POWER SIL/SMT40C2 Series C-Class Non-Isolated Data Sheet Total Power: Input Voltage: # of Outputs: 40 Amps 4.5 - 13.8 Vdc Single SPECIAL FEATURES 40 A current rating Input voltage range: 4.5 - 13.8 Vdc Output voltage: 0.6 - 5 V Industry-leading value Cost optimized design Excellent transient response Electrical Specifications Output enable Input output voltage adjustability Input voltage range path for future upgrades Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) See Note 3 25 A @ lo max. Start-up time Remote ON/OFF 3 ms Supports silicon voltage migration Reduced design-in and qual time RoHS compliant 4.5 - 13.8 Vdc Output SAFETY Output voltage See Note 5 0.6 - 5 V UL, cUL CAN/CSA 22.2 No. E139421 UL6950 File No. TBD Output setpoint accuracy 0.1% trim resistors 1.0% Line regulation Low line to high line 0.2% TUV Product Service (EN60950) Load regulation Full load to min. load 0.5% Certificate No. TBD Min./max. load CB report and certificate to IEC60950 Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise 5 Hz to 20 MHz See Note 1 25 mV Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation 50 s recovery to within regulation band Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 20 A 94% Switching frequency Fixed 500 kHz 0 A/40 A General Material flammability UL94V-0 Weight 17 g (0.06 oz.) MTBF 12 V @ 40 C, 100% load Bellcore 332 6,749,409 hours Coplanarity Surface mount models 150 m SIL/SMT40C2 Series Data Sheet Environmental Specifications Thermal performance Operating ambient temperature -0 C to +70 C See Note 5 Non-operating temperature -40 C to +125 C Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 F Output See Note 7 0 F Ordering Information Model Number (3,5) Regulation Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Line Load SIL40C2-00SADJ-VJ 4.5 - 13.8 Vdc 0.6 - 5 V 0A 40 A 94% 0.2% 0.5% SIL40C2-00SADJHJ 4.5 - 13.8 Vdc 0.6 - 5 V 0A 40 A 94% 0.2% 0.5% SMT40C2-00SADJJ 4.5 - 13.8 Vdc 0.6 - 5 V 0A 40 A 94% 0.2% 0.5% Part Number System with Options Product Family SIL SIL = Single In Line SMT = Surface Mount Rated Output Current Performance Generation 40 C 2 06 = 6 Amp 15 = 15 Amp 20 = 20 Amp 30 = 30 Amp 40 = 40 Amp C = Cost Optimized Input Voltage Output Voltage 00 SADJ - Blank = Standard 2 = Increased current density Output Voltage Adjustment 00 = 4.5 - 13.8 V Mounting Option - Single Adjustable Output V V = Vertical H = Horizontal Power Good 6 Enable 5 V in 10,11 7,8 6. No capacitors needed for ripple current stability. C out 4 C in 7. No capacitors needed for stability. 9. To order a Horizontal Mounting option with a pin length of 0.165", please use model SIL40C2-00S-HP5. +R sense SIL40C2 5. Airflow dependent, 100 LFM minimum required. 8. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.Artesyn.com/power to find a suitable alternative. V out 1,2,3 9 2. di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.75 lo to full lo and full lo to 0.75. 4. Additional part numbers may be available with different output voltages. J = Pb free (RoHS 6/6 compliant) Standard Application Drawing 1. Measured as per recommended system capacitance. 3. External input fusing is recommended. J (Applicable to SIL version only) The ultra-wide output voltage trim range offers major advantages to users who select the SIL40C2 series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.6-5 V. When the SIL40C2 converter leaves the factory, the output has been adjusted to the default voltage of 0.6 V. Notes: RoHS Compliance R trim (for trim down) GND R L O A D SIL/SMT40C2 Series Data Sheet Mechanical Drawings Vertical Mount Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) 1.200 (30.48) 0.427 (10.85) 0.255 (6.48) 1.100 (27.94) 0.062 (1.57) REF 0.110 (2.79) 0.050 (1.27) REF PIN 1 0.140 (3.56) TYP 0.100 (2.54) 0.100 (2.54) TYP 9 PLACES 1.050 (26.67) 0.050 (1.27) TYP 0.025 (0.64) .001 SQ PINS TYP Horizontal Mount Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) 1.200 (30.48) 0.468 (11.89) 0.062 (1.57) REF 0.255 (6.48) 1.100 (27.94) .150 (3.81) TYP PIN 1 0.110 (2.79) REF 2X 1.000 (25.40) 0.025 (0.64) .001 SQ PINS TYP 13 PLACES 0.050 (1.27) REF 0.100 (2.54) TYP 9 PLACES 2X 1.050 (26.67) 0.050 (1.27) 0.100 (2.54) REF SIL/SMT40C2 Series Data Sheet Mechanical Drawings Mating Connectors Surface Mount Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) 0.062 (1.57) REF 0.125 (3.18) TYP 0.442 (11.23) 0.255 (6.48) 0.110 (2.79) REF 1.200 (30.48) 1.100 (27.94) 2X 1.000 (25.40) 0.050 (1.27) REF PIN 1 0.100 (2.54) TYP 9 PLACES 2X 1.050 (26.67) Pin Assignments 0.050 (1.27) 0.100 (2.54) REF Pin Function 1 2 3 4 5 6 7 8 9 10 11 12 13 Vout Vout Vout Trim Enable Power Good Ground Ground (+) Sense Vin Vin Mech Pin (Horz/SMT only) Mech Pin (Horz/SMT only) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. (c) 2015 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com SIL/SMT40C2 Series 24Mar2015