321
©2008 Littelfuse, Inc.
Revised: August 29, 2008
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
321
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Kxxx0yH Series
High Energy Bidirectional SIDACs
High Energy SIDACs
Kxxx0yH Series
Description
The new Kxxx0yH is a higher energy SIDAC switch for gas
ignition applications requiring higher current pulse current
especially at low repetition rate. It is offered in a DO-15 and
TO-92 leaded packages as well as DO-214 surface mount
package. Voltage activation of this solid state switch is
accomplished with peak voltage level of 190 to 280Volts. The
SIDAC is a silicon bilateral voltage triggered Thyristor switch
that switches on through a negative resistance region to a
low on-state voltage. Conduction will continue until current
is interrupted or lowered below minimum holding current of
the device.
Features
Electrical Specifications (T
J = 25°C, unless otherwise specified)
Symbol Parameters Test Conditions Min Max Unit
VBO Breakover/Trigger Voltage
K2000yH 190 215
V
K2200yH 205 230
K2400yH 220 250
K2500yH 240 280
VDRM Repetitive Peak Off-state Voltage
K2000yH 180
V
K2200yH 180
K2400yH 190
K2500yH 200
IT(RMS) On-state RMS Current 50/60Hz, T
J < 125°C 1 A
VTM Peak On-state Voltage IT = 1A 1. 5 V
IHDynamic Holding Current RL = 100Ω
50/60Hz Sine Wave 150 mA
RS
(VBOVS)
Switching Resistance, RS=________
(IS – IBO)
50/60Hz Sine Wave 100 8
IBO Breakover Current 50/60Hz Sine Wave 50 μA
ITRM
Peak Repetitive Pulse Current
(refer to figure 4) tp = 10μs 60Hz 120 A
5Hz 280
di/dt Critical Rate of Rise of On-State Current 150 A/μs
dv/dt Critical Rate of Rise of Off-State Voltage 1500 V/μs
TSStorage Temperature Range -40 150 °C
T
JJunction Temperature Range -40 125 °C
RRJL Thermal Resistance, Junction to Lead DO-15 18 °C/W
DO-214 30
RRJC Thermal Resistance, Junction to Case DO-92 35 °C/W
RRJA Thermal Resistance, Junction to Ambient DO-15 75 °C/W
DO-92 95
Schematic Symbol
Applications
Suitable for high voltage power supplies, natural gas
igniters, and Xenon flash ignition.
t"$$JSDVJU0SJFOUFE
t5SJHHFSJOH7PMUBHFPG
to 280V
t"1VMTF$VSSFOU
Capability
t3P)4$PNQMJBOU
Note: xxx - voltage, y = package
322
Revised: August 29, 2008
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
High Energy Bidirectional SIDACs
Kxxx0yH Series
Figure 1: V-I Characteristics
-V
+I
VDRM
+V
VS
IS
IHRS
IDRM
IBO
VBO
VT
IT
(IS-I
BO)
(VBO -V
S)
RS=
-I
0
1
2
3
4
5
6
7
8
9
0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Instantaneous On-state Current (iT) – Amps
Instantaneous On-state Voltage (vT) – Volts
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0.0 0.2 0.4 0.6 0.8 1.0 1.2
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE:
See basic SIDAC circuit in Figure 12
Average On-State Power Dissipation
[PD(AV)] - Watts
RMS On-State Current [IT(RMS)] - Amps
Figure 3: Power Dissipation vs. On-state Current
(Typical)
Figure 2: On-state Current vs. On-state
Voltage (Typical)
1
10
100
1000
1 10 100 1000
Pulse Base Width (tO) - us
5 Hz
60 Hz
1 kHz
5 kHz
di/dt Limit Line
Repetitive Peak On-State Current (ITRM) - Amps
ITM
tO
1/f
Figure 4: Repetitive Peak On-state Current (ITRM)
vs. Pulse Width at Various Frequencies
1
10
100
1 10 100 1000
Surge Current Duration -- Full Cycle
s
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS ON-STATE CURRENT: I
T
RMS Maximum Rated
Value at Specified Junction Temperature
Notes:
1) Blocking capability may be lost during
and immediately following surge
current interval.
2) Overload may not be repeated until
junction temperature has returned
to steady-state rated value.
