chocs electriques Ne pas debrancher sous tension. 1) MATERIALS: COUPLING NUT: MACHINED ALUMINUM, ANODIZED INSULATION INSERT: THERMOPLASTIC, UL 94/V-0 CONTACT: GOLD FLASH PLATING OVER COPPER ALLOY CABLE RATING: UL LISTED TYPE 1015, CSA CERTIFIED TYPE TEW, FT1 FLAME RATING, 600V, 105C CABLE JACKET MATERIAL: PVC CONDUCTOR INSULATION: PVC NUMBER OF CONDUCTORS: (4) 16AWG WARNING TOLERANCE 2) ELECTRICAL DATA: CURRENT (MAX): 10A VOLTAGE (MAX): 600V AC/DC INSULATION RESISTANCE (MIN): 5000M OHMS DIELECTRIC TEST VOLTAGE: 2200V 3) MECHANICAL DATA: TEMPERATURE RANGE: -20C TO +105C PROTECTION: IP67 (MATED CONDITION) MATING CYCLES: >500 VIBRATION RESISTANCE PER MIL-STD-202 METHOD 204 THERMAL SHOCK PER MIL-STD-202 METHOD 207 48 HOUR SALT SPRAY PER MIL-STD-202 METHOD 101 4) RoHS COMPLIANT 5) UL 2238 LISTED ASSEMBLY UL FILE NUMBERS: E224856 UNLESS OTHERWISE SPECIFIED All dimensions are in metric(mm). Tolerances are as follows: PL DEC 0.30 Fractions 1/64 PL DEC 0.15 Angles 1 PL DEC 0.08 3) Note reference = 0-9.99 FT = +4" / -1" 3-8.99 M = +150.0/-25.0mm 10.00-29.99 FT = +6" / -1" 9-14.99 M = +300.0/-25.0mm 30.00-49.99 FT = +12" / -1" 15-OVER M = +450.0/-25.0mm 50 FT-OVER = +18" / -1" DESCRIPTION PART NUMBER MATERIALS LIST QUANTITY 1) 2) 1 2 3 0-2.99 M = +100.0/-25.0mm X SIGNATURES DRAWN: CHECKED: ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: NEXT ASS'Y: KMM MRF KMM RFC Amphenol DATE 12-MAY-14 12-MAY-14 12-MAY-14 ITEM Sine Systems - www.sineco.com 44724 Morley Drive Clinton Township, MI 48036 MINIBOSS M22 (7/8"), 4 PIN, Male Receptacle, External threads, 16 AWG, UL1015, PVC Wire THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE CHALF DWG NO: REVISION MN41PW02M MN41PW02M SHEET A1 1 OF 1