PM2.5 SENSOR MODULE / TEMPERATURE AND HUMIDITY SENSOR Sensor PM2.5 Sensor Module Features (1) Easy assembly for use in air purifiers and other products thanks to small size of 53 x 40 x 51 mm (2) Industry's shortest*1 detection time of 10 seconds (3) Digital output model is also part of line-up *1 As of May 1, 2015 (measured by Sharp) Analog output type: DN7C3CA007 Digital output type: DN7C3CD015 Standard Specifications DN7C3CA007 [Overseas] Model No. Measuring range (g/m3) DN7C3CD015 [Japan / Overseas] 25 to 500 25 to 500 Output type Analog voltage Digital PWM Power supply voltage (Vcc/fan) DC5 V / DC5 V DC5 V / DC5 V Power consumption (mW) (TYP.) At sensor: 55, At fan: 450 At sensor: 75, At fan: 450 Output voltage range (V) 0 to 5 (MAX.) Vhigh: Vcc-1.5 (MIN.), Vlow: 1.3 (MAX.) Operating temperature range (C) Outline dimensions (mm) Temperature -10 to +60 -10 to +60 53.0 x 40.0 x 51.0 (excluding protruding parts) 53.0 x 40.0 x 51.0 (excluding protruding parts) and Humidity Sensor Features (1) Package: 3.0 x 3.0 x 0.8 mm, reflowable, QFN (2) Interface: I2C Standard Specifications Model No. Sensor Type Measuring range Temperature sensor Macromolecule capacity Semiconductor 0 to 100% RH -20 to +85C Accuracy 2% RH (25C) 0.3C Resolution 0.1% RH 0.015C Interface 50 QM1H0P00xx Humidity sensor I2C Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.