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
Figure 5: Surge Peak On-state Current
vs. Number of Cycles
Figure 6: Normalized VBO Change
vs. Junction Temperature
-8%
-6%
-4%
-2%
0%
2%
4%
6%
8%
10%
-40 -20 0 20 40 60 80 100 120 140
Junction Temperature (TJ) -- °C
VBOChange -- %
323
©2008 Littelfuse, Inc.
Revised: August 29, 2008
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
323
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Kxxx0yH Series
High Energy Bidirectional SIDACs
High Energy SIDACs
Figure 7: Normalized DC Holding Current
vs. Junction Temperature
125
0.0
0.5
1.0
1.5
2.0
-40 -15 10 35 60 85 110
Junction Temperature (TJ) -- °C
Ratio of IH / IH (TJ = 25°C)
80
90
100
110
120
130
0.0 0.2 0.4 0.6 0.8 1.0 1.2
CURRENT WAVEFORM: Sinusoidal - 60Hz
LOAD: Resistive or Inductive
Kxxx0GH
Kxxx0SH
Kxxx0EH
Maximum Allowable Lead/Case
Temperature (TC) - °C
RMS On-State Current [IT(RMS)] - Amps
20
40
60
80
100
120
140
0.0 0.2 0.4 0.6 0.8 1.0
CURRENT WAV EFORM : Sinus o id al - 60Hz
LOAD: Resistive or Inductive
FREE AIR RA TING
Kxxx0GH
Kxxx0SH
Kxxx0EH
Maximum Allowable Ambient
Temperature (T
A
) - °C
RMS On-State Current [I
T(RMS)
] - Amps
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
Figure 8: Maximum Allowable Case Temperature
vs. RMS On-State Current
1
10
20 30 40 50 60 70 80 90 100 110 120 130
Repetitive Peak Breakover
Current (IBO) Multiplier
Junction Temperature (TJ) -- °C
Figure 10: Normalized Repetitive Peak Breakover
Current (IBO) vs. Junction Temperature
100-250 V ac
60 Hz
Scope
Push to test
S1 Switch to test
in each direction
100
1%
Device
Under
Test
S1
Scope Indication
Trace Stops
IH
IPK
Figure 11: Dynamic Holding Current Test
Circuit for SIDACs Figure 12: Basic SIDAC Circuit
Load
100-250 V ac
60 Hz IH
VBO
120-145˚
Conduction
Angle
IH
IH
Load Current
VBO
VBO
324
Revised: August 29, 2008
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
High Energy Bidirectional SIDACs
Kxxx0yH Series
VDC(IN) VB0 VC
ILRL
R
SIDAC
(a) Circuit
Rmax
VIN -V
BO
IBO
Rmin
VIN -V
TM
IH (MIN)
(b) Waveforms
VBO
VC
IL
t
t
C
Figure 13: Relaxation Oscillator Using a SIDAC Figure 14: General Gas Ignitor Circuit
100-250 V ac
60 Hz
100-250 V ac
60 Hz
SCR Sidac
Soldering Parameters
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak 5°C/second max
TS(max) to TL - Ramp-up Rate 5°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Temperature (tL)60 – 150 seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20 – 40 seconds
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
Time
Temperature
TP
TL
TS(max)
TS(min)
25
tP
tL
tS
time to peak temperature
Preheat
P
reheat
Ramp-upRamp-up
Ramp-down
R
am
p
-
do
325
©2008 Littelfuse, Inc.
Revised: August 29, 2008
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
325
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Kxxx0yH Series
High Energy Bidirectional SIDACs
High Energy SIDACs
Physical Specifications Reliability/Environmental Tests
Test Specifications and Conditions
High Temperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition
A Rated VDRM (VAC-peak), 125°C, 1008
hours
Temperature Cycling
MIL-STD-750: Method 1051
-40°C to 150°C, 15-minute dwell, 100
cycles
Biased Temperature &
Humidity
EIA/JEDEC: JESD22-A101
(VDC), 85°C, 85%RH, 1008 hours
High Temp Storage MIL-STD-750: Method 1031
150°C, 1008 hours
Low-Temp Storage -40°C, 1008 hours
Thermal Shock
MIL-STD-750: Method 1056
0°C to 100°C, 5-minute dwell, 10-second
transfer, 10 cycles
Autoclave
(Pressure Cooker Test)
EIA/JEDEC: JESD22-A102
121°C, 100%RH, 2atm, 168 hours
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability ANSI/J-STD-002: Category 3
Repetitive Surge
Life Testing MIL-STD-750: Method 2036, Condition E
Terminal Material Copper Alloy
Terminal Finish 100% Matte Tin-plated /Pb Free
solder dipped.
Body Material UL recognized epoxy meeting flammability
classification 94V-0.
Design Considerations
Dimensions — DO-214
Dimension Inches Millimeters
Max Max Min Max
A 0.130 0.156 3.30 3.95
B 0.201 0.220 5.10 5.60
C 0.077 0.087 1.95 2.20
D 0.159 0.181 4.05 4.60
E 0.030 0.063 0.75 1.60
F 0.075 0.096 1.90 2.45
G 0.002 0.008 0.05 0.20
H 0.077 0.104 1.95 2.65
J 0.043 0.053 1.09 1.35
K 0.006 0.016 0.15 0.41
L 0.030 0.055 0.76 1.40
B
D
A
C
H
EJ G
KF
L
CASE TEMPERATURE
MEASURING POINT
0.079"
(2.0mm)
0.079"
(2.0mm)
0.110"
(2.8mm)
Recommended
Soldering Pad Outline
Careful selection of the correct device for the applications
operating parameters and environment will go a long
way toward extending the operating life of the Thyristor.
Overheating and surge currents are the main killers of
SIDACs. Correct mounting, soldering, and forming of the
leads also help protect against component damage.
326
Revised: August 29, 2008
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
High Energy Bidirectional SIDACs
Kxxx0yH Series
Dimension Inches Millimeters
Max Max Min Max
ØB 0.028 0.034 0.711 0.864
ØD 0.120 0.140 3.048 3.556
G 0.235 0.270 5.969 6.858
L 1.000 25.400
Dimensions — DO-15
Dimension Inches Millimeters
Max Max Min Max
A 0.176 0.196 4.47 4.98
B 0.500 12.70
D 0.095 0.105 2.41 2.67
E 0.150 3.81
F 0.046 0.054 1.16 1.37
G 0.135 0.145 3.43 3.68
H 0.088 0.096 2.23 2.44
J 0.176 0.186 4.47 4.73
K 0.088 0.096 2.23 2.44
L 0.013 0.019 0.33 0.48
M 0.013 0.017 0.33 0.43
N 0.060 1.52
Dimensions - TO-92 with Type 70 Lead Form
LL
G
ØD
ØB
Temperature Measuring Point
A
B
MT2
MT1
E
HG
F
D
L
M
N
Temperature Measuring Point
Product Selector
Part Number Switching Voltage Range Blocking Voltage Packages
VBO Minimum VBO Maximum VDRM DO-15DO-214 TO-92
K2000yH 190V 215V 180V K2000GH K2000SH K2000EH70
K2200yH 205V 230V 180V K2200GH K2200SH K2200EH70
K2400yH 220V 250V 190V K2400GH K2400SH K2400EH70
K2500yH 240V 280V 200V K2500GH K2500SH K2500EH70
Note: y = package
Notes:
1. Type 70 lead form as shown is standard for the E package.
2. All leads are insulated from case. Case is electrically nonconductive (rated at 16000V ac
rms for one minute from leads to case over the operating temperature range.)
3. Mold flash shall not exceed 0.13 mm per side.
327
©2008 Littelfuse, Inc.
Revised: August 29, 2008
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
327
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Kxxx0yH Series
High Energy Bidirectional SIDACs
High Energy SIDACs
Packing Options
Part Number Marking Weight Packaging Mode Base Quantity
Kxxx0GH Kxxx0GH 0.38g Bulk 1000
Kxxx0GHRP Kxxx0GH 0.38g Reel Pack 5000
Kxxx0SHRP KxxSH 0.1g Reel Pack 2500
Kxxx0EH70 Kxxx0EH 0.17g Bulk 2000
Kxxx0EH70AP Kxxx0EH 0.17g Ammo Pack 2000
Kxxx0EH70RP2 Kxxx0EH 0.17g Reel Pack 2000
Kxxx0EH70RP3 Kxxx0EH 0.17g Reel Pack 2000
Note: xxx or xx = voltage
DO-214 Embossed Carrier Reel Pack (RP) Specifications
0.472
(12.0) 0.36
(9.2)
0.315
(8.0)
0.157
(4.0)
0.49
(12.4)
0.512 (13.0) Arbor
Hole Dia.
