Solder-In Style High Temp EMI Filters ZS/ZR Series - .128 Dia. - Circuits Available - C & L APPLICATIONS The ZS series provides effective filtering in the MICROWAVE frequency spectrum from 10 MHz through 26 GHz. Designed to be soldered into a package, bracket or bulkhead (and maintain hermeticity), it is ideal for high impedance circuits where large capacitance values are not practical. In the "L" section version an internal ferrite bead element provides both induc- tance and series resistance (lossy characteristic) which improves insertion loss and provides superior transient performance. Alternate lead lengths or special capacitance values may be ordered. Custom packages or bracket assemblies utilizing this feedthru can be furnished to your specifications. CHARACTERISTICS * Meets or exceeds the applicable portions of MIL-F-28861/12. See QPL listings. * High temperature construction withstands 300C installation temperatures. * Features rugged monolithic discoidal capacitor construction. * Glass hermetic seal on one end with epoxy seal on the opposite end. * High purity gold plating provides excellent solderability or compatibility with thermal and ultrasonic wire bonding. SPECIFICATIONS 1. Plating: Gold standard - Silver and solder coat available 2. Material: Case: Cold rolled steel Leads: Alloy 52 steel 3. Operating Temperature Range: -55C to +125C 4. Insulation Resistance: At 25C: 1,000 megohm-microfarad min., or 100,000 megohms min., whichever is less At 125C: 100 megohm-microfarad min., or 10,000 megohms min., whichever is less 5. Dielectric Withstanding Voltage (DWV): R-level designs: 2.0 times rated DC voltage Class B, Class S designs: 2.5 times rated DC voltage 6. DC Resistance (DCR): .01 ohm, maximum 7. Dissipation Factor (DF): 3% maximum 8. Rated DC Current: 5 Amps, maximum 9. Maximum Installation Temperature: 300C 10. Supplied with 60/40 solder preform for easy installation 11. Insertion Loss for the "C" and "L" circuits are equivalent due to the saturation characteristic of the ferrite bead element at full rated current. At lower currents the "L" becomes much more effective. STANDARD CONFIGURATION .128 .005 .020 .005 .030 .002 GLASS SEAL A .156 .005 .25 .03 B CIRCUIT DIAGRAMS FLANGE END GLASS SEAL END C ZS1, ZR1 FLANGE END ZS2 millimeters (inches) 0.05 (.002) 3.25 (.128) 0.13 (.005) 3.96 (.156) 0.51 (.020) 5.08 (.200) 0.76 (.030) 6.4 (.25) 0.8 (.03) 15.88 (.625) 2.79 (.110) 18.16 (.715) (See Note 4) (See Note 3) GLASS SEAL END ZR2 Notes: 1. Outline drawing shows standard ZS configuration. Also available with glass seal at the opposite end, ZR reverse configuration. 3. For ZS2 or ZR2 L-Section Filters inductor always positioned at epoxy-filled end. 4. Metric equivalent dimensions given for information only. 2. MIL-F-28861/12 style FS70 equivalent to standard ZS configuration. Style FS71 is reverse ZR configuration. MIL-F-28861/12 (See Note 2) Circuit Diagram Dimensions A B .005 Nom. L .200 .715 C .110 .625 Dash No. 001 through 016, 033 and 034 017 through 032, 035 and 036 Style FS70 FS71 9 Solder-In Style High Temp EMI Filters ZS/ZR Series - .128 Dia. - Circuits Available - C & L SPECIFICATIONS AVX P/N ZS1C2-501H ZS1C2-102H ZS1C2-122H ZS1C2-272H ZS1C2-502H ZS1C2-103H ZS1C2-153H ZS2C2-501H ZS2C2-102H ZS2C2-122H