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
Direction of Feed
0.059 DIA
(1.5) Cover tape
Meets all EIA-481-1 Standards
328
Revised: August 29, 2008
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
High Energy Bidirectional SIDACs
Kxxx0yH Series
DO-15 Reel Pack (RP) Specifications
DO-15
0.252
(6.4)
0.898
(22.8)
0.197
(5.0)
2.063
(52.4) 3.15 (80.0) TYP
Dimensions
are in inches
(and millimeters).
Direction of Feed
10.0 - 14.0
(254.0 - 356.0)
Meets all EIA RS-296 Standards
TO-92 Type 70 Ammo Pack (AP) Radial Leaded Specifications
Flat down
25 Devices per fold
0.708
(18.0)
1.27
(32.2)
0.125 (3.2) MAX
1.62
(41.2)
MAX
0.50
(12.7)
0.354
(9.0)
0.236
(6.0)
0.02 (0.5)
0.20 (5.08)
0.50
(12.7)
0.25
(6.35)
Directionof Feed
Dimensions
are in inches
(and millimeters).
1.85
(47.0)
13.3
(338.0)
12.2
(310.0)
1.85
(47.0)
0.157 DIA
(4.0)
Meets all EIA-468-B 1994 Standards
329
©2008 Littelfuse, Inc.
Revised: August 29, 2008
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
329
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Kxxx0yH Series
High Energy Bidirectional SIDACs
High Energy SIDACs
TO-92 Type 70 Reel Pack (RP3) Optional Specifications
Flat Up
0.708
(18.0)
1.3
(33.1)
0.5
(12.7) 0.1 (2.54)
0.354
(9.0)
0.236
(6.0)
0.02 (0.5)
Direction of Feed
Dimensions
are in inches
(and millimeters).
1.97
(50.0)
14.17
(360.0)
0.95
(24.1)
0.157 DI
A
(4.0)
TO-92 Type 70 Reel Pack (RP2) Standard Specifications
Flat Down
1.62
(41.2)
0.708
(18.0) 0.354
(9.0)
0.236
(6.0)
0.02
(0.5)
0.50
(12.7)
14.17
(360.0)
0.20
(5.08)
0.125 (3.2) MAX
1.27
(32.2)
1.97
(50.0)
0.50
(12.7)
0.25
(6.35)
Dimensions
are in inches
(and millimeters).
Direction of Feed
0.157 DIA
(4.0)
330
Revised: August 29, 2008
©2008 Littelfuse, Inc.
Teccor® brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
High Energy Bidirectional SIDACs
Kxxx0yH Series
Part Numbering System Part Marking System
K240 0 70 RP
DEVICE TYPE
K: Sidac
VOLTAGE
200: 190 to 215V
220: 205 to 230V
240: 220 to 250V
250: 240 to 280V
CURRENT FUNCTION
0: Standard
PACKAGE TYPE
G: DO-15
S: DO-214
E: TO-92
LEAD FORM DIMENSIONS
xx: Lead Form Option
HIGH-ENERGY SIDAC
PACKAGING OPTIONS
[Blank]: Bulk
AP: Ammo
RP: Reel
RP2: Reel
RP3: Reel
HE
yxxxx
K24SH
DO-214
K2400GH
yxxxx
DO-15
TO-92
K2400EH
yxxxx
®
®
®
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Littelfuse:
K2000EH70 K2000EH70AP K2000EH70RP2 K2000EH70RP3 K2000GH K2000SHRP K2200EH70
K2200EH70AP K2200EH70RP2 K2200EH70RP3 K2200GH K2200SHRP K2400EH70 K2400EH70AP
K2400EH70RP2 K2400GH K2400SHRP K2500EH70 K2500EH70AP K2500EH70RP3 K2500GH K2500SHRP
K2500GHRP K2000GHAP K2500EH70RP2 K2000GHRP