ZS2C2-272H ZS2C2-502H ZS2C2-103H ZS2C2-153H ZS1A2-101H ZS1A2-501H ZS1A2-102H ZS1A2-122H ZS1A2-272H ZS1A2-502H ZS1A2-103H ZS1A2-153H ZS2A2-100H ZS2A2-250H ZS2A2-101H ZS2A2-501H ZS2A2-102H ZS2A2-122H ZS2A2-272H ZS2A2-502H ZS2A2-103H ZS2A2-153H Current AMP 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 CKT C C C C C C C L L L L L L L C C C C C C C C L L L L L L L L L L DC Voltage 50 50 50 50 50 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 CAP Min. 500 1000 1200 2700 5000 .010 .015 500 1000 1200 2700 5000 .010 .015 100 500 1000 1200 2700 5000 .010 .015 10 25 100 500 1000 1200 2700 5000 .010 .015 500 KHz - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Insertion Loss2 Per MIL-STD-220, +25C 1 10 100 1000 MHz MHz MHz MHz - - 15 30 - 4 20 31 - 5 20 35 - 10 25 40 - 15 30 45 4 20 35 48 7 25 40 50 - - 15 30 - 4 20 33 - 5 20 37 - 10 25 40 - 15 30 45 4 20 38 50 7 25 42 50 - - 3 20 - - 15 30 - 4 20 31 - 5 20 35 - 10 25 40 - 15 30 45 4 20 35 48 7 25 40 50 - - - 5 - - - 10 - - 3 20 - - 15 30 - 4 20 33 - 5 20 37 - 10 25 40 - 15 30 45 4 20 38 50 7 25 42 50 10 GHz 50 55 55 60 60 60 60 50 55 55 60 60 60 60 30 50 55 55 60 60 60 60 10 15 30 50 55 55 60 60 60 60 continued 1 Decimal point values indicate capacitance in microfarads. Non-decimal point values indicate capacitance in picofarads. 2 Insertion loss limits are based on theoretical values. Actual measurements may vary due to internal capacitor resonances and other design constraints. NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal opposite the flange end. All parts are capable of the reverse configuration with the glass seal at the flange end. All parameters are otherwise identical. The part number changes from "S" to "R" (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H). For special multi-unit assemblies see Multi-Component Filter Brackets section. 10 Solder-In Style High Temp EMI Filters ZS/ZR Series - .128 Dia. - Circuits Available - C & L SPECIFICATIONS AVX P/N ZS1B2-100H ZS1B2-250H ZS1B2-101H ZS1B2-501H ZS1B2-102H ZS1B2-122H ZS1B2-272H ZS2B2-100H ZS2B2-250H ZS2B2-101H ZS2B2-501H ZS2B2-102H ZS2B2-122H ZS2B2-272H Current AMP 5 5 5 5 5 5 5 5 5 5 5 5 5 5 CKT C C C C C C C L L L L L L L DC Voltage 200 200 200 200 200 200 200 200 200 200 200 200 200 200 1 Decimal point values indicate capacitance in microfarads. Non-decimal point values indicate capacitance in picofarads. 2 Insertion loss limits are based on theoretical values. Actual measurements may vary due to internal capacitor resonances and other design constraints. 1 CAP Min. 10 25 100 500 1000 1200 2700 10 25 100 500 1000 1200 2700 500 KHz - - - - - - - - - - - - - - Insertion Loss2 Per MIL-STD-220, +25C 1 10 100 1000 MHz MHz MHz MHz - - - 4 - - - 10 - - 3 20 - - 15 30 - 4 20 31 - 5 20 35 - 10 25 40 - - - 5 - - - 10 - - 3 20 - - 15 30 - 4 20 33 - 5 20 37 - 10 25 40 10 GHz 10 15 30 50 55 55 60 10 15 30 50 55 55 60 NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal opposite the flange end. All parts are capable of the reverse configuration with the glass seal at the flange end. All parameters are otherwise identical. The part number changes from "S" to "R" (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H). For special multi-unit assemblies see Multi-Component Filter Brackets section